Invoicing party display made through OMRMB not working

Dear Experts,
We have made the field RBKP-LIFNR invoicing party display only through OMRMB, but it is not working when you running MIRO.
The field is still input only and the invoicing party can be changed at MIRO, what could be reason of not working.
Client wants that field to be display only in MIRO.
rgds

is there any way if I can attach or modify one existing screen variant to standard transaction miro...since I do not want to change the tcode, this I have asked since omrmb is not working so only transaction variant is the way..
Kindly suggest.
rgds

Similar Messages

Equium A300D - Toshiba ATI display driver upgrade is not working

Hi
Has anybody else found the Equium A300D PSAK2E Windows Vista 32 bit Toshiba ATI display driver download will not work from the download centre? If you choose run, the download causes the windows explorer to crash during the install and the upgrade fails, the same with save and the install does not self install.
I have been trying to get the TV out S-Video port working. See thread on TV out not working. I have tried everything. has anybody else got this problem as Toshiba are unaware of any problems with the S Video TV out not working on this machine.
Thanks Vince

Hi,
The down load downloads ok but when you try and unzip it, then install it halfay through you get an error message stating windows explorer has stopped working and it has crashed. The Graphic card then will not work. I have tried uninstalling all the ATI software and deleting the left over files but it still wont install.
I have downloaded the programme from the ATI site and this installed ok and the graphic card is working. The s video tv port still will not work.
I have gone into great detail on the post regarding the TV out not working about what i have done. When the s video lead is connected the computer can see the tv but will not output, when you try and enable the display the display will not enable. I have used the FN f5 key with no success, changed settings on the avi controller and display settings in the control panel
I will take the machine back to where i bought it from next week and see if they can get it to work!

Saved Shopping Cart Display/Edit functions are not working

Hello SRM experts,
The problem that I have is that the buttons like Display, Edit, etc are not working on a saved Shopping Cart. What is the best way to debug this problem? How would I find out what methods are being called on the SRM system or if some entries are missing in some table for BUS2121?
We are on SRM 7.0 PPS SPS 5, Portal 7.01 SPS 5.0.
Thanks,
Mani

Hi Mani,
We are also facing a similar issue. Our protocol is HTTP throughout but still the issue persists.
Can you shed some light on any other config that you changed?
Regards,
Nikhil

External display monitor suddenly is not working; power is on

Hello,
My LG external monitor display suddenly is not working today. It powers on, and it says "analog power saving mode", and it is detected by my ibook G4. When I go to preferences, and show displays, it shows that two displays are active, my laptop "Color LCD" and my external, "L1932Tq". If the external is plugged in, it indicates that that is the system in use, though the external monitor is black and unresponding (except for power light which is on). I replaced all cords - the power cord and the mini VGA cord and it's connecting cord to the monitor, and there are no changes.
Is this monitor just suddenly broken, perhaps through it's internal connection devices??
Thanks!!
alidocs

Dear Shankar,
Issue is solved. It was Program Error from SAP side.
Now All the buttons are working fine and I am able to print PDF also.
Solution is implement the note 2031585 - SAP NWBC ABAP Runtime Patch 40.
System Details : ECC 6.0 NetWeiver 7.4 ,
EHP 7 , SP-Level 06
Thanks a lot for all your suggestions.
Regards,
Namsheed.

Mini display port to DVI not working

The mini display port of my late 2009 27" iMac is not working with DVI. Using the same monitor, DVI cable, and mini display to DVI adapter, I can connect my Air with no problems. So the monitor, adapter, and cable are fine. I can also connect my iMac to the same monitor using a VGA cable and a mini display to VGA adapter. So the problem clearly seems to be with my iMac. Has anyone had similar problems? Any advice? I think the image quality of DVI is substantially better than VGA so I really would like to get this working. But I don't think the difference is worth carrying my 27" monster into the Apple Store. I could buy a mini display to HDMI adapter, but I would rather not buy yet another adapter (I think I have about 15 already with my various idevices) - and it might not work either. The DVI setup is simple and really should be working. I bought a monitor and also a HD TV with DVI ports specifically for this. Thanks.

Hello,
Using the VGA connector, what resolution is set on the Monitor?
Is there any input choices on the Monitor for port or source?

Mini Display port DVI adapter not working on Thunderbolt Port

For some time I've been using a mini display port to DVI adapter on an slightly older MBP to connect to my HD TV. I recently purchased a MBP with a Thunderbolt port and when I try to connect it to my TV via my mini-display-port-DVI adapter things are not working properly. The MBP is seeing the Philips TV but it isn't listing all the display modes and I'm not able to send any video to it. Does the Thunderbolt port require a new display port to DVI adapter?

Let me be clearer; I've got the MDP-DVI adapter connected to a cable that is DVI on one end and HDMI on the other. I've got both laptops so I can compare side by side. I plug in the MDP-DVI adapter to the old laptop and all works well; I plug it into the new laptop and while the laptop does see the TV, the display modes for it are all 1080p which is wrong I don't see any desktop image on the TV unlike when I plug it into the older laptop. This is very disappointing as I expect things to just work with Apple products.

Image display control scrolling does not work properly when zoomed in

I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
Has anyone noticed this behaviour, and what would be a reliable solution to avoid this?
Dirk

Hello,
no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
I have attached a VI for simplicity (although there is hardly any code in it).
If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position.
I think it is a bug in the implementation of the image display control.
Thanks,
Dirk
Attachments:
scrolling.vi ‏818 KB

Third-Party USB to Ethernet Adapter not working since 10.8 updated

Hi I have a third-party USB to Ethernet adapter. Since the update of mountain lion the adapter does not work.
Is there a driver or something I can do to make it work?
Thanks

USB not so good, this very good.
Thunderbolt to Gigabit Ethernet Adapter

Backup scheduled through DB13 not working

Hello,
We are trying to schedule backup through DB13.But it got failed due to below error.Backup scheduled through DB13 was working fine last week.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000174, user ID KHJS199)
Execute logical command BRARCHIVE On host ppd-ora-ga2
Parameters:-u / -jid LOG__20100927040000 -c force -p initGA2.sap -sd
External communication error at program start (see system log)
SAPXPG_START_XPG_LONG: sy-subrc ne 0
destination = SAPXPG_DBDEST_PPD-ORA-GA2
SXPG_STEP_XPG_START: execute_sapxpg: rc = 1.003
SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1.003
SXPG_COMMAND_EXECUTE(LONG)
<timestamp> = 20101014040033
COMMANDNAME = BRARCHIVE
ADDITIONAL_PARAMETERS =
-u / -jid LOG__20100927040000 -c force -p initGA2.
sap -sd
LONG_PARAMS
OPERATINGSYSTEM = ANYOS
TARGETSYSTEM = ppd-ora-ga2
DESTINATION = SAPXPG_DBDEST_PPD-ORA-GA2
SY-SUBRC = 1003
SXPG_COMMAND_EXECUTE failed for BRARCHIVE - Reason: program_start_error: For More Information, See SYS
Job cancelled after system exception ERROR_MESSAGE
We checked the RFC connection SAPXPG_DBDEST_PPD-ORA-GA2 and it is not working.
For target host and gateway host,we have maintained their corresponding virtual host.
Gateway is already installed on the server.
Could you please help me out on this.
Thanks,
Gopi L

Hello,
Just to add some more information.
We have 3 servers, X(Database + CI),Y(Dialog instance),Z(Dialog Instance).
Server X is the primary node and Y is the failover node.
Gateway is already installed on Database server and I can verify it by giving ps -aef | grep gwrd.
Thanks,
Gopi L

Adding and displaying a new JPanel -- not working as expected

I'm starting my own new thread that is based on a problem discussed in another person's thread that can be found here in the New to Java forum titled "ActionListener:
http://forum.java.sun.com/thread.jspa?threadID=5207301
What I want to do: press a button which adds a new panel into another panel (the parentPane), and display the changes. The Actionlistener-derived class (AddPaneAction) for the button is in it's own file (it's not an internal class), and I pass a reference to the parentPane in the AddPaneAction's constructor as a parameter argument.
What works: After the button is clicked the AddPaneAction's actionPerformed method is called without problem.
What doesn't work: The new JPanel (called bluePanel) is not displayed as I thought it would be after I call
        parentPane.revalidate(); // this doesn't work
        parentPane.repaint();
What also doesn't work: So I obtained a reference to the main app's JFrame (I called it myFrame) by recursively calling component.getParent( ), no problem there, and then tried (and failed to show the bluePanel with) this:
        myFrame.invalidate(); // I tried this with and without calling this method here
        myFrame.validate(); // I tried this with and without calling this method here
        myFrame.repaint();
What finally works but confuses me: I got it to work but only after calling this:
        myFrame.pack();
        myFrame.repaint();But I didn't think that I needed to call pack to display the panel. So, what am I doing wrong? Why are my expectations not correct? Here's my complete code/SSCCE below. Many thanks in advance.
Pete
The ParentPane class:
import java.awt.BorderLayout;
import java.awt.Color;
import javax.swing.BorderFactory;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
public class ParentPane extends JPanel
    private JButton addPaneBtn = new JButton("Add new Pane");
    public ParentPane()
        super();
        setLayout(new BorderLayout());
        setBorder(BorderFactory.createEmptyBorder(5, 5, 5, 5));
        setBackground(Color.yellow);
        JPanel northPane = new JPanel();
        northPane.setBorder(BorderFactory.createEmptyBorder(5, 5, 5, 5));
        northPane.setBackground(Color.yellow);
        northPane.add(addPaneBtn);
        add(northPane, BorderLayout.NORTH);
        // add our actionlistener object and pass it a reference
        // to the main class which happens to be a JPanel (this)
        addPaneBtn.addActionListener(new AddPaneAction(this));
    public static void main(String[] args)
        javax.swing.SwingUtilities.invokeLater(new Runnable()
            public void run()
                createAndShowGUI();
    private static void createAndShowGUI()
        JFrame frame = new JFrame("test add panel");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.getContentPane().add(new ParentPane());
        frame.pack();
        frame.setVisible(true);
} the AddPaneAction class:
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Component;
import java.awt.Dimension;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.SwingConstants;
public class AddPaneAction implements ActionListener
    private JPanel parentPane;
    private JFrame myFrame;
    public AddPaneAction(JPanel parentPane)
        this.parentPane = parentPane;
     * recursively get the JFrame that holds the parentPane panel.
    private JFrame getJFrame(Component comp)
        Component parentComponent = comp.getParent();
        if (parentComponent instanceof JFrame)
            return (JFrame)parentComponent;
        else
            return getJFrame(parentComponent);
    public void actionPerformed(ActionEvent arg0)
        JPanel bluePanel = new JPanel(new BorderLayout());
        bluePanel.setBackground(Color.blue);
        bluePanel.setPreferredSize(new Dimension(400, 300));
        JLabel myLabel = new JLabel("blue panel label");
        myLabel.setForeground(Color.LIGHT_GRAY);
        myLabel.setVerticalAlignment(SwingConstants.CENTER);
        myLabel.setHorizontalAlignment(SwingConstants.CENTER);
        bluePanel.add(myLabel, BorderLayout.CENTER);
        parentPane.add(bluePanel);
        myFrame = getJFrame(parentPane);
        //parentPane.revalidate(); // this doesn't work
        //parentPane.repaint();
        //myFrame.invalidate(); // and also this doesn't work
        //myFrame.validate();
        //myFrame.repaint();
        myFrame.pack(); // but this does!?
        myFrame.repaint();
}

For me (as it happens I'm using JDK 1.5.0_04) your code appears to work fine.
It may be that we're seeing the same thing but interpreting it differently.
1. When I run your application with your "working" code, and press the button then the JFrame resizes and the blue area appears.
2. When I run your application with your "not working" code and press the button then the JFrame does not resize. If I manually resize it then the blue area is there.
3. When I run your application with your "not working" code, resize it first and then press the button then the JFrame then the blue area is there.
I interpret all of this as correct behaviour.
Is this what you are seeing too?
Are you expecting revalidate, repaint, invalidate or validate to resize your JFrame? I do not.
As an aside, I do remember having problems with this kind of thing in earlier JVMs (e.g. various 1.2 and 1.3), but I haven't used it enough recently to know if your code would manifest one of the previous problems or not. Also I don't know if they've fixed any stuff in this area.

Trying to do 6.3 raw update for CS5 through Bridge not working

Been trying to update 6.3 raw for CS5 through Bridge and a pop up window says I am not the administrator for my computer. I sign in as the admin still does not work. I have tried installing in manual mode no luck either.

If you are working on Windows OS, then try to run the patch executable in Admin mode using "RunAsAdministrator" option in the right click context menu.

Ipad display issue - replaced still not working

I replaced a LCD display on iPad 1 thinking it was bad. Turned this unit on and it is still not working. Tried the display on another iPad and it works fine so I know it is not the LCD. The ipad in questions is recognized in iTunes. Backlight doesn't come one

There is obviously a hardware problem and doubtful if anyone here will know what that is.

Drill Through does not work if clicked from email attachment

Hello,
Drill through when clicked from the report attached in the email, takes me to the home folder in the Report Server. That's the <URL Root> setup in the Reporting Services. I checked the solutions, but those don't work for me. One of them said to use
'Go To URL' in the 'Action' property of the text box, but JavaScript is not recognized when I tried to enter '="javascript:void(window.open('http://.........." Please help.
Thanks,
jkrish

Hi jkrish,
Based on your description, are experiencing the issue when you click in the report which will link you to the home folder of the Report Server and the report was attached to an email, You adding the URL like this: ="javascript:void(window.open('http://..........”)"
which doesn’t work in the email’s report, right?
I have tested on my local environment and can reproduce your problem in the email’s report, but it is fine in the report server ,the problem due to the JavaScript protocol can work only with an exact page. So, when you try to open an blank page to enter
the URL it will not work.
You can find more details steps to check the issue:
Open a blank Internet Explorer, type the following URL in the address box:
javascript:void(window.open('http://www.microsoft.com', '_blank'))
The URL can’t work fine.
Open a page such as :www.microsoft.com, and then replace the URL with the following URL:
javascript:void(window.open('http://www.microsoft.com', '_blank')
At this time, the Internet Explorer will open the home page of Microsoft.com in a new window. It means we can use the URL in Reporting Service well but can’t work in the email attached report.
If your SQL Server version is 2008 R2 or Higher you can Using this expressions in the “GO To URL”:
Expression: =IIF(Globals!RenderFormat.IsInteractive = true, "javascript:void(window.open('http://www.microsoft.com', '_blank'))", "http://www.microsoft.com")
This mean if you run the report in Report Server and click the link, you will open the URL using : "javascript:void(window.open('http://www.microsoft.com', '_blank'))",otherwise it will using this URL: "http://www.microsoft.com")
If the version is lower than 2008 R2 and will not support the “RenderFormat.IsInteractive = ”, you can add directly the URL (Example:=”Http://<ServerName>/ReportServer” ) in the “Go To URL” to make it work fine in the email attached report.
Similar thread for your reference:
SSRS 2005 Jump to URL javascript:void window.open fails in
Excel 2003
If you still have any question, please feel free to ask.
Regards
Vicky Liu

3rd Party FTP, all Widgets are NOT working!

Hello Community and Devs
Ive got problems with uploading my muse site to and external hoster. None of my widgets are working correctly! There are the Menuwidget where the drop down is not working, the Slideshow under the menu, and the quotes wdget at the footer.
Ive tried to upload with MUSE and also with filezilla and smartftp. I googled a bit about that issue and some say that maybe every file is correctly uploaded because of permission, but if i compare the folder on my computer and the one ive uploaded to ftp-server, those are the same!
Anyone know whats wrong?!
www.ulysseshuber.ch
uhuber.businesscatalyst.com
Marc

Hi Ulysses,
Currently, Muse requires PHP version 5.1 for dynamic Synchronized Text support.
There's a forum thread here about how to check for PHP compatibility on your server: https://forums.adobe.com/thread/1307217
There's also a PHP FAQ for Adobe muse here: https://forums.adobe.com/docs/DOC-5011
-Sam

ITunes Store image links do not display - previews & purchases do not work

PLEASE HELP!
Below are the images of what I am seeing.
And I promise you I have really made an effort to research and try to resolve this without success. I have even run iTunes on a completely seperate computer and a different login (both OS user login and iTunes store login) and have the exact same issue.
I have reinstalled with a reboot (several attempts), performed a winsock reset, followed procedures in TS4123 for LSP conflicts, I have cleared my cache, I have checked for Firewall issues, I have restarted my cable modem, I have copied iTunes store links to a browser to check that images are displaying - nothing resolves this problem.
Email support has only recommended what is already posted in communities forum and on the knowledge base.
I have seen that in past there have been posts related to this specific issue but were not answered (for what I found). It seems that unless you are having a complete white screen when accessing the iTunes store that there is no solution for a problem like mine??
Also only "Ping" will display all images for image links.
Thanks in advance for any help / feedback!
and
* .... I should reiterate that I can not make any purchases, save to wish list, watch or listen to previews.

Update:
Still trying to resolve this problem (been working on it for the better part of 2 days now)
KB - TS1379 ( http://support.apple.com/kb/TS1379 ) Also does not resolve this issue...
Still need help please.

Invoicing party display made through OMRMB not working

Similar Messages

Maybe you are looking for