Invoice print country name

Dear Experts:
When printing invoice to customer, the country name will be printed in last line.
When the customer is EU country, the country name will not be printed in last line.
"Print country name" flag is set in OY01.
How can I print EU country name in last line on invoice ??
Shwan Wang

Hi,
What i understand of this is that you can either select - EU country or Print Country Name.
Since European countries dont print country names at the last line of the address, i believe you wont be able to print EU country in the last line based on standard settings.
Regards
Ravi

Similar Messages

Receivables - ARDLP Report Not Printing Country Name

AR Report ARDLP for concurrent program Dunning Letter Generate is not printing Country Name on send to and remit to part of the letter. Though the package 'arp_addr_label_pkg.format_address' is giving the output with the country name(when I ran the package in SQL Developer) but when I run the report it is not giving the country name. What could be the reason?
Thanks,
Sravanthi

Thankyou very much Nagamohan. It is printing the country now on the dunning letters. I think it was because of settings in system options though the default country was set, print home country was unchecked. When I reran the process it printed the country.
The Statement print program also had the same issue. Now after the changing the system options, it is printing the country in the send to address but not in the remit to address if the countries are same for both send to and remit to. If they are different it is printing in both the places. Eg. If it is United Kingdom in both send to and remit to, its printing only in send to. If its united states in send to and united kingdom in remit to then its printing in the remit to area. Any idea on this?
Thanks,
Sravanthi

FI Correspondence Print Country Name in all Addresses

Hi Experts,
I am using form script to print payment advice as correspondence and below is script (SAP standard) I am using in element "Address". My client has the requirement that even if the vendor is local (of same country) then also in the address data COUNTRY NAME should be printed.
I understand there is some conceptual logic due to which for local country addresses country name is not printed.
Any way through which we can print country name even for the local vendors?
/:   ADDRESS PARAGRAPH AS
/:   TITLE       &REGUH-ZANRE&
/    :NAME        &REGUH-ZNME1&, &REGUH-ZNME2&, &REGUH-ZNME3&, &REGUH-ZNME4&
/:   STREET      &REGUH-ZSTRA&
/:   POBOX       &REGUH-ZPFAC& CODE &REGUH-ZPST2& CITY &REGUH-ZPFOR&
/:   POSTCODE    &REGUH-ZPSTL&
/:   CITY        &REGUH-ZORT1&, &REGUH-ZORT2&
/:   REGION      &REGUH-ZREGI&
/:   COUNTRY     &REGUH-ZLAND&
/*   FROMCOUNTRY &T001-LAND1&
/* Inserted,see Sap Note 167440
/:   ADDRESSNUMBER &REGUH-ZADNR&
/: ENDADDRESS
Thanks and Regards,
Prashant Rane

Hi Michael,
Thank you for your reply.
Could you advise yow to change this to see the Country Name and Code in Print form
Thanks & Regards,
Venkataraju

PLD:Print country name in 'Bill To' & 'Ship To' Address

Hi.
I want to print "Bill To" & "Ship To" address but the problem is that it is printing country code instead of country name.
Is there any solution?
Regards,
Uday Shankar

To set the default address format for a country go to Administration -> Setup -> Business Partners -> Countries and choose an Address Format.
The system will use the address format based on the BP Bill to country so let's say you create an Invoice for a customer who's Bill To country is UK, then in the address field on the invoice the address format set up under Countries for UK will be used - so if you set this address format under Address Formats for UK to display the Description, on this invoice you will see United Kingdom instead of UK.
Hope it makes sense.
Regards,
Nat

PLD cant print Country name when I link country code field to OCRY variable

Dear Experts,
I am using PLD, and from the database variable OCRD we have the OCRD.Country field which returns a Country Code, I link it to a OCRY.Name database variable, hoping this variable can print me the country name.
However, it doesn't, what am I missing here? Is it a PLD bug?
Thanks!
Warmest Regards,
Chinho

Hi Chinho,
You are welcome.
The link to is slightly different.
Say if you added a database field to a layout such as contact name. Next to the contact name you may have a text field that contains the text "Contact:" This will look on the layout like
Contact: Joe Bloggs
You can link the "Contact:" text field to the field ID of the database field, if you do that and the database field is empty then the text "Contact:" will not show.
There are a few other uses, you can link a field to a formula field, an example might be that a customer wants to show a big logo on page 1 of documents, if it runs on to multiple pages show a smaller logo. Here you can add the following fields.
1. A big picture field showing the logo
2. A smaller picture field showing the logo
3. A formula field that calculates if the page number equals 1
4. A formula field that calculates if the page number does not equal 1
Link the big picture to field 3 and the smaller picture to field 4.
There are many other scenarios, but both the Link To functionality and the Relate To functionality are useful.
Kind regards,
Adrian

Country name not printing for EU countries

Hello,
I am using the SAPscript Z_9H_RVORDER02 for printing sales quotes. For EU countries, I notice that the country name is not getting printed in the address.
In the customization OY01, I even checked the checkbox 'Print Country Name', still it does not print the country name. Is there any other setting that I need to make in order to get the country name in the address for EU countries.
Thanks,
Rugmani

Dear Rugmani,
I think this is related to output program issue so,
Please take help of ABAPer and ask him to debug the program, chek how the country field is capturing in the output.
There is a Function Module to capture the address please check that also.
I hope it will help you,
Regards,
Murali.

Avoid printing the Country name in the SAP Script

Hi All,
I am printing the address of the ship to customer in SAP script using ADDRESS and ENDADDRESS. The address is formatting based on the country code that I am passing in the COUNTRY parameter. Everything looks fine. But here my requirement is It has to display the address according to COUNTRY parameter and it should display all the part of the address except country name.
I am using the following syntax
/:   ADDRESS PARAGRAPH AD LINES 7
/:     NAME     &IT_SOLDTO_ADDRS-NAME1&, &IT_SOLDTO_ADDRS-NAME2&
/:     STREET   &IT_SOLDTO_ADDRS-STRAS&
/:     POBOX    &IT_SOLDTO_ADDRS-PFACH& CODE &IT_SOLDTO_ADDRS-PSTL2&
/:     CITY     &IT_SOLDTO_ADDRS-ORT01&, &IT_SOLDTO_ADDRS-ORT02&
/:     POSTCODE &IT_SOLDTO_ADDRS-PSTLZ&
/:     COUNTRY &IT_SOLDTO_ADDRS-LAND1&
/:     REGION   &IT_SOLDTO_ADDRS-REGIO&
/:   ENDADDRESS
for example if I pass COUNTRY = 'DE', it is printing country name as 'GERMANY'.
Please advise me how to avoid the country name alone from printing in the address.
It is very urgent requirement. Points will be awarded for helpful answers.
Regards,
Yellappa.

Hello.
Since it's only one script, you can always do it without command address, like this:
* &IT_SOLDTO_ADDRS-NAME1& &IT_SOLDTO_ADDRS-NAME2&
* &IT_SOLDTO_ADDRS-STRAS&
* &IT_SOLDTO_ADDRS-ORT01& &IT_SOLDTO_ADDRS-ORT02&
* &IT_SOLDTO_ADDRS-PSTLZ&
If a field is not formatted as your needs, you can always convert it yourself, it's not that hard (in driver program or create a PERFORM in script).
Hope this solves your problem.
Best regards.
Valter Oliveira.

Country name is not printing F110

Hi All,
The country name is not printing on the check when using transaction F110 for one vendor. I checked the vendor master and country is there. I do not have any idea about transaction. Please help me find out what is causing the error.
Thanks,
Veni.

Check printing SAPScript uses the Address ... Endaddress command of the SAPScript.
In this command, if you provide the sender country as fixed value than, it will not print the country for the vendor in the same country.
/: FROMCOUNTRY sender country
Check this help:
http://help.sap.com/saphelp_40b/helpdata/en/d1/803238454211d189710000e8322d00/content.htm
Regards,
Naimesh Patel

How can I print the country name on an envelope in Program contacts?

How can I print the country name on an envelope in Program contacts?

On the normal vCard in Contacts I wrote in the name of the foreign country, for example:
Michael Meyer
13 Kinsington Road
VT Worthing
Great Britain
If I want to print this on an envelope there is no Country in the preview, how can I get in this Example Great Britain on the envelope?

Excise invoice printing is required in preprinted stationary format.

Dear All,
I developed a new program & script for excise invoice printing. The requirement is as under: Page layout will be such where 10 line items( as maintained in billing document) can be printed in each page i.e. if billing document have 25 line items (including Finished goods & accessories) , so it should be printed in 3 pages. In each pages, page no should be printed first, then consignee address, customer address, Date, SO number, Tin no etc. Those above details should come in header portion of each page. Then first 10 line items can be printed. If there are more line items, then next 10 items get printed in next page & so on. In the very last page only assessable amount, Tax, VAT, Educes amt & Gross amt along with Excise number, removal time, type if invoice, payment mode etc (in footer section) should be printed. If billing document have only 10 line items, it will be printed in a single page.
I have declared First page & next page only. In each page I have declared required page window according to window size of preprinted stationary format. For that I have used DINA4 page format( size 210 / 297 MM). But actual height of stationary format is 12 inch ( 305 MM).
In print preview it is displaying supereb. All required data is being displayed properly. But when I am taking printout from Dot-matrix printer, from second page onwards it start printing two lines prior to actual position (two lines going up).
I did some permutation to adjust it. But I can not find a proper resolution to it. My thinking is that it is only printer setting problem. Also in PC level in printer setting I used custom paper size declaring actual paper width & height.
Please advise whether it is script/ program problem or printer setting problem.
Regards
Srimanta

Dear Bapujee/Santosh/Srimanta,
I know this is a very peculiar problem. Actually the SAP paper size definations are over-ruled by spool server's print manager's defination i.e. the setting of the PC's finally works.
Simple solution is create a paper size in the PC and set the printer with the new paper size.
Now, you will encounter another problem. The user may using the printer for other paper size printings also. To avoid the changing of PC's paper size every time the user prints different size, you can adopt this :
In the spool server (i.e. the PC with printer), create different printers with required paper size and name this printer with some meaniful names. Now, in R/3, while printing with LOCL output device the user can select the required printer.
This can be done for network printers also.
All the best.
With Regards,
Abhijeet.

Excise invoice printing problem (page skiping)

Hi all,
Issue: Excise invoice printing as maintained in billing document.
In each page, page no, address, so no etc will come in the header portion.
In main window, I have to print out 10 line items of billing doc.
If line items exceeds 10 lines then subsequent items should be printed in the following page. And at the very last page, asseable amount, vat, tax amount, mode of transport & amount in words should be printed.
It is getting printed superb without header text of billing doc.
Requirement is that after printing completed of all line items, first seven line of billing documents header details (eg FG, semifinished, packing, size, etc.) are to be printed.(eg if line item is 10, then header details will be printed in the last page containing footer details). I have declared two text element in main window (one is item, another is header text). My requirement is to control dynamically print of items as well as header text in main window. I have declared 7.60 MM of main window height which is suitable for only 10 line item printing. Header text will come only on last page. I have declared 7 different header text variable in main window as maintioned in driver program. If there is no header text in billing document, it is giving 7 blank line feed after items printed.(eg if i have 10 or 20 line items then it is giving one extra page for 7 lines blank header text). I want to control this page skipping. If there is no header text then I want to finish printing in that particular page where items are being finished. It should be dynamic.
Pls help.
Srimanta

Hi,
What i understand from request is to print the header data if exit and not then do not print the header data bust need to print the tiem data.
For this the solution is as follows:
1) define the header data in separate window (but not in main window) and name this windiw as header and also place this window on top of the page i.e. adjust the window to pribt on top of the page.
2) Now place the condition for this wibdow i.e. to print if the header data Internal table or variable field data is ne space.
with above said details te header window will print if there is data only and this will print on all pages.
Do let me know if ou need any more details in this regard.
Regards,
Raghotham Reddy.
if this is rght solution for you then do not forget to allocate reward points.

How to get the Country Name details always in Eng while using the SForms

Hi Group,
I have a requirement as under:
the Smartform has to display the COUNTRY NAME - always and it should be printed in ENGLISH only.
The Smartform is having a Alternative option(for printing the Address) and for YES part(for certain countries) - the fm "ADDRESS_INTO_PRINTFORM" is being used and for the NO(for the rest of the countries) part an ADDRESS TEMPLATE is being used....
The issues are:
- the fm 'ADDRESS.......FORM" is printing the COUNTRY Name for certain cases and for the rest it is not...
- the Address template has no option to do any manipulation on the COUNTRY Name to come
how can have the COUNTRY NAME to appear in both the cases(YES part and NO part) printed in ENGLISH always?
I tried for a USEREXIT "EXIT_SAPLSADR_900" but still not able to tweak it and get the COUNTRY NAME always in ENGLISH.
Kindly provide your valuable inputs.
Regards,
Vishnu.

          Hi Laura Taylor ,
          Thanks for your Reply and Thanks for ur Guidelines.
          Thanks & Regards
          Subu.
          "Laura Taylor" <[email protected]> wrote:
          >
          >Unfortunately, there is no way to determine the country unless the client
          >indicates
          >that to you directly(i.e. via a form input value). However, there are
          >two request
          >headers that can help you determine the language preference(s) of the
          >client:
          >
          >Accept-Language -- Specifies the language preference(s) the client prefers
          >to
          >receive.
          >Accept-Charset -- Identifies the charset(s) the client understands.
          >
          >Laura
          >Developer Relations Engineer
          >BEA Support
          >
          >
          >"Subu" <[email protected]> wrote:
          >>
          >>Hi ,
          >> i have a requiremtn in which i want to display the country name
          >from
          >>where
          >>the user browse our webpages . for example if he is browsing from us
          >>, then i
          >>should display US and if he is browsing from UK , then i should dispaly
          >>"uk" etc...
          >>can anyone guide me how to proceed .
          >>
          >>thanks in advance
          >>
          >>Regards
          >>Subu
          >

Sales Invoice Print

Hi,
We are into retail showroom. In the sales invoice printed, we need the incoming payment details, or A/R Credit memo adjusted against if any.
Any solution?
T&R
Iyerchandra

hello
do one thing open ur pld for sales invoice and take one database field in the start of report and select the database field and give table name as oinv in properties field and select column name as comments then save the pld now u can see A/R invoice Remarks.
regards
jenny

Country name displayed on FB60 screen is not correct !

Dear all my friends !
Please help to show me to way to solve this issue :
I am now using ECC 6.0
My server is located in Japan, Window JP
My language is set as English.
I have create a Vendor in English, all information in English, Communication language in English too.
issue : when i using T-Code FB60 to create invoice, after enter vendor code, system auto display vendor address, all address information is displayed in english except for country name, country name is displayed in Japanese.
please help me to explain the cause of issue and show me the way !
many thanks !

Hi,
Could you please tell me how you solved this problem.
Because I am also facing the same issue....with some address fields, which are maintained in Thai language for some vendors in International Address Field. Rest others are coming well.
A prompt help would be really appreciated.
Thanks.

How to print the name of the layout

Hi to all experts!
There is a way to print in any coommercial document (A/P Invoive, A/R Invoice, Delivery notes and so on...) the name of the layout printed??
And there is a way for the layout created for some query, to print the name of the layout and the name of the query?
Thank's in advance...
Edited by: Gianluca Calloni on Nov 6, 2009 9:33 AM
Edited by: Gianluca Calloni on Nov 6, 2009 9:35 AM

>
Madhan Babu C wrote:
> IF u need to print the PLD Name in Print. Try this,
> ->> Open the Require System PLD and Save as the New PLD.
> ->> Create 1 Database Field in Footer and assign the field.
>
> Table - RDOC
> Column - CardName.
>
>.
Ok.. But when i put a databasefiled in pld, i don't have the RDOC table....
Madhan Babu C wrote:
> ->> Create 1 TEXT field in Footer on PLD and HardCode the PLD Name.
> Regards,
> Madhan.
Yes.. I think is the only solution...

Invoice print country name

Similar Messages

Maybe you are looking for