Invoice Verification with price variance

Hi sap gurus,
While doing the invoice with price variance ,system is not giving the error in production server.i have cheked it in customisation setting .But it will give the error in qaulity server.
Please help.
Edited by: Dhawal Desai on Apr 2, 2009 12:58 PM
Edited by: Dhawal Desai on Apr 2, 2009 1:02 PM

Hi,
Please check configuration settings in Quality server & comapre them with production server.
Along with this please check the transport request created in Production server has been transported to quality server or not.
Thanks ,
AMIT

Similar Messages

Invoice blocked for price variance or quantity variance

Dear friends,
In case if in the PO, either there is a price difference between GR and IR or a quantity difference between GR and IR, then does the invoice posted stays automatically in a "blocked" status??
If not, then can we manually do some configuration to make this possible? The intention is that such invoices(with price variance or quantity variance) should remain in blocked status and should not be picked for payment in F110 run.
Please advise asap.
Rgds,
Kunal Vichare.

check this links
http://www.sapfans.com/forums/viewtopic.php?f=6&t=324521
http://www.sapfans.com/forums/viewtopic.php?f=6&t=336490

Invoice Verification with material document - can we check material doc?

hi,
we have Invoice Verification with material documents in MIRO
is there any way to find out (from MSEG or ekbe maybe) if a particular
material document was invoiced or not ?
(without comparing material doc and invoice lines ?)
thank you,
Regards,
michal

Hi
Materials Management under Logistics Invoice Verification u2192 Incoming Invoice u2192 Activate Direct Posting to G/L Accounts and Material Accounts
When you create an invoice containing only items without reference to a PO, the system cannot copy any information (such as currency or invoicing party) from the purchase order. This means that in addition to the document date and the amount, you first have to enter the following information in the header data:
1. On the Basic data tab page: Currency
2. On the Payment tab page: Baseline payment date
3. On the Detail tab page: Invoicing party
Finally, you enter the item data on the G/L Account and Material tab pages.
use transaction FB60 to post vendor invoice
SAM

Invoice verification with reference to billing document in cross company

Hi Gurus,
We need to do "Invoice verification with reference to billing document in cross company code scenarios".
At present I am processing through MIRO by calling the PO.
What is the alternative for this and how to do it?
Thnx

Hi
It is not possible to do the invoice with reference to billing document.
You can create the Invoice referncing the PO used for STO or the delivery note (as mentioned in the Material document) or directly on the vendor.
Thanks & Regards
Kishore

Invoice Verification tolerance price varience

Hi All,
I have set Invoice verification tolerance key PP upper limit 5 % and value 5 in customizing.
I have also set message M8082 and M8083 as error message in customizing.
My requirement is to limit user from posting invoice above 5 % of GRN Amount.
The message customizing is working fine for value (M8082) however I cannot get message M8083 for % of invoice amount tolerance.
I want message M8083 to be triggered at invoice verification which is not happening.

Hi,
If the price in an order item is marked as an estimated price, for this item, the system calculates the difference between the invoice value and the product of quantity invoiced * order price and compares the variance with the upper and lower tolerance limits defined
Please confirm your PO should have following check on condition control tab
and maintain the Tolerance key PS for upper and lower % limits, system first go through Val. check and then % tolerance limit check,
then you will get the message M8083
Sohaib Mahmood wrote:
My requirement is to limit user from posting invoice above 5 % of GRN Amount.
The message customizing is working fine for value (M8082) however I cannot get message M8083 for % of invoice amount tolerance.
I want message M8083 to be triggered at invoice verification which is not happening.
if you want to limit the user from posting the invoice by 5% tolerance, then maintain PP tolerance key,
you will get the message M8082 this will solve your purpose,
If your business demand for estimated price variance then maintain PS tolerance key you will get the message M8083
Thanks
Message was edited by: k j

MIRO - Invoice Verification with reference to Delivery note.

Dear All,
In our organisation we are doing MIRO with reference to Delivery note. As same number of delivery note is being submiited by multiple vendors, after entry of that delivery note in MIRO system shows large list (Closed & Open for MIRO). This becomes difficult to select the required delivery note.
Is it possible to make display of only those delivery notes against which MIRO (Invoice verification has not done).
Also MIRO with reference to GRN number is possible or not ?
Please suggest.
Regards,
Shekhar Kisan Gaikwad

In our organisation we are doing MIRO with reference to Delivery note. As same number of delivery note is being submiited by multiple vendors, after entry of that delivery note in MIRO system shows large list (Closed & Open for MIRO). This becomes difficult to select the required delivery note.
Is it possible to make display of only those delivery notes against which MIRO (Invoice verification has not done).
Also MIRO with reference to GRN number is possible or not ?
HI,
To avoid difficulties post miro with Reference document (PO Reference Tab) - Delivery note click on Radio button a possible entries for delivery note screen will appear. Here you can search specific delivery note by a lot of criteria which will save ur time and effort also you can see MIGO Document. Click and put tick to adopt and post Delivery note / migo and enter required field.

Invoice verification with reference to material document

Dear Experts;
i want to make invoice verification (MIRO) with reference to good receipt document not the all quantity in the purchase order. is this possible ???

Hi,
Option - 1
If you have done 3 separate GR's for the above qtys then if you do MIRO with reference to PO then 3 line items will appear with the respective qtys. You select the one you want & delete the rest.
Option - 2
Check whether you have entered any values in the delivery note field while doing GR. If yes then do MIRO with reference to Delivery note rather than PO so that qty in the GR material doc will flow to MIRO automatically.
Thanks & Regards,

Std report on logestic invoice verification with all condition details

Hi friends,
We are using SAP ECC 6,
we need complete breakup of Logetisc Invoice verification details with all condition like Material, Services, Transport (Condition), Octroi (Condition), Sea Frieght (Condition)
Please reply ASAP
thanks
regards
Jitendra k. Surana.

there is no such std report available....have a customised one.

Invoice verification with reference to purchase order

Hi experts,
May I know is there any setting or configuration that control the data/field copy from purchase order to invoice in MIRO during invoice verification?
How do we control which field should be copied? If I add another new field in purchase order, how can I make sure it is copy over to invoice in MIRO during invoice verification?
Thanks & regards,
JT

Hi Andra
Thanks for your reply.
Actually what I would like to do is that I added a payment method field in PO. And I would like the payment method to be copied into invoice automatically when we perform the Invoice verification in MIRO instead of manually enter.
Is there anyway to do that?
Thanks and regards,
JT

Invoice verification with GR based IV for import PO

Hi all,
Kind advice required here.
We have an import PO where the vendor in VMR has the GR based IV indicator disabled which enables us paying up the custom duty IV.
Now we receive the goods in partial quantities and there are several GRs for the P.O.But whenever we go in for the IV of the GRs the system is accumulating the GR quantity and giving a single figure & quantity (due to that indicator in VMR ).
Is there any way by which we can make the IV on GRN basis?
Because it is requiring manual entries at the time of IV.
Thank you

Dear,
If you create invoice verification against good receipt system give error "Invoice Quantity is greater than good receipt quantity".
So please check Subsequent Debit in MIRO against good receipt.
Regards,
Mahesh Wagh

Invoice Block with Qty Variance

Hi All
In one of my scenarios
PO = 100 Qty - Overdelivery Tolerance - Unlimited
GR = 120 Qty
But as far as MIRO is concerned - my requirement is MIRO should be booked for PO qty only i.e. for 100. (Vendor Liability should be for PO Qty only)
System takes 120 by default from MIGO. Fine, atleast in this case I should be able to set Invoice Block for the Payment.
Currently for the Invoice Block - for Qty Variance Key - DQ - System considers the difference between MIRO Qty & MIGO Qty which zero in my case. So system doesnt set any block.
Any suggestion ?
Thanks a lot.

Hi
I have already tried both of the options, but not working.
In fact, I couldnt get the PO qty in the MIRO by default still after setting the Indicator - GR Based IV - False, in one of the other issue also.
As far as DQ settings are concerned, they are confined to the MIRO - MIGO qty (If I am not wrong), but here the PO qty is in the question.
Kindly suggest
Sumit

Clearing GR/IR with Price Variance

Hi Friends,
1) We created a PO with Qty 1 and price $ 67.50.
2) First, GR was made and system calculated $ 67.50 as Moving Average Price.
3) Then Invoice was entered for $ 73.17.
4) For some reasons, GR was reversed. This time system calculated $ 73.17 as value, instead of 67.50.
5) Invoice is now reversed for $ 73.17
6) GR is again made 2nd time with value $ 67.50
7) Invoice is now entered again 2nd time with value $ 73.17
The Net GR value is now $ 61.83( 67.50 - 73.17 + 67.50) AND Net Invoice value is 73.17
When Invoice was posted, it cleared GR/IR for Net GR value of 61.83 and it posted another 11.34 for 'Office supplies GL account.
When we run MR11 to clear GR/IR, it does not clear the above 5.67 dollars ( It should have been 73.17 - 67.50 to get 5.67 dollars ).
My question is, Has system calculated correctly during last Invoice posting and there is no GR/IR balance ?
When we run FBL3N report for GR/IR clearing account, we see a balance of 5.67 and normally we would see 0 here.
Any help is appreciated.
Niranjan

1) We created a PO with Qty 1 and price $ 67.50.
2) First, GR was made and system calculated $ 67.50 as Moving Average Price.
3) Then Invoice was entered for $ 73.17.
4) For some reasons, GR was reversed. This time system calculated $ 73.17 as value, instead of 67.50.
*If you reverse the GR despite of Invoice is posted, it will pick the value of invoice but not the PO value.
In this case GR/IR will be debited 73.17 and stock/expense account will be credit with 73.17 (because in invoice stock/expense debited was 73.17)
So net debit on GR/IR will be 5.67 dollars
5) Invoice is now reversed for $ 73.17
6) GR is again made 2nd time with value $ 67.50
7) Invoice is now entered again 2nd time with value $ 73.17
In this case GR/IR debit will be 67.5 and stock/expense accoutn debit will be 73.17 (67.5 + 5.67directly)
So total debit on GR/IR will be 5.67dollars that you will see on GR/IR clearing GL account balance.
Thanks

Moving average price variance in Invoice verification

Hello,
I set in sys that the moving average of price variance will be check in tolerance of x% (lower & upper limit) BUT the system ignore it , when I save an Invoice (MIRO) with price that change the moving average price for more than X% the invoice was saved with no W/E massage . I set all massages that seams to be relevant with E but nothing was happened .
What is the way to set the system that in Invoice verification stage it will check the moving average price variance and give an alert or will not let the invoice to be post ???
Best Regards
Idit

Hi,
You can block Invoices using transaction code OMC0
(a) Use Tolerancy Key VP for your company code
(b) Fill-up Lower and Upper check tolerance limit %
When a stock posting line is created as a result of an invoice item, the system calculates the new moving average price that results from the posting. It compares the percentage variance of the new moving average price to the old price using the percentage tolerance limits defined.
Bye,
Muralidhara

Invoice Block due to price variance

Dear Friends,
In invoice verification I have configured invoice block for price variance (PP).
I have mentioned upper limit as 5%.
PO---100
GRN---100
Invoice---120
I have made this as warning message. I want this should not be open for payment before releasing in MRBR. After posting the document in MIRO it shows that invoice is blocked for payment. The payment bock indicator in payment tab in MIRO shows as "R"--Invoice verificatin.
But system allows this document for payment to be done both in f-58 & f-53.
So please tell me how to stop payment to be done before releasing it in MRBR.
Regards
R Panda

Hi
I think you may be missing some settings in FI, thats the reason it is allowing to pay the invoice whcih are blocked for payment.
Please check with your FI consultant
Thanks & Regards
Kishore

Invoice Block - Price Variance (PP)

Hi Folks,
I have a question in Invoice block for Price variance (PP)
I have maintained the following upper limits
Absolute
Check limit
Value - 5
Percentage
Check limit
5%
I am creating PO for 1MT with a price of 4,720 INR, i have done GR
Now Invoice price is 4,920 INR.
Since i have checked both absolute and percentage limit, i presumne it should check the lowest of the both.
In my case the lowest of the both is 4,725, however system is not blocking the invoice at 4,920.
Can you let me why this is not happening.
Regards,
Raghavendra

Hi Folks,
Request to provide inputs in this issue.
Thanks,
Regards
Raghavendra

Invoice Verification with price variance

Similar Messages

Maybe you are looking for