Invoice vs. Money Request as Goods - same protection for Buyer and Seller?

Please help settle a long-standing dispute: A Buyer is purchasing an Eligible Item (otherwise eligible for PayPal protection) from a Seller. All 3 methods listed below are valid methods to make payment and do not affect eligibility under PayPal's buyer or seller protection provisions. 1. Seller sends Buyer an Invoice2. Seller sends Buyer a Money Request as Goods3. Buyer sends funds directly to the Seller as Goods Please confirm that ALL three methods are eligible for paypal protection. In addition, as a best course, in ALL THREE methods, the Eligible Item should be described as thoroughly as possible. Thank you!

Yes.

Similar Messages

An unexpected error occurred processing your request. Check the logs for details and correct the problem.

Hi All,
I am configuring RSS Viewer webpart to SP 2013.
But i am getting an error "An unexpected error occurred processing your request. Check the logs for details and correct the problem."
I looked for solution of this error. i got to know, we need to set proxy server in web.config file.
So, in order to resolve this i put the following set of code in web.config and save the file
<system.net>
<defaultProxy>
<proxy usesystemdefault="True" proxyaddress="http://myproxyserver" bypassonlocal="True" />
</defaultProxy>
</system.net>
But, still i am getting the error.
What could be the problem now.
Any help is much appreciated.
Thanks,
Rakesh

Hi Rakesh,
According to your description, my understanding is that you got an error when you used RSS viewer web part in SharePoint 2013.
The RSS viewer web part uses authentication delegation and is using the current user's credentials to access the proxy. However, the RSS viewer only supports anonymous and Kerberos authentication. So if you are using NTLM authentication, the RSS viewer will
not be able to authenticate the user through the proxy. More information, please refer to the link:
http://kalsing.blogspot.com/2007/11/troubleshooting-rss-viewer-web-part.html
Also see:
http://blogs.technet.com/b/sharepointdse/archive/2007/04/13/fun-with-rss.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Lick on the icon in appstore which allows to gift an app or copy link , post to facebook etc does not open it stucks.Also same case for itunes and moreover when I play music in iTunes it

Itunes and appstore problems:
i have an iPhone 5 whenever I try to click on the icon in appstore which allows to gift an app or copy link , post to facebook etc does not open it stucks.Also same case for itunes and moreover when I play music in iTunes it stops ..start again stops and start again ..stops and does not play..so I am unable to make gift purchase and listen to the songs..are these bugs or what? help

ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"

Same BS for sender and receiver comms

Hey pals,
can we use same BS for sender and reciever communication channels?!!
-Esha

Hello Esha,
You have to you 2 BS
One from where u hav to pick the file and the other one where you want to post it.
what is a Business system? What is use of creating it
Business System have an entry in the SLD and Buiness Service do not.
Business Systems are used when you are sending data to and from an R3 system and can be of ABAP, JAVA and Third Party Types.
Business System is a logical representation of a Technical System.
Business Service is a abstract representation of a System. For instance, www.google.com have a several system working together and IPs of this machines change eventually. When we use a Business Services like google we reference a computer that we don't know the phisical implementation.
Thanks,
Satya
Edited by: SATYA KUMAR AKKARABOYANA on May 15, 2008 5:51 PM

Different segment in same document for leading and non-leading ledger

Hi,
Is it possible to have different segments derived in the same document for Leading and Non-leading ledgers.
Is there an exit where we can substitute the segment originally derived so as to update only in one particular ledger
Please suggest.

Thanks Alex for your response.
But would it be possible to update the segment only in one ledger, the other one carrying the default values coming from profit center?

Bug or feature: TableView.EditEvent - same type for value and row?

Just noticed (normally I don't care overly much about generics, they are my natural enemies : -) that the return type for both cell and row data is the same:
class EditEvent<T> {
    T getNewValue()
    T getOldValue()
    T getRowValue()
}old/new value is fine, but typically the row has another type, which most probably is completely unrelated, as f.i. in
TableView<Person> tableView = new TableView<Person>(persons);
TableColumn<String> firstName = new TableColumn<String>("First Name");
firstName.setProperty("firstName");
EventHandler<EditEvent<String>> nameEditHandler = new EventHandler<TableView.EditEvent<String>>() {
            @Override
            public void handle(TableView.EditEvent<String> e) {
// compile error
                Person p = (Person)e.getRowValue();
                String newValue = (String)e.getNewValue();
                p.setFirstName(newValue);
firstNameCol.setOnEditCommit(nameEditHandler);The compile error is due to the event requiring the same type for row and cell. Obviously, can remove all type parameters - but how to solve cleanly without getting unchecked/rawtype warnings?
Thanks
Jeanette

Good morning, Jonathan (my day time : -)
If you mean that big issue where you threaten (and locally actually already did) to remove all the niceties of auto-magic column binding via setting property names - yeah, I've read it, partly unhappily. But that's another story.
to create two separate EditEvents - one for row edits and one for cell edits.
hmm .. have been expecting something along the lines of
EditEvent<R, C> {
     R getRowValue();
     C getOldValue();
     C getNewValue();
// used in
TableView<R>
TableColumn<C>
// for row edits
R == C
getRowValue() == getOldValue()Musing a bit longer, the event could be streamlined a bit - remove all the convenience sugar: the receiver has to know the exact details of grabbing the data anyway in order to be able to change it (in the current workflow, it's not necessarily the way to go) so old/row is redundant
EditEvent<S> {
   <S> getEditValue();
}Cheers
Jeanette

Same SLD for dvlpmnt and prod servers??

Is it right to have same SLD for Development and Production servers??

Hello,
Is it right to have same SLD for Development and Production servers??
The answer actually depends on your requirements, you can refer to this thread for more information (see the reply of Bhavesh):
Re: Difference Between Central SLD & Local SLD
The approach we've taken is more like what Barry suggested in the thread.
Hope this helps,
Mark

I am currently receiving error message "Microsoft Excel quit unexpectedly". Any suggestions on how to fix? I notice same message for powerpoint and word.

I am currently receiving error message "Microsoft Excel quit unexpectedly". Any suggestions on how to fix? I notice same message for powerpoint and word.

That generally has to do with data corruption. Is your data backed up?
What version of Office do you have?
What Mac operating system?

Same thread for ServletRequestListener and Servlet request?

Does ServletRequestListener methods execute in the same thread that the Servlet.service method?
I wonder if the answer is always 'yes'. And I hope it will. I've been reading the specs but found nothing related.
I think it's an important issue because this way you can take advantage and share data between listener and request in a ThreadLocal object for a request.
Can anyone help me?
Thanks in advance.
Message was edited by:
pucherico

I've checked it up for Tomcat (version 5). I can say it is true for Tomcat: For a given request, the service method and request listeners are executed in the same thread. But who can say this is true for all Application Servers....! and who can say it will be true for future version of Tomcat!
Because of the lack in the spec (I haven't found any comment on this subject) I am still not sure if I can rely on this property!

Same dates for GA and GR in ATP

Hi All,
This is my very first post. I have a situation where for an Inbound delivery. I should have 2 days difference in Goods arrival and goods receipt in plant. For some reason system is showing the same dates for Goods arrival and goods Receipt. Can someone help me what all tolook for?
Many thanks
YS

ATO Items/ Models have significant complex requirements and behavior when ATP check is called. While this is handled appropriately in ATP from OM interface, direct ATP Inquiry either from APS responsibility or similar form in OM--> Scheduling menu option.
I'll highly suggest not to use either of these ATP Inquiry forms for anything related to CTO (ATO, PTO etc) and only use OM UI for such availability checks. This is by design unless Oracle makes significant changes to how these forms are built, please note there is no configurator support from these 2 forms for similar reasons.
Thanks
Navneet Goel

Can I use same account for android and PC and how ...

Can I use same account for android tablet and PC and how do I link both?

You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

How to use same jsp for edit and add form

Hi,
I would like to use the same .jsp file for edit and add. I just want to change a few controls based on edit/add mode. How do I configure this in the jsp?

In the environment I currently have access to do not have similar setup.
Let say you setup the DFF1 default value to $HEADER.customer_name, the name of the DFF is CUSTOMER_NAME, description can be anything.
In DFF2, default value should be a SQL, where you can reference the DFF1. For example, SELECT DECODE($FLEX.CUSTOMER_NAME, 'ABC', 1, 'DEF', 2, NULL) FROM dual
In this case, you can reference the DFF1.

Same Algo for Key and Cipher recommended?

Hi,
Can I use different algos for the key i want to use for a cipher and the cipher itself or
is it mandatory to use the same algo for both?
I don't found any answer for this simple question.
regards,
Olek

Olek wrote:
Hi,
No - but who said that this is complete sensless?If it made sense then there would be no need to create a SecretKey object for a particular algorithm. AES requires a 128 bit or 192 bit or 256 bit key so how can a 56 bit DES key be used with AES? Simple logic.
If using the JCE you had tried to use a DES key in AES then you would quickly have found out that an exception gets thrown in the init() method. A very simple 3 line test harness. This would have taken you no more than 5 minutes to cobble together. Much quicker than asking in this forum but ...
The Key and the Cipher are two independent things for a non
high skilled crypto veteran.What logic makes Key and Cipher independent? 1 minute of thought after 15 minutes with the most elementary cryptography tutorial would make you understand this.
I wouldn't aks if this is clear like 1 + 1 = 2 - is this clear!? ;)Obvious it is not clear but I do know that insecure and faulty cryptography results from people not studying cryptography. I do not mean that one must know all about all aspect of cryptography but one should have done significant background reading, especially with regards to the type of cryptography one is using.
How much background study have you done Olek?
>
Olek

Using same project for Desktop and Web (?)

Is it possible to manage a same codebase/project for compiling both for AIR and web release (?) Also, on a distant thinking, can ANT able to help on this way?

To elaborate further, in Flash Builder create:
Core Library : Actionscript Library Project - This project contains 90% of your code as CWBenccw mentioned.
AIR Core Library : ActionScript Library Project (Linking AIR libraries) - This project contains AIR-specific implementations of core functionality.
Web App: ActionScript Project (Web) - This project links with Core Library and contains a basic entry point for web (a Main Sprite)
Desktop App: ActionScript Project (Desktop) - This project works like the above, but with a Desktop entry point and Application descriptor, and links with AIR Core Library
Mobile App: ActionScript Mobile Project - Same as above, but for mobile
The way you use your AIR Core Library is to provide overrides for things that are different in AIR. For instance you might want to be able to save files differently, but transparaently to the Core Library. In this case you create an interface for saving in Core Library, e.g.
interface Saver
function save(filename:String, data:String) : void;
You also create an implementation for your non-AIR core:
class FlashSaver implements Saver
function save(filename:String, data:String) : void
     var so : SharedObject = SharedObject.getLocal("something");
     so.data[filename] = data;
     so.flush();
And then an AIR implementation that might use AIR features like direct File IO.
Your various entry points are responsible for providing the correct implementation of Saver to your Core Libraries via some form of dependency injection.

Dataguard 9iR2 using same SID for primary and physical standby issues

Hello, I have been following the Creating Physical Standby Database document from Oracle setting up a physical clone for a 9iR2 database on Solaris 9 environment between two identical workstations. I want to databases to have the same SID for relatively seemless failover however the redo logs are not pushed to the physical clone. when I switch a logfile on the primary and then query v$archive_dest on dest_id=2 I get a status of ERROR and the ERROR is the ORA-12154 TNS service name error.
Here is a summary of my setup:
Primary - SID = PROD1, located on WS001
Clone - SID = PROD1, located on WS002
SPFILE settings on Primary:
*.db_name='PROD1'
*.dg_broker_start=true
*.fal_client='PROD1_node2'
*.fal_server='PROD1_node1'
*.log_archive_dest_2='service=PROD1_node2 optional lgwr async=20480 noaffirm reopen=15 max_failure=10 delay=30 net_timeout=30'
tnsnames.ora on Primary:
PROD1_node2 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = WS002) (PORT = 1521))
(CONNECT_DATA =
(SID = PROD1)
listener.ora on secondary:
PROD1_node2 =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = WS002) (PORT = 1521))
SID_LIST_PROD1_node2 =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /export/oracle/oracle_9.2/PROD1)
(SID_NAME = PROD1)
Any input would be appreciated. I can provide whatever else you might need. I thought this was the most pertinent to this problem.
Thanks.
Jim

I have been looking at the sqlnet.ora files for the two databases
for WS001:
Names.Default_Domain = WS001.example.com
Names.Directory_Path = (TNSNAMES, ONAMES,HOSTNAME)
for WS002:
Names.Default_Domain = WS002.example.com
Names.Directory_Path = (TNSNAMES, ONAMES,HOSTNAME)
I cannot connect with sqlplus from WS001 to WS002 on the other machine.

Invoice vs. Money Request as Goods - same protection for Buyer and Seller?

Similar Messages

Maybe you are looking for