Invoice is getting printed instead of being sent in email

Hi Experts,
I have an issue where there is a list of customers for which invoice should be sent in an email.
It should not get printed out.
I've maintained customer specific condition records for this output type (ZINV) and have kept transmission medium as 5 (External send). But still in invoice, transmission medium is picked as 1 (Print output). This billing type has default value as 1 (Print output). But for these customers, system should have picked up 5 not 1.
I've checked config. I dont see any problem as per my understanding.
Would you please advice if I am missing something?
-Chetan
Edited by: Chetan Barokar on May 6, 2010 8:25 PM

Hi,
Hope the Form and print program are assigned for email comm for the output type in NACE trranscation.
In the condition records(VV33), the communication strategy must be set to 1(Email only) in the communication tab. Also check the access sequence of condition records and make sure that it is not selecting the wrong sequence. Also please check the output determination procedure.
If the above setup exist, the please debug the print program and check whether the device value passed to OPEN_FORM is MAIL and also check whether the sender and recipient values are passed.

Similar Messages

Why are my messages being sent through email rather than iMessage?

Why are my messages being sent as email rather than iMessage?

Not being sent as email - shown as being sent from an email address because you have selected to start new iMessage conversations from your Apple ID email address on your iPhone.
When registering an iPhone with iMessage, the phone number along with your Apple ID email address is registered with it.
Go to Settings > Messages > Send & Receive > Start New Conversations From - select your iPhone's phone number.

Forgot apple id security question answers - reset email is not being sent to email addresses

forgot apple id security question answers - reset email is not being sent to email addresses

Hi there,
Why dont you just change your Apple ID (your email)? Make a new Apple ID and do the security questions that you will remember. Also, make sure you write down all the info with your Apple ID for later refrence.
To create a new Apple ID, follow the easy steps below:
Settings > Itunes and App stores > Tap "Apple ID: (YOUR APPLE ID IS HERE!)" > Tap "Sign Out" > Tap "Create New Aple ID"

I`m trying to develop an optimistic concurency based on the Etag Header. This header is being sent OK on every GET request, but NOT being sent on a POST. Why?

I`m trying to implement an optimistic concurrency control over a web application entities.
I`m attaching an Etag HTTP Header to every URI that represents an entity.
On successive GET requests this header is being sent back as If-None-Match (witch is OK)
The PROBLEM is on a POST request, the ETAG is not being sent back (neither If-None-Match, If-Match, etc..).
My question is : Is this the desired behavior? The browser omits this on purpose on a Http POST?

Hi Daniel,
Do you still have this problem ?
(If you found a solution a link to that may help others)

Imessages being sent using email address how do I correct

I recently reactivated my iPhone 6 and now my imessages are being sent via my email address not my phone # how do I correct this?

settings - imessage - send/receive - make sure phone is number is checked and grey out.
if no sign out of imessage and sign back in. or remove your apple id.

Excise Invoice not getting printed directly.

Hi ;
Our client earlier using J1Ip with sp01 for printing excise invoices.
As per new requirement through J1IP only direct printing is required so that there is no need to go SP01.
I have using print immediately setting in VF02. As well as VV31 also maintained.
Still system is genearting spool request & need to go to Sp01 to print the invoice.
Can somebody help me in this regards;
Thanks;
Anita

Hi
Anita
As told by u everthing is corect. Please check the SAP LPD is getting open or not while u firing print out ? Please load lpd files again.
Hope this will help u.

Invoice is getting created instead of Credit Memo in EBP

Hi all,
when we post credit memo in ASN & it comes in EBP sytem is picking transaction in as INV i.e. invoice instead of credit memo.
And also with status ''To be corrected".
Please let me know how can correct it.
Regards,
Neelima

pl see whether you can get any relevant info at
http://help.sap.com/saphelp_srm50/helpdata/en/67/6e9746608221499322c93a03ffaf4e/content.htm
BR
Dinesh

Outgoing emails from one account go into an 'outbox' instead of being sent

Have multiple email accounts in Mail on iPad which were all working fine. One of the AOL accounts began putting every email I try to send into the outbox instead of sending them. No error message - just 'this email has been placed in your outbox.' All settings/servers are identical to the accounts that are working properly. Deleted the offending account and then added it back. No change. Once, and only once, the emails sitting in my outbox just randomly sent. Some were a couple of weeks old. My workaround now is to open the email in the outbox and change the 'from' field to any one of the other 6 accounts - then it sends. This is not a good solution however because I set up these different accounts for different purposes. The offending email account works fine on both my Mac and my iPhone - when I send an email from the same account on those devices, it sends. Suggestions?

Thank you Chris CA - I double-checked - I do have correct username & password in outgoing mail server.
Again, no error message when I try to send - nothing about username or password or server....the only message I get is "placed in your outbox"

Sharing to vimeo impossible. when I try to share to vimeo and begin my sign in, when I type "i" i get "inspector" instead of being able to type the "i" which is part of my online name. HELP!

imovie 11 with Mountain Lion trying to share a video to Vimeo...sign in impossible. Try to type my sign in name and password for Vimeo. When I type and "i" which is part of my user name it brings up "inspector" which is a feature of imovie....tried several times, same result.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download IPhoto Library Manager 4 for OS XC 10.6.8 and iPhoto 8.1.2 and later or iPhoto Library Manager 3 (for OS X 10.5.8 and iPhoto 7.1.5 and earlier) and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu (iPLM 3) or Library ➙ Rebuild Library menu (iPLM 4) option.
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
Happy Holidays

Text Messages are being sent as email only to another vzw user. Not able to send text to a mobile device?

I am on a Galaxy S4. Sending text as usually, recipient gets an email of the text. Is is my settings or theirs? What needs to be changed?

Are you entering their name from your contact list to send the text? Or typing in their phone number? The email may be what's being populated by default when you pull their name from the contact list, if that's how they have replied to you previously, or how you sent your last message to them. Try manually typing in their phone number in the To: field and see if it sends as a text or as an email when you do that.

Group messaging issue with messages being sent to email rather than mobile

Hi,
I have an iPhone 4s running iOS 6.0.1. I tried to send out a large group message today by opening up messages and clicking on the + button (top right corner) and selecting a number of recipients one by one in the list.
What I noticed was that when selecting some contacts, I was prompted for a delivery address while other contacts were automatically selected and I couldn't change the delivery path. Unfortunately the phone was automatically sending the messages to the recipients email rather than their mobile phone (I checked my mobile usage records). I couldn't select the recipient in the list and change the delivery method either... I also noticed that the message would change from an sms to mms message automatically because the iphone was automatically choosing an email address to send to. This is really annoying!!! Does anyone know a work around?
I tried disabling mms messaging in settings-messaging but I would get an error saying:
Cannot Send Message: MMS Messaging needs to be enabled to send to an email address
This is incredibly frustrating. Why doesn't the iphone allow you to select the delivery address for each contact rather than automatically selecting an email address? I thought the iphone would be smart enough to select their mobile number since it is a mobile messaging device...
Any ideas?

Is there a solution to this issue?

SMS being sent as email

I have two 4S' - mine and my wifes. If we both have iMessage turned on, I can send her a message normally. If I turn off iMessage (simulate network issue) - my SMS is sent as an email from my [email protected] I sent a text message to a friend who has an iPhone 4 running 4.3 and it goes through as a normal text.
Is this an Apple iMessage server issue? Any settings I'm missing.

I'm having the same issue. Any one know the cause of this behavior?

Getting error when trying to sent outgoing email

Eveytime I try to send an email forward to anyone I get an error message about password for outgoing mail. I have no clue what to do
To fix this help please

Some of the email providers (never met,but heard about one) do require additional password for outgoing mail.
You would have to contact your Exchange Administrator or email provider to find that password. Pretty sure after you enter it once, phone will remember.

PDF File corrupted when being sent by email by tomcat... what's wrong?

Hi,
I have been a little frustrated trying tomcat to send a pdf file by email after it have been uploaded to the server.
First case:
If i run the same code in windows, it works.
Second case:
If i run the same code manually in java in the tomcat linux server it works.
Third case:
The problem is when the code is running by tomcat in a jsp page.
In every situation the email goes to the sender, but in the last one, the reported size of the pdf file is not the same as the first and second case resulting in a pdf corruption. It cannot be opened.
I am running Tomcat 5.5.17 with jdk 1.5.0.10 in a Redhat Enterprise Linux 4 Server.
This is the code called by a jsp page.
package eor;
import java.util.Date;
import java.util.Properties;
import javax.activation.DataHandler;
import javax.activation.FileDataSource;
import javax.mail.Authenticator;
import javax.mail.Message;
import javax.mail.MessagingException;
import javax.mail.Multipart;
import javax.mail.PasswordAuthentication;
import javax.mail.Session;
import javax.mail.Transport;
import javax.mail.internet.InternetAddress;
import javax.mail.internet.MimeBodyPart;
import javax.mail.internet.MimeMessage;
import javax.mail.internet.MimeMultipart;
public class SendMailUsingAuthentication {
private static final String SMTP_AUTH_USER = "user";
private static final String SMTP_AUTH_PWD = "pass";
public void sendEmail() {
String from = "[email protected]";
String to = "[email protected]";
String subject = "Sendit from linux ";
String bodyText = "This is a important message with attachment";
String filename = "//home//test//HON-SOLMANT28AGO08.pdf";
Properties properties = new Properties();
properties.put("mail.smtp.host", "Testmailhost");
properties.put("mail.smtp.auth", "true");
properties.put("mail.smtp.port", "25");
Authenticator auth = new SMTPAuthenticator();
Session session = Session.getInstance(properties, auth);
session.setDebug(true);
try {
MimeMessage message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.setRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
message.setSentDate(new Date());
// Set the email message text.
MimeBodyPart messagePart = new MimeBodyPart();
messagePart.setText(bodyText);
// Set the email attachment file
MimeBodyPart attachmentPart = new MimeBodyPart();
FileDataSource fileDataSource = new FileDataSource(filename) {
@Override
public String getContentType() {
return "application/octet-stream";
attachmentPart.setDataHandler(new DataHandler(fileDataSource));
attachmentPart.setFileName(filename);
Multipart multipart = new MimeMultipart();
multipart.addBodyPart(messagePart);
multipart.addBodyPart(attachmentPart);
message.setContent(multipart);
Transport.send(message);
} catch (MessagingException e) {
e.printStackTrace();
private class SMTPAuthenticator extends javax.mail.Authenticator {
@Override
public PasswordAuthentication getPasswordAuthentication() {
String username = SMTP_AUTH_USER;
String password = SMTP_AUTH_PWD;
return new PasswordAuthentication(username, password);
}I will appreciate your help to solve this situation.
Regards,

bshannon wrote:
Are you sure you're using the Sun implementation of JavaMail on RedHat? Some versions of
Linux come with the Gnu version of JavaMail included, which might behave differently.
If you turn on session debugging, what does the protocol trace show?
Are you sure you're sending the same file in all cases?
Are you sure the file upload is complete before you send the file?Are you sure you're using the Sun implementation of JavaMail on RedHat?
Yes I am using JavaMail 1.4 from SUN.
If you turn on session debugging, what does the protocol trace show?
Yes. Below you will find the protocol trace.
Are you sure you're sending the same file in all cases?
Yes I am sure.
Are you sure the file upload is complete before you send the file?
Good point. I will check it out!
Protocol Trace output:
Grabando archivo en disco...
DEBUG: setDebug: JavaMail version 1.4.1
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth true
DEBUG SMTP: useEhlo true, useAuth true
DEBUG SMTP: trying to connect to host "168.243.220.232", port 25, isSSL false
220 SMTP IM2 Proxy Server Ready
DEBUG SMTP: connected to host "168.243.220.232", port: 25
EHLO web2.enteoperador.org
250-ESMTP Server Ready
250-SIZE 0
250-DSN
250-AUTH LOGIN
250-AUTH=LOGIN
250-STARTTLS
250 TLS
DEBUG SMTP: Found extension "SIZE", arg "0"
DEBUG SMTP: Found extension "DSN", arg ""
DEBUG SMTP: Found extension "AUTH", arg "LOGIN"
DEBUG SMTP: Found extension "AUTH=LOGIN", arg ""
DEBUG SMTP: Found extension "STARTTLS", arg ""
DEBUG SMTP: Found extension "TLS", arg ""
DEBUG SMTP: Attempt to authenticate
AUTH LOGIN
334 VXNlcm5hbWU6
c3ZhbGxl
334 UGFzc3dvcmQ6
dmFsZXJpYW1pYW1vcg==
235 Authenticated successfully
DEBUG SMTP: use8bit false
MAIL FROM:<[email protected]>
250 +OK Sender OK
RCPT TO:<[email protected]>
250 +OK Recipient OK
DEBUG SMTP: Verified Addresses
DEBUG SMTP:   [email protected]
DATA
354 Start mail input, end with "<CR><LF>.<CR><LF>"
Date: Fri, 26 Sep 2008 17:47:18 -0600 (CST)
From: [email protected]
To: [email protected]
Message-ID: <[email protected]>
Subject: Sendit from linux
MIME-Version: 1.0
Content-Type: multipart/mixed;
        boundary="----=_Part_0_28970806.1222472838992"
------=_Part_0_28970806.1222472838992
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
This is a important message with attachment
------=_Part_0_28970806.1222472838992
Content-Type: application/octet-stream;
        name="//www//tomcat//upload//oper-hon//HON-SOLMANT28AGO08.pdf"
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
        filename="//www//tomcat//upload//oper-hon//HON-SOLMANT28AGO08.pdf"
JVBERi0xLjANCg0KMSAwIG9iag0KPDwgL1R5cGUgL0NhdGFsb2cgL1BhZ2VzIDIgMCBSID4+DQpl
bmRvYmoNCg0KMiAwIG9iag0KPDwgL1R5cGUgL1BhZ2VzIC9LaWRzIFsgMyAwIFIgXSAvQ291bnQg
MSA+Pg0KZW5kb2JqDQoNCjMgMCBvYmoNCjw8IC9UeXBlIC9QYWdlIC9QYXJlbnQgMiAwIFIgL01l
77+9DC/vv73vv71YYO+/vVsMF20t77+977+9Nkg777+9bitg77+9KO+/ve+/ve+/ve+/ve+/vXw1
X++/vW8J77+977+9NQknfu+/vQgw77+9TX1177+9YSwS77+9
------=_Part_0_28970806.1222472838992--
250 +OK message queued for delivery.
QUIT
221 Service closing transmission channel closing connection

Original Picture not being sent in email!

Good Morning all, So here's my question and thanks for your help. I made a duplicate photo (command+d) which is what I do to every picture I want to add effects to so I know which one's I have altered, so I was trying to send my friend the original and the one I added effects to so he could see the difference, and the only one he can see is the one I added effects to. I got on the phone with Apple care, and each picture has a different name ending in .jpg. I have tried several times to send the original, even by itself, and on my friends end, it shows an attachment, but nothing is there. Does anyone know why I can no longer send the original? I have also tried repairing my permission's but that didn't work. Thanks again for your help!

Try exporting the original (File -> Export) and see it that works. If it does we’ll know the library is okay and can look at the mailing process. IF it doesn’t we’ll need to look at the Library.
Also, how do you go about emailing? What app do you use?
Regards
TD

Invoice is getting printed instead of being sent in email

Similar Messages

Maybe you are looking for