Invoice List Header text disabled (VF22) and note 357732 missing

1. Can any body please let me know the Invoice List text Determination? Presently, My Invoice list screen is showing the Header text tab is disable, if possible please let me know how to do enable so that I can enter into the Text.
2.  I checked SAP Note  # 943390. But this note has link to note 357732 which does not exist. 
Please let me know if any work around.
Thanks in advance.

Hi Laxmipathi sir,
as you said i went in the bussiness area account assignment and checked it and foound that the Sales area, distributin channel and division are assiogned to rule called 003 -Buss Area Det.from sales org/dist.channel item div.
but there are other two.which were not assigned.
001-buss area det.from plant/dividion(T134G)
002-buss area det.from Sales area (TVTA).
so do you think this is the reason it is not picking it up in the invoice list,
i have discussed with one of the SD person here he said even though you don't assign them it shoudn't bother because the buss area is getting picked in invoice
so could you please tell me what should i ask that person or what i have to tell them about this.
thanks
Jay

Similar Messages

  • Invoice List  Header text

    Hi,
    Can any body please let me know the Invoice List text Determination? Presently, My Invoice list screen is showing the Header text tab is disable, if possible please let me know how to do enable so that I can enter into the Text.
    Thanks & Regards,
    Sachin

    Please check whether the Text Procedure attached to Invoice List document type has any Text IDs in them (Transaction Code: VOTXN).

  • Payment terms, Payment method, etc. blank in the Invoice Lists header.

    Hello,
    I am creating Invoice Lists - LR with F2 - Invoices but surprisingly the payment terms, payment method, VAT registeration no., etc. are not populated into the Invoice Lists header. I think it should have been populated from the 'Payer's' customer master.
    I am using 'Copycontrol' routine no. 16; if it is relevant in any way.
    Can someone help me with this, cause I need to use these field's data into the printout.
    Thanks,
    Nandish.

    Hi Sreedhar,
    BBP_UPLOAD_PAYMENT_TERMS program does not work well.I tried using this and this ask for RFC destination(LOGSYS) while replicating the payment terms.
    and when you try to see these payment terms in customzing it does not give you correct result and so result in SRM HTML screens.
    What I did for this.
    There are two tables involved in this
    BBP_PAYTERM
    BBP_PAYTERM_TEXT .
    If you see entries in table BBP_PAYTERM ,it will have data with ERPCLNTXXX system while same kind of data will not be there for SRMCLNTXXX.
    You have to copy ERPCNLTXXX data into SRMCLNTXXX data.
    To do that copy all data with SRMCLNTXXX ,go to table Entry in Menu and delete all entries.
    Then copy all ERPCLNTXXX data and go to Table Entry ,Create with template.
    You can do this is SE11 or SE16 transactions.Do similarly with BBP_PAYTERM_TEXT.Please check entries before doing it for BBP_PAYTERM_TEXT table as this table may have similar entries for SRMCLNTXXX and then you will not require to copy all.
    Actaully program recognise only Payment terms in SRM.
    Once you have done this..You can see in customzing all correct payment terms replicated.
    SPRO->SRM server->Cross application basic setting->Create payment conditions.
    I hope this helps.
    regards,nishant
    please reward if this helps

  • Header Text from Sales Order Not Copied to Header Text Invoice.

    Hello All....Does anybody have an idea why this is happening ??
    My Sales Order have the Header Cl.Text Z001 "Header Text", I write text in two languaje "EN" and "ES".
    Z001 Header Text (Sales Order)
             EN -->>   Hello
             ES -->>   Hola
    When I create the Invoice with reference this Sales Order, this only copy the Spanish Text but not the English Text.
    Z001 Header Text (Invoice)
            ES -->> Hola
    Thanks in advanced.
    JEOS.

    Hello Jorge
    Ensure that you checked the box 'All Languages'  in the related access sequence.
    T code VOTXN.

  • Invoice List-Header & line items

    Dear Expert,
    If I want to create an invoice list which both AR invoice header & line items, then how can I create it as the line items has the same header?
    Could you advise this?
    Thank you.
    Raymond

    Hi Raymond,
    You can use the following query,
    SELECT T0.CardCode, T0.CardName, T1.ItemCode, T1.Dscription, T1.Quantity FROM OINV T0  INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry
    If you are using QPLD for this then you can sort and group header items so that not to repeat again n again with row items.
    Regards,
    /Siddiq

  • Invoice list based on sold to party not

    Hi all,
    As per my client requirement, Sold to party is one only but there will be different bill to party & Payer.
    Only one main sold to party is paying all bills generated on behalf of different payer. The reason to make payer is, client wants accountability on payer wise. So sold to party is one & different payer.
    Now Ii require to raise a invoice list based on sold to party wise not payer or bill to party wise.
    Invoice list getting spillted because of different partner.
    How to do that.
    Please suggest me as soon as possible.
    Thanks
    Shobhit

    Hi Shobhit
    To meet your requirement  you need to go with a enhancement then your requirement will be fulfilled. So you need to discuss with your Technical team also regarding this issue
    Thanks and Regards
    Srinath

  • Dynamic Actions & Cascading List of Values (Exception thrown and not caught

    I am having a really strange issue within my Apex 4.0 environment where I am trying to build dynamic actions and cascading list of values.
    I am trying to develop new functionality in an existing application, (original application developed using HTMLdb 1.6 and gradually updated to Apex 4.0.1), to add a dynamic action that sets a value of another field, using SQL. The dynamic action is failing with 'Exception thrown and not caught - jquery-1.4.2.min.js Line: 28 Char: 162'. However, when I create a new application within the same workspace and develop the same functionality is works without a problem.
    I have ensured the templates for each page/region are an exact copy of each other.
    <b>When I run the application in Firebug I get the following information:</b>
    Date     Fri, 31 Dec 2010 14:20:03 GMT
    Server     Oracle-Application-Server-11g
    X-DB-Content-length     87
    Set-Cookie     HTMLDB_IDLE_SESSION=31-DEC-2010 23:20:03;path=/
    Content-Length     87
    Keep-Alive     timeout=5, max=99
    Connection     Keep-Alive
    Content-Type     text/html; charset=UTF-8
    Content-Language     en
    <b>For the application that is working I get slightly different response headers.</b>
    Date     Fri, 31 Dec 2010 14:20:37 GMT
    Server     Oracle-Application-Server-11g
    Cache-Control     no-cache
    Pragma     no-cache
    X-DB-Content-length     14
    Content-Length     14
    Keep-Alive     timeout=5, max=94
    Connection     Keep-Alive
    Content-Type     application/json
    Content-Language     en
    <b>Notice the Content-Type for the version that doesn't work is using "text/html", while the working version uses "application/json"
    Firebug also provides the following error:</b>
    uncaught exception: Invalid JSON: Content-type: application/json Cache-Control: no-cache Pragma: no-cache {"value":"1"}
    <b>Does anyone have any idea what is going on??
    Thanks.
    Jon</b>

    Patrick,
    Thanks my session verify function was causing the problem and I have removed it temporarily from my authentication scheme.
    I am using the "check_timeout" function that was developed a number of years ago as part of a "How To" section in the old HTMLdb days. I knew there was an issue with this routine as the newer versions of the browsers handle cookies differently and I was going to redevelop it at some point. Do you know which part of the function causes the issue?
    Many Thanks,
    Jon
    FUNCTION check_timeout
    RETURN BOOLEAN
    AS
    l_session_expire VARCHAR2(256) := NULL;
    l_cookie_exists BOOLEAN := TRUE;
    BEGIN
    IF htmldb_custom_auth.get_user IS NULL THEN
    RETURN TRUE;
    END IF;
    BEGIN
    l_session_expire := owa_cookie.get('HTMLDB_IDLE_SESSION').vals(1);
    EXCEPTION WHEN NO_DATA_FOUND THEN
    l_cookie_exists := FALSE; -- no cookie set, assume first page visit after login
    END;
    IF l_cookie_exists
    AND TO_DATE(l_session_expire,'DD-MON-YYYY HH24:MI:SS') < SYSDATE
    THEN
    wwv_flow.g_unrecoverable_error := TRUE;
    owa_util.redirect_url('f?p='||'500:101'); -- Note hard-coded login application and page ID 500:101
    RETURN FALSE;
    ELSIF NOT g_cookie_already_sent THEN
    owa_util.mime_header('text/html', FALSE);
    owa_cookie.send ( NAME => 'HTMLDB_IDLE_SESSION',
    VALUE => TO_CHAR(SYSDATE+(c_max_idle_minutes/1440),'DD-MON-YYYY HH24:MI:SS'),
    expires => NULL,
    path => '/',
    domain => NULL );
    owa_util.http_header_close;
    g_cookie_already_sent := TRUE;
    END IF;
    RETURN TRUE;
    END check_timeout;

  • Paid to allow edit text in PDF, and not working

    I wanted to 'edit' text in PDF and followed the instructions, it told be to subscribe and pay to do this.  I did subscribe and pay, but the functionality is still not working, keeps directing me to subscribe and pay.

    Hi rrobati,
    I checked your account,your Export PDF subscription is not confirmed yet at our end.
    Once it gets confirmed you will be able to use it hassle free.
    Regards,
    Florence

  • Read header text from vf01 and print in script main window

    Hi Gurus,
               I need to read text from vf01 header note 1, there user type max 10 lines i want to read that 10 lines and print in sap script main window after line item printed. i used read text but  one line only  fetched. i declare variable like  data : NEXRSP LIKE TLINE-TDLINE and read_text function module. pls provide solution for this.
    Regards
    G.Vendhan

    HI GURUS,
    Thank u for reply i declare like
        ID = '0002'.
        PERFORM READTEXT USING EN NAME OBJECT ID TEXT_OUTPUT.
        NEXRSP = TEXT_OUTPUT . CLEAR TEXT_OUTPUT.
    FORM READTEXT  USING    P_EN
                            P_NAME
                            P_OBJECT
                            P_ID
                            P_TEXT_OUTPUT.
      CALL FUNCTION 'READ_TEXT'
        EXPORTING
          CLIENT                  = SY-MANDT
          ID                      = P_ID
          LANGUAGE                = P_EN
          NAME                    = P_NAME
          OBJECT                  = P_OBJECT
        TABLES
          LINES                   = LINES
        EXCEPTIONS
          ID                      = 1
          LANGUAGE                = 2
          NAME                    = 3
          NOT_FOUND               = 4
          OBJECT                  = 5
          REFERENCE_CHECK         = 6
          WRONG_ACCESS_TO_ARCHIVE = 7
          OTHERS                  = 8.
       LOOP AT LINES.
        P_TEXT_OUTPUT =  LINES-TDLINE.
        EXIT.
       ENDLOOP.
      FREE LINES. CLEAR LINES.
      ENDFORM.                    " READTEXT

  • Repeating table header text is bold and won't go

    I have an InfoPath 2007 form that I have published to a SharePoint 2010 site with Forms Services.
    When I open the form in the browser, the column titles in each repeating table appear in bold text. No matter what I do, I cannot make this go away. I have tried the obvious things, such as pressing the CTRL+B or CTRL+SPACE keys. I can apply or
    remove underline or italics but not the bold.
    We are still in changeover period so I can publish this to a MOSS site (no Forms Services) and the table headers are not bold when they open in the InfoPath client.
    Does anyone have any ideas?
    Thanks,

    Hi AdeleR,
    Thanks for your post.
    As what you have said, I think it’s may be a compatibility problem between InfoPath 2007 and SharePoint 2010.
    In order to clarify the reason, I suggest you to do some things as follows:
    1.      
    Compare the source code of the InfoPath page between SharePoint 2007 and SharePoint 2010 using IE developer tool.
    a.      
    Publish the InfoPath form to SharePoint 2007 and SharePoint 2010;
    b.     
    View the source code using IE developer tool;
    c.      
    Compare them.
    2.      
    Are you using IE to open the InfoPath form? Try to browse it using Firefox and give the results.
    3.      
    Re-create a new InfoPath Form and publish again and share the result.
    In addition, there are some new features in InfoPath 2010, have you considered about upgrading to InfoPath 2010.
    http://blogs.msdn.com/b/infopath/archive/2009/07/15/what-s-new-in-infopath-2010.aspx
    I have tried a couple of these points and here are the results:
    Compare the source code - I haven't done this because the 2010 site is using Forms Services and the MOSS one isn't (i.e. only one form opens in the browser and the other opens in the InfoPath client).
    I'm opening the browser-based form in IE8 and I have also tried opening it in Firefox 3.6.3. Both programs show the repeating table headers with bold text.
    I customised the sample Travel Request form and added a repeating table to it. When I published it to both the SP2010 and MOSS sites, the 2010 form that opened in the browser had bold headings; the MOSS/InfoPath client form didn't.
    I also created a blank form, added a table with title, a section and a repeating table. The only formatting I changed was to unbold the repeating table's column headers. Once I published the form, I got the same result as above.
    The form doesn't have the bold text when you preview it in InfoPath. It somehow gets it when you publish it to the SP2010 site. I'm trying to get InfoPath 2010 (for its cascading drop-down lists) so will see if that makes any difference.

  • How to return the month view format on IPhone to show text of events and not dots?

    The month view in my IPhone ICal is now filled with dots to let me know I have an event as opposed to the former view where I could see text at a glance and know what I had to do on certain days.  The month view of days with dots is now worthless to me unless i can change it back to see text.  Also, you have to scroll through to see all the hours in a day.  Is this really necessary?  Who has time to enter in so much activity on their daily calendar that is reqires scrolling through the hours?  Can I make the entire day appear on one screen if I'm in day view?
    Thanks for your help.

    You can see what is similar to the List view by tapping on the magnifying glass. The former Month view with a couple of lines ot text under it no longer exists.
    Feedback to Apple can be made at www.apple.com/feedback and click on the appropriate link.

  • Adding caller with name and number from call list to the contact list only inserts the number and not the name

    I recently bought a BlackBerry Z10 and moved my cell service to Rogers to take advantage of the name display service offered by Rogers (Fido also offers this service).
    Due to the number of calls that I receive from first time clients, I wanted the name display service to help me know who was calling. Evidently it is impossible to add clients to my contact list before they call me so I'm constantly seeing numbers that have no name to help me decide if I want to answer the call.
    When I try to add a caller from my call list to my contact list, only the number gets inserted in the new contact. The name needs to be entered manually.
    I understand and realize that not all call display formats are the same and that it's virtually impossible to parse the first and last names from the name portion of the caller id.
    However, I would like to see BlackBerry add the functionality to insert the name portion of the call entry from the caller list to a "Nickname" entry in the contact list just like it adds the number to a "Home", "Mobile", or "Work" entry in the contact list.
    If a user doesn't have a name display service, there would be no change to how their contacts are added because there is no name variable to copy over.
    Can someone from BlackBerry please let me know if this feature can be added to BB10 and when it can be added? For me it's an obvious feature that should just work.
    I am really enjoying my Z10 but I'm feeling let down that something so logical and helpful is not supported out of the box.
    Regards,
    Marc

    Hey ViciousFerret,
    It appears that you are not aware of the fact that both Rogers and Fido offer name AND number display service (although the name display feature is an add-on service) and have been offering it for many years (since 2006). Here is a link to the name display service description of each provider...
    http://www.fido.ca/web/content/manageyourcalls/calldisplay&lang=en
    http://www.rogers.com/business/on/en/smallbusiness/products/wireless/addons/valuepacks/
    As you can see from the link below, Rogers and Fido have been offering this service since 2006.
    http://www.businesswire.com/news/home/20060914005951/en/Teams-HP-Rogers-Wireless-Fido-Succeed-North
    My BlackBerry Z10 shows both the name and number when someone calls (and the caller is not in my contact list).
    All I would like is for the Z10 (and Q10) to support the addition of the name and number from the caller list to my contact list without me having to type the name. As I mentioned in my original post, to avoid the OS having to parse the first name and last name from the name portion of the caller list entry the name could simply be added to the contact list as a "Nickname". If your provider only has number display, nothing would have to be copied from the name variable in the caller list to the contact list.
    I find it difficult to believe that BlackBerry would not be aware of this name display service since it's been around since 2006 with both Rogers and Fido.
    I hope I have clarified the reasons why I would like to have this feature added to BB10 and how it's surprising that this simple feature is not already a part of the BB10 OS.
    Either way, I don't think this is a difficult feature for the BlackBerry team to add. They're just copying a 2nd variable from the caller list to the contact list.
    I'm surprised that Rogers hasn't asked BlackBerry to add this feature to their phones. I think it would be a popular feature for those who receive a high number of calls from first time callers.
    How can I get this feature request to BlackBerry for their consideration?
    Cheers,
    Marc

  • How do I unlock my ipod touch that shows a red disabled screen, and not been able to connect to the original computer it was sync to?

    How do I unlock my ipod touch showing a red ipod disabled connect to itunes, with the disadvantage of not having the original computer that my ipod was sync to?

    If you have a passcode to the screen lock that you've forgotten, you'll need to restore the iPod. Since you don't have the original computer, this will erase all the content on the iPod. For information and instructions, see:
    http://support.apple.com/kb/ht1212
    If that will not work, you'll need to put the iPod into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    Regards.

  • SAP ADOBE PART list -Can we disable parts and make it a single PDF

    Hi,
    SAP came up with this New ADOBE spool technology .
    I have used and generated this PDF spool using FP_JOB_OPEN  but PDF is shown as PART LIST by default.
    Is there any way we can disable this?
    Because my user wants to see all parts in a single PDF (Single Part)
    I have looked in sfpoutputparams but did'nt find anyhting whihc
    Any help is appreciated.

    Just wanted to close this thread with the resolution remarks
    1) You cannot get rid of the Incoterm on the Auctions object without writing custom query
    2) If you want to default some inco-term as none, create that, remove the rest and have that defaulted using Auction Templates
    Site Admin/ Solution Management for SAP Sourcing: Worth taking this into the V11 Survey feedback for SAP
    Cheers

  • All web page display with lines, text are stretched and not legible

    all pages are displayed with stretched text, and pictures are also not loaded properly when scroll up and down.
    == This happened ==
    Every time Firefox opened
    == Last update to 3.6.3

    I am having similar problems. Ebay was not displaying correctly until I closed down the browser and restarted. Other websites had the same problem. In Facebook, many links are not working.

Maybe you are looking for

  • Worksheets are not able to see.

    Hi, Installed the apps in (example AB instance(Server) Seperate System).In User AB(Client System) installed the BI Admin and BI Desktop 10. Created the worksheets from the client system and saved to the database (i.e server system example instancenam

  • TSV_TNEW_PAGE_ALLOC_FAILED in Bw server,while execut t.code RSRT(netwear 7.3)

    Dear experts, when i execute T.code:RSRT, i get error like a no more more available in extend memory.In T.code: Db02 shows () 1) An exception with the type CX_SY_STRUCT_COMP_NAMEoccurred, but was neither handled locally, nor declared in a RAISING cla

  • What is Message Type & IDOC Type?

    He Experts!, What is Message Type & IDOC Type? What is the difference between them? Thanks in advance. Sekhar

  • Menu button has stopped responding

    Help! My 1st generation nano - my workout buddy - is not responding to my pressing the menu button. It seems to be completely dead and non-responsive. I haven't dropped it... but it may have become slightly damp from sweat. Now it is stuck on a calen

  • Authentication Domain for PeopleTools 8.48

    I know there is very little reason to change the authentication domain name; however, there are situations where the issue may arise when this needs to be done. In 8.48, how do you change this without having to totally rebuild the weblogic 8.1 webser