Invoice Print out problem

Hi Gurus,
In my invoice there are 4 line items.only last two line items are taxable and in print out system has to display the text on below four items.Currently its showing the text as " CA Tax-GST 5% of 7,800.00 CAD which is wrong, as its showing the total value of all the four items, It has to display the text in this format " CA Tax-GST 5.% of 1900 CAD which is total of two taxable line items .
We are using SAP scripts. Please let me know where I have to done the changes to show the text in above format.
Regards,
Hari Challa.

Hi,
First find out the output type to print the invoice and using this o/p type find the print program and layout name. Then copy the print program do the necessary modifications and assain the new program in o/p type.
Regards,
Jagadeesh.

Similar Messages

Excise invoice print out

Hi All,
We need to take Excise Invoice (J1IV) print out. we are using ECC 6.O version, what is the Tcode for taking the excise invoice print out.
Thanks and Regards
Chandru

Hi All,
Thanks for your updates,
I have tested with Tcode J1IP to take print out of Excise invoice with out put type J1I0 and flagged inculde printed excise invoice.
After clicking print invoice (F8), i'm unable to take the print out. No pages displayed.
Please help me to resolve the problem.
Thanks and Regards
Chandru

Australian ABN in Customer Invoice Print out

Hi,
I am using the standard ByD Customer Print Out and everytime I print out, the two fields Our ABN and Your ABN are always blank.
We have maintained the ABN of both our company and customer company under Financial Data/ Tax Data but somehow they does not appear in the Invoice Print out (PDF). The customer ABN appears in the ByD Invoice though.
I checked the form and they are using standard data binding which displayed for other countries but not Australia.
Anyone has the same issue and know how to solve it?
Thanks.
Nguyen Ly

Hi,
Please check the table J_1IMOCUST for the customers you will find all the details like TTIN ,LST,CST ECC no. etc....
(J_1ILSTNO,J_1ICSTNO -fields)
Regards,
Krishna O

Print all delivery number on invoice print out

Hi ,
When we create a invoice against two delivery only one first delivery number shown on invoice ?
but my client want to print all delivery number on invoice print out.
can you please guide me how to provide it coz only one delivery print .
Regards,
Aditya

Hi Adhithya,
Ask your Developer to add all the Deliverys under the billing form need to print in the billing
give him the logic VBRK-vblen go toVBFA pass the VBLEN pick all deliverys display in the billing form.
which need to add in the out put type.
Thanks...

Excise invoice print out error

Hi Fiends,
i want to get the print-out for the excise invoice for the financial year 2008. while i am giving the print out now its not getting the print out.tell me how to solve the error/problem.

Plz Mention error message what you have get while running the program for print which is customised r standard.

Error in SD Invoice print out

Dear friends,
We have ECC 6.00 since 2007 and system dully upgraded as on 30.12.2010.
we have copied the client 300 production to 200 quality on 27.01.2011.
SD involice created before the client copy is showing the print out correctly as
value 10,000,00.00 in VF03 transaction and the same in print out.
SD involice created AFTER the client copy is showing the print out as
value 10,000,00.00 in VF03 transaction and the print out is hsoeing as 10.000.00,00.
Print out is customized program. we have checked all the aspects including printer driver, spool, program, etc.
Invoice before 27.01.2011 shows correctly in print out but Invoice created after that is wrong.
We have tested in 300 & 200. Smae problem.
BUT WE HAVE CHECKED IN 120, AND IT IS OK.
We look any advise to check further from you..
Thanks in advance.
Jayant Joshi - Bahrain

Hi Jayant Joshi
First of all check after how many numbers wheather decimals are being used. and is it is a customized program , it is advised to discuss with your technical consultant. and ask your technical consultant to look into the program correctly
As it has been copied from one client to another client , so it is advised to check wheather the customized program Transports are copied completely or not.So also reach your Basis team to get the information
Thanks and Regards
Srinath

ALV Report with Logo .. Print Out Problem

Hello Guys..
I am facing and differerent problem , I have created one Report in ALV contain logo of my company and some other details as per selection screen.
At the time of taking printoput the logo is not coming in print out only report data is coming.
How I take logo and ALV report in one print out .
Please do the needful.
Regards
Swati....

We Can't take logo of ALV in print out.

Alv report Print out Problem

Hi Experts,
I am having problem while taking print out of Alv report format. In that report, 1 column contains Unit Values.
Eg. Unit value - 'LE' , AFTER USING CONVERSION EXIT LOGIC it is converted into 'AU' which is finally displayed in the Alv -Report display format.
while taking Print-out of that report , that field Unit Value 'AU' is Shown in this format "****'.
Please give me your Valuable Suggestions.
Thanks and Regards
BalaNarasimman M

while defining filed catalog define the data type also
clear l_fieldcat.
l_fieldcat-fieldname = 'MEINS'.
l_fieldcat-datatype = 'UNIT'.
l_fieldcat-no_out = ' '.
l_fieldcat-do_sum = 'X'.
l_fieldcat-seltext_l = 'UOM'.
append l_fieldcat to p_fieldtab.
may be it would help.
anya

VF02 Print Out Problem

Hi all,
We are facing the problem while taking the print out from VF02.
We are using ZFORM designed by our ABAPer.
While using standard form (LB_BIL_INVOICE) its working and while using ZFORM, we are able to see the print preview but not able to take the print out.
Error message is shown as given below
"Output could not be issued"
Message no. VF304
Diagnosis
An error occurred while output was being issued. It is possible, for example, that the form to be issued has not been activated or has an error. An error may also have arisen while the data to be issued was being edited.
Procedure
Check possible causes of the problem.
Thanks in advance,
Babs

Hi babs
Go to VV32 and check wheather the condition record has been maintained or not.In VV32 .
check the access sequence , wheather it is billing type / payer in your output type RD00 .so only for that particular payer only that ouput may be generating . .But also see in the V/40 wheather for the billng type the ZFORM which you have created has been assigned or not .
Regards
Srinath

Print out problem

hi!
I have a little problem with print out.
I want to print out like this:
about two cm space between each number.
I have 4 columns and 4 rows
for(){
System.out.println(a+" "+b+" "+ d+" "+e);
}How do I write?

I think that you mean *\t*. :)
So the code would become:
System.out.println(a + "\t\t" + b + "\t\t" + d + "\t\t" + e);{code}
OR
{code}System.out.printf("%d\t\t%d\t\t%d\t\t%d", a, b, d, e);{code}

MR90-invoice print out

Hi,
While trying to view the invoice output in MR90 ,the system shows the following error"Table RSEG: entry 5105608892 2009 2 does not exist".How to slove this?
Regards,
Renuga.A

Hi,
Actually REKL is used only for reduced invoices (Invoice reduction cases).
the number 2 in error "Table RSEG: entry 5105608892 2009 2 does not exist" represents correction indicator field in table RSEG "Vendor error: Invoice reduction". In your case it should be "No error" as its is a normal invoice.
So, I can say that REKL is not used for correct invoives. It is only used for reduced invoices. If you want print out of correct invoices you have to configure your own output types & include that in procedure.
Nagesh

Photoshop 11 Size Print -out Problem

I have recently purchased and installed Photoshop 11 and I am having problems with my print-out. I am specifying an A5 size print, it is being shown on the preview as being 1/2 of A4 but is printing out as a 6" x 4" . I have tried thios several times but I am unable to overcome this problem. Is this a program error or can you offer me a solution for this problem?
Best regards, Evan Thomas

Make sure that 'Scale to fit' is not checked in the print-dialogue box, and that the scale is set to 100% (bearing in mind that your document size must be correctly set in Photoshop before you print).

57F4 Chalan Print Out Problem

Dear Friends,
I had a printing problem of 57F4 Chalan ( Subcontracting Challan).
After creating 57F4 Challan, when I go to J1IF11 to take a print out, I clicks on Print immediately, system shows pop up for asking printer to print challan. After giving printer name I clickes on print I immediately, System comes out from tnasaction without generating spool.
I am confident about printing settings.
Can anybody suggest what will be the problem and its solution.
Waiting for reply,
Mahesh
Edited by: Mahesh Pethakar on Jul 7, 2008 11:46 AM

Hi Friend,
What is this transaction?
There is no option related to printing.
Can yu help further?
Mahesh

Smartform print out problem : urgent

Hi,
I have developed a smartform to take the printout of the Sales Order created in VA01.
I am facing a problem while taking the printout only if the line item in the sales order are more than 25.
I the line items are less than 25 then I am able to see to the print preview as well as able to take the print out but if the item are more than 25 then I am not able to see the preview also and even able to take the print.
Kindly anybody suggest
Regards,
shyam,

hi shyam..
Remember one thing u <b>always give the first page--> next page will ber first page only.. in u r requirement</b> (because in the firtst u r printing the item details, who knows there colud be chances of items may not fit in 1 page so when the items are more it will give proble if u give the first page next page is second page)
do as follows-- you have 2 pages PAGE1(first page) PAGE2)second Page).. now
1..in PAGE1's give the next page as PAGE1, in the PAGE2 give the next page as PAGE2.
2.. After competion of printing the ITEM details u need to print the ITEM COnditions.. so we will trigger the second page explicitily by using the COMMAND after completion of first page..
for this--> at end of the main window <b>right clice > create>flow logi-->command</b>.
now command widow will be inserted.. in this tick the GOTO NEXT PAGE :inthis give PAGE2. in condition tab of the COMMAND "tick only after end of Main Window.
Please wite if u r proble m is not solved..
Please Close this thread.. when u r problem is solved
Reward if Helpful
Regards
Naresh Reddy K

How to print batch numbers on the AR invoice print out

Hi Gurus;
Here is my question; I need to be able to print batch numbers on the print out of AR invoices, I used variable 492 in PLD and I am able to see the batch numbers directly linked with the AR invoice, meaning that I wont be able to see batch numbers that I entered on the Delivery even is the delivery doc was copy to the AR invoice.
Is there anyway that I can see the batch numbers on the AR invoice print if I entered the batch number on the delivery and then copied that delivery to an invoice??
My client wants to be able to send their customers and invoice with a batch number but he always follow the process from sales order to delivery and delivery to AR invoice and what this means is that he always entered the batch numbers on the delivery documents.
Please help me!!!
Thanks
Jenny

If the ad hoc printer mode is not available for the envy, there are some reasonably cheap ways to get a wifi network in your car. A cheap router from best but will generate the wifi network. Does not matter if you have Internet or not. A ifi device will also work, and most/ all of them run on batteries. Lastly, if you have a smart phone or I phone that generates a wifi hotspot, that may be enough to support the printing function. ( I need to test my I phone later today to see if that works.)

Invoice Print out problem

Similar Messages

Maybe you are looking for