INVOICES WAITING FOR APPROVAL

Hi,
i have to find all the invoice documents which are wainting for approval from the user
please kindly give the tables and fields corresponding to this issue.
aftrer  finding those documents i have to go to the transaction CV02N and print the
document. for this if any function module exists then please inform
regards
sami
Message was edited by:
        sami sami

vbuk- lfstk absta
vbup- lssta absta

Similar Messages

  • Purchase requisition waiting for approval

    Hi ,
    Can you please tel me a table name where i can see a PRs waiting for approval for particular user.
    Like , when we  see PRs  in ME55 tcode for particular user. From which table we get these entries??
    Much thanks in advance.,
    Nilesh.

    EBAN you get the exact level. but thing is here you can get the rel stat as X only.
    Say examply if you have 3 rel level means, in this rel stat each level release it will get update X. If two level released XX will be there.
    Create one Z table there you will maintain the release code,user and level combination. two compare this z table and eban you can get the user list.
    directly you cannot get the its lying with which user.

  • " Waiting for approval " until when !????

    Hi
     i have a nokia N8 with the following product code 059D1M2 im always checking for the update realase , now its been a month evryday i check the updates availability i find " Waiting for approval"  is nokia joking on us or  what !!?

    It means that it's waiting for approval from your operator and it has nothing to do with Nokia.
    You could call your operator and ask about this approval, someone in technical service may know that how long it takes to approve the newest firmware. (For some reason, every operator has to approve the firmware updates and only after that their clients can do the update)

  • Header status say "waiting for approval".

    Hello Team,
    We have contract with 10 line items. All line items are approved. ie the status say approval finished.
    However in the header status say "waiting for approval".
    We have approval at header level.
    System details we have SRM 7.01 ie Ehp 1.
    Thanks in advance.
    With Regards
    Divakar V

    Hi,
    Check in IMG >>>> "Check Event Type Linkage" check whether "linkage enabled" got unchecked or not.
    Ganapathi

  • Waiting for Approval - RFx Question

    Hi Experts,
    We are in Esourcing 7.0. My Client has a requirement to add spend category group as approver for RFx before it go to next phase 'Open for Review'.
    I modified the document security template for RFx and provided the group information.
    Added them as Colloboraters - Role (Approver)
    When I changed the phase to 'Waiting for approval'. I dont see any approval item in the workbench (My Workflow Activities)...
    But when I click on the link(that I received in email as colloborator) , I can view a button 'Approve RFx'.
    Is there something I am missing?
    Will 'My Workflow Activities' only shows that are routed through XPDL  (Project and Contract Document)?
    Thanks,

    Rfx approval is not supported by workflow.  It is a separate process.  As you stated Projects, Contract Documents, UserDefined objects and recently Vendors are supported workflow documents.  The way you can tell is objects that have configurable phase definitions also have the ability to add workflow. These will show up in the workflow activities report.

  • Waiting for approval for unbranded phones

    In the Software Update for Nokia Lumia with Windows Phone page, some phones has the status "Waiting for approval". Far as I know, carrier specific phones updates are tested/aproved by the carrier.
    But, the unbranded ones: who makes the tests and approves the update? Is Nokia itself?

    Both would as regards to the carriers they will test it themselves,often the maybe they skip updates,thats why sim free is the best option,or so one would think because the carriers are getting the updates first with the lumias.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Non PO invoices sent for Approval - getting error message - Tax Jurisdictio

    Hi Experts,
    Our clients have just upgraded from SAP 4.6C to ECC 6.0 and when the Non -PO invoices are sent for approval the user is getting the below error message.
    'Specify a tax jurisdiction key' - Message no. F5566
    Could any one suggest what the reson could be.
    Answers would be suitably rewarded.
    Thanks in advance,
    Manish Singhi
    E- [email protected]

    Hi,
    Can anyone suggest on this.
    Thanks,
    Manish

  • Waiting for approval from other device on mac

    Im waiting for the macs keychain access to send approval to one of my other devices for approval after a fresh installation of mavericks 10.9.3,
    my question is how long should it take because its been 3 hours so far.
    it doesnt appear to be working for me

    Hello pj o\'connell,
    Thanks for using Apple Support Communities.
    Please see below for instructions on troubleshooting this issue of not receiving the verification code:
    I'm not receiving the verification code via SMS.
    Make sure that you have a good cellular network connection on your phone.
    Check that your phone number is one that can receive SMS messages. You can do this by having someone send you a text message.
    Check that you have the correct phone number associated with your account:
    Devices using iOS 7.0.3 or later: Tap Settings > iCloud > Account, then tap Keychain. Check that the phone number listed under Verification Number is correct. If not, enter another phone number.
    Macs using OS X Mavericks v10.9 or later: Choose Apple () menu > System Preferences. Click iCloud, then click Account Details. Check that the phone number listed under Verification number is correct. If not, enter another phone number.
    Check Apple System Status to see if there is currently a service outage affecting iCloud Keychain.
    If you do not have access to a device that has iCloud Keychain enabled, you can contact Apple Support and verify your identity for help completing iCloud Keychain setup.
    iCloud: Troubleshooting iCloud Keychain
    http://support.apple.com/kb/TS4644
    Take care,
    Alex H.

  • How many days have you waited for approval?

    I have waited for 10 days. Still "Not on 32 stores" status for all the books I uploaded.
    How many days have you waited before you get your books approved? Does the status ever changed to say "Under Review"? Will you received an email when your book get approved?
    Thanks!

    OK, I finally have 1 book - out of 8 submitted approved. So I finally have answers to my questions - hope it help others too!
    How many days have you waited before you get your books approved?
    - in this case, about 11 days. Would say 2 weeks is a good bet.
    Does the status ever changed to say "Under Review"?
    - no. It just turned the red ligh to green, and show "On 32 stores".
    Will you received an email when your book get approved?
    - no.
    Now I still looking for the answer of: can the book get updated once approved? I just submitted a major revision (and grow the book from 70+ pages to 100+ pages) and see whether this will get updated. It goes through fine in iTunes Producer.

  • Waiting for approval item does not execute attached procedure !

    Hi.
    Using 3.0.8 on Solaris.
    Create one custom item type and associate one on plsql procedure to be run in place when item is listed within its folder.
    Go to folder, add item, look for the plsql result : Good it's working !
    After that create an item as a create with approval ACL and come back as folder owner, look at the plsql result : NOTHING !!!
    My PLSQL procedure is displaying some attributs in order for the folder owner to approve or not the waiting item. So if wainting for approval items does not execute associated plsql function as they are "waiting" (active=0) then I've got some problems!
    Any suggestions ?

    Hi all,
    Thanks very much for your feedback.
    In reply to Brian's suggestions
    1. I checked to see if WS14500013 was defined as general task; it was not and this has has now been rectified. Went through the other workflows also.
    Double checked the contents of the tables:
    APPROVAL_TABLE, ITEM_APPROVAL_TABLE, ITEM_APPROVAL_OBJECT.
    All appeared OK.
    Created a simple one line SC. Invoked approval preview and the message: 'Approval step without ad-hoc capability. No preview possible' was displayed. This is odd since WS14500015 and sub-workflows do not use AD-HOC approval. Or am I not understanding this correctly.
    Followed Smitas suggestions but to no effect.
    Here are the contents of the said tables which I lifted from the workflow tables:
    Again, many thanks for your responses...
    **APPROVAL_TABLE****
    NAME="APPROVERLIST:ApproverList:"   <APPROVAL_INDEX>0000000001</APPROVAL_INDEX>
    <APPROVAL_BRANCH>0000000001
    <APPROVAL_AGENT>USMGRR11000 
    <APPROVAL_STATE>0000000002 
    <INITIAL_AGENT>USMGRR11000
    <INITIAL_INDEX>0000000002
    **ITEM_APPROVAL_OBJECT***.
    NAME="ITEMAPPOBJTABLE:ItemAppObjTable:" - <item>
      <SC_GUID>957117374BC6434882B0BFD5462A2724</SC_GUID>
      <APP_CRIT_NAME1>COST_CTR</APP_CRIT_NAME1>
      <APP_CRIT_NAME2>ORDER_NO</APP_CRIT_NAME2>
      <APP_CRIT_NAME3 />
      <APP_CRIT_VALUE1>R11000</APP_CRIT_VALUE1>
      <APP_CRIT_VALUE2 />
      <APP_CRIT_VALUE3 />
      <APPROVAL_OBJECT_GUID>9E6EFAC500B681458284BBB60BF99C8A
    *****ITEM_APPROVAL_TABLE***,
    NAME="APPROVALITEMLIST:ApprovalItemList:"
    <item>
    <APPROVAL_OBJECT_GUID>9E6EFAC500B681458284BBB60BF99C8A  <APPROVAL_ITEM_GUID>1137519335F51C4DB3D2844A8AD484C0

  • PO Waiting for Approval

    Hello SRM Gurus,
    I am working on a Standalone,
    I have created a SC and a PO for the same using Sourcing.
    Few Questions
    1.Can i create a PO from SC without using the Sourcing Application?
    I have Maintained the Vendor and Price in Product Master(commpr01)
    Can this be done with the Vendor list.?
    When i tried maintaing the Vendor list using "Process Vendor List"what is the entry "Release Authorized Purchasing Org"?
    2.The above created PO is showing as awaiting approval ,even i have not activated any Approval process for PO.what can i check in OOCU for this and deactivate the PO approval process.
    When i tried creating a POR for the PO it displays error message "the document is not in the sent state..."
    How do i do this.
    Full points promised..
    Thanks
    Arshad

    1. You have the option of auto PO after approval of SC provided
    SC is complete & you have deactivated sourcing.
    As per me you can not maintain price in vendor list.
    When you create external BP (vendor) in SRM, you maintain PORG in vendor tab.
    this is same as assigning vendor to PORG in ECC.
    Same you can input in vendor list.
    2. go to SWB_COND
    you can find the start conditions for approval WF there.
    Search for WF for BO BUS 2201 (PO)
    some approval WF would be activated. Switch off that
    and switch on auto approval WF
    BR
    Dinesh

  • Waiting for approval email during sign up procedure

    We are waiting for the return mail before we can download Publisher. We have waited 48 hours now. Is the only option to wait? is it possible to contact any? /Jesper

    Hi Frustrated4ever,
    If you had accessed Adobe related services previously with the old email it may be pulling the information for that account from browser cookie info stored on your system. An easy way to clear this out is to use the Cleaner Tool, within the tool is an option to remove Adobe ID info.
    Here is a link to the tool:
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    Here is a screen shot of the option:
    - Dave

  • Agents of a PCR waiting for Approval

    Hi All,
    I have a PCR that is Waitiing for Approval. How can i find agents for this PCR ?
    I have the PCR number.
    Any hints ????
    Regards,
    Radhika.

    You are right.  What I missed was the status local being set to True after the DAQ read.  This stops the inner loop.  I assume that you are expecting the inner loop to run many times before the outer one is done, therefore you can see a running total of the samples being acquired.  But it doesn't work because the DAQ is being tied up by the read, so the property node does not get updated until the read is done.  I'm afraid this will happen with any property node.
    I was thinking that if you could modify the DAQ read vi, and put code there to send a running count as it is happening.  However, the DAQ read vi is nothing more than a DLL function call.  I do not see any way possible to have a running total, except to modify the DLL function itself.  Without the source code, it won't happen.
    So what I did was break the DAQ read into several chunks.  If wanting to read 1000 samples, I created a loop to read 10 samples only, and read them 10 times.  This results in reading 1000 samples.  By putting the DAQ read into a loop, the property node has time to update.  The loop timing is critical.  The delay time in the read loop must be larger than that of the property node loop.  Here is the main loop.  I have attached the whole vi (LV2009), but I had to make some changes in the sequence to make it run on my system, so don't use that part.
    - tbob
    Inventor of the WORM Global
    Attachments:
    triggercheck[1].vi ‏410 KB

  • Create a A/P Invoice Draft for approval

    Hello Experts,
    I want to create a A/P Invoice-Draft via Purchasing module,when clicking The Add Button the invoice is directly posted to the G\L without create a draft that other user who have permissions can view and approval via the Approval Decision Report.
    Please Tell me what is wrong...
    Thanks.
    Ben

    Hi
    I am not sure about your  problem.It looks to me that your approval query is not triggered .
    There could be th reason:
    1.If you are using user defined query ,and you are not meeting the condition to trigger.
    2. For example : If you said  Trigger approval procedures if sales order total is greater than 200.
         It won't trigger approval procedures if sales Order total is less than 200. And User can add the document .
    When Approval Procedures triggers, then the document that triggers  stays as a draft  until it is approved .
    One quick way to check if it not your query , on the condition  specify always .(Approval template >> term >> always . See if it creates the same situation .
    Hope this helps to narrow down your problems .
    Thank you
    Bishal
    Edited by: BIshal Adhikari on Dec 10, 2008 4:18 PM
    Edited by: BIshal Adhikari on Dec 10, 2008 4:39 PM

  • Can I close iBooks Author while I wait for approval for account to get iTunes Producer?

    I am new to the IBooks Author and I am awaiting approval, but I want to be able to close window. If I do will I be able to get back to the same area I left off when I get the confirmation?

    IBooks Author is used to create your books and needs no "registration" or approval...so yes you can closr it.
    iTunes Producer is used to upload your book to the review team and eventually into the iBooks store.
    Unless you have either a free noks account or a psid books account, you will not need to bother too much about iTunes Producer.
    Have you applied for a free book or psid book account yet?

Maybe you are looking for