Invoice List print out multiple output devices

Gurus
I have a requirement where in I need the Invoice list to generate output to 2 different devices.....
Here is my dillema, Invoice list program looks at the output device that is set up in the user defaults in the user area, SU3 transaction, Since only one output device can be used in that field I can generate Invoice list output to only one printer unless done manually that is not possible as the number of invoice list is huge.
I am using ECC 5.0 , Does anybody have a solution for this???
Thanks
In advance

The printer name can be defaulted from the output condition record, which I believe trumps the printer in the user's default.
You could have two output condition types Z001 and Z002, both automatically proposed and each pointing to a different printer.

Similar Messages

  • HT3529 Is there a free option to printing out multiple text messages from one person?

    is there a free option to printing out multiple text messages from on person?

    Printing from the iPhone either requires an AirPrint compatible printer, or an app from the App Store. You would have to search to see if they are free or cost. Also, the printing of text messages would either require you to make a screen shot of the message and to print that as a photo, or you would need a 3rd party software on the computer to copy the entire message to the computer and print from there. There is no native print capability for entire message threads.

  • After EHP6 Upgarde Picking list print out is resulting format & overlapping issues

    Hi All,
    We have recently upgraded our system from ECC 6.0 to EHP6 .Now when user trying to print a Picking list document then Print out is overlapping with content .
    But when we check the spool the Print Priview looks good but when trying to print the content is overlapping & observed the font size is chaned i.e. the content is displayed in Bold format .
    But for those spools which were created before upgarde & when we give a print then Print out is fine. So some thing happend after upgrade that causing us the Print out problem .
    we are using device type HPLJ4  & try to print Picking list output and it is causing problem.
    Kindly provide your suggestions.
    Thanks and regards,
    Dilip

    Hello Peng Wen,
    Thanks for your reply and yes the issue got resolved . Actually we are using a custom device type ZHPLJ4 which is a copy of HPLJ4 . But as part of Upgrade ZHPLJ4  HELVE with scalablity is no longer supported. So we have removed the entry from SE73 as it even doesnt exist in HPLJ4 . Now it is working as expected.
    Thanks a lot for your replay.
    Thanks and regards,
    Dilip

  • Out put logistic invoice verification (print out need in chinese language)

    Hi All
    In MR90 out put logistic invoice verification I am getting output (Printout) in English the requirement is chinese language has to add in output.I know however I need to take help of abaper.I want to know what r the configuration steps to fill this requirement.can any one help me regarding this. Points will be added..
    Thanks
    Srini

    Hello
    Check this link and coordinate with ABAper.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/27d457f17b11d287d0080009b98822/frameset.htm
    Reg
    *assign points if useful

  • Print out multiple copies for next page in sapscript

    Hi All,
              For  check printing the client wants the next page with item data to be printed out twice, while the first page along with the check will be printed out on a pre-printed paper. Can anyone advice me on this.

    hi,
    IF &PAGE& EQ 1
      "do write what all you need to print in First page
    ELSE
      "write what all necessary you want to print from second page onwards..By this first page will not print in Second Page
    ENDIF.
    IF &NEXTPAGE& EQ 0
      "This Means it is last Page write footer or any comments in Last Page
    ENDIF.
    Prabhudas

  • Using Multiple Output Devices

    Hello,
    I just bought a simple multi-input device. It's just a box with several inputs connected to my iMac via USB. The input works flawlessly - I can assign each input to a channel in Logic.
    I'm having trouble with the Output. When the box is connected to my iMac and is selected under 'Device' in Logic's preferences, all the output is routed via the box too - but I want to use my internal speakers. The only Outputs I have available on the channel mixers are 'Output 1-2' which appears to be my box.
    The output device selected in Sound Preferences and Audio Midi Setup is my built-in output.
    Is there any way to use my built-in speakers when the box is connected?

    Garrys wrote:
    Hi John,
    Anyway, the link you posted seems to herald the answer! I'll give it a go shortly. I'm still surprised that I don't just see four output channels on each track (two for each device) and choose them accordingly.
    You are a few clicks away!
    Yes, I agree that Logic should catch up to it's little brother, GarageBand, in this respect, but maybe in some future release.

  • A/R Downpayment Invoice + Payment Print Out Issue

    Dear Experts,
    I have been searching around the forum but have not found an answer to my question.
    I have a user whose license is a combination of the limited CRM and limited Logistics license.
    This user is able to create an A/R downpayment invoice and enter the payment means. He later adds the document into the system.
    Here is the problem:-
    1.  When he retrieves back the downpayment invoice to print, he selects to print "A/R Invoice + Payment". When he does that, a message prompts that he is not allowed to perform the action.
    I am half suspecting that this may be a limitation imposed by the license, considering that he has no access to the Banking module. I do find it weird that the system allows for payment means and downpayment invoices but does not allow for the user to print the payment document.
    Appreciate if someone could shed some light as to what is going on here. Thank you.
    Regards,
    Alvin Chong

    Dear Alvin Chong,
    This is the limitation for user's license type. In fact, those limited license is not allowed to access all final financial document. Not only Banking module.
    Down payment invoice is an exception because it has to be finalized by formal invoice.
    Thanks,
    Gordon

  • Re: the odd price list print-out

    I've used FOP from Jakarta and had pretty good success with it. It takes a little bit of time to learn how to write your documents, but it does a decent job with the formatting, etc. Check it out at
    http://xml.apache.org/fop/
    Also, there is a good reference site for fo at http://zvon.org/xxl/xslfoReference/Output/index.html

    Hi Pragya,
    Please go through this piece of document from SAP Library
    If you use a column with greater than 255 as the LINE-SIZE in the REPORT or NEW-PAGE statement, the following notes apply:
    Type definitions: The type group SLIST defines the valid maximum value for the list width (SLIST_MAX_LINESIZE), and contains a type for list lines with maximum type (SLIST_MAX_LISTLINE).
    Printing: You cannot print the list using standard printing functions. To print it, you must create a special print routine that arranges the data in shorter lines (for example, using the ... PRINT ON addition in the NEW-PAGE) statement.
    Accessing the entire contents of a line:: To read or modify the entire contents of a wide line, you can use the ... LINE VALUE addition in the READ LINE or MODIFY LINE statements. This is an alternative to using SY-LISEL that is independent of the attributes of the system field (since the length of SY-LISEL is 255 characters).
    Hroizontal lines: With extra-wide lists, the "ULINE." statement corresponds to "WRITE / SY-ULINE.". So, for example, "ULINE AT 5(300)." corresponds to "WRITE AT 5(300) SY-ULINE.".
    Output length:: You can use the length specification in WRITE (or ULINE) to extend the output length of an extra-wide list up to the value of LINE-SIZE. If you want to output a whole field that is longer than 255 characters, you must use this, even if the field itself is defined as longer than 255 characters.
    Example
    NEW-PAGE LINE-SIZE 1000.
    DATA: F1(500) VALUE 'F1'.
    WRITE: /      F1 COLOR COL_NORMAL.  " Output with length 255
    WRITE: /(500) F1 COLOR COL_NORMAL.  " Output with length 500

  • Invoice verification print out

    Helo SAP Experts,
    How to take Invoice verification Prinout in mm?
    thanks
    babu

    Hello,
    Please note that as Invoice Verification is posting of incoming document, SAP does not provide for direct print settings. You can only print Invoice Plans, EDI and any Invoice complaints. You can however try with INS (Invoice Plan) and REKL. Maintain the conditions for wither of these and it will work.
    Go to NACE. You can configure all the documents in single Tcode.
    for more clarification follow this link
    http://help.sap.com/saphelp_45b/helpdata/en/a8/b99864452b11d189430000e829fbbd/content.htm

  • Output Device prints 3 copies of each print out

    Hi Frnds,
    We are facing a problem with the output device.
    When we try to print anything from SAP to an out put device, it gives us 3 copies of same printout.
    We tried with smartforms, sap scripts and even a normal print request from the anywhere in SAP. For the particular output device it gives 3 printouts.
    That output device is configured to a particular printer here in the user location.
    We have also tried couple of other things,
    Made that particulrt printer as the default one in our operating system (Windows) and printed using LOCL output device. It printed only one copy.
    Made other printer as the default in Windows and then print using LOCL output device, now again it printed only one copy, to another printer.
    Since it prints 3 copies of the same thing from anywhere in SAP with this op device, We think that there is no problem in Print programs or in Output condition configurations.
    The spool that gets generated out of this request says "No. of copies" 1.
    Not really sure where its going wrong. We think the problem is somewhere in Basis settings.
    If any one has faced this kind of issue can u please let me know how we can rectify this?
    Regards,
    Karthick C

    Hello,
    Are you using Access Method G for the output?
    If so you can check if the following setting was set:
    set use_copies = N (where N = number of copies) in
    HKEY_CURRENT_USER\Software\SAP\SAPlpd\SAPLPD
    Check the SAP note: 1149136 also.
    Regards,
    David

  • Reg : Billing Output Determination( Invoice and Invoice List)

    Hi SAP Gurus
    I have typical requirment for billing output determination.V3.
    Is it possible to create a access sequence = Order type/Plant/Sales Org/Dest ctry for invoice printing.
    can any one help on this requirment.
    second one:
    Is it possible to create a access sequence Billing type/Plant/Sales Org/Dest ctry for invoice list.
    currently i am using Billing type / Sale Org.
    Is possible to maintain access sequence =Billing type/Plant/Sales Org/Dest ctry for invoice list printing.

    HI,
    you can create access sequence with that combination Sales and Distribution --> Basic Functions --> Output Determination --> Output Determination Using the Condition Technique --> Maintain Output Determination for Billing Documents --> Maintain Condition Tables --> Field catalog: Messages for billing documents Go to new entries add the fields you want yo create access sequence and create condition table with your combination
    VBELN        Sales Document
    WERKS          Plant
    VKORG       Sales Org
    LAND1         Destination contry
    FKART         Billing type
    Thanks
    seshu

  • Excise invoice print out

    Hi All,
    We need to take Excise Invoice (J1IV) print out.  we are using ECC 6.O version, what is the Tcode for taking the excise invoice print out.
    Thanks and Regards
    Chandru

    Hi All,
    Thanks for your updates,
    I have tested with Tcode J1IP to take print out of Excise invoice with out put type J1I0 and flagged inculde printed excise invoice.
    After clicking print invoice (F8), i'm unable to take the print out. No pages displayed.
    Please help me to resolve the problem.
    Thanks and Regards
    Chandru

  • Attach specific printer to output device

    I have created an output device in SPAD tcode .Its name is  YSEA. Now i want to attach a specific printer to this output device. Like whenever  i use this output device and give a print command, the print should come on this specific printer only. Now how do i give this specific printer so that it fulfills this requirement.

    You add entries in table TNAD7.
    Go SM30 and V_TNAD7--Maintain.
    In program you need to select as follows
    selct single ldest into ...........

  • How to generate PDF copy of invoice list

    Hi All,
    I need a favor from you in helping to generate a PDF copy to invoice list .
    I observed that  spool is not generated for this print output of invoice list but output successfully triggered.
    we have z report (zretrieval ) to generated the PDF  but it's not allowed to generate PDF.
    I tried alternative method by saving the print preview but I can able to save only that particular page.
    our business looking for all invoice list pages in single pdf  so please guide me to proceed further.
    Regards
    Srinivasa Reddy

    I presume your issue is output triggered but PDF file is not generating if the invoice list goes for multiple pages.  If this is correct, then you need to talk to your ABAPer as they only, have to check the  smartform being used for invoice list.
    G. Lakshmipathi

  • Urgent :- Wrong print out in a different language.

    Hi,
    In my invoice for a particular output type, the default language is english, but the invoice print comes in german. if I change the  default language to Danish in Header output in invoice, the print out comes in english. there is an anomaly.
    how to correct this...??
    regards
    sachin

    Hi Sachin,
            It may be Bug related issue in your Script or Smart Form so please approach with ABAPer he will Debug the programe and fix the issue.
    Regards,
    Murali.

Maybe you are looking for