Invoice summary sheet errors in new version-

Until recently I've used Numbers '09 for invoicing and included a 'Summary Sheet' to keep abreast of outstanding amounts.
Screenshot shows what has worked succesfully in Numbers '09 but the same file opened in new version 3.0.1 gives me a red error triangle with the message "The formula contains an invalid reference" - can anybody help please?
Formula from Above screenshot that works in '09 but not in v3:
INDIRECT(A3 & "!Total::B4")

No. Sheets shown in left hand panel are named sequentially and refer to an individual invoice number. So I may have 30+ invoices for a month. Each invoice sheet has a table named Total which has rows for discount, sub total, vat and total owed by a certain date. In this summary sheet I obviously want to refer to each sheet's 'total owed by a certain date' cell and in Numbers '09 the formula was calling each invoice sheet name successfully from column A on this same sheet and then referencing the Total table's correct cell. I'm just trying to be as lazy as poss and when I have a load of invoices to bung on the summary sheet I can just select row above and drag down to populate new rows with sequentially filled invoices numbers with the formula pre-filled.
I've made that sound a lot longer than it probably should have!

Similar Messages

Error in new version map viewer

Dear Sir,
i am trying to install new version 11 mapviewer and its giving following error please can any one help me in this issue
E:\Mapviewer11\MapVQuickstart\mv10131rc1_qs\oc4j\j2ee\home>java -jar oc4j.jar
2006-09-24 22:35:20.540 NOTIFICATION JMSServer[]: OC4J JMS server recovering tra
nsactions (commit 0) (rollback 0) (prepared 0).
2006-09-24 22:35:20.540 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[jms/Oc4jJmsExceptionQueue].
2006-09-24 22:35:20.743 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[jms/jobstore].
2006-09-24 22:35:20.852 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[jms/events].
2006-09-24 22:35:20.993 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[jms/notifications].
2006-09-24 22:35:21.071 ERROR jms.xml: port 9,127 already in use.
06/09/24 22:35:21 *** (SEVERE) jms.xml: port 9,127 already in use.
2006-09-24 22:35:21.071 ERROR Failed to set the internal configuration of the OC
4J JMS Server with: XMLJMSServerConfig[file:/E:/Mapviewer11/MapVQuickstart/mv101
31rc1_qs/oc4j/j2ee/home/config/jms.xml]
06/09/24 22:35:21 *** (SEVERE) Failed to set the internal configuration of the O
C4J JMS Server with: XMLJMSServerConfig[file:/E:/Mapviewer11/MapVQuickstart/mv10
131rc1_qs/oc4j/j2ee/home/config/jms.xml]
2006-09-24 22:35:21.087 ERROR J2EE OJR0011 Exception starting JMS server: Failed
to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConf
ig[file:/E:/Mapviewer11/MapVQuickstart/mv10131rc1_qs/oc4j/j2ee/home/config/jms.x
ml]
2006-09-24 22:35:21.290 ERROR J2EE RMI0002 Error starting ORMI server wrk05-mkab
eer port 23,791: Address already in use: JVM_Bind
2006-09-24 22:35:21.290 ERROR java.net.BindException: Address already in use: JV
M_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:331)
at java.net.ServerSocket.bind(ServerSocket.java:318)
at java.net.ServerSocket.<init>(ServerSocket.java:185)
at com.evermind.server.rmi.RMIServer.createServerSocket(RMIServer.java:4
01)
at com.evermind.server.rmi.RMIServer.createNonSecureSocket(RMIServer.jav
a:313)
at com.evermind.server.rmi.RMIServer.setConfig(RMIServer.java:194)
at com.evermind.server.ApplicationServer.initializeRMI(ApplicationServer
.java:2235)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.jav
a:914)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLa
uncher.java:113)
at java.lang.Thread.run(Thread.java:534)
06/09/24 22:35:21 Error starting ORMI server wrk05-mkabeer port 23,791: Address
already in use: JVM_Bind
06/09/24 22:35:21 Shutting down OC4J...
waiting for immediate reply
Thanks
Kabeer

It seems that you have an instance already running. Verify if you don't have an OC4J running.

Can't install Quicktime - Error "A newer version of quicktime already..."

Hi, I have a Dell XPS running Windows Xp Media edition. Quicktime files would not play so I downloaded the newest version of Quicktime and an error comes up saying, "A newer version of quicktime is already installed. This installation of Quicktime can not proceed while the newer version is installed." I can't find a newer version on the computer and the application seems absent. Only suplimentary Quicktime files are found. Please help.
Thanks,
Eric
Dell XPS Windows XP

I'm having this exact same problem. I have a Gateway running Windows XP Media Edition.
I can't run quicktime, it says it's not there. I've tried uninstalling using add/remove and it says the uninstall.log file is missing. I tried uninstalling using the QT uninstaller option in its folder, it says the uninstall.log is not there. I tried 'repair' option on the iTunes+QT installer that I downloaded. Still the same issue.
I tried the stand alone QuickTime installer and it tells me "A newer version of quicktime already exists".
I tried deleting the residual quicktime folders from my c:\program files. I tried deleting the residual QT references from my regedit. I downloaded the MS Windows Install Clean Up and looked in there--found 2 more things that could possibly be quicktime related and removed those. I tried again -- same error message.
I'm not sure what else to do. I'd really like to get Quicktime and iTunes working by Christmas so I can sync my shiney new iPod.

Error: A newer version of data type was found than one required

Hi Experts,
we made a changes to a table and then transported the table to the quality system. But a program which is referring to this table, results in dump with the below error message.
Error Message>>>>>>>>>>" A newer version of data type <TABLE> was found than one required "
The issue occures inspite of
1. re-activated the table and send to quality system
2. Re-activated the program
3. Activated and adjusted database in SE14.
Please let me know the correction to be taken to resolve the issue.
Regards
Suresh Kumar

This happens when you modify your new data element, domain while another program is currently using it.
Simply get out completely of the program, re activate the program, reactivate the table. You might need to run se14 to convert the database table but this does not happen frequently. Try first to reactivate the program
Dean
Edited by: Dean Ton on Mar 8, 2012 9:54 PM
Edited by: Dean Ton on Mar 8, 2012 9:56 PM

Error Installing new versions of iTunes

Whenever I attempt to install a newer version of iTunes (7.2 and higher) I get an error message, "C:\ProgramFiles\iTunes\iTunes.Resouces\fi.lproj\iPodSettings.nib\classes.nib Verify that you have access to that directory."
I don't know what it means or how to fix it. Any help would be much appreciated.

"C:\ProgramFiles\iTunes\iTunes.Resouces\fi.lproj\iPodSettings.nib\classes.nib Verify that you have access to that directory."
A message like that citing a file in the lproj folders (language resources ... you're having trouble with one of the Finnish ones, i believe), can often be caused by file damage or disk damage in the area of the file in question.
So, try running a chddsk over your C drive:
How to perform disk error checking in Windows XP
Does the chkdsk find/repair any damage? if so, does an itunes install go through properly afterwards?

Error during New Version Creation in Controlling

Hi
I am creating new version in Controlling (tried copying from existing Versions too), and getting the given below error message. We are working on SAP R/3 4.7.
Valuation in controlling area xxxx is inconsistent -> please check
Message no. KT340
Diagnosis
The result from checking the versions for controlling area xxxx is that you want to work with multiple valuations. However, the corresponding version settings are inconsistent.
System Response
The function is not performed.
Procedure
Navigate to the version settings in controlling area xxxx, choose Check valuation and correct your settings.
Please let us know the necessary action for this.
Thanks in advance
Satish

Check Note - 541197.
[Note 541197|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=541197]
Looks like more than one actual version is maintained for Controlling Area using multple valuation approach.
You can check inconstency through Transaction OKevn.

Quicktime uninstall error "A newer version of quicktime is already..."

We have 2 new ipods and iphone. We attempted to install the newest version of itunes but when running the install I get this message: A newer version of quicktime is already installed. This installation cannot proceed while the newer version of quicktime is installed." Sadly, my first response was to uninstall the itunes we had that was running fine (aside from a pop up message that would tell us that some of our quicktime needed updating (not exact words, but I can't replicate the error message)
Unable to uninstall quicktime via window uninstall- I get the same error message as above.
I since have manually removed the quicktime folder from my program files. I have used the search feature to look for instances of quicktime and can't find anything else. I have even, at the advice of another, gone into the registry (start, regedit) and then removed quicktime folders found under apple computer. I have run "advance system care" in hopes to clean up the registry.
I am still unable install itunes and continue to get the same message when attempting to install itunes or uninstall quicktime. I need some help! (my kids are freaking out, thus so am I)

Most likely we're looking at a damaged QuickTime.msi file stuck on your system. (That contains the installation database for the previous version of QuickTime on the system.)
Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for *at least version 3.0* of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes 9.2 again. Does the install go through properly this time?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Some errors at new version 5.1 - Z2

I use "perfect piano" App, when I play on keyboard I hear many tones on one key.
That happened after update new version.and also there is error in Bluetooth icon in bar at top. when I open that, the phone lagged and locked screen.

Do you experience the same lag while booting on safe mode?
How to boot on safe mode on Lolipop
1. press and hold the power key
2. once you get the pop up menu
3. press and hold "power off"
4. Boot on safe mode should become available

Error with new version of nokia ovi suite

Hello update to the new version de ovi suite 3.1.1.9, but say Nokia Ovi Suite 3.1.1.85 PC Connectivity Solution 11.4.21.0 Connectivity Cable Driver 7.1.45.0 Nokia Ovi Suite Software Updater 2011.7.0.61004 Maps Service API 4.0.28.3 Nokia mPlatform 2.7.72 Ovi Desktop Sync Engine 1.4.4.57 Sistema operativo: Microsoft Windows Vista Edición de 32 bits, Service Pack 2 Idioma: English Navegadores de Internet detectados: - Microsoft Internet Explorer 9.0.8112.16421 Stacks Bluetooth detectados: - Microsoft (Versión: 6.0.6000, Compilación: 16386), Activa Controladores USB detectados: - Default Hub Driver for USB 6.0.6002.18005 - USB Modem Driver 6.0.6002.18005 - EHCI eUSB Miniport Driver 6.0.6002.18005 and the cel phone restart and restart again when connect with this new version please repair this is urgent

I followed instructions but nothing happend
It seems Nokia gives me nothing but trouble... W t F?
A not so proud owner of an N8!
Attachments:
cmdprntscr.jpg ‏168 KB

My app suddenly started having problems (very laggy, visual errors), intalling new version got it worse, now doesnt work

I was affraid of losing the photos, so i decided to instal the new version of the app than reinstalling it. After updating the photo bibliary, it crashed, and now it does every time. What should i do?

Back up your iPhoto library, depress and hold the option and command keys, launch iPhoto and use the 4th option - rebuild database
LN

Service entry sheet error.with new material group for services

Dear Experts
We need to create material group for roll shop spare parts service,we created a new material group.
when we are creating PR/PO with item category as D and a/c assignment K( entered cost center here).its giving error message
as RC= 3M8 47 Account determination for entry JSL KBS J001 not possible(while making service entry sheet)
after that i changed PR/PO and gave cost center and G/l account.now the service entry sheet is accepted.
is it necessary give G/L account manually,if user chose wrong G/L account how to avoid this problem.
please clarify me,
do we need to assign valuation class for material group for services?(where to assign)
or
should assign G/L account manually to cost center while creating PR/PO
Please clarify me
Regards,
Varun
Edited by: madhu varun tirupati on Sep 8, 2010 2:48 PM

Hi,
Option-1:-- >
Without creating material group and you can use your other service material group(existing service material group) and create a service master in AC03 as spareservice. Create a Service PO with text as roll shop spare parts service with other details as required like quantity of service, cost center & G/L account etc. After service being completed you can do SES in t.code: ML81N
Option-2:-- >
If you want report at the end based on different material/service group level, you can create a material/service group in OMSF for roll shop spare parts service and then you can assign to valuation class to material group in OMQW t.code. Then carry out regular process service order, SES etc.
Based on requirement, you can enter G/L account manually or can set default G/L account in purchasing document with help of t.codes: OMSK, OMQW, OME9, OMGO & OBYC
For error u201CAccount determination for entry JSL KBS J001 not possibleu201D, you cannot assign KBS transaction/event key to an account in OBYC t.code. Only you can assign G/L account to cost center with your CompanyCode in OKB9 t.code. Check the SAP note: 364570 & 106981
Regards,
Biju K

Still getting Javascript error with new version of UIX

I'm facing some problem after changing my UIX framework version (2.2.3030829.1626).
Currently I'm using UIX version (2.2.3030829.1626) . Paging with table is not working with new frame work .
It is giving me javacript error "object doesn't support property or method" when clicking 'Next' .
It's working fine with old version.
We had used proper cabo directory. These files are in sync with the version of the runtime
Here is our finding
I found a error in _updateFormActions() function from MarlinCoreb2.js file.
In this function it is giving error at
if(a8!=a6)
a7.action=a6 line (line # 1841,1842). If I comment out this two lines page is
working properly without any javascript error.
This problem is a bit tricky....
Because it seems to be a problem with the UIX framework that only occurs on some versions of the Internet Explorer. On some version (IE 6.0.2600.0000) it works fine
and it also works on the Mozilla Firefox browser.
Can any one advice on the same?
Thanks in advance
Anindya

I answered this question on a different thread.
Do NOT post the same question multiple times. If you require more complete or prompt assistance than you receive on these forums, contact Oracle Support.
-brian

MSVCR80.dll error opening new version iTunes

I still am unable to open iTunes after the new update. I still get the MSVCR80.dll error message. I have uninstalled the 4 programs in the order suggested and reinstalled iTunes as Administrator. Still no luck. Same error. What now?

Solving MSVCR80 issue and Windows iTunes install issues.

Error importing new version of our app "Application not available for edit"

Hi,
We are trying to import an app and get the error: Application not available for edit
thats it on a clean white background - Application not available for edit shows up at the top left corner of the screen.
Any clues?
We tried a new id, tried a custom id.
Then we tried deleting the existing app so we could insert the new app.
We can't delete either.
Help!

I'm going to hijack this thread and ask a follow up question to Scott (or whoever reads this).
When we export our application out of DEV it gets exported as Run + Build. When I have the DBA import into test or production on the Import screen I have them set it to Run Only and Reuse the Application ID. After installing it just forwards you to the same white screen with the "Application not available for edit" message on it. Now I understand the actual message since its Run Only, but its not clear that the import actually worked correctly or not.
So although it does seem to import correctly, they always get nervous when they see this that it didnt import correctly. So is it better to have them import as Run + Build and then go change the build status through the admin front end rather than the way I'm doing it now?

I have the following error The file "iTunes library.itl" cannot be read because it was created by a newer version of iTunes

Can anyone help me with this problem. I tried updating the latest itunes and it caused an error MSVCR80.dll missing. I then tried fixing it after reading other people had the same problem and a solution was given about uninstaling itunes and the order in which to do that. I did that but now get the error "the files "itunes library.itl" cannot be read because it was created with a newer version of itunes. I see a solution has been given about this but I cannot find what is suggested to enable me to follow instructions. Can anyone please go through step by step (letting me know where I can find what is needed) to enable me to be able tio log into itues again. Thanks

Hi pussygalore,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
You may want to make sure that in the last step (reinstalling iTunes) that you are installing the latest/newest available version, and not attempting a reinstall from an older file.
Regards,
- Brenden

Invoice summary sheet errors in new version-

Similar Messages

Maybe you are looking for