Invoking a SAP web service from Dreamweaver MX

I am trying to invoke a SAP web service from ColdFusion and it looks like ColdFusion does not even recognize the rfc generated wsdl file as a wsld file. I have tried other wsdl url's outside my company and they work...so I know that web services at least work in ColdFusion. Can anyone advise on this topic?
Thanks!

Paula,
I suppose you're using CFINVOKE (http://www.activsoftware.com/code_samples/code.cfm/CodeID/44/ColdFusion/Invoking_SOAP_Web_Services_with_ColdFusion_MX_CFINVOKE_Tag) or are you using a third party tool like CFX_SOAP (http://www.activsoftware.com/products/productdetail.cfm/id/1015)?
Are you working with WebAS 6.4 or 6.2?
It works with web services created with WebAS 6.4, but you should generate proxy classes. Check Thomas' weblog (second part of it)->https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1012. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
The WSDL generated by this method is more standard than the one generated when you just Remote enable an FM and look at the webservice browser.
Th core of CF MX is Java and that engine is rather strict in standards.
Eddy

Similar Messages

Unable to invoke a protected web service from PL/Sql

Hi All
I am trying to invoke a protected web service from Plsql. But getting the below error.
error message is ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00104: Warning: element "html" is not declared in the DTD
Error at line 2
If i try to invoke the service after disabling the protection then i am able to call it and getting response. Pls let me know how to deal with this authentication issue.
Below is the invoking code i am using.
BEGIN
generate_envelope(p_request, l_envelope);
show_envelope(l_envelope);
l_http_request := UTL_HTTP.begin_request(p_url, 'POST','HTTP/1.0');
UTL_HTTP.set_header(l_http_request, 'Authorization', 'Basic Y29tcGxpYW5jZS5nZW46Y29tcGxpYW5jZQ11');
UTL_HTTP.set_header(l_http_request, 'Content-Type', 'text/xml');
UTL_HTTP.set_header(l_http_request, 'Content-Length', LENGTH(l_envelope));
UTL_HTTP.set_header(l_http_request, 'SOAPAction', p_action);
UTL_HTTP.write_text(l_http_request, l_envelope);
l_http_response := UTL_HTTP.get_response(l_http_request);
UTL_HTTP.read_text(l_http_response, l_envelope);
UTL_HTTP.end_response(l_http_response);
l_response.doc := XMLTYPE.createxml(l_envelope); -- Error Line
l_response.envelope_tag := p_request.envelope_tag;
l_response.doc := l_response.doc.extract('/'||l_response.envelope_tag||':Envelope/'||l_response.envelope_tag||':Body/child::node()',
'xmlns:'||l_response.envelope_tag||'="http://schemas.xmlsoap.org/soap/envelope/"');
show_envelope(l_response.doc.getstringval());
check_fault(l_response);
RETURN l_response;
END;
I tried invoking the service by passing username and password in LDE tool and captured the Request SOAP Message. I saw username/password encrypted to "Y29tcGxpYW5jZS5nZW46Y29tcGxpYW5jZQ11". Hence tried with that.
I have also tried the below line for authentication but it is not working.
utl_http.set_authentication(l_http_request, 'myusername', 'mypassword','Basic',false);
Pls assist me in resolving this.
Thanks,
PKV

One more update i tried printing l_http_response.status_code and got 302.
Thanks,
PKV

Calling SAP Web Service from BPEL

Hi
I am trying to call a SAP Web Service friom BPEL using the SAP WSDL.It requires a basic authentication (Username/Password) which i am providing as partnerlink properties in bpel.xml.
While testing the BPEL Process from the console, it is giving me an error
"<summary>exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 401 Unauthorized</summary>"
But when i am testing it from SOAP UI tool it is giving me the desired response.
Does anyone has any idea why it is failing from BPEL?Is there any configuration which i am missing?
Regards
Ayush

HI Ayush / Suryaveer..
I am stuck at the same situation, trying to invoke a secured SAP webservice. The invoke fails with a security previlege exception.
Am using the basicHeaders property to propagate the credentials to the SAP system.
Can you please suggest on the same.
credential propagation in bpel.xml :
<property name="basicHeaders">propagate</property>
<property name="basicUsername">ABC</property>
<property name="basicPassword">DEF</property>

Invoking Webcenter sites web services from SoapUI

Hi,
I want to invoke the OOTB web services of WCS from soap UI.
I have installed the soap UI and trying to create a new project. I entered the WCS web service URL "http://localhost:8080/cs/REST/types" in the create new project pop up in soapUI.
On hitting OK button, I am getting the following error:
Error loading [http://localhost:7001/cs/REST/types]: org.apache.xmlbeans.XmlException: org.apache.xmlbeans.XmlException: error: does not close tag
If I use the same URL in IE browser, I am redirected to the CAS login page, and upon entering the credentials for WCS site, I am shown the XML result
I think I am not able to figure out how to pass WCS site credentials from soapUI. Please help.

It is not a simple case of appending or posting credentials to the REST call, you first need to get a ticket, then a service ticket, then you can make the rest call with your service ticket. You can find a description of the sequence of http calls here http://docs.oracle.com/cd/E29542_01/doc.1111/e29634/wemsecurity.htm#autoId2
I am not very familiar with soapUI to describe exactly how to create this as a continuous and automatic sequence of steps but it seems you can do it within a generic project with a TestCase, containing two HttpRequest TestSteps, one to get the ticket, one to get the service ticket.
The first TestStep needs to post "username" and "password" params to http://{host}:{port}/cas/v1/tickets, with the postQueryString box checked. The response contains the TGT (ticket granting ticket), which you can extract and store as a variable using an assertion with a script (see here). The response looks like this
HTTP/1.1 201 Created
Server: Apache-Coyote/1.1
Location: http://celovmfw010.us.oracle.com:8080/cas/v1/tickets/TGT-20-EokDucPIpGduAfbazhmK7cDTPJ2ZZeaNH07AyazZ4eFOcCJbMP-cas-celovmfw010.us.oracle.com-1
Content-Type: text/html;charset=UTF-8
Transfer-Encoding: chunked
Date: Tue, 04 Feb 2014 02:53:46 GMT
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"><html><head><title>201 The request has been fulfilled and resulted in a new resource being created</title></head><body><h1>TGT Created</h1><form action="http://celovmfw010.us.oracle.com:8080/cas/v1/tickets/TGT-20-EokDucPIpGduAfbazhmK7cDTPJ2ZZeaNH07AyazZ4eFOcCJbMP-cas-celovmfw010.us.oracle.com-1" method="POST">Service:<input type="text" name="service" value=""><br><input type="submit" value="Submit"></form></body></html>
The second TestStep then posts "service" param to http://{host}:{port}/cas/v1/tickets/{your_TGT}. The response contains the ST (service ticket), which you can extract with another assertion.
Then you can make the REST call http://{host}:{port}/cs/REST/types?ticket={your_ST}
Phil

Invoking multiple host web services from JCAPS web service (RemoteException

I am trying to invoke 2 web services sequentially ( not JCAPS service , some host service exposed as web service ), from my jcd which is also exposed
as a web service.Both the host service have incorporated basic http authentication scheme,and i am setting the security credentials in the enviornment.
(ie SOAP/HTTP external systems - client).
However when I deploy my web service and try to invoke the host services,the first host service being called is invoked successfully and i get the response back.But the second service throws a RemoteException and the SOAP response carries "Client not authorized" message in faultstring detail tag.
I do have separate external SOAP/HTTP systems for both the services,also the external systems have been configured with
the HTTP basic authentication credentials.
Infact I tried creating 2 separate JCAPS service for calling the host services individually.I am able to get the expected output
from the services.
The issue only arises when the host services are invoked in a sequential manner from a single JCAPS service.
Please do let me know if i can fill in some more gaps in the information i have provided.
Could this possibly be an issue in JCAPS?

I have couple of doubts in this context.
a) Is this issue only restricted when web services not developed using JCAPS are invoked or it arises also when 2 JCAPS external services are invoked
sequentially.(I tried a PoC where in i created 2 deployments for calling the host services and invoked the deployment using another JCAPS web service and it worked fine)
b) Also if this issue only arises when the external web services being invoked have security credentials or just invoking any web services in sequence create
this problem.
PS : Any link to contact the sun support team?

Invoke External HTTPS Web Service from OSB 11G

Hi,
We have a requirement to invoke a HTTPS web service hosted by third-party and we have to send HTTP basic authentication detials also.
Third party given us the HTTP basic authentication details and only certificate nothing else.
After some research service account can be used for basic authentication and service key provider for https requirement.
But before service key provider creation there are steps to import the certificate into weblogic server and do some config steps (PKI cred mapping and all )I have gone through the forums but i am new to OSB and SSL i could not understand.
Can some one help with detailed steps.
Thanks in Advance
Srikanth

You can simply use "Execute Script" operation in Workbench and make use of java.net.URL. Below links should help :
http://www.mkyong.com/webservices/jax-rs/restfull-java-client-with-java-net-url/
http://www.adobe.com/devnet/livecycle/articles/building-xml.html
http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm?content=000581.html
Hope this helps.
-Wasil

Invoking a secure web service from a standalone java client

I am using stand alone java client to invoke a web service. This web service in turn invokes a jcs which is protected ( role based access ).
I am using a proxy at the client side for web service invocation
FileSubmission_Impl filesubmission_impl = new FileSubmission_Impl();
FileSubmissionSoap filesubmissionsoap = filesubmission_impl.getFileSubmissionSoap();
filesubmissionsoap.processFiles(...)
This works if there are no security constraints on any of the resources (@common:security).
I need to pass the username and password from the java client that will be authenticated and allowed to access the protected resources.
Please let me know as to how this can be achieved ( passing username and password from client )

Paula,
I suppose you're using CFINVOKE (http://www.activsoftware.com/code_samples/code.cfm/CodeID/44/ColdFusion/Invoking_SOAP_Web_Services_with_ColdFusion_MX_CFINVOKE_Tag) or are you using a third party tool like CFX_SOAP (http://www.activsoftware.com/products/productdetail.cfm/id/1015)?
Are you working with WebAS 6.4 or 6.2?
It works with web services created with WebAS 6.4, but you should generate proxy classes. Check Thomas' weblog (second part of it)->https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1012. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
The WSDL generated by this method is more standard than the one generated when you just Remote enable an FM and look at the webservice browser.
Th core of CF MX is Java and that engine is rather strict in standards.
Eddy

URGENT: Error while invoking soap-based web service from BPEL process

I am trying to invoke a soap-based web service deployed in a different OC4J container but on the same iAS middle tier install as the BPEL server. The deployment is successful. I am running 10.1.2 BPEL server.
But invoking a process throws the following error.
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="summary">
<summary>when invoking locally the endpoint 'http://stadd53.us.oracle.com:7779/idm/ProvService/cps', ; nested exception is: ORABPEL-02052 Cannot lookup BPEL domain. The BPEL domain "ProvService" cannot be found; the domain may not have initialized properly. Please verify that the BPEL domain loader has a valid set of initialization properties in the application properties file.</summary>
</part>
<part name="detail">
<detail>ORABPEL-02052 Cannot lookup BPEL domain. The BPEL domain "ProvService" cannot be found; the domain may not have initialized properly. Please verify that the BPEL domain loader has a valid set of initialization properties in the application properties file.</detail>
</part>
</remoteFault>
Any ideas on what the problem might be ?

Sandor,
Thanks. Your suggestion of turning off optSoapShortcut worked. So does that mean that by default remote web services cannot be invoked from BPEL process by SOAP - unless this configuration change is done ?

Invoking long running web service from BPEL

I have a web service. It takes more than 5 minutes (could be up to a few hours) to run. Now I need to invoke it from the BPEL workflow. I tried it, but doesn't work. It seems that there is timeout problem. Does anyone know how to integrate the long-running process into workflow?
Thanks a lot.

Yes, I am using a sync process. Currently, I divide the process into two parts: launchProcess() and getResult(). Then in BPEL workflow, I use a loop to check getResult(). It works, but I am wondering if there is any better solution.
I think my situation is very common in the community. Fortunately, I can split the process into two parts. But for some long-running process, it can be difficult to split. How can we implement the process as an async process and integrate it into BPEL workflow? My process is written in Java. I am not familiar to the async process. Any suggestions?
Thanks a lot.

Problem invoking UCM 11g Web services from ODI 11g

We have a running UCM 11g instance with its web services (GenericRequest) properly configurated.
The wsdl is published in the url http://ucmt:16200/idcws/GenericSoapPort?WSDL and reacheble from any web browser.
The service can be easily invoked from external applications such as soapUI 4.5.1 returning the correct SOAP response. Here is a sample request returning correct results:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ucm="http://www.oracle.com/UCM">
<soapenv:Header/>
<soapenv:Body>
<ucm:GenericRequest webKey="cs">
<ucm:Service IdcService="DOC_INFO">
<ucm:User></ucm:User>
<ucm:Document><ucm:Field name="dID">27099</ucm:Field></ucm:Document>
</ucm:Service>
</ucm:GenericRequest>
</soapenv:Body>
</soapenv:Envelope>
The problem occurs when we invoke it from the ODI assistant, when we type the WSDL URL and click in "Connect to WSDL" button,
we get the following error in the middle pane : Invalid Request : java.lang.NullPointerException+
The port combo and the operation pane are correctly populated
UCM version is: 11gR1-11.1.1.6.0-idcprod1-121115T130554 (Versión Interna:7.3.3.183)
ODI version is: 11.1.1.6.0
Java(TM) Platform 1.6.0_30

I would suggest contacting support channel to analyze such NPE if there is a product bug causing it.

Help! Invoking the same Web Service from multiple mxml components

Hi,
I'm building an application that interacts with a Web Service. The application (App A) has a tabNavigator with two tabs (Tab1 and Tab2). Tab1 contains a custom component (Comp A) and Tab2 contains another custom component (Comp B). Tab1 is the first tab, and Tab2 is the second tab.
Comp A and Comp B each handles the "creationComplete" event by invoking an operation, Op1, of the Web Service.
The problem is, when App A starts up, Comp B can successfully invoke Op1 in its creationComplete handler, but Comp A cannot. In fact, Comp A's call to Op1 does not return. Comp A is created before Comp B.
If the application has only one tab (either Tab1 or Tab2), each Comp can successfully invoke Op1 at application start-up.
Comp A and Comp B each has its own declaration section for the Web Service and CallResponder for Op1.
I'm using the trial version of Flex Builder 4 and new to flex application development. Any help in debugging this problem would be greatly appreciated.
Much thanks,
--Hyong

I've been shown by a colleague (who is more experienced in .Net than am I) that this can be achieved by adding the target web service's WSDL to my invoking web service as a Web Reference. The original logic I was using, though working from VB 6 and Active Server Pages, can be simplified through the use of the WSDL definition for implementation in .Net.
Thank you for your responses,
-- Chris

Error when invoking pl/sql web service from bpel

Hi!
I have a simple 'Hello World' pl/sql web service. When i invoke it in asynchronous BPEL process, a local WSDL file is automatically generated for the parterlink used. The process even gets successfully deployed without any warning or error. But in the BPEL console when I create an instance, its alwaya being faulted and the audit give the following error at invoke:
"{http://schemas.oracle.com/bpel/extension}remoteFault" has been thrown. less
<remoteFault>
<part name="code" >
<code>Server.userException</code>
</part>
<part name="summary" >
<summary>when invoking endpointAddress 'null', java.net.UnknownHostException: www.proxy.us.oracle.com</summary>
</part>
<part name="detail" >
<detail>AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException faultSubcode: faultString: java.net.UnknownHostException: www.proxy.us.oracle.com faultActor: faultNode: faultDetail: {http://xml.apache.org/axis/}stackTrace:java.net.UnknownHostException: www.proxy.us.oracle.com at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:153) at java.net.Socket.connect(Socket.java:452) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at org.collaxa.thirdparty.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:155) at org.collaxa.thirdparty.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:117) at org.collaxa.thirdparty.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:158) at org.collaxa.thirdparty.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:450) at org.collaxa.thirdparty.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:94) at org.collaxa.thirdparty.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32) at org.collaxa.thirdparty.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118) at org.collaxa.thirdparty.apache.axis.SimpleChain.invoke(SimpleChain.java:83) at org.collaxa.thirdparty.apache.axis.client.AxisClient.invoke(AxisClient.java:147) at org.collaxa.thirdparty.apache.axis.client.Call.invokeEngine(Call.java:2732) at org.collaxa.thirdparty.apache.axis.client.Call.invoke(Call.java:2715) at org.collaxa.thirdparty.apache.axis.client.Call.invoke(Call.java:1737) at com.collaxa.cube.ws.wsif.providers.axis.WSIFOperation_ApacheAxis.invokeAXISMessaging(WSIFOperation_ApacheAxis.java:2113) at com.collaxa.cube.ws.wsif.providers.axis.WSIFOperation_ApacheAxis.invokeRequestResponseOperation(WSIFOperation_ApacheAxis.java:1611) at com.collaxa.cube.ws.wsif.providers.axis.WSIFOperation_ApacheAxis.executeRequestResponseOperation(WSIFOperation_ApacheAxis.java:1083) at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:452) at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInvocationManager.java:327) at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:189) at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:601) at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:317) at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:188) at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3408) at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1836) at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75) at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:166) at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:252) at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5438) at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:1217) at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:511) at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:335) at ICubeDeliveryLocalBean_StatelessSessionBeanWrapper16.handleInvoke(ICubeDeliveryLocalBean_StatelessSessionBeanWrapper16.java:1796) at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:37) at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:125) at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70) at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86) at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123) at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755) at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186) at java.lang.Thread.run(Thread.java:534) {http://xml.apache.org/axis/}hostname:NewUser-lap </detail>
</part>
</remoteFault>
Can anybody please tell what could be the problem,
Thanking in advance,
Deepika.

www.proxy.us.oracle.com -> www-proxy.us.oracle.com - looks like set in the obsetenv.bat file

Problems to invoke a secure Web service from Oracle BPM Studio 10.3

Hi all
I'm trying to consume a web service through HTTPS protoloco Oracle BPM Studio v10.3, but I get the following error: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target.
Some help!!
Thanks

Without going into any technical discussion about the code, my first question is what JDK version was used to create this which was imported into the form? Understand that Forms 10 runs on JDK 1.4.2, so if you used any newer JDK version, likely there will be problems.

Invoking web service from OBIEE11g failed socket timeout

Hi,
I encountered an error when I invoke web service from OBIEE 11g. The web serivce resides on Websphere running on other machine.
An error says that "Invoking web service failed due to socket timeout." and it seems that it stopped in just 40 secs.
Is there any settings of WebLogic server to avoid this? This web service normally runs for more than 60 sec.
I have checked several parameters in WebLogic admin console and changed those values, but I still receive the same error.
Invoking the same web service from SOAPUI sustains for more than 60 secs.
Regards,
Fujio Sonehara

Don't be too surprised. Sun figured this bug out in short order. I got the same error message when trying to do the same thing, just for the heck of it. Reference this article for details.
http://java.sun.com/webservices/docs/ea2/jaxrpc/ReleaseNotes.html
It contains information about bugs fixed in the WSDP EA2. So in answer to your question, download the newer pack from
http://java.sun.com/webservices/downloads/webservicespack.html
and your bug will go away. Happy Coding.
Legal Problems?
Legal Solutions, for a lot less than you might think.
[email protected]
http://www.prepaidlegal.com/go/pritchard45

Calling Web Service from Tuxedo

We have a need to invoke a web service from our Tuxedo Server code (all in C++). Would SALT help us in this? Or is there another tool that we could use to act as a web service client?
Thanks,
-gc

Hello Guru Chandar,
SALT 1.1 does not support invoking an external Web Service from Tuxedo side.
This outbound requirement is being considered, which allows Tuxedo customers
invoking a Web service in a Tuxedo manner. This will probably be supported
in the next SALT release.
At the moment, I think gSOAP is an alternative that can be used in Tuxedo
server code to help invoking external Web Services. gSOAP is an open source
project that provides a Web Service development toolkit to ease Web Service
client and server program in C/C++.
You can refer to the following web page to get more information about gSOAP:
http://www.cs.fsu.edu/~engelen/soap.html
Regards,
Oliver
<Guru Chandar> wrote in message news:[email protected]..
We have a need to invoke a web service from our Tuxedo Server code (all in
C++). Would SALT help us in this? Or is there another tool that we could
use to act as a web service client?
Thanks,
-gc

Invoking a SAP web service from Dreamweaver MX

Similar Messages

Maybe you are looking for