Invoicing Plan Tab in PO invoice tab

Hi, If we make any framework order than there is a tab comes in Invoice tab say Invoicing plan. But it doesn't appear in other type of PO's. Where we do this setting in SPRO?
Edited by: SunilSisodia on Apr 23, 2010 2:15 PM

Hi VS
The best option for your requirement is ERS.
You can receive the material as and when required and without doing the Invoice verification you can settele the vendor liabality through MRRL at given interval... for your case every month.
for doing this. you need to do in
Vendor master -- Purchasing data >>>> tick GR based Invoice verification and Auto end.Rg set
In Info record set GR based Invoice verification and tax code.
In PO verify that Tax code, payment terms and GR based invoice verification are ticked /enterd.
Do MIGO
Settle through MRRL ( no Invoice required from vendor ) it will generete the credit memo automaticaly..
Hope this solve your issue.
Regards
Anand

Similar Messages

Invoice Plan settlement with Logistics Invoice verification -MRIS

Dear All
Currently we are using Invoicing Plan Purchase Orders with Partial Invoicing plans and do a normal Logistics Invoice verification
We would like to set up the Periodic Invoicing Plan scenario with Invoice Plan Settlement via MRIS . Can you please let me know the details of settings to be done for this
Regards
Shyam

Hi Shyam,
Theres no extra customizing to invoicing plans. The steps are quite straight forward as follows:
enter transaction ME21N
enter vendor and material (quantity & amount etc)
ensure you enter an account assignment category
on the delivery tab select GR non-valuated
on the invoice tab deselect GR-Based IV
select the invoice plan button and select periodic plan
On the next screen enter a start date and an end date
The selection settlements should be automatically populated.
After you save the PO you should be able to enter the invoices through transaction MRIS
once the invoice is due in accordance to the selection settlement dated on the invoicing plan
screen.
Hope this helps,
Adam.

Purchase Order with Invoice Plan

Hi,
I need to understand working with Invoicing plans for a Purchase Order. Especially the service PO for the rents and other related services.
How the PO is linked to the Invoice Plan and how the process happens in SAP?
Thanks in advance!

Creating an Invoicing Plan
The following procedure describes how to create an invoicing plan with the pre-Enjoy ordering transactions (ME21, ME22, ME23).
The procedure described is also applicable u2013 with certain restrictions u2013 to the Enjoy purchase order (ME21N, ME22N, ME23N).
If you are using the Enjoy purchase order, you will find:
·         The Invoicing Plan button and the indicators for GR-based invoice verification (GR-Based IV), service-based invoice verification (Srv.-Based IV), evaluated receipt settlement (ERS), and invoice receipt (Inv. Receipt) among the item details on the Invoice tab page.
·         The account assignment among the item details on the Account Assignment tab page
·         The Goods Receipt and GR Non-Valuatedindicators among the item details on the Delivery tab page
Prerequisites
Vendor Master Record
Before you can use the invoicing plan with automatic settlement, the Evaluated Receipt Settlement Delivery indicator must be set on the Purchasing Data screen in the vendor master record.
(If you wish to enter invoicing dates manually, this is not necessary.)
Purchase Order
●     We recommend using a framework order (that is a purchase order with a validity period and a reason for rejection). The invoicing plan can adopt the validity period specified in the PO header.
●     PO items for which you wish to use an invoicing plan must have account assignment irrespective of whether a material with a master record, a material described by a short text, or an external service is involved.
●     The GR/IR control facility must be set up in such a way that no goods receipt (or, in the case of services, no service entry) is expected - only an incoming invoice. If you wish to have automatic settlement, you must also set the Evaluated Receipt Settlement indicator.
If you nevertheless wish to allow service entry sheets for the item (e.g. for information purposes only), you must set the GR Non-Val. indicator.
Customizing
Under Purchase Order à Invoicing Plan in Customizing for Purchasing, you can maintain data such as the desired invoicing plan types, date categories, and date descriptions.
Procedure
       1.      Create a purchase order with account assignment (framework order).
Click to access the item overview (or the overview of service lines if you chose item category D for services).
       2.      Enter the desired material or service, the quantity, and the price.
       3.      Select the desired item and click Account Assignments to access the account assignment screen. Enter the account assignment for this item.
       4.      Click to access the item detail screen. Check that the GR/IR control indicators are set correctly on the item detail screen.
○     The GR and GR-Based Invoice Verification or Service-Based Invoice Verification indicators must not be set.
○     IR must be set.
○     You must set ERS if you wish to have Evaluated Receipt Settlement.
○     If you wish to have service entry sheets purely for information, for example, allow non-valuated goods receipt (i.e. select the GR Non-Val and GR indicators).
       5.      Choose Item ® Invoicing Plan. A window appears, in which the invoicing plan types predefined in Customizing are suggested. Choose the desired invoicing plan type and click Continue.
You can use the following invoicing plan types:
○     Periodic Invoicing Plan
■      You use the periodic invoicing plan if the total value of the PO item is to be invoiced in each period.
■      The system creates the invoicing dates automatically on the basis of the settings in Customizing.
■      The invoicing date and the amount to be invoiced are shown for each settlement period (e.g. month). In the case of the periodic invoicing plan, the amount represents the total value of the PO item.
■      You can change the suggested dates and block individual dates for automatic invoicing if necessary.
■      You can enter the start and end dates for the invoicing plan.
■      With the Dates from and Dates to fields, you can determine that an invoicing plan does not contain invoicing dates extending over the entire validity period of the purchase order but only for a certain period within that validity period. (E.g. within a validity period from 1.1. to 12.31, only dates within the period 1.1. to 06.30.)
■      With the Horizon field, you control how far into the future dates can be created. If you enter a date rule that adds six months to the current date here, invoicing dates will be created for just half a year in advance in each case.
The system automatically creates new dates if you change the invoicing plan or when you invoke the transaction for Updating Periodic Invoicing Plans. See Generating Further Invoicing Plan Dates
■      The In Advance indicator allows you to specify whether the invoice is to be created with regard to a prior or subsequent period. (E.g. at the beginning of February, either in advance for the month of February or in arrears for the month of January).
■      In addition, fields with information on the existing invoicing plan are displayed (e.g. the calendar upon which the date determination process is based).
○     Partial Invoicing Plan
■      You use the partial invoicing plan if the total value of the PO item is to be invoiced in several partial amounts.
■      You get an empty date overview in which you can manually enter the desired dates.
■      If you work with a reference invoicing plan, the system automatically generates dates in accordance with the reference plan.
You have the following options:
●      You create a reference invoicing plan in Customizing for the invoicing plan type.
●      You enter an existing invoicing plan as reference plan directly in the invoicing plan for the PO item.
■      You can flag a date in field B (Billing/Invoicing Rule) as follows:
●      As a down payment (percentage or value)
●      As an invoicing date (percentage or value)
●      As a final invoice
       6.      Click to return to the item overview.
       7.      Click to save the purchase order item with the invoicing plan.
You can then start the automatic invoice creation process during invoice verification.
For more information, refer to the section Settlement of Amounts Due Under Invoicing Plans.
Once assigned to an item, the invoicing plan type (e.g. partial invoicing plan) cannot be changed. If you wish to assign a different invoicing plan type, you must delete the item and create a new one.
Generating Further Invoicing Plan Dates
If you have assigned a periodic invoicing plan to a PO item but have not initially defined invoicing dates covering the entire validity period of the purchase order, you can generate further dates in due course.
You have created a PO item with a periodic invoicing plan for a certain planned procurement. The purchase order is valid from 1.1. to 12.31. When creating the invoicing plan, you specified one invoicing date per month for the first half of the year. You have not yet planned any dates for the second half of the year because you do not wish information from the invoicing plan to be passed on to purchase order commitments at this stage, for example.
By mid-June, it is clear that the PO is to proceed as envisaged, and you therefore wish to schedule invoicing dates for the remainder of its validity period.
Procedure
To schedule further invoicing dates, proceed as follows:
Choose Purchase order ® Follow-on functions ® Period. invoicing plan
Specify the purchase orders for which invoicing dates are to be generated in the invoicing plan and perform the function.
A log can be created if desired.
Result
The system adds further dates on the basis of information such as the validity period or horizon from Customizing, the purchase order, and the invoicing plan.
regards,
indranil

Invoice Plan Run T.code MRIS : Message getting - No documents selected

Dear All Experts,
Very Good Morning !
I am configuring Invoice Plan for my periodic invoicing requirement, While I am referring this these threads found on our forum SDN.
1 ) [Invoice Plan|Invoicing plan; - Post
2 ) [Invoice Plan in SAP|http://wiki.sdn.sap.com/wiki/display/HOME/InvoicingPlanin+SAP] - Wiki
I am following as per the experts replies mention in it and finally running MRIS for the same, I am getting below message after execution :
No documents selected
Message no. M8702
Diagnosis
There are no documents that comply with your selection criteria.
Procedure
You can enter new selection criteria or exit processing.
Steps I produce for this scenario :
For PO :
1 ) Selected FO in ME21N / Enterted validity period in time frames 01.11.2011 to 30.12.2012 ( DD.MM.YYYY)
3 ) Created account assignment PO with K, Tax code V0 entered.
4 ) Item Details - Invoice Tab : Inv. Receipt - TICKED. ERS - TICKED.
5 ) Item Details - Delivery Tab : Goods Receipt - TICKED GR Non - Valuated - TICKED
6 ) Item Details - Invoice Tab : Invoice Plan is selected - 10 ( Standard SAP )
For Vendor Master : XK02
1 ) GR Based Inv Verification - Not Ticked.
2 ) AutoEvalGRSetmt. Del - TICKED
3 ) AutoEvalGRSetmt. Rel - TICKED
After all this running MRIS I am getting message " No documents selected ".
Apart all these settings have I missed anything here to configure ?
Experts guidance / inputs / comments will be very helpful.
Regards,
Revati Joshi.

Dear redriver,
I tried as you guided, and saved the condition type INS. And run MRIS still no luck.
I tried with selection & unselecting of Test Run. It is giving me same result.
Let me produce the vendor master XK02 details for purchase organization :
1 ) GR- Based Inv Verfi. - TICKED.
2 ) Auto Eval GRsetmt Del - TICKED.
3 ) Auto Eval GRsetmt Ret - UNTICKED
In PO :
Delivery Tab :
1 ) Goods Receipt - TICKED.
2 ) GR Non - Valuated - TICKED
Invoice Tab :
1 ) Inv. Receipt - TICKED
2 ) ERS - TICKED.
3 ) Tax Code - V0 Assigned.
4 ) Invoice Plan : Invoice Plan Tpe 10 is selected as a Sample periodic invoice plan.
Anything else need to check ? Thank you quick replies.
Regards,
Revati Jsohi.

Invoice Plan and Quantity Discrepancy

I'm not sure if this belongs on this forem or the financial forum but since it involves POs and an MM transaction(MIRO) I decided to post it here.
We have an IR Only Purchase Order with multiple line items. The PO Order Quantity varies from 1 EA up to 6 EA on 34 different line items. An invoice plan manual invoice plan sing "Sample Partial Invoice Plan(20) as the Invoice Plan Type. The payments are split 30% - 30% - 30% - 10% with each payment due on a specific date.
So here is the problem:
When the first invoice was processed for 30% it assigned a "quantity of 1" on each line item in the invioce. This is affecting the Commitment dollars left on the order. For example for the line item with 4 EA in the PO quantity, the commitment dollars only dropped 25% of the 30% total for that line. So let's say the line item wa for $100,000 it should have reduced the commitment amount by $30,000. Instead since the invoice quantity defaulted to 1 it only reduced the commitment amount by $7,500.
This same ratio type posting occurred on each line item that had more than 1 EA on the PO. It appears that when processing the MIRO it will not allow one to change the quantity to the PO Order Quantity. Does anyone know how to change the quantity on the Invoice or is there a way to get the whole line item quantity to default onto the invoice when a payment is due?
Thanks in advance for your help,
Dan

Hi Dan,
If the unit of measurement was set up as relevant for value based commitment reduction in transaction
CUNI, then the commitment reduction will be the same as the invoice amount.
If the unit of measurement was set up as relevant for quantity based commitment reduction in transaction
CUNI, then the commitment reduction is always according the to invoice quantity, which could lead to differences in the commitment values - which you have described.
Regards,
Edit

Partial Invoice Planning

Hai
Now we are in a Blue Print stage.we have a requirement for Partial Invoice Planning. so kindly Explain the Partial Invoice Planning customization settings in breif.it will be more useful for our ongoing project.
Regards
peter

Hi
These are the configuration settings required.
SPRO-> IMG-> Materials Management-> Purchasing-> Purchase Order-> Invoicing Plan-> Invoicing Plan Types-> Maintain Partial Invoicing Plan Types
In this step, you define partial invoicing plan types by specifying the relevant control data for each desired instance.
For each partial invoicing plan type, you can store a reference plan (for the definition of the reference plan, see the step "Maintain date proposal for partial invoicing plans").
In PO processing with this invoicing plan type, the dates are taken from this reference plan, revised on the basis of the current rules, and inserted into the invoicing plan.
Activities
1. To create an invoicing plan type, you must enter an alphanumeric key of max. two characters in length, plus a descriptive text.
2. Maintain the relevant control data on the detail screen for the invoicing plan type.
You can carry out the config bbelow these steps based on your sytem requiremnts.
Please go through the link for more details on the procvcess
http://help.sap.com/saphelp_erp60/helpdata/en/75/ee0d3355c811d189900000e8322d00/frameset.htm
Thanks & Regards
Kishore

Invoicing Plan complete process

Dear All,
Can anybody give the Invoicing Plan config(Periodic and partial) and how to use in PO and finally to pay the vendor.
Regards

Hi
You can use this business process to process invoice plan settlements. The invoicing plan is a facility that allows you to schedule desired invoicing dates for planned procurements independently of the receipt of the relevant goods or performance of the relevant services. It lists the dates on which you wish to create and then pay the invoices in question. You can automate creating invoices triggered by the dates in the invoicing plan.
Steps :
1.Invoicing Plan Types:Define the type of Iof invoicing plan:
Partial invoicing plans, and
Periodic invoicing plans
2.Maintain Date IDs : These are texts briefly describing the relevant dates in the invoicing plan.
for Example
0001     Rent
0002     Maintenance
0003     Contract Conclusion
0004     Engineering/Design
3.Date Categories
Maintain Date Category for Invoicing Plan Type
Define Default Date Category for Invoicing Plan Type
4.Maintain Date Proposal for Partial Invoicing Plans
4..You must Define Rules for Date Determination.
6. Define Invoice Block
Regards

Invoice plan and ERS

Guys,
What is the difference between ERS and Invoicing plan?
Are they both same? In that case, why is the settlement done on Tcode MRRL for ERS and MRIS for Invoice plan....?
Please clarify my doubt.
Happy holidays,
Nureya

Hi ,
Please go through this below points difference between invoice plan (MRIS) and ERS (MRRL) in invoice verification process.
Use of Invoice plan in SAP MM ( Logisitic Invoice Verification )
Through the use of Invoicing Plan for leasing agreements and such like, you aims to considerably reduce the manual data entry effort in the purchasing and invoice verification (A/P) department.
The invoicing plan enables you to schedule the desired dates for the creation of invoices relating to the planned procurement of materials or services independently of the actual receipt of the goods or actual performance of the services. It lists the dates on which you wish to create and then pay the invoices.
You can have the system create the invoices automatically on the basis of the data in the purchase order, thereby triggering payment of the vendor. It is also possible to enter the invoice for an invoicing plan manually. It is recommended that the invoice shall be created via Logistics Invoice Verification ---> Automatic Settlement --->Invoicing Plan Settlement. This
transaction can also run in the background.
Following are necessary customizings and preconditions for using the Invoicing Plan functionality in SAP -
1) You must maintain the settings in Customizing for purchasing (for example, invoicing plan type, date categories, date descriptions, and date sequence proposals). The related path is IMG ---> Material Management ---> Purchasing ---> Purchase Order ---> Invoicing Plan ......
2) The Purchasing document with FO Document Type (Framework Order) must be used. This document type requires that a validity period be entered in the PO header. This specification is adopted in the invoicing plan, provided that this has been predefined in Customizing for the relevant invoicing plan type.
3) The purchase order item must have an account assignment.
4) The Logistics Invoice Verification must be used.
5) The vendor must have agreed to use the automatic invoice creation facility (since we will use automatic settlement to create the invoice). In this case, the 'AutoEvalGRSetmtDel.' indicator must be flagged in the vendor master record.
Furthermore, once Purchase Order is created with order type FO, ensure that the indicators for GR/IR control have been set correctly on the item detail screen. The Goods Receipt indicator may only be set in combination with the Goods Receipt Non-Valuated indicator. The Invoice indicator must be set. For the automatic creation of invoices, the ERS (Evaluated Receipt Settlement) indicator must be also set. A further prerequisite for automatic settlement is that a tax code must be entered in the purchase order.
Please go throuth this SAP help linkl
[Help.SAP.COM|http://help.sap.com/saphelp_46c/helpdata/en/75/ee0d3355c811d189900000e8322d00/content.htm]
ERS
[ERS|http://help.sap.com/saphelp_srm30/helpdata/en/fb/8dec38574c2661e10000000a114084/content.htm]
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20c57f75-d26f-2910-c3aa-dee124530121?quicklink=index&overridelayout=true
Prerequistic settings for ERS:
1. Vendor master purchasing data ( Flagged as GR-Based Inv Verification: Indicator specifying that provision has been made for goods-receipt-based invoice verification for a purchase order item or invoice item.
Auto Eval GR Settlement Delivery: specifies that evaluated receipt settlement or the automatic generation of the invoices are allowed in relation to materials supplied or services performed
Auto Eval GR Settlement Return: Specifies that automatic evaluated receipt settlement of return items is allowed.
2. Check in Info record to Ensure that No ERS indicator is not checked in the info record for the vendor, Material + Vendor + Plant + Purchase organization.
3. In PO ( Tax code maintain and Ticked GR based IV and ERS indicator )
4. Settled the invoice using MRRL
Difference between ERS and Invoice plan are :
" ERS is the automatic invoice payment settlement to our supplier like EDI payment.
Once we received the GR quantity system automatically settled the payment using ERS t.code MRRL.
" There are two types of invoice plan ( Partial and Periodic invoice plan ) - is used to settled the Rental , period based payment etc using MRIS.
With Thanks,
Thiru

Partial & Periodic Invoicing plan

What is Partial & Periodic invoicing plan ? How it can use for some perticular monthly service?
what are the settings to do it in SAP.

You use the periodic invoicing plan if the total value of the PO item is to be invoiced in each period. When you create a PO with a periodic invoice plan only the value of one month is displayed on the header status and used for the release strategy. If you want the entire 12 months included you should use the partial invoice plan and specify the invoice amount for each month
Search the forum.
Regards
Ayyallas

Blocking dates in invoice Plan

Is there any way we can block periods in a invoice plan.
Assume that invoice plan is from 01.01.2009 to 31.12.2009.I need to block the payments for two months only (July & August)
Apperciating your reply.

Thanks for ur timely response.
Our invoice plan is as below
01.01.2009 to 31.03.2009
01.04.2009 to 30.06.2009
01.07.2009 to 30.09.2009
01.10.2009 to 31.12.2009
The requirement is to block the Months July & August only.
is it possible.

Excise Invoice Tab Page/ Document Info Tab Page is not appearing in MIGO

Dear Friend
For a particular job work PO , with account assignment category F & item category L, non valuaated material, when we are doing migo, excise invoice tab page/ Document Info tab page is not appearing in document header. From The said tab page we can select the challan.
In J1ID, I have maintained Vendor PAN number and also material chpter id combination.
Thanks
Chandra

Hi
I maintained material chapter Id combination & vendor Excise Details. We do not maintain any plant -vendor combination. This is a non valuated material with material type unbw. Do I need to maintain cenvat determination tab for this material?
Thanks
Chandra

"Material Invoice Cycle- field" in the Invoice tab of the Purchase Order?

Hi,
Does somebody has a clue on the field "Material Invoice Cycle- field" in the Invoice tab of the Purchase Order?
What are the functions, dependencies and the scenarion one can use this field.
Regards

Hi
Here in Is-oil we have invoice cyles. Provisional invoice, Final invoice, interested invoice, settlement invoice etc..
So in sales at first provisional invoice has been created than the final invoice based on the Provisional invoice.. and further invoices like interest invoice & settlement invoice ..
So here we are using 4 invoice cycle.. hence you have to define in the Spro-->industry solution -->oil & gas > cross component application>maintain the invoice cycle numbers... 4
And this data has to be used in Condition type
Spro--> industry solution -->oil & gas > cross component application> MM split invoice -->Enter the data in additional invoice .
These is the function of Material invoice cycle field...
Thanks and regards
Raja

Invoice should disappear from Process receivable Tab page

Hi All,
Business requirement:- Invoice raised 1000$ but customer paid 900$ and customer deduct 100$ for TDS. after few days customer give us TDS certificate that time it is knock off, till then it appear as open item in Invoice tab page of Process Receivable.
business need this type of invoice should not come in Invoice tab page of process receivable..
Regards
Arun

Hi Arun,
You can define a special "Reason Code" for such invoices and then apply this reason code while clearing such invoices.
Now, the process receivable list for the selected work list item is prepared in the two function modules - FDM_COLL_INVOICES_READ and FDM_COLL_INVOICES_READ_CLOSED. You will have to add implicit enhancement at the end of these two functions to remove invoices with this reason code.
Thanks,
Prateek

SHCess field not appearing after using utilization tab in excise invoice

Dear All,
SHCess field not appearing after using utilization tab in excise invoice.The other fields and values releated to SHCess are appearing.
Please give the inputs.
Regards,
deepti

issue resolved

Badi or Enhancement for Purchase order invoice plan change for ME22N

Hi ,
I have a req to have a custom tab at the header level with the push button in ME22N , By clicking the push button i need to update the invoice plan detail to all item level by using the 1st line item invoice paln entered while creating PO . I have done with adding the custom tab using MM06E005 enhancement. The problem i am facing is need to change the PO invoice plan detail for all line item. Please let me know the BADI or Enhancement to change the PO detail in the Tcode ME22N . Any Badi before save or after save with invoice plan details.
<offer removed by moderator>. Many thanks for you help!
Regards,
Vinoth.v
Edited by: Thomas Zloch on Oct 14, 2011 11:59 AM

Hi Eduardo
ME_PROCESS_PO_CUST is don'tt have the Invoice plan and ME_GUI_PO_CUST is for screen but i need the badi to get the invoice plan details and change the remaining item with the invoice plan .
Regards

Invoicing Plan Tab in PO invoice tab

Similar Messages

Maybe you are looking for