Invoiced quantity and invoice amount not updated in infosource 2LIS_02_SCL

HI,
I am facing one problem when i run the standard query 'Price trends in last three months' the vaue 'X' is coming in price column. When i analyzed i found in infosource 2LIS_02_SCL, invoiced qty and invoices amount is blank. These two fields are used in the above mentioned query. Why these two fields are not getting updated? Am i missing something?
Regards,
Manish

Hi Sadhu,
Thanks.
Yes, the material statistics group is updated.
The info structure is retrieving the amount but not the quantity.
This is the structure for invoiced quantity.
Rules for key fig.
Event                VD         Billing document
Update type          A          Cumulative updating
Unit                 01         Base unit of measure
Source table         MCVBRP
Source field name    FKIMG      Billed quantity
Source unit          03         Sales unit
Table for date       MCVBRK
Date field           FKDAT      Billing date
Rules for characteristic
Sales organization              MCVBRK     VKORG
Distribution channel            MCVBRK     VTWEG
Division                        MCVBRK     SPART
Sold-to party                   MCVBPA     KUNNR
Plant                           MCVBRP     WERKS
Material                        MCVBRP     MATNR
Product hierarchy               MCVBRP     PRODH
Batch                           MCVBRP     CHARG
Could it be possible that this is because the item is service and non-inventory?
Thanks so much.

Similar Messages

Excise Base amount not updated in J_1iexcdtl table -reg

Dear Gurus,
We have used SAP Ecc 5.0 Patch level 21. In patch level 20, SAP admit without delivery , can do commercial billing and excise billing in foreground. After batch update SAP not support excise invoice creation in foreground. It support only background. We have 2 senario. 1 is capex sales . ie. without material stock we have raise the comm.billing and excise billing. 2 is supplimentary billing. both the senario now getting effected because of no delivery. Asper SAP advise we have setting for background process excise invoice creation. Excise invoice created. but excise base amount not updated in j_1iexcdtl table. Using J_1I7_USEREXIT_CALC_EXC_BASE user exit we are trying to update the same. For single material it works fine. But more than one material for the first material's base amount is updated in all materials. for your reference i have mentioned the codding . SAP advise it is possible to update excise base amount. But not possible to do. pl.adivse if any correct or guide to solve it.
FUNCTION J_1I7_USEREXIT_CALC_EXC_BASE.
""Local Interface:
*" IMPORTING
*"     VALUE(EXCITM_BASE) TYPE KOMV-KAWRT
*"     VALUE(POSNR) TYPE VBRP-POSNR
*" EXPORTING
*"     VALUE(EXCITM_BASE) TYPE KOMV-KAWRT
*" TABLES
*"      KONV STRUCTURE KONV
*{   INSERT         RDSK925285                                        1
TABLES : KONV.
data :   W_INDEX LIKE SY-TABIX.
DATA :ITAB LIKE TABLE OF KONV WITH HEADER LINE.
DATA :ITAB1 LIKE TABLE OF KOmV WITH HEADER LINE.
ITAB1[] = KONV[].
DATA : BEGIN OF I_TAB OCCURS 0,
       KAWRT LIKE KONV-KAWRT,
       POSNR LIKE VBRP-POSNR,
       END OF I_TAB.
LOOP AT ITAB1.
READ TABLE ITAB1 WITH KEY KSCHL = 'JMOD' KPOSN = ITAB1-KPOSN.
IF SY-SUBRC EQ 0.
    EXCITM_BASE = ITAB1-KAWRT.
    POSNR = ITAB1-KPOSN.
ENDIF.
ENDLOOP.
*}   INSERT
ENDFUNCTION.
Thanks & Regards
R.Udayakumar

solved with the same user exit

Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values

Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank you

My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi

I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?

I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?

Hey there rmflint,
It sounds like you are wanting to update the Apps that were synced over from your computer to your new iPhone 5s. If you are clicking Updates in the App Store in the bottom right corner, would you mind clarifying what happens when you are trying to update them?
App Store at a glance
http://help.apple.com/iphone/7/#/iph3dfd8c19
Thank you for using Apple Support Communities.
Take care,
Sterling

I have a ipad 3 with ios 5.1.1 and it will not update to ios 7. I keep getting a software failed message and the download takes 13 hours and stops half way through. Any help?

I have an ipad 3rd gen with ios 5.1.1 and I can not update it to ios 7. It will take 13hours and when I try it stalls out halfway through and says software update failed. I have tried everything. Any help?

it actually needs more space than that. The file size is your 65 mb is probably the ota incremental file size. The full package is 700 mg, and the system needs 3 gig of free space to unpack and install.
There is a fairly good discussion here
https://discussions.apple.com/message/23680750#23680750

Job CLEAN_REQREQ_UP and BBP_GET_STATUS_2 does not update SC in SRM With PO

Hello,
We are on SRM 5.0 Classic scenario R3 SAP ECC 6.0. we recently had a stackupgrade for all our different components.
Aswe are in a classic scenario we get a prucahse requisition after a shopping cart is approved. The purchaser then creates a purchase order and the program BBP_GET_STATUS_2 and CLEAN_REQREQ_UP updates the shopping cart with the PO information.
For these 2 programmes we have created one Job. The problem that we now encounter is that the job doesn't update the Shopping cart with the PO information. Only the purchase reuiqisition is visisble. If i go to transaction BBP_PD for that shopping cart i see Item in transfer process marked red. From BBP_PD I can run BBP_GET_STATUS_2 and CLEAN_REQREQ_UP and the nthe shopping is updated.
So to summarize: The jobs (BBP_GET_STATUS_2 and CLEAN_REQREQ_UP ) do not update the shopping cart but running BBP_GET_STATUS_2 and CLEAN_REQREQ_UP manually the Shopping cart is updated.
The users who running the jobs seem to be ok.
Any idea ?
Thanks

Hi,
Check this.
In the backend system, you activate the application SRMNTY in table TBE11 using transaction FIBF so that the purchase order follow-on data is transferred from the SAP backend to the SRM system. In this way, the SRM system is notified when follow-on documents are created in the backend system.
Check teh variant, Check if the Backend system has been changed, Run BDLS if changed
regards,
MRao
Edited by: Mahesh Rao T.C on Oct 14, 2010 12:31 PM

I downloaded an Adobe plug in and it will not update my computer even after a restart.

I downloaded an Adobe plug in and it will not update in my computer even after a restart. Any ideas?

to do an up-date you will need the original app. Then you can up-date

HT4061 My phone says it needs to connect to iTunes. I do this and it will not update or restore factory settings.

My phone says it needs to connect to iTunes. I do this and it will not update or restore factory settings?

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

I deleted all Apps on iPad as they were associated with an out of date Apple ID and I could not update them, but the "App Store" logo still shows that there are 2 to be updated and when I go there I cannot delete. Please assist. Thanks.

I deleted all Apps on iPad as they were associated with an out of date Apple ID (which I have forgotten the password) and I could not update them, but the "App Store" logo still shows that there are 2 to be updated and when I go there I cannot delete. Please assist. Thanks.

Why don't you explain what happens when you try to delete these two apps that are showing that they need updates. You can only delete them if they are actually installEd on the iPad. Are they on the device?

I have a iphone 3gs and it will not update to the IOS 5.1.1

I have a iphone 3gs and it will not update. I have tried going to settings and it doesnt even show up the software button to check and see if I can update. I have also tried on itunes to see if i will update and all it says is "the version iphone software (4.2.1) is the current version"
any ideas to help?

Post the model number. You probably have an iPhone 3G.

HT4972 Why Pages and numbers are not updating.

My pages and numbers are not updating for about a week now Why?

Some one else had a similar problem last night...same as yours. He claimed that Pages had been stuck trying to update for about week. I posted this and he said that it worked - which part he did not say - but give these things a try.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to resume the download.
If you have all of your Pages files backed up in iTunes or on your Mac, this might be the answer. Try deleting the waiting icon - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
I have deleted Pages a couple of times when I had issues with it and then reinstalled it. I even deleted a stalled Pages once and then tried the update successfully again after that. My files are always backed up in iTunes and on my Mac so I had no apprehension about deleting the waiting download.

Iphone 4 in recovery mode when trying to update to ios and I will not update it because I don't want to lose my information

Iphone 4 in recovery mode when trying to update it to the last version and I will not update it because I don't want to lose my information
my operating system is the before last one

Open iTunes. plug in your iPhone to the usb-port while holding the home button pressed. Your bricked phone should now show up in iTunes.

Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014

Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014
this cause to "cant create ActiveX object" error in VB Scripts
win7 x64, ps cc 2014 x64
any ideas? thnks

All I can so is show you what I see in that area of my Windows 7 registry but I have CS2, CS6 32, CS6 64, CC 32, CC 64 and CC 2014 64 installed. 6 versions yet there seem to be 9 Photoshop Application dot keys.
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Photoshop.Application]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application\CLSID]
@="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
[HKEY_CLASSES_ROOT\Photoshop.Application\CurVer]
@="Photoshop.Application.80"
[HKEY_CLASSES_ROOT\Photoshop.Application.60]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.60\CLSID]
@="{99aea70e-4d13-44bf-a878-33345cbfcbc8}"
[HKEY_CLASSES_ROOT\Photoshop.Application.60.1]
@="Photoshop CS6 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.60.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.70]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.70\CLSID]
@="{951ec38c-3de6-4bb8-8246-adf182e6421d}"
[HKEY_CLASSES_ROOT\Photoshop.Application.70.1]
@="Photoshop CC Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.70.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.80]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.80\CLSID]
@="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
[HKEY_CLASSES_ROOT\Photoshop.Application.80.1]
@="Photoshop CC 2014 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.80.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.9]
@="Photoshop CS2 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.9\CLSID]
@="{16aa0b9e-79ac-43b5-86ca-ab961fbeed5f}"
[HKEY_CLASSES_ROOT\Photoshop.Application.9.1]
@="Photoshop CS2 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.9.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"

Just installed Photoshop CC and it will not update

Just installed CC on a new machine and it will not update, says failed with a 49 at the end of the message, tried restarting and that did not help. Did get lightroom to install and update without any problems.

Hi scottbreum,
Please go through the thread link , http://forums.adobe.com/message/5775939
In case it does not resolve, please do contact Adobe Support. http://adobe.ly/yxj0t6
Regards,
Rajshree

IMovie and IPhoto will not update.

IMovie and IPhoto will not update. Giving me "There was an error in the App Store. Please try again later. (18)." I have OS X version 10.8.5 and my IPHOTO is 9.4.3
Has not updated correctly for months.

Be patient. Apple's servers are currently inundated. Try again later or tomorrow.

Invoiced quantity and invoice amount not updated in infosource 2LIS_02_SCL

Similar Messages

Maybe you are looking for