Invoice not updated even after rebate recalculation

Hi,
I am facing issue with 14 invoices which are not being updated with Rebate even after rebate recalculation.
Below screenshot of one of those invoice, where it says that agreement exists.
the entry is present in VBOX as well.
Agreement validity period dates are also ok.
And after SDBONT06, the agreement still shows the message that "sales volume is not current"
Kindly check that what could be the issue here which is stopping the invoice and agreement to be updated.
Regards,
Aayush Jain
SAP SD Consultant

Hi Aayush
The message 'condition record exists but has not been set' just means that currently in the document the condition is not present but if you created the same document item now pricing would find a valid condition. SDBONT06 normally would do a new pricing of the rebate conditions with pricing type I and in these circumstances you should expect that it would find this condition if it falls within the validity of the agreement.
So you issue here is why SDBONT06 does not find the condition.
The field 'business group' in your access sequence.
Is it a standard field fomr KOMG that is filled in standard or is it handled in a user exit ?
It would seem likely that this field is filled in the billing transactions VF01/VF02 etc but it is not
filled in VBOF ?
Check how it is filled.Have a look at note 391314 this descibes what you have to consider  regarding the internal tables for Z fields when using custom fields in your access sequences.
I hope it helps you further
Kind regards
Brian

Similar Messages

  • Accruals not updated for Changed Rebate agreement when VBOF  performed.

    Hi Pals,
    Need your assistance in solving an incident  . our client has changed the  valid to date  of the  rebate agreement on 29.04.2014  in VBO2  from 28.02.1014 to 31.12.2014, later it was observed that  the rebate accruals for the blling documents generated after 28.02.104 to till date were not updated even after running the report VBOF. There are 15000 invoices after 29.04.2014 , hence it is difficult to check which invoices carries my rebate condition type.
    hence pls advice on
    1. how to find out the invoices for the changed agreement .
    2. How to update the accruals for the invoices that were created after  28.02.2014 to till date.
    An early reply would be highly appreciated.
    Br
    Krishna.K

    Dear krishna
    i tried your scenario--so after changing the validity for my Material rebate agreement type--i ran VBOF(SDBONT06)--so system has shown the updated billing doc with rebate which was not having any rebate condition earlier.
    Have you tried by retrieving all the billing docs created after service render date of 28th Feb14.
    Please take all the billing docs created after this date from VBRK table and you check some random billings docs whether rebate condition type is active with condition record or not.
    (other wise you try with by executing condition record numbers in KONV(doc condition number--then followed by VBRK)
    pl update us..
    Phanikumar

  • Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options.

    Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????

    SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.

  • Social App not working even after update from noki...

    nokia n8 social loading feeds.
    My wife and i have the same problem now, only last week she said my phone will not work on facebook the widget on main home screen will not load feeds at all, and the widget is now blank saying refresh all the time, so i linked the phone up to the computer and did a scan for new updates with nokia updater which you can download from nokia site.
    Its now the 4th jan and the phones still will not work even after and update from a socail app,
    nothing , facebook will load after a few pushes, and looks like its loading till it says loading feeds then it says the (wording unable to load news feeds) 

    Uninstall the social app and reboot your phone. Then go to software updates and reinstall from the offering given in the updates. I've uninstalled and reinstalled social twice and it has worked both times.
    blitZkid
    Nokia C7: Running on Nokia Belle
    "If I'm helpful in anyway, a click of appreciation on the star would be nice"

  • While i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

    while i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

    Hi there aliyan,
    I would recommend taking a look at the troubleshooting steps for "No SIM" found in the article below. 
    If you see 'No SIM' alert on iPhone
    -Griff W.

  • Can not update apps after IOS8 update on iPhone 4s

    Can not update apps after IOS8 update on iPhone 4s
    I can no longer update apps on my iPhone 4s after the IOS 8 update. The IOS 8 update took a very long time to complete, maybe 12 hours, and afterwards, it worked but updating packages were very slow. Package updates have since been problematic and about 4 days ago, it stopped being able to update any packages. I click on them to update and they never make any progress. I have 2.8 Gbytes free and I keep deleting more and more packages, pictures, etc. It seems like, from the amount of stuff that I have deleted, I should have more than 2.8 Gbytes free.
    Is anyone else having this kind of problem?

    16GB iPhone4: Go to Settings, scroll down to iTunes & App Stores and touch. At the top of the next page it shows: Apple ID. Touch this. Select Sign Out. Your Apple ID will go away. Re-enter Apple ID and password. Try App Store again.
       Other solutions were to go to Settings:General:Date&Time and turn off auto-update, then change date to next year. This didn't work for me, nor a lot of other users on the forums. It took reading a lot of threads to find the log-out, log-in solution. Even on the official Apple Website all I saw was: Make sure your connection is working, battery is charged, desktop is plugged in when you try to sync. OK I exaggerate, but with all the users posting this problem, you'd think they'd post their solutions when they work with a Tech Help call.

  • The g, h and backspace on my keyboard are not working even after replacing with a new one.

    The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
    ...am waiting for a QIUCK RESPONSE

    How does a usb keyboard attached externally work?
    You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too. 

  • Change Button Not Active even after Delivery Completion Indicator is Remove

    Hi ,
    In SRM 5.0 ,Change Button Not Active even after Delivery Completion Indicator is Removed for Completed PO to cancel the GR or make changes.
    Thanks & Regards,

    Hi,
    Please check these notes.
    Note 1267916 - PO item flags do not stay checked
    Note 1174982 - Return/deletion of confirmation does not update the PO flag
    Thanks
    Zameer

  • Itunes shows only 4.3.5 update even after downloading itunes 10.5 on mac..

    itunes shows only 4.3.5 update even after downloading itunes 10.5 on mac..

    Problem solved.
    In iTunes, I selected Backup from my iPod's contextual menu under Devices. I then did a restore and all the music is back. It only took a few minutes.
    These choices are only available via the device contextual menu, not the main iTunes pull-down menus.

  • Lync photo not updated even AD Profile is already updated

    Hi Gurus,
    I have similar issues with others in the forum which photo in lync client is not updated even though the its already changed in Active Directory. The others said we have to do this step :
    1. Run Update-csaddressbook
    2. Delete cache files ( ex : [email protected] )
    I did those steps but still have no luck on the issues. Is there anyone have this experience or have any solutions for this issues. Thank you very much.
    Regards,
    Maliq

    I agree with Johan...
    What Exchange server are you on?
    First run Update-CsUserDatabase - this sync FE database with AD info
    Running with -verbose will post that replication will take place in 5 minutes..
    Then run Update-CSAddressbook - This update the FE address book with the Info from its own Database
    Once again this will tell you it will begin replicating in 5 minutes...
    After 10 minutes you should be able to clear the cached files from the client and restart lync ...
    Here's a script a created to clear teh cached files on a client system, this should be run as teh standard user, as it grabs teh logge don users creds and clears the directory according to the logged on user..
    Save as a batch, on a network share accessible by everyone and run away safe time!
    @echo off
    :Start
    echo.
    rem ###### Check if Lync is running, exit if it is... #####
    tasklist /fi "IMAGENAME eq lync.exe" | find "lync.exe" >nul
    If %errorlevel%==0 goto LyncIsRunningError
    rem ###### Grab logged on user info, and remove Lync cache files, All of them! ######
    for /f "tokens=2 delims=\" %%a in ('wmic computersystem get username ^| findstr /v "UserName"') do @set username=%%a
    set uname=%username: =%
    If Exist "C:\Users\%uname%\appdata\local\Microsoft\Office\15.0\Lync\" rmdir "C:\Users\%uname%\appdata\local\Microsoft\Office\15.0\Lync\" /S /Q
    echo Clearing Lync 2013 Address Books... Done!
    echo.
    echo Sign back into Lync 2013 to download the current address book.
    goto End
    :LyncIsRunningError
    echo ERROR: Lync found to be running, closing all instances!
    taskkill /f /im lync.exe
    taskkill /f /im UCMapi.exe
    echo Done, waiting 5 seconds and trying again.
    timeout 5
    echo.
    goto Start
    :End
    And do you have any idea of difficult it is to place a cmd output into a variable in BATCH scripting?! redic!
    No it will say it can't remove a certain folder in the cached location if the user has outlook running... i didn't no script to close outlook for it doesn't get effect, or it still works either way..
    I'm also going to add that you go onto the FE server and check the attribute on user contactcard to ensure that the DisplayADPhoto attribute is set to True..
    Logon onto FE server - open powershell - and user the export-csuserdata command with the -legacy option to export as an xml file and then open the xml in IE and search for that attribute...

  • Iphone 4 front camera not working even after reboot,resets and restore.

    i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
    Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

    If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
    How to back up your data and set up as a new device
    Apple - Support - Service Answer Center

  • My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. What should I do?

    My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?

    Try:
    - iOS: Not responding or does not turn on
    When it  says place the iPod in recoverymode use one of these programs.
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                  
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it.  I performed a Time Machine installation from

    CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it.  I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps).  So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens.  What next?

    Try...
    Adobe Creative Suite Cleaner Tool
    helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
    http://www.adobe.com/support/contact/cscleanertool.html

  • After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

    After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

    Have you run it in a debugger? That will show you exactly what is happening and why.

  • Hi tutor,my system preferences remains in hang and it does not respond even after force quit.May i have a advice la

    my sytem preferences remains in hang and is not responding even after force quit,may i have suggestion la

    Hello: Welcome to Apple Support Communities!
    Could you specify the Mac OS X version and also what computer you
    are using it on, with some detail? Some of these kinds of issues, while
    they may seem the same across various years of OS X, can have
    different causes and also different cures.
    With that information, someone may be capable of researching a reply
    most suited to try & see if it works in your computer + OS X system.
    One idea, which may/may not help, would be to start the computer
    from its most recent OS X DVD install disc, unless it has OS X 10.7
    or Later, where there is a Recovery partition on the HDD to boot from.
    Then use Disk Utility> repair disk, while there, also repair permissions.
    Thanks.
    Good luck & happy computing!

Maybe you are looking for