Invoice verification date

Hi experts
a really simple quest in which table does invoice verification date sit, or do i have to via the change table to get it just as i would for PO release date and if so which tables do i use

Hi
Kader
refer to the table VBFA u can all the neccasary information u want
plzz reward if useful
dont forget to reward
feel free to ask ant thing my mail id [email protected]

Similar Messages

  • Help required regd ERS Invoice verification.

    Hi Experts,
                    I have a requirement where i have to change Invoice verification date to GR posting date. Usually after GR when we look invoice verification, the posting date will be the current date, but according to requirement i need it to change it to GR posting date.
                    I need to see the date changes when i run the TCODE MRRL.
    Please Advice.
    Thanks in advance.

    Hi,
    one possible solution is to activate badi INVOICE_UPDATE and try to change the value there,
    if not by parameters then by field symbols.
    Best regards.

  • L invoice verification

    hai Gurus,
    Can any one plz let me know what r the tables that are used in invoice verification Data source.(2lis_06_inv).
    can any one tell me how to get the invoiced quantity .
    regards
    KP

    Hi KP,
    For further information on <b>Invoice verification</b> Data source. <b>2lis_06_inv</b>
    It shows all the tables related to this DS..
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/57/dad06449114814919000e27dfb255e/content.htm
    Assign Pts if it helps
    Regards,
    Mani
    Message was edited by:
            Manikandan  A

  • MIRO(Invoice Verification) posting date is lesser than MIGO(Goods Receipt)

    MIRO(Invoice Verification) posting date is lesser than MIGO(Goods Receipt) posting date.
    Explanation:
    Miro sholud be posted after the GRN has posted. It means that the Posting date of Miro should be greater than or equal to the Posting date of Migo. But I am facing the issue that I can able to post the Miro before the Migo date..
    For example:  I have posted the Migo(Goods receipt) document with the posting date u2013 10.8.09 and at the same time I can also able to post the Miro(Invoice Verification) posting date as u2013 5.08.09. This is should not be allowed . Kindly give me the solution. Is there any options in SAP standards to restrict this type of Postings(without using user exit).
    regards
    Varadharaj

    Hi
    you  need to use BADi for this INVOICE_UPDATE
    you can give logic as whil;e MIRO system will compare posting date with MIGO doc , then create a Z error msg in se91 nad assign it in that badi
    take help of ABAPer, check following link
    [LINK |GR date lesser than the PO date, the system should show an error message.;

  • How to mass change posting date of parked logistics invoice verifications

    I was wondering if someone can help...
    We are looking if there is a standard SAP program available to mass change the posting date (to a new date in a new period) for a number of parked logistics invoice verification documents.
    Example: Invoices are parked in e.g. April 2010; relevant information is not available before month end; so invoices will probably be posted somewhere in May or June or ...; users now have to individually change the posting date on each parked invoice to the new open month.
    Is there any proces/program that could automate this task.
    Thanks in advance for all your advice, feedback and comments.
    Best Regards,
       Luc Vernieuwe.

    Hi,
    There is no standard tcode , i used Tx Shuttle tool to do this in past for one of my client. ( excel based sap transaction tool)
    Thanks,
    sudhakar

  • GR/Delivery Date required in the Invoice Verification screenlayout

    Dear Forum,
    We notice that when the users perform the Invoice Verification thru MIRO, in the screenlayout corresponding to 'All Information' the system populates the date under the 'Delivery Date' column, however, this date corresponds to the Delivery Date mentioned in the PO Header and does not reflect the actual GR Date. The users want this to be replaced by the actual Delivery Date when the goods were received and GR was posted. Is there a way to replace this or else modify the layout so that the actual Delivery Date is populated. The reason is that the users want the baseline date to be replaced by the actual GR date and do want to go for another step involving the scrutinizing of the PO History.
    Thanks for the help!
    Regards

    Hi Venkat,
    Thanks for the help, is there a way to change the layout of the MIRO screen such that we can view the  actual GR or the Delivery Date while doing MIRO.
    Regards

  • Default check GR-Based Invoice Verification in master data of vendor.

    I want default check GR-Based Invoice Verification in master data of vendor.
    I dont know that how do I config?
    Can you help me?
    Thanks all
    HuyenNN

    Hi,
    It cannot be defaulted , Still you can make Mass change for the Vendor master through T.Code MASS >>Object type : Vendor>>Select Gr Based IV Field, Put the check mark & Execute.
    Regards
    Mascot

  • Invoice verification Invoice date,Posting date and Baseline Date

    Hi Sap Gurus
    Pls Tell Me in detail what Dates should be entered at MIRO transaction,
    Invoice date,Posting date and Baseline Date
    i presumed that the date on the Invoice slip will be Invoice date,
    But in the Invoice the Date is very long back, say a month Older,
    the month of Posting as Posting date, but any posting Date made in MIRO will be Paid after 2 or 3 months so in this case what should be the Posting date.
    at Base line date in the present company Senario the Discount on Vendor payment is literally valid for all the time , say
    In Invoice if the condition is 10% discount if paid in 30 days is given.
    but in actual sense the Vendor is paid 10% less even if he is paid after 4 or 6 months also, so in this case what should be the Entry in Baseline date
    another senario is the vendor has sent only one Invoice for 2 POs how can this be accomadated in SAP
    Pls suggest its Urgent,
    Age may have a Bar, But Points No Bar
    Thanks and Regards
    Sathish

    Hi
    LIV is nothing but You are getting Invoice from the Vendor for your PO   and GR.....and you are checking the Invoice for Price, Qty,Amount etc. by refering the PO  and posting the Invoice...
    Invoice Date : 
               The date of Vendor' Invoice...ie) Date at which the vendor Raised the invoice for his supply against your PO...
    Posting Date :
       The Date at which you actually Verifying Vendor's Invoice and doing the Posting...
    base line date :
        Generally the Posting Date...
    The Imp. of Baseline date is for eg)
    If in the Payment Terms if some conditions are maintained like say
    10% Discount for Payment With in 30 days, if
    PO created on 01.11.2007.
    GR done at 10.11.2007.
    Invoice slip Received at 30.11.2007 but having the Date on it as 20.11.2007...
    So as per your terms you will get 10% Discount if you make the payment on or  20.12.07....
    Here if you keep  inv. Date: 20.11.2007  and Posting Date : 30.11.2007  and Baseline Date as  30.11.2007 ( you cannot maintain baseline date earlier than  Posting date)....even though as per terms the you are  eligible for discount if you make the payment on or before 20.11.2007.....as per the system you are still eligible to get the Discount if you make payment on or 30.12.2007( since you have maintained baseline date as 30.11.2007)...
    this way Baseline date is Importane...
    Generally we use to maintain always Posting Date as Baseline date....
    It is advantageous..
    Reward if useful
    regards
    S.Baskaran

  • Excise Duty (IS-OIL) - Invoice verification and accounting ED

    Hello experts,
    I have a case in my importation process with excise duty (IS-OIL). I have the following scenario: Purchasing Ed free material and receive it in ED paid Storage Location. So I use Handling type 00 and Valuation type TAX in the PO excise duty item data. I woul like to kwon Which is the standard process for the invoice verification of the excise duty cost when the handling type is 00 and the valuation type TAX?. And How can I do the invoice verification (MIRO) if there is not a specific line in the purchase order history for the excise duty cost?
    I have another case in the accounting of movement type 301 (transfer posting between 2 plants). The accounting posting is the following:
    Examle:
    Account                       Transaction
    1. STOCK FUEL          S                    BSX (Stock account)
    2. STOCK FUEL            H             BSX (Stock account)
    3. STOCK EXCISE DUTY     S             SVO (ED Account)
    4. EXCISE DUTY FUEL           H             ZZP (ED Account)     
    The problem is that the 4th account must be STOCK EXCISE DUTY ACCOUNT from SVO transaction.
    I would be grateful if someone could help me with these cases.
    Thank in advance.
    Pablo

    Dear Prashant,
    Thanks for reply, but i checked my excise cond types, in all conditions, cond cat is blank & cond class 'A' is maintained i.e. Discount & Surcharge.
    My problem is that, my excise value is not got posted in net receivable value in accounts. This problem arise, when we make sales order, Net Value field doesn't pick excise there & while invoicing, it post only the base value & rounding off adjustments at header level. I don't know, from where this Net Value field in sales order is picking the value but my problem will solve if my grand total value(base valueexciseedu cess+higher edu cess) will pass to Net Value field while making sales order. Kindly help.

  • Invoice verification with reference to purchase order

    Hi experts,
    May I know is there any setting or configuration that control the data/field copy from purchase order to invoice in MIRO during invoice verification?
    How do we control which field should be copied? If I add another new field in purchase order, how can I make sure it is copy over to invoice in MIRO during invoice verification?
    Thanks & regards,
    JT

    Hi Andra
    Thanks for your reply.
    Actually what I would like to do is that I added a payment method field in PO. And I would like the payment method to be copied into invoice automatically when we perform the Invoice verification in MIRO instead of manually enter.
    Is there anyway to do that?
    Thanks and regards,
    JT

  • Purchase Order Reprot with Invoice verification details

    Hi Friends,
    I need a SAP standard report, in which I can get the PO details for a perticular period of release date along with Invoice verification details, i.e. how much value has been passed and how much is pending.
    Can you please suggest any SAP standard report for the Subject.
    Kraheja.

    Hi
    Check ME2n report with selection parameter as GUTSCHRIFT or ME80fn with purchase order history.
    Thanks

  • Invoice verification:-- complete atleast one line of ACCOUNTINGDATA

    Sap Gurus,
    During invoice verification an error is coming.... " complete atleast one line of accounting data for item 000003".
    In PO account assignment is cost center and item category is services.
    service line item is having 3 parts.
    1st and 3rd  is linked with cost center 25020 and 3rd one to 25030. 2nd is linked with cost center 25030.

    Hi Chintan
    thanks for the Prompt reply. But where can we see the Account assignment from. Is it referring to the account assignment field in PO. The same Account assignment (Cost Center) has been entered in the PO line item as well.
    Thanks
    Nitin

  • Excise duty not apearing while invoice verification in MIRO

    Hi,
    We have created PO with Back date entry eg. 28.04.2010 then received the material in migo on 26.04.2010 also the Excise captured and posted with back date as 26.04.2010.
    Now ewhen I am doing invoice verification in MIRO system doesn't propse Excise duty values.
    Please guide.
    Regards,
    Sananna

    hi
    >We have created PO with Back date entry eg. 28.04.2010 then received the material in migo on 26.04.2010 also the Excise captured and posted with back date as 26.04.2010.
    PO date is 28 and GR date is 26 is it so
    on which day ur doing MIRo try to do it on same day as Gr
    please check any error is giving while doing GR
    the error for PRD is may be due to difference in the Gr and miro amounts
    get with more clarification

  • System is allowing to do invoice verification before goods receipt.

    Dear Friends,
                         I need your help in following scenario, as my system is allowing to do invoice verification before goods receipt.
    To test these scenario.I have created one PO.  For this PO I done goods receipt. I done invoice verification by putting invoice date as past date, posting date system date means current date. I want to stop this as system is allowing invoicing verification to be done before goods receipt.
    Also, I tried after un-ticking GR based IV.
    Please suggest me the solution how to stop this. Please help this is urgent.
    With Best Regards,
    Rajesh

    Hi Rajesh,
    A)
    In goods-receipt-based (GR-based) invoice verification, the invoice relates not to the purchase order, but to individual deliveries. That is to say, the reference document for the invoice is not the PO but the delivery note or the goods receipt document.
    Whether you use this approach depends on your billing arrangement with the vendor. This method can be advantageous, for example, when you know the order will be fulfilled by means of many partial deliveries.
    Prerequisites
    Before you can use GR-based invoice verification, the following prerequisites must be satisfied:
    The indicator for GR-based invoice verification (GR-based IV) must be selected for the relevant item in the purchase order (item detail screen).
    <b>
    A goods receipt must occur before the invoice is entered in the system.</b>
    B) If you are carrying out invoice verification with reference to PO, system will not check for the GR. The entire PO amount can be posted.
    Hope this clarifies.
    Thanks,
    Viswanath

  • Invoice verification - reg.

    While doing invoice verification with respect to po no. it adopts the goods received data as per the goods receipt and its document no.  In some cases it is observed that two or more documents data is displayed in one line item.  Why it is happening? Reply pl.

    Hi Srinivas,
    In Invoice verification with refernce to PO, multiple line items are displayed when you do multiple GR's for the PO Line item.
    If we would like to settle the invoice  for one GR only we can select that line item & post the invoice.
    For Eg:  I craeted a PO for 1000 & I have done GR's as
    GR1- 2, GR2 - 30 & GR3- 50
    I get an invoice for 20 with reference to the delivery note of GR1, in that case i can select the single line & get that posted.
    Reward points if useful
    Thanks & Regards
    Kishore

Maybe you are looking for

  • Group wise Budget.

    Hi, Our client wish to implement Group wise Budget and MIS report available on Group wise Budget. Example, under Salary Budget head 10 items are there. Instead of putting 10 items value individually in Budget they will put total value of salary in Bu

  • Req Delivery Date

    Hello SAP Gurus, Well i am making the Sales order the system is not giving me the todays date i mean the system it giving one day further. means that today is 27 but in required delivery date is 28...so wht the reason for this? even though there is n

  • QuickTime Install Failed Error Code -3 - At Wits End Ready to Return IPOD

    I have been trying to install QuickTime with Windows XP for the past 8 hours. First, I receive the message Install Failed Error Code -3. Then I uninstall software and download and get Error 1722 and the Error 1603 Fatal Error. I'm in a vicious loop o

  • How can we install netdyanics 5.o on Solaris ? What all kind og troubleshooting can be done ?

     

  • How to update iPod touch version 4.0?

    I have an iPod touch 2nd generation (I believe) and it's 8GB. How do I update it to the new 4.0 version? My iTunes says its up to date when I check for updates, but it says that I have version 3.1.3. I am so confused and I don't even know if I can ev