Invoking 'Intercompany Transfer' program fails with IXFR0004

Hi all,
I'm facing a problem. I tried to invoke the above program from GIS but the request completed with a warning and the log file showed the error 'IXFR0004 - No transactions found to process'. But if i query the invoices for the period, in those screens it clearly states 'Transfer to Sender as No'
What may be the reason?
Miranga

Please review (FRM-99999: Invoking the Intercompany Account Transfer Program [ID 1071882.6]) and see if it helps. If you still have the same issue, please log a SR.
Thanks,
Hussein

Similar Messages

Transfer ID failed with LUM errors

I have 4 netware servers to migrate to OES2. One was completed successfully using Transfer id a few weeks ago. This weekend I attempted another.
The last part of the transfer id failed with LUM errors that it couldnt access lum objects admingroup, www etc. As we have had one successful migration these objects do exist in the tree and are lum enabled. The /etc/nam.conf was modified prior to starting the transfer id to point to the ldap server with the master replica. I did create too many projects which I think caused me the lum errors which I couldn't get past. With the source server turned off I followed a TID dated 2009 for this LUM error and modified the unix object which had been created to be members of the groups it required, (luckily I had the previously migrated server unix object to compare to) quit the migration software and rebooted the server and then ran ndsrepair. No errors. I did not migrate any services.
Further investigation revealed errors relating to obtaining the SSLCert but it has not expired and despite the cant get it messages the files .der and .pem appeared in the correct folders on the target server. I did copy the .der file to the required location naming it with the ipaddress as per manual instructions. The target server now has a case of dual identity. The nss volumes are mounted ok and the users can map drives using the source server name but the Suse Linux server still thinks that its the pre-migration server when I run a terminal session. Ifconfig shows the correct source server ip. Consoleone is another story. The volume objects are the old ones and the new ones with pools are not showing. From the users viewpoint it works.
Before I do more damage can someone please point me in the right direction. The target name did change to the source before the restart so therefore I should just need to do the hostname rename manually. Should I start at step 7 in the manual instructions in an attempt to fix this server or should I abandon it and start again?

$(UKevin
This defect will make into the next OES2SP2 Patch (post September). We didn't have enough time for QA to regress the fix for September Patch.
-Ramesh
>>>
From:
kjhurni<[email protected]>
To:
novell.support.open-enterprise-server.migration
Date:
10/05/2010 09:06 PM
Subject:
Re: Transfer ID failed with LUM errors
Great, thanks!
As I mentioned previously, we DID find a bug about 3 weeks ago with LUM
repairfailing during the "group" (admingroup). We do have a field
patch for it, but obviously it's not made it into the channel yet.
So if you DO still have that problem, you should probably ask for the
patch (it's one file).
The defect #635574
Should help them reference the bug and get the patch for you.
I'm not sure when it will be released into the patch channel.
Not to say this fixes any and all LUM problems but since we have that
patch, we've not had any issues with the remaining OES2 SP2 64-bit
servers we've done with ID Transfer.
kjhurni
kjhurni's Profile: http://forums.novell.com/member.php?userid=734
View this thread: http://forums.novell.com/showthread.php?t=422454

Custom concurrent program failing with Signal 6 error

Custom concurrent program failing with the below error ,
stat_low = 6
stat_high = 0
emsg:was terminated by signal 6
Enter Password:
# An unexpected error has been detected by HotSpot Virtual
Machine:
# SIGSEGV (0xb) at pc=0xf608fd7e, pid=16054, tid=3417308016
# Java VM: Java HotSpot(TM) Server VM (1.4.2_14-b05 mixed mode)
# Problematic frame:
# C [libca.so.0+0x2dd7e] caupzsearch+0x1e
Help needed to debug this error.
Regards,

Please post details of application release, database version and OS.
Is the issue with one specific custom concurrent program? What is the type of this CP? Has this ever worked?
Please enable trace/debug as per (How To Trace a Concurrent Request And Generate TKPROF File (Doc ID 453527.1)) and see if more details are collected in the log then.
Thanks,
Hussein

Intercompany transfer for material with item category Erla

Hi,
I have a typical requirement.
I am creating a value pack(finish good) with item category mainatined as ERLA(while mat master creation) which consistes of 2 items.
I have maintained a BOM for this value pack(finished material).
Since ERLA is maintained,I can explode BOM in Sales Order creation(correct me if I am wrong)
This is okay for sales cycle.
I have following requirement
I want to do a Intecompany stock transfer of this value pack(i.e. finish good) with doc type NB.
The problem in this is that it gives error while creating outbound delivery stating some entries missing in table (do not exactly remember)for NLCC/DOGN.. something like that.
If anyone has done this type of scenario earlier then request you to send me the configuration settings required to be done in terms of Item category/Delievry combination etc etc .
This is quite urgent for me.
If there is any different way to map this Intecompany Stock Transfer of Material (with Item category maintained as ERLA) then please let me know.
Thanks in advance.
Regards,
manOO

Hi
You maintain "Item category group" NORM in the Sales org 2 tab, this is used for sales organisation and distribution channel for Outboumd delivery.
The "General Item category group" does not refer to the Sales organisation and distribution channel, this is used for Inbound delivery.
In can create the material master in MM01, specify the "Material type" and "Industry sector" .
For, Item category determination in VOV4, you need to assign like this as below,
Sales doc type + Item category group + usage + Item category of higher level item = Item category.
Item category determination for free item,
OR + NORM + FREE + TAN = TANN.
As beacuse you are giving the normal material as free, therefore you must give the indication to the system to use it as free material by specifying the usage as "FREE".

Email bursting program fail with java null exception

Hi All,
I am trying to use xml publisher email bursting program on 11i (11.5.10.2) but getting following error.
XML/BI Publisher Version : 5.6.3
--Exception
null
java.lang.NullPointerException
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.getSystemTempDirectory(JCP4XDOBurstingEngine.java:433)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:114)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
Got solution for this. It was temp directory setting and i did
Ran program but failed again with following details
XML/BI Publisher Version : 5.6.3
Updating request description
Retrieving XML request information
Preparing parameters
Set Bursting parameters..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=3102217,
user-variable:cp:language=en,
user-variable:cp:responsibility=21708,
user-variable.OA_MEDIA=http://beckett.teknobit.com:8006/OA_MEDIA,
burstng-source=TBS,
user-variable:cp:DebugFlag=N,
user-variable:cp:parent_request_id=3102217,
user-variable:cp:locale=en-US,
user-variable:cp:user=RAVI,
user-variable:cp:application_short_name=XDO,
user-variable:cp:request_id=3104098,
user-variable:cp:org_id=82,
user-variable:cp:reportdescription=TBS Service Sales Quote}
Start bursting process..
Thanks to all.
I am all set.
Thanks
Ravi Tripathi
Edited by: Ravi Tripathi on Oct 16, 2009 8:25 AM
Edited by: Ravi Tripathi on Oct 16, 2009 8:56 AM

Set eh temp directory in Xmlp responsibility Admin tab, properties or in Java program.

Oracle 8i Lite program fails with JDev 3.1.1.2, on Win95

"C:\Program Files\Oracle\JDeveloper 3.1.1.2\java1.2\jre\bin\javaw.exe" -mx50m -
I'am having problems running my program with the latest JDeveloper 3.1.1.2. It worked fine with JDeveloper 3.1. I get an unsatisfiedLinkError which indicates that it can't find the native dll libraries. But I did everything written in the instructions. Patched the jdeveloper.ini file and add the path as a parameter to the project.
See for results below.
Hopefully anyone can help.
classpath "D:\DATA\JavaSrc\Classes;C:\Program Files\Oracle\JDeveloper 3.1.1.2\lib\jdev-rt.zip;C:\orawin95\LITE\CLASSES\Olite40.jar;C:\Program Files\Oracle\JDeveloper 3.1.1.2\java1.2\jre\lib\rt.jar" Stock.StockReader -Djava.library.path=C:\ORAWIN95\BIN
java.lang.UnsatisfiedLinkError: exception occurred in JNI_OnLoad
Exception in thread main
Kind Regards
Jan Boersma.

I found the problem.
Do not install the PATCH for Oracle 8i Lite on Windows 95, because it's really meant for NT. The PATCH caused the problem.

ORA-27369: job of type EXECUTABLE failed with exit code: Incorrect function

Hello,
I am calling a windows bat file using dbms_scheduler and getting the following error. I have searched the forum and the internet and tried different switches and options. None of them solved my problem.
Oracle Version: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
OracleJobScheduler is running as a service
Error starting at line 1 in command:
execute GET_RESULTS();
Error report:
ORA-27369: job of type EXECUTABLE failed with exit code: Incorrect function.
ORA-06512: at "SYS.DBMS_ISCHED", line 185
ORA-06512: at "SYS.DBMS_SCHEDULER", line 486
ORA-06512: at "PS.GET_RESULTS", line 67
ORA-06512: at line 1
27369. 00000 - "job of type EXECUTABLE failed with exit code: %s"
*Cause:    A problem was encountered while running a job of type EXECUTABLE.
The cause of the actual problem is identified by the exit code.
*Action:   Correct the cause of the exit code and reschedule the job.
Here is the code for scheduler
      dbms_output.put_line(os_commandline || utlPath || fileSeparator || 'get.bat >nul')
      dbms_scheduler.create_job
      (   job_name          =>'PS_GET_RESULTS'
            , job_action        => os_commandline || utlPath || fileSeparator || 'get.bat >nul'
            , job_type          =>'executable'
            , enabled           =>false
            , auto_drop         =>false
            , start_date        =>systimestamp
      dbms_scheduler.run_job(job_name =>'PS_GET_RESULTS');The dbs_output prints a line which shows that the parameters os_commandline, utlPath and fileSeparator are set correctly.
     C:\windows\system32\cmd.exe /q /c E:\UTLDir\get.bat >nulThe windows file (get.bat) is:
     "C:\Program Files (x86)\WinSCP\Winscp.exe" /script=e:\utldir\get_resultsThis batch file passes a script file to the executable winscp.exe to get files from another server.
The script file (get_results) is:
     option batch abort
     option confirm off
     open sftp://username:password@ipnumber:port -hostkey="ssh-rsa 1024 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
     cd /usr/dropbox/
     option transfer binary
     get *.results E:\UTLDir\Results\
     close
     exitI tested the batch file directly and works fine and "gets" the files from the server. But, invoking from Oracle dbms_scheduler fails with ORA-27369: job of type EXECUTABLE failed with exit code: Incorrect function.
Appreciate your help and time in suggesting additional guidelines or pointers.
Thanks,
Rose

Here is an update, if somebody else is having a similar problem.
The ftp command "cd" to change the directories should be an absolute path. I was given a path "/usr/dropbox/", but on the server it actually corresponds to "/usr/local/apps/dropbox/". After updating the directory path, the scheduler worked fine in invoking the batch file for transferring the files.
Thanks,
Rose

Plz.. Help me..... Concurrent program ended with errored.

hi alll....
I am on working on Oracle Audit trail for mtl_system_item_b (ie. whenever item is changed, created or deleted , i want to track the data, who delete that item and wat item). I followed the below steps to perform that.
Steps 1:
sysadmin ->Security : AuditTrail->install. I checked weather audit trail is enabled for oracle inventory (ie, in screen i query for inv under oracle username tab and checked weather enabled box is checked).
Steps 2:
Creation of Audit group
navigation : AuditTrail ->Groups.
Application Name: Oracle Inventory
Audit Group: XX inventory
Group State: Enabled
I added audit tables to this group
User Table Name: MTL_SYSTEM_ITEMS_B
Steps 3:
After creation of audit group i run the Concurrent program “*AuditTrail Update Tables*” . It has no parameter..
The request is ended with errored when i ran. Plz help me... Its urgent.
I checked with log file too. It has so many page. finally it displaying
fatal error in fdasql,quitting...
fatal error in fdacv,quitting...

Hi,
Search the log file for more details about the error.
You may also review these documents and see if it helps.
Note: 353326.1 - Audittrail Update Tables : Fatal Error In Fdasql,Fdacv,Fdaupc When Create View
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=353326.1
Note: 563116.1 - AuditTrail Update Tables Program Fails with "Fatal error in fdasql, quitting..."
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=563116.1
Regards,
Hussein

Worker failed with patch 3480000

Dear All,
Please worker failed during patch 3480000 as following:
H:\oracle\prodappl\fnd\11.5.0\bin\CONCSUB.exe &ui_apps SYSADMIN 'System Administrator' SYSADMIN CONCURRENT FND FNDGSCST ALL 10
Error:
Program exited with status 3
Cause: The program terminated, returning status code 3.
Action: Check your installation manual for the meaning of this code on this operating system.Please enter a valid responsibility. The responsibility System Administrator does not exist or is not active. Check that the correct application short name is specified for your responsibility.
Please advise
Tarek

Hussein,
Following is part of worker log file:
Time when worker completed job: Fri May 20 2011 09:50:06
Evaluating symbolic arguments ....
Done evaluating symbolic arguments.
Time when worker started job: Fri May 20 2011 09:50:06
Start time for file is: Fri May 20 2011 09:50:06
H:\oracle\prodappl\fnd\11.5.0\bin\CONCSUB.exe &ui_apps SYSADMIN 'System Administrator' SYSADMIN CONCURRENT FND FNDGSCST ALL 10
Error:
Program exited with status 3
Cause: The program terminated, returning status code 3.
Action: Check your installation manual for the meaning of this code on this operating system.Please enter a valid responsibility. The responsibility System Administrator does not exist or is not active. Check that the correct application short name is specified for your responsibility.
AD Worker error:
The above program failed with error code 3.
See the AD Worker log file and/or the program log file for details
Thanks,
Tarek

Synchronize WF LOCAL tables in R12 failed with error :ORA-14501 object is

Hi All,
In our R12 enviroment "Synchronize WF LOCAL tables" conc program failing with :ORA-14501 object is not partitioned.
Tried solution as per doc id . 433280.1 -- Partitions in Workflow Local Tables are Automatically Switched to NOLOGGING . But no success.
Please help.

Hi Hussein,
Thanks for reply. Please find the below details.
RELEASE_NAME
12.1.3
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Linux **** 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
Conc Req Log file
Application Object Library: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDWFLSC module: Synchronize WF LOCAL tables
Current system time is 19-JUN-2012 05:49:20
**Starts**19-JUN-2012 05:49:20
**Ends**19-JUN-2012 05:49:20
ORA-14501: object is not partitioned
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
Finished executing request completion options.
Concurrent request completed
Current system time is 19-JUN-2012 05:49:20
---------------------------------------------------------------------------

RfcOpenConnection() fails with RFC_COMMUNICATION_FAILURE

Hi,
We are facing the below problem in our client's environment:
The RFC server program fails with the failure of RFC API RfcOpenConnection() with error message
RFC_COMMUNICATION_FAILURE and errorInfo.message as
LOCATION    SAP-Gateway on host wbaurs12 / sapgw01
ERROR       partner '204.140.2.210:sapgw01' not reached
TIME        Tue Jun 30 12:11:44 2009
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       78
ERRNO TEXT Connection timed out
COUNTER     2
Can someone point us what could be the problem here?
Thanks in advance
Poornima.K

Hi Tiago,
Thanks for the reply.
I tried the commands you gave me and i am getting the following messages:
1) niping -c -H 204.140.2.210 -S 3301
        Thu Jul 09 09:26:07 2009
***LOG Q0I=> NiPConnect2: connect (10060: WSAETIMEDOUT: Connection timed out) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1900
    (SI_ECONN_REFUSE/10060; I4; ST; 204.140.2.210:3301) [nixxi.cpp    2823]
ERROR => NiTClientLoop: NiHandle (rc=-10) [nixxtst.cpp 2839]
ERROR       partner '204.140.2.210:3301' not reached
TIME        Thu Jul 09 09:26:07 2009
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER     1
2) niping -c -H 204.140.2.210 -S sapgw01
                Thu Jul 09 09:25:39 2009
***LOG Q0I=> NiPConnect2: connect (10060: WSAETIMEDOUT: Connection timed out) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1900
    (SI_ECONN_REFUSE/10060; I4; ST; 204.140.2.210:3301) [nixxi.cpp    2823]
ERROR => NiTClientLoop: NiHandle (rc=-10) [nixxtst.cpp 2839]
ERROR       partner '204.140.2.210:sapgw01' not reached
TIME        Thu Jul 09 09:25:39 2009
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER     1
Can you please let me know what is the cause of the above messages?
Thanks in advance,
Poornima.K

Approval task SP09: Evaluation of approvalid failed with Exception: while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'aValue'

Hi everyone,
I just installed SP09 and i was testing the solution. And I found a problem with the approvals tasks.
I configured a simple ROLE approval task for validate add event. And when the runtime executes the task, the dispatcher log shows a error:
ERROR: Evaluation of approvalid failed with Exception: while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'aValue'
And the notifications configured on approval task does not start either.
The approval goes to the ToDO tab of the approver, but when approved, also the ROLE stays in "Pending" State.
I downgraded the Runtime components to SP08 to test, and the approvals tasks works correctly.
Has anyone passed trough this situation in SP09?
I think there is an issue with the runtime components delivered with this initial package of SP09.
Suggestions?

Hi Kelvin,2016081
The issue is caused by a program error in the Dispatcher component. A fix will be provided in Identity Management SP9 Patch 2 for the Runtime component. I expect the patch will be delivered within a week or two.
For more info about the issue and the patch please refer to SAPNote 2016081.
@Michael Penn - I might be able to assist if you provide the ticket number
Cheers,
Kristiyan
IdM Development

Failed to execute custom transfer program

I have already looked at the custom transfer transport thread
I checked all the parameter but still failing
If anybody has done this before
Please let me know what kind of transfer program uses
and the configurations
specially the custom transfer arguments
This is the trace file
880 1996 FIL-052031 3/2/2010 3:33:21 PM |Data flow DF_Info_SAP
880 1996 FIL-052031 3/2/2010 3:33:21 PM Failed to execute the custom transfer program <C:\temp\psftp.exe harmp001 ****** tlsrv003.com
880 1996 FIL-052031 3/2/2010 3:33:21 PM $AW_SAP_WORKING_DIR prm_Info.dat
tls\LANDING\>. Its return code and error message are <rc =
880 1996 FIL-052031 3/2/2010 3:33:21 PM 1. Error message: PuTTY Secure File Transfer (SFTP) client Release 0.60 Usage: psftp [options] [user@]host Options:    -V
880 1996 FIL-052031 3/2/2010 3:33:21 PM print version information and exit    -pgpfp    print PGP key fingerprints and exit    -b file   use specified batchfile    -bc
880 1996 FIL-052031 3/2/2010 3:33:21 PM output batchfile commands    -be       don't stop batchfile processing if errors    -v        show verbose messages    -load
880 1996 FIL-052031 3/2/2010 3:33:21 PM sessname Load settings from saved session    -l user   connect with specified username    -P port   connect to specified port
880 1996 FIL-052031 3/2/2010 3:33:21 PM -pw passw login with specified password    -1 -2     force use of particular SSH protocol version    -4 -6     force use of
880 1996 FIL-052031 3/2/2010 3:33:21 PM IPv4 or IPv6    -C        enable compression    -i key    private key file for authentication    -noagent disable use of
880 1996 FIL-052031 3/2/2010 3:33:21 PM Pageant    -agent    enable use of Pageant    -batch    disable all interactive prompts>.
5404 2444 FIL-052031 3/2/2010 3:33:21 PM |Data flow DF_Info_SAP

Did you try using psftp manually from a dos prompt?

TS1424 Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url" After this occured a few times I reset the id password, and this was confirmed by email. It still fails with same message. I

Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url" After this occured a few times I reset the id password, and this was confirmed by email. It still fails with same message. Ideas?

Hi, you have to logout from your iTunes account and reconnect it:
Settings / iTunes & App Stores / ...
https://mobilfunkexperten.de/news/13450/sporadische-probleme-im-itunes-und-app-s tore
Hope this helps... :-)

I ran an iTunes update. It failed with the message System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem. I tried reinstalling but get the same message.

I ran an iTunes update. It failed with the message "System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem." I tried reinstalling but get the same message. I looked in my Recycle Bin for that file name but there is none there. Is this a new file that iTunes wants?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683)

Invoking 'Intercompany Transfer' program fails with IXFR0004

Similar Messages

Maybe you are looking for