Invoice list split.
Hello Experts,
There are three invoice lists split out of one invoice list. the payer,billingdate are ok. and the user cannot see the split analysis function in his screen in vf22->environment. what next?
Regards,
N.Raja Sekhar.
hello kishore,
Thanks for the reply. I got the note. the root cause for the issue is identified. what I did was,
se16-> there are three invoice lists as I said. I entered the invoice list numbers in the vbrk and I found the combination criteria is differing which is bill to party-when compared from one list to another.
I am awarding points to you for the reply.thanks again.
Regards,
Raj
Similar Messages
-
Invoice List Split - pricing procedure
Hi,
Please help.
We do not want to maintain the factoring discount for Invoice list.
We are combining the invoices , Debit memos, inv cancellations in the invoice list type LR. But we have different pricing procedure for invoices and debit memos. As a result the invoice list splits because of different pricing procedures. To avid split based on the pricing procedure, created a routine (data in VBRK/VBRP) and reset the pricing procedure field(VBRk-KALSM).
So the LR invoice will have pricing procedure as blanks. Please advise if this will have any other implications and also please guide the correct way of doing it.
Thank You.Hi
Well split can be avoided by user exit which exist at transaction VOFM look into this and get billing exits to avoid the split. There may be some condition at billing comment it as you dont need to split at billing. PLs do this appropriately as else you may stop the process. Anymore pls shoot me with the code you have done.
so it can be well avoided with user exit.
Cheers
AnthonyM -
hi all,
we have the following problem:
i need a invoice list every day for one regulator. the debtors that are under this regulator have different payment terms so when i try to create the invoice list for this regulator, that invoices are splitted to different invoice lists ... how can is prevent this?
TIA!
christianHi,
Use transaction code VTFL. (Copy control from delivery document to billing document).
Select the document types, then item category.
In the item category settings, check the routine assigned to the field Data VBRK/VBRP. Here depending upon your requirement, you can develop your own routine (using transaction code VOFM) and assign in this field.
Regards, -
Invoice List Should Split only on Payer or Bill to Party
Salute Masters!!
Invoice list should split only on payer or bill to party function at VF21.
Pleases provide the solution.
Regards,
Srivastav
<contact details removed>
Message was edited by: Jyoti PrakashYou can control this by proper routine for copying control in VTFF for Header Source: Billing Doc & Target: Invoice List doc type.
To further reference on various invoice list split criteria, refer SAP Note 317935 - Invoice Split Criteria for Invoice Lists
Now if you want know as per your current configuration, how Invoice List Split in happening. Then follow following steps:
1.
Try using TCode VF24.
2.
Provide desire parameters & execute.
3.
Select the desired Billing Document in Invoice Due List. To do this Press Ctrl Key from keyboard to select multiple lines.
4.
Then click on simulation button(Shift + F7).
5.
Invoice List Simulate: Invoice List Overview Screen
6.
Select all lines.
7.
There first go for Logs, by pressing Log button.
8.
If there is No Log. Then click on Split Analysis button to get split analysis.
9.
Work on analysis result to make it possible for combining invoice for Invoice list.
10.
If your enhanced routine is can take care of your desire result for Invoice List. Then place that routine in VTFF for Header Source: Billing Doc & Target: Invoice List doc type.
11.
Repeat the step from 1. to 3. Then click on Collective Billing doc Button to create an invoice list with desired billing doc.
Regards
JP -
Invoice List Consolidation with different billing date
Hi!
Want to consolidation different billing date billings into 1 invoice list!
but system will split it,
How can I do??
ThanksHi,
Please check note 317935 Invoice Split Criteria for Invoice Lists
Different Billing Dates for the invoice list from the original invoices will automatically cause invoices to split into multiple invoice lists. This is standard functionality. The primary way to avoid this is to enter a date as a default billing date in transaction VF21 or to modify the report from transaction VF24.
If you do not enter a default billing date and the dates from the individual invoices differ, than the invoice lists will be split into as
many invoice lists as there are different dates.
Regards,
Alex -
Invoice Lists, can you create a single a/c for multo billing docs
We are looking at using the invoice list functionlity to provide a single bill for a payer per month.
This will cover multi ship tos, billing document types, PO numbers etc.
Is there a way to have a single accounting document that will be able to capture the information from multi billing documents and types?I don't think so it is possible because the moment you will be having different billing types, your invoice will split, they can not be clubbed into a single invoice(Number Range are defined on your Document Type).
Reward points if it helps
Regards
N -
Create a Invoice List by Bill-to only????
Hi all-
I am trying to create an invoice list per Bill-to rather than at the Payer level (which is where the factory calendar is assigned). Has anyone had any success creating an Invoice List at the Bill-to level ONLY?
I've researched numerous OSS notes, but nothing seems to be what I'm looking for.
Thanks in advance.
BrianI appreciate the quick response.
I apologize for not providing enough details in my previous post. In our customer structure, we have the Bill-to under the Payer. Anyway, we are trying to create invoice lists per Payer/Bill-to combination (OSS 627023 accomplishes the split, but will always split every Payer/Bill-to combination). But we only want certain Bill-to's to receive an Invoice List.
For example, Payer # 20000 has Bill-to 20001 and Bill-to 20002. We are trying to create an Invoice List for the combination (Payer 20000/Bill-to 20002), but not the combination (Payer 20000/Bill-to 20001).
Any help is much appreciated.
Thanks,
Brian -
I have created 5 Ordes all for the same customer but with 2 of the order having a different Division on the sales area
Can someone please tell me when invoice lists are created from VF24, would this group the billing doc into 1 invoice list or would this split them into different invoice list since the division is different even tho the customer is the same .
Can someone help.
regards
adythank you for your response.
please see below the split analysis. Hope you can help.
Split analy.
Split due to different header data
Fld Name
0090075253
0090075252
Billing date for billing index
20091202
20091201
Price list type
Z1
Incoterms (Part 2)
costs and freight
COSTS AND FREIGHTS
Combination criteria in the bi
003CMGD0080026671F67
003CMAV0080026670F18
Update group for statistics up
000001
Division
GD
AV
Reference Document Number
0090075253
0090075252
Assignment number
0090075253
0090075252
Translation Date
20091202
20091201
Payment Reference
0090075253
0090075252
Regards -
How to create Invoice list??
Hi guyz,
could you please tell me how to create invoice list, i have created sales order, done the delivery,created billing.
appreciate immediate reply.
Thanks.
Mohammed.Hi Mohammed,
To create an invoice list:
Select the Billing screen.
Depending on the number of billing documents that you want to include, you can choose one of two ways to create the invoice list. You can either
· Select Invoice list Create and enter each billing document separately
· Create a list for all billing documents that are relevant for the invoice list. You can then process the work list for invoice lists.
This procedure shows you how to create the work list.
Select Invoice list Edit work list.
Enter your selection criteria and press ENTER.
The system displays a list of billing documents that meet your selection criteria.
Select the billing documents that you want to include in the invoice list and select Invoice list Save.
You can also simulate creation of invoice lists via the work list for invoice lists. This is useful as a test option. The simulation also allows you to carry out a split analysis, which shows you why billing documents are written to different invoice lists (e.g. due to different payers).
Prerequisites
You can only process invoice lists if the following prerequisite data is defined by your system administrator in Customizing for Sales:
Condition type RL00 (factoring discount) must be maintained and, if required, also the condition type MW15.
An invoice list type must be assigned to each billing type that you want to process in invoice lists. The standard version of the SAP R/3 System includes two types of invoice lists: LR for invoices and debit memos, LG for credit memos.
Copying requirements must be defined (for example, the payer, terms of payment and other fields that must be identical in the documents to be included in the invoice list)
In addition, before you process an invoice list, you must maintain the following master data:
A customer calendar must be defined, specifying the time intervals or dates on which invoice lists are to be processed.
The customer calendar must be entered in the Billing Sales Area view of the customer master record.
Pricing condition records for the condition type RL00 and, if necessary, (e.g. in Germany) the condition type MW15 must be maintained.
Output condition records for condition types LR00 and RD01 must be created.
Hope with this info you can do it. Pl. reward if it helps.
Thanks & Regards
Sadhu Kishore -
Invoice list for cash sales order
Dear SAP guru's
I have a query kindly help me.
My client requirement is for his show room sales (cash sales) for one time customer he wants all the invoices to be in one report.
I already maintained in the customer master data in one time customer in billing data view i maintained the invoice list ,
but still it is not working.
if logically speaks standard sap will not give the cumulative invoice report, it splits the ivoices even i maintain the same name for the customer.
Kindly help me in this regards.
With regards
RamHi bogh,
In IMG under
Financial Accounting -> Accounts Receivables and Accounts Payable -> Customer Master -> Master Data -> Preparation for Creating Master Data -> Define Account Group with Screen Layout
or Transaction OBD2.
if you give me brief i can help you out more.
if helpful REWARD points
Thank you .
Regards
Ramana -
Hi all
I have come accross an anomaly while testing invoice list. The following is my code for getting the invoice list. The problem its that when i test it with customer no 1000 it displays invoice list of 1050 too. This happens ONLY for cutomer no 1000, testing with other entries gives the desired result. Is there anything that i am doing wrong w.r.to the coding part? Thanks
FORM get_invoice_list TABLES pt_customer_list
TYPE /artec/msf_tab_cust_list
pet_invoice_list
TYPE /artec/msf_tab_invoice_list
pet_return
TYPE bapiret2_t
USING pv_open_invoice
TYPE /artec/msf_dte_flag
pv_close_invoice
TYPE /artec/msf_dte_flag.
TYPES:BEGIN OF ty_cus_name,
cus_no TYPE kunnr,
cus_name TYPE name1_gp,
END OF ty_cus_name.
*-- Declaring internal table
DATA:
r_fkdat TYPE TABLE OF ty_fkdat,
lt_vrkpa TYPE TABLE OF ty_vrkpa.
*Declare a date range table.
* DATA: r_rfbsk TYPE TABLE OF ty_rfbsk. "#EC NEEDED
*-- Declaring workarea
DATA: lw_fkdat TYPE ty_fkdat,
* lw_vbrk TYPE ty_vbrk, "#EC NEEDED
lw_vrkpa TYPE ty_vrkpa,
* lw_rfbsk TYPE ty_rfbsk,
* lw_cust_list TYPE /artec/msf_str_cust_list, "#EC NEEDED
lw_invoice_list TYPE /artec/msf_str_invoice_list,
lw_datcfg TYPE /artec/msfdatcfg.
*-- Clearing export table
CLEAR: pet_invoice_list[], pet_return[] .
*-- Get closed invoices within the date range.
IF pv_close_invoice IS INITIAL AND
pv_open_invoice IS NOT INITIAL.
*-- Get open invoices within the date range.
ELSEIF pv_close_invoice IS NOT INITIAL AND
pv_open_invoice IS INITIAL.
SELECT SINGLE * FROM /artec/msfdatcfg "#EC *
INTO lw_datcfg
WHERE type = /artec/msf_cl_common=>gc_price_list ."'PRICE_LIST'.
lw_fkdat-sign = /artec/msf_cl_common=>gc_sign_i.
lw_fkdat-option = /artec/msf_cl_common=>gc_option_bt.
lw_fkdat-low = sy-datum - lw_datcfg-retain_day .
lw_fkdat-high = sy-datum.
APPEND lw_fkdat TO r_fkdat.
CLEAR lw_fkdat.
*--Fetch both the open and closed invoices
ELSEIF pv_close_invoice IS NOT INITIAL AND
pv_open_invoice IS NOT INITIAL.
ELSEIF pv_close_invoice IS INITIAL AND
pv_close_invoice IS INITIAL.
ENDIF.
* Select required entries from the database view /artec/msf_v_inv
SELECT kunde
parvw
vkorg
fkdat
vtweg
fkart
kunnr
kunag
vbtyp
ernam
vbeln
netwr
waerk
FROM /artec/msf_v_inv "Database view of vrkpa and vbrk
INTO TABLE lt_vrkpa
FOR ALL ENTRIES IN pt_customer_list
WHERE kunde = pt_customer_list-customer_no
AND fkdat IN r_fkdat AND
rfbsk = /artec/msf_cl_common=>gc_close_invoice.
LOOP AT lt_vrkpa INTO lw_vrkpa.
lw_invoice_list-cust_no = lw_vrkpa-kunnr.
lw_invoice_list-invoice_no = lw_vrkpa-vbeln.
APPEND lw_invoice_list TO pet_invoice_list.
CLEAR:lw_invoice_list.
ENDLOOP.
Sort pet_invoice_list by cust_no invoice_no.
Delete Adjacent Duplicates From pet_invoice_list comparing all fields.
IF pet_invoice_list[] IS NOT INITIAL.
DELETE pet_invoice_list WHERE invoice_date BETWEEN '19900101' AND '20090101'.
ENDIF.
ENDFORM.hard to read the code, but did you check to see if FOR ALL ENTRIES IN pt_customer_list has rows in the PT_customer_list? If you didn't I'd suggest a review of documentation of FOR ALL ENTRIES. If you did make sure pt_customer_list isn't empty, then disregard.
-
Requirement of invoice list in case of a proforma invoice generation.
Dear Experts,
I have a case where the customer is indulged with the export sales & he had delivered the excisable goods to his customer (or we can also consider it under STO as one of the above case) & wants to arise a proforma invoice in context to this transaction with the delivery document being taken as the reference document in the billing screen VF01; where, as I have already mentioned that the PGI has been done. Now the problem is this that the billing document is not getting generated with an information log that, '_The invoice list cannot be determined_'. Now I am not able to understand that why this is happening? This was the delivery related with a single line item.
I went for changing the billing relevance field at VOV7 from 'A' to 'J' & even tried by changing the copying requirement from '010' to '311' at VTFL, from LF to F8 (as this is normally followed during the issue of free samples & subseqyent free of charge deliveries); but was not able to get the required output.
What to do? Kindly assist.
With regards,
M.S.Kumar.
Edited by: M.Santosh.Kumar on Jan 28, 2011 7:25 AM1) The document flow is like this that between the two plants for e.g. 1000 & 1100 under the same company code the stock transfer needs to take place.
2) Plant 1000 is devoid of the required amount of stock, hence it raised an enquiry for the aforesaid amount of stock with plant 1100
3) Plant 1100 confirmed the availability of stock
4) Plant 1000 raised a purchase order with plant 1100
5) Plant 1100 raised the sales order for the required quantity of stock with plant 1000, & has done the PGI under delivery.
6) Now the plant 1100 wants to raise one proforma invoice with respect to the delivery of goods being done to the corresponding plant 1000 & one commercial invoice for the payments to be made.
7) The processing from raising the purchase order to the delivery of the goods to the respective plant has already being performed.
8) At the moment of creating the proforma invoice with billing type F8, the system is throwing an error message that it is not able to generate the billing document because of the reason that the invoice list date cannot be determined.
or else in the other way, in simple manner what needs to be done when simply the billing document is not getting generated in context to a delivery document because of the reason that the invoice list date could not be determined. Does this have to do anything with the POD time frame or the pricing conditions being defined under the pricing procedure which has not been followed upon while processing the sales order?
With regards,
M.S.Kumar. -
hi,
when I try to post invoice list in accounting I get an error from the system warning me that it can't find document type RV!
I checked it and I figured out that I really miss this document...so:
1) should I create it ??? and how???
2) should I set a different parameter in VOFA for invoice type LR in the field document type?
thank you in advance
mauroRV is an SAP Delivered standard. How come its not on your list? You will not find it in VOFA, you will find it in OBA7.
For Billing Type LR, the Document Type field is Blank and none of my billing doc postings have errors. If nothing else works, try speaking to an SD consultant... cheeky!
Cheers. -
Invoice List - Shipping Point (ShPt) VF24
Good day, I run a invoice list t-code VF24, I get the results and because I need to process invoices for a same plant. So when I process the invoices into 1 invoice, everything works fine. When I cancel the invoice that I have just created, the ShPt(shipping point) does not show on the Invoice list (VF24). Can you advise me urgently on what needs to be done.
The reason for this is that the invoice list has
no item data. Please look at VBRP for any invoice list using transaction
SE16.You will see there is no data, there is only header data recorded
(VBRK).
So as no item data was copied from the invoice to the invoice list
(via item copy control), the shipping point data (an item field) is
not copied across. This is standard.
So when you then cancel the invoice list, there is no shipping point
data to write back to VKDFS.
Please run the report RVV05IVB to resolve this -
How to include old invoices in the invoice list
How to Include old billing documents in the invoice list.
TO be more clear:-
I created 20 invoices in the monthof JAN
I maintained the factory calender in the payer master in the month of Feb 1st and created 10 more invoices in this month.
So the system is considering only the invocies which were generated after I maintained the factory calender (Only feb invoices).
Is there any process to include the previous invoicies (Jan invoices) also to get include in the invoice list.
Help me in this regards.
Regards,
Mallesh.It is not possible.
Regards,
Rajesh Banka
Maybe you are looking for
-
Photos suddenly way too dark?
Okay, here's the info: -Just updated to Mavericks (works fine) -Updated iPhoto -When I launch iPhoto on my MacBook, all my photos look fine -When I connect my external monitor, the photos look too dark. -I've confirmed that the Color Profile for the
-
How do I clear out a previous image
I had been using the .SetSize 0,0 successfully, until the images got larger then 8192 x 25000 at which time I get not enough memory errors.
-
Re: US-UK communication options
My question is a bit simpler. We will be in the UK for two weeks. And don't expect to use Skype a lot. Do the rates between US and UK apply when you are in UK? Or are there different rates from UK back to us? Currently we have a U.S. Account.
-
Photoshop Photography Program & CC Suite aplications
I signed up for the Adobe Photoshop Photography Program, which is supposed to include just Photoshop CC, Lightroom 5, and Bridge CC, as far as I know. However, after running the CC installer I now see the full suite of Creative Cloud programs availab
-
Imported RAW from my D50 and Aperture says its an unsupported image format, is it me or them? I don't see anyway to update/upgrade aperture, any suggestions? iMac G5 Mac OS X (10.4.3) Nikon D50