Io_getevents timed out 600 sec
We have one server with OEL5.5 and two oracle databases 10.2.0.4. We are using nfs for the databases. There were no errors about a long time.
Both of these databases hung on weekend after an automatic restart with the same error for 12 hours, no connection possible:
Fri May 20 21:18:39 2011
Completed: ALTER DATABASE OPEN
Fri May 20 21:29:13 2011
WARNING:io_getevents timed out 600 sec
Fri May 20 21:29:14 2011
WARNING:io_getevents timed out 600 sec
Fri May 20 21:39:13 2011
WARNING:io_getevents timed out 600 sec
Fri May 20 21:39:14 2011
WARNING:io_getevents timed out 600 sec
Fri May 20 21:49:13 2011
WARNING:io_getevents timed out 600 sec
Fri May 20 21:49:14 2011
After 12 hours both databases are online back again without doing anything.
In my opinion (and with the help of metalink) i think this is os- and not db-related, but there an no errors at all on os level (/var/log/messages). Ideas?
Thank you!
Then it's really strange. How about a problem with the network, if the network was involved? If there was some network congestion it may not necessarily show up as an error in the NFS logs. Are you managing the network? From my experience, If you have a fancy network and i.e Cisco equipment, administrators often like to play around on weekends and evenings or during other system maintenance windows, not necessarily informing since it is not supposed to interfere. Of course the problem could also be with your systems or the NFS server you mentioned. I would leave the problem for now and monitor the next system restart to see if it happens again. If it does, then you have more options to analyze and troubleshoot, e.g. power reset.
Edited by: Dude on Jun 7, 2011 2:31 AM
Similar Messages
-
WARNING: io_getevents timed out 600 sec
We are facing this error frequently, please let us know what is the reason and resolution for this
WARNING:io_getevents timed out 600 sec
Oracle : 10.2.0.4 production
OS : RHEL 4.7
Thanks in advance..we upgraded DB version to 10.2.0.5. after that did not find previous error.
Oracle : 10.2.0.5 production
Thanks
@anto -
when i try to update my ipod to lion it says that my connection has timed out the sec it should have worked what should i do?
You can try disabling your computer's security software or doing a manu install using the instructions here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch -
Unable to download Firefox application. After 30 sec. operation timed-out
Due to problems with IE I was advised to try Firefox, but when I try to download it, after about 30 sec. I get a message that operation timed-out. I'd like to get the application on a CD if possible?
Hi louiserb, and a warm welcome to the forums!
Generally, that bad img thing is either RAM, or problems with the HDD.
Failure of APPs to open is likely Permissions problems or incomlete installs.
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
Let us know where you are after that. -
'500 Connection timed out' Error in Sender SOAP Scenario
Hi mates,
I exposed o/b synch MI as a webservice. This webservice is received by a BPM and it triggers an IDOC generation program on R/3. BPM waits & collects the IDOCs and cosntructs the response from these IDOCs and returns it to the webservice caller.
I'm making the SOAP call from a client program and I get the correct response in some cases where the data requested is not huge...normally with in 30 sec.
But in some cases I get the error '500 Connection timed out' after 60 sec. The detailed message is as follows.
<i>500 Connection timed out
Connection timed out (-5)
Error: -5
Version: 6040
Component: ICM
Date/Time: Thu Jun 15 17:06:10 2006
Module: icxxthr_mt.c
Line: 2551
Server: hcidx1_DX1_03
Detail: Connection to partner timed out after 60s</i>
My BPM waits for 10 minutes and I set the parameter XI.Timeout to 600000 (i.e. 10 minutes) in module parameter table for the sender SOAP adapter as per the note 856597. And in SXMB_ADM, I set the parameter CHECK_FOR_ASYNC_RESPONSE_TIMEOUT of category SA_COMM to 600. In my client program, I set the timeout as 1 hour. All these config params are supposed to make sure that all the components involved wait for atleast 10 mins before they timeout.
But I get timeout after 60 sec. Whats wrong/missing?
I highly appreciate your inputs.
thx in adv
praveenHey Praveen,
<i>I'm making the SOAP call from a client program and I get the correct response in some cases where the data requested is not huge...normally with in 30 sec.
But in some cases I get the error '500 Connection timed out' after 60 sec. The detailed message is as follows.</i>
does this mean you are getting some response in some cases where u r payload is small , and if its large ur getting some timeout like this? Also is ur scenario Sync / Async?
Assuming i understood correctly , i came a similar situation but that has to do some thing with Paging file / memory issues when the files are too huge and no. of users are high please let me know if this is the case.
best regards
Vara
[PLEASE REWARD FOR POSTING] -
We have an OLTP db server with oracle 11g(11.1.0.7) installed on Linux 64bit OS.
Client : Dotnet application running on win2003 server
oracle client version on webServer 9.2.0.4
Work load on system is
Avg Executions Per Sec 1273.35
Avg Executions Per Txn 42.1
Avg Response Time Per Txn (secs) .13
Avg User Transaction Per Sec 30.4
Avg Concurrent Sessions on server 350 processes 600
memory_target 13gb
we are experiencing "ORA-12535: TNS:operation timed out" while users access the application from webserver.per day around 200 errors.
To get rid of the above error we set SQLNET.INBOUND_CONNECT_TIMEOUT=0 in server side sqlnet.ora and
in Listener.ora inbound_connect_timeout=120 but of no use, even we observed for few days with inbound_connect_timeout=0.
There is Only one listener configured on server.
The similar set up with lesser workload working fine without any errors.
Please let me know your thoughts....
--Pandey
Edited by: user12204025 on Feb 10, 2010 8:14 AM
Edited by: user12204025 on Feb 12, 2010 2:52 PMBut I am seeing this errors in listener alert file.
<msg time='2010-02-15T15:55:37.734-06:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='hostname.domainname'
host_addr='127.0.0.1'>
<txt>15-FEB-2010 15:55:37 * 12502
</txt>
</msg>
<msg time='2010-02-15T15:55:37.734-06:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='hostname.domainname'
host_addr='127.0.0.1'>
<txt>TNS-12502: TNS:listener received no CONNECT_DATA from client
</txt>
</msg>
and in alert log file below entry...
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 15-FEB-2010 02:46:21
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 110
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=gatewayip)(PORT=4804))
please let me know your thoughts..... -
Hello,
I receive a 500 Connection timed out error.
I know that there are some threads to this error but I can´t find a solution for us.
This is the error description:
Error: -5
Version: 7000
Component: ICM
Date/Time: Tue Mar 04 07:02:38 2008
Module: icxxthr.c
Line: 2698
Server: crmprod_CRP_01
Error Tag: {-}
Detail: Connection to partner timed out after 60s
Now I have found in this forum some information about the parameters icm/keep_alive_timeout, icm/conn_timeout and icm/server_port_*
Our settings for this parameters are:
icm/server_port_0 = PROT=HTTP,PORT=8001
icm/server_port_1 = PROT=SMTP,PORT=25
icm/keep_alive_timeout (sec.) = 600
icm/conn_timeout (msec.) = 5000
Can someone please explain me which parameters occurs this error and which parameters I can change that the connection time is longer than 60 seconds?
Where can I change the parameters?
Regards
PhilippHi,
Parameter icm/conn_timeout
icm/conn_timeout is used to set the timeout when setting up the connection. If the timeout is exceeded, an error page is generally displayed with the information "404 Resource not found" "Partner not reached".
Therefore, exceeding the icm/conn_timeout does not lead to a "500 Connection timed out" error message.
Processing timeout and keepalive timeout
The icm/keep_alive_timeout and icm/server_port_< n > parameters define the keepalive timeout and the processing timeout.
ICM distinguishes between these two types of timeout.
The processing timeout is the timeout between the HTTP request being issued and the HTTP response being received.
If the ICM is used as a server for the relevant HTTP request (in other words, when it forwards an incoming request to the SAP Web Application Server), the processing timeout is the time that the ICM will wait until a response is received from the SAP Web Application Server (ABAP or J2EE). This interval may be exceeded with long-running applications in ABAP or the J2EE engine. If the processing timeouts are exceeded, the ICM sends the client an HTTP response with the error code "500 Connection timed out".
If the ICM serves as a client for the relevant HTTP request (that is, when it forwards outgoing requests from the SAP Web Application Server), the processing timeout is the time that the ICM waits until a response is received from the network. This interval may also be exceeded in the case of long-running applications in the network.
The keepalive timeout specifies how long the network should remain open after a request has been processed successfully so that the TCP/IP connection does not have to be reestablished if additional requests are received.
When you set the keepalive timeout, this does not normally lead to timeout errors. You should set the keepalive timeout high enough that the connection does not have to be reestablished for requests that are sent within a short time of each other, but low enough that the number of unused open TCP/IP connections is not unnecessarily high. Exceeding the Keepalive timeout should never cause an error.
Configuration of the ICM parameters for the processing timeout and the keepalive timeout
For the ICM, the parameters mentioned here are in the instance profile.
The processing timeout is set for individual services with the following parameter:
icm/server_port_ < n > = ...,PROCTIMEOUT=< s >.
The keepalive timeout can be set globally for all services of the ICM with the parameter icm/keepalive_timeout.
You can also set it for individual services by using the following parameter:
icm/server_port_ < n > = ...,TIMEOUT=< s >.
If you set this parameter, it overwrites parameter icm/keepalive_timeout for the specified service.
Even if the ICM serves as client for a request, the TIMEOUT and PROCTIMEOUT parameters of icm/server_port_ < n > control the timeouts for the relevant protocol, provided that you have set TIMEOUT or PROCTIMEOUT.
If you have not set the PROCTIMEOUT parameter, TIMEOUT (or icm/keepalive_timeout) defines both the processing timeout and the keepalive timeout. Also, as of release 6.40, the keepalive timeout is limited to a maximum of 30 seconds.
In a system where the default timeout settings of 30 seconds for the keepalive timeout and the processing timeout are not sufficient because of long-running applications, we recommend that you set the TIMEOUT and PROCTIMEOUT parameters for the relevant services so that you can configure them independently of each other. In addition, we recommend that you do not set the TIMEOUT value higher than necessary, for example, to the usual default value of 30 seconds.
We recommend, for example, the following settings:
icm/server_port_0 = PROT=HTTP,PORT=1080,TIMEOUT=30,PROCTIMEOUT=600
to allow a maximum processing time of 10 minutes.
I hope this info will help you to sort out the error you getting.
Regards
Aashish Sinha
PS : reward points if helpful -
[SOLVED] Issue with eth0 (eth0: timed out)
Hi there people, just installed Arch on my PC (again). The first time I had no problems with this, but now it is really bothering me. Well, my PC only access the net via wireless, so I have no wired connection for it. Here's my /etc/rc.conf:
# /etc/rc.conf
eth0="dhcp"
wlan0="dhcp"
wlan_wlan0="wlan0 essid MySpot key ABCDEFABCDEF1234567ABCDEFC"
INTERFACES=(eth0 wlan0)
Well, everything is working fine, I can get access to the internet on bootup. My only concern is that my system is taking awfully long to boot. It takes about 1-2 minutes on "::Starting Network", then it shows me "eth0: timed out". Then it takes about 10 secs to start my wlan0 interface and the system finishes booting. I had previously installed Arch 2008.12, and the Starting Network only took about 10 secs to start my wlan0. I have already tried commenting out the eth0 line and putting a ! in front of eth0 on INTERFACES, but doing that only shows me an error message for my wlan0 and render my internet unusable on system bootup. So, my questions are:
1) Do I really need the eth0 interface for my connection (since I'm using wlan0 for wireless connection) ? Why can't I comment it out?
2) If I really need eth0, how can I make my boot time go faster, or how can I make it not time out?
Thanks in advance for any help given...
EDIT: problem solved, see Post 8 below for answers...
Last edited by gabscic (2009-03-25 03:40:43)Thanks for answering. Well, I think eth0 is being detected correctly. Here is the output for ifconfig:
eth0 Link encap: Ethernet Hwaddr 00:18:F3:87:97:41
UP BROADCAST MULTICAST MTU: 1500 Metric: 1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:19
lo Link encap: Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU: 16436 Metric: 1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wlan0 Link encap: Ethernet Hwaddr 00:15:AF:09:BC:E7
inet addr: 192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU: 1500 Metric: 1
RX packets:1903 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:615024 (606.6 Kb) TX bytes:1020 (1020.0 b)
wmaster0 Link encap: UNSPEC Hwaddr 00-15-AF-09-BC-E7-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU: 1500 Metric: 1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Well, I hope that can help. Searched the net and the forums, and every problem related to this is with people who are actually trying to use the eth0 interface for connection. In my case, I don't think I need it, I only need the wlan0. What I'm trying to do is get rid of eth0 while letting wlan0 work. -
Tnsping timed out using dg4odbc from Oracle to MYSQL through ODBC
Hi,
I encountered problem when trying to connect from Oracle to MYSQL using dg4odbc, hope you can shed some light
Oracle database is 11.1.0.7 on SUSE Linux 64-bit.
Since the application which runs on MYSQL DB only offers ODBC driver on Windows platform, so I installed the 32-bit ODBC driver (from ServiceNow) on a 32-bit windows server (driver download from http://wiki.service-now.com/index.php?title=ODBC_Driver) .
created system DSN: MYSQLDEV, The DSN connection works fine. I then installed Oracle 11.2.0.1 gateway for ODBC 32-bit on the same windows server, the following configurations were done:
On 32-bit Windows server:
in gatewayHome\hs\admin
initMYSQLDEV.ora:
# HS init parameters
HS_FDS_CONNECT_INFO = MYSQLDEV
HS_FDS_TRACE_LEVEL = DEBUG
in gatewayHome\network\admin:
listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = abcdes.sda.sdva.com)(PORT = 1521))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=MYSQLDEV)
(ORACLE_HOME=C:\product\11.2.0\tg_1)
(PROGRAM=dg4odbc)
ADR_BASE_LISTENER = C:\product\11.2.0\tg_1
stop and started listener on windows server and check listener status
C:\product\11.2.0\tg_1\bin>lsnrctl status listener
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-MAR-2012 21:42:08
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=abcdes.sda.sdva.com)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 29-MAR-2012 21:11:36
Uptime 0 days 0 hr. 30 min. 32 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\product\11.2.0\tg_1\network\admin\listener.ora
Listener Log File c:\product\11.2.0\tg_1\diag\tnslsnr\abcdes\list
ener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=abcdes.sda.sdva.com)(PORT=1521)))
Services Summary...
Service "MYSQLDEV" has 1 instance(s).
Instance "MYSQLDEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
On Linux server where Oracle DB resides.
Added the following tns entry "jelly" on the Linux server ORACLE_HOME/network/admin:
jelly =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP)
(HOST=abcdes.sda.sdva.com)
(PORT=1521))
(CONNECT_DATA=(SID=MYSQLDEV))(HS=OK)
tnsping from Linux server (64-bit) failed with timeout error:
tnsping jelly
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 29-MAR-2012 21:12:38
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP) (HOST=abcdes.sda.sdva.com) (PORT=1521)) (CONNECT_DATA=(SID=MYSQLDEV))(HS=OK))
TNS-12535: TNS:operation timed out
tnsping from Windows server works fine: (added same tnsnames entry on windows server for testing purpose only)
C:\product\11.2.0\tg_1\bin>tnsping jelly
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-MAR-2
012 21:45:20
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\product\11.2.0\tg_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=abcdes.sda.sdva.com)(PORT=1521)) (CONNECT_DATA=(SID=MYSQLDEV)) (HS=OK))
OK (20 msec)
if listener is not listening to the service, then the tnsping on the windows server should fail as well.
I don't know why only the tnsping from Linux failed, is it due to the 32-bit ODBC uncompatibility with 64-bit oracle server? or my configuration problem?
Of course, when I created the DB link from oracle, the connection failed with
create database link mysqldev connect to xxxx identified by "xxxxx" using 'jelly';
Database link created.
select * from tab1;
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from MYSQLDEV
Thanks for your help,Hi Mike,
This is part of the tnsping.trc file which contains the error. IP address is in the tnsnames entry with this tnsping.
nsopen: opening transport...
nttcon: entry
nttcon: toc = 1
nttcnp: entry
nttcnp: creating a socket.
nttcnp: exit
nttcni: entry
nttcni: Tcp conn timeout = 0 (ms)
nttcni: trying to connect to socket 5.
ntt2err: entry
ntt2err: soc 5 error - operation=1, ntresnt[0]=505, ntresnt[1]=110, ntresnt[2]=0
ntt2err: exit
nttcni: exit
nttcon: exit
nserror: entry
nserror: nsres: id=0, op=65, ns=12535, ns2=12560; nt[0]=505, nt[1]=110, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsopen: unable to open transport
nsiocancel: entry
nsiofrrg: entry
nsiofrrg: cur = 53b9f8
nsbfr: entry
nsbaddfl: entry
nsbaddfl: normal exit
nsbfr: normal exit
nsiofrrg: exit
nsiocancel: exit
nsvntx_dei: entry
nsvntx_dei: exit
nsopenfree_nsntx: nlhthdel from mplx_ht_nsgbu, ctx=53a7e0 nsntx=53ade0
nsiocancel: entry
nsiofrrg: entry
nsiofrrg: exit
nsiocancel: exit
nsmfr: entry
nsmfr: 2712 bytes at 0x53ade0
nsmfr: normal exit
nsmfr: entry
nsmfr: 1528 bytes at 0x53a7e0
nsmfr: normal exit
nsopen: error exit
nscall: error exit
nscall: entry
nscall: connecting...
nsclose: entry
nsclose: normal exit
nladget: entry
nladget: exit
nsmfr: entry
nsmfr: 264 bytes at 0x528900
nsmfr: normal exit
nladtrm: entry
nladtrm: exit
nscall: error exit
nlse_term_audit: entry
nlse_term_audit: exit
Thanks, -
"Licensing timed out" when creating to Remote Desktop Connection
Our company have two site (SiteA and SiteB), both have its own DC (SiteA.xx.local and SiteB.yy.local). A Windows 2012 Server setup a Terminal Service. All SiteB user will use remote desktop to connect to the Terminal Server.
Sometime it will prompted an error "A licensing error occurred while the client was attempting to connect (Licensing timed out). Please try connecting to the remote computer again." Before this error message shown, the connection box
will show the status "Estimating connection quality" for a while (my last test this will stay for 2 min 30 sec. before Licensing timed out prompt).
When we face this error, the only way to solve it is to reboot the Terminal Server. Once reboot, everything will be fined, all user can connect again. But sometime later (no fixed time period, from two hours - two days), user
will then have this problem. But we need to reboot server again.
I can't found in what situation this error will happened. But we do experienced the following situation.
1. Sometime the a RDS Connection just stopped directly. Then try to reconnect but failed. In this case, all other users are still using it.
2. I try to unplug a network connection for a client, it show the connection is lost and trying to reconnect. After I plug the network back. Cancel the reconnect process. Then open the remote desktop again it will have the error.
3. there has two machine will never have this problem (we have this problem for 3 months). no matter how the connection lost. it can built up the connection once the connection is back
I followed some forum to enable the netlogon.log. On the Server, I found:
1. [MISC] [872] In control handler (Opcode: 4): This log must there when the problem happened.
Not sure if the following log help:
1. NetpDcGetName: SiteA.xx.local. using cached information ( NlDcCacheEntry = 0x000000DE96694D50 )
2.DsGetDcName function returns 0 (client PID=2088): Dom:SiteA Acct:(null) Flags: NETBIOS RET_DNS
3. NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c03ffff1
4. DsGetDcName function called: client PID=23532, Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS (I found some log will be Dom:SiteA install of Dom:(null) )
5. NlTimeoutApiClientSession: Unbind from server \\SiteA-DC.Stingmars.hk.local (TCP) 0.
6. NlPrintRpcDebug: Couldn't get EEInfo for I_NetLogonSamLogonEx: 1761 (may be legitimate for 0xc000006e)
On the Client side: Not sure if the log can help:
07/11 11:56:01 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: DS
07/11 11:56:01 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:01 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:01 [MISC] NetpDcGetName: SiteB using cached information
07/11 11:56:01 [MISC] DsGetDcName function returns 0: Dom:(null) Acct:(null) Flags: DS
07/11 11:56:01 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: FORCE DS
07/11 11:56:01 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:01 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:01 [MAILSLOT] Sent 'Sam Logon' message to SiteB[1C] on all transports.
07/11 11:56:01 [CRITICAL] NlBrowserSendDatagram: No transports available
07/11 11:56:01 [CRITICAL] NetpDcGetNameNetbios: SiteB: Cannot NlBrowserSendDatagram. (1C) 53
07/11 11:56:01 [MISC] NetpDcGetName: NetpDcGetNameNetbios returned 1355
07/11 11:56:01 [CRITICAL] NetpDcGetName: SiteB: IP and Netbios are both done.
07/11 11:56:01 [MISC] DsGetDcName function returns 1355: Dom:(null) Acct:(null) Flags: FORCE DS
07/11 11:56:02 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS
07/11 11:56:02 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:02 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:02 [MISC] NetpDcGetName: SiteB using cached information
07/11 11:56:02 [MISC] DsGetDcName function returns 0: Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS
07/11 11:56:03 [SESSION] V6 Winsock Addrs: fe80::bd63:1d49:d8fd:724%12 (1) V6WinsockPnpAddresses List used to be empty.
07/11 11:56:04 [MISC] NlPingDcNameWithContext: Ping response timeout for SiteB-DC.Stingmars.cn.local.
07/11 11:56:04 [CRITICAL] NlPingDcNameWithContext: Can't ping the DC SiteB-DC.Stingmars.cn.local.
07/11 11:56:04 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
Thanks
Kenneth LaiHi Kenneth,
Thank you for posting in Windows Server Forum.
Please check the setting and workaround as per below thread.
RDP connection hangs on "estimating connection quality"
http://social.technet.microsoft.com/Forums/en-US/18819bef-5c01-4849-9c61-afb7e8c8a581/rdp-connection-hangs-on-estimating-connection-quality?forum=winserverTS
In addition, also check below details.
Cause: If you are using Internet Protocol security (IPsec) to help protect traffic over TCP between clients and terminal servers, then packet fragmentation might occur. As a result, some packets might not reach their destination, and
client connections to terminal servers might fail.
Solution: Configure IPsec to help protect traffic over UDP rather than over TCP.
Hope it helps!
Thanks.
Dharmesh Solanki -
Request timed out because there has been no reply from the server in 600000
Issue:
Request timed out because there has been no reply from the server in 600000
Scenario:
1. All the crystal reports are designed by using Crystal Report 2008 Version -- 12.3.0.601
2. All reports are uploaded to CMC (SAP Business Objects Enterprise XI, Product: 12.1.0)
3. using Front-End .net Winform
4. Crystal Report is binding is done using Business View Manager (since having more than one databases)
5. Business View Manager Connects to Oracle using "Oracle Server" connection
6. Loading reports as follows
string queryString = string.Empty;
SessionMgr sessionMgr = new SessionMgr();
EnterpriseSession enterpriseSession = sessionMgr.Logon(userName, userPassword, serverName, authType);
EnterpriseService enterpriseService = enterpriseSession.GetService("InfoStore");
InfoStore infoStore = new InfoStore(enterpriseService);
enterpriseService = enterpriseSession.GetService("PSReportFactory");
Object psrfObject = enterpriseService.Interface;
PSReportFactory psReportFactory = (PSReportFactory)psrfObject;
queryString = "Select SI_CUID, SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS " + "Where SI_PROGID='CrystalEnterprise.Report' " + "And SI_ID=" + ReportId;
InfoObjects infoObjects = infoStore.Query(queryString);
InfoObject infoObject = infoObjects[1];
ReportDocument crDoc = new ReportDocument();
crDoc.Load(infoObject, enterpriseSession);
7. All the reports are getting loaded properly and i am able to dynamically set the report parameters
8. After executing report, some of the reports take more than 10 minutes, due to which shows following error
Request timed out because there has been no reply from the server in 600000
Note i have done following:
1. I have checked stored procedure running through oracle for more than 10 minutes (1 hr, 2 hrs)
2. Tried simply running crystal report without front-end running perfectly more than 10 minutes (1 hr, 2 hr)
3. When i run .net winform application for specific reports which takes long time, gives "Request timed out because there has been no reply from the server in 600000"
Also i have done lot much R&D and spent almost weeks to get resolution but not getting any solution out of it, please help me in this case
HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerClient SDKCorbaAdapterWaitReplyTimeout = 600000 and HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerInprocServerEnterpriseRequ
AS per following URL
Session timeout
1. Log into Central Management Console
2. Go to server,right click on Crystal report processing server and select properties,change the idle connection time out to 60 minutes
3. Also right click on crystal report cache server and select properties ,change the idle connection time out to 60 minutes
4. Restart Crystal Report Processing Server and Crystal Report Cache Server
5. Change the session time out to 60 minutes in web.xml of INfoviewApp,InfoViewAppAction,PlatformSerivces and CrystalReports.
6. Navigate to the following location
<BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppWEB-INF
7. Edit the web.xml in notepad and search for the below lines.
<session-config>
<session-timeout>20</session-timeout> <!-- 20 minutes for session objects -->
</session-config>
8. Increase the Session-Timeout parameter to 20 to 60 minutes in web.xml . Save this file
9. Repeat the same for the web.xml file in the InfoViewAppActions folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
10. Repeat the same for the web.xml file in the PlatformSerivces folder in <BO Install Dir>Business ObjectsTomcat55webappsPlatformSerivcesWEB-INF
11. Repeat the same for the web.xml file in the CrystalReports folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
12. Restart the tomcat server
Still i am getting same error, please help me, if you have any idea, clue with respect to this error on winformThis error is specific to RAS. The default CORBA request timeout is 10 minute = 600000 ms. When the RAS SDK does not get the reponse back from RAS server in 600000 ms it throws this message. Why it works in InfoView\CMC what I believe you refer to as "Front End' application is because InfoView\ CMC don't use RAS.
1. First make sure that a smaller report wich runs pretty fast ( 1-2 min) works. This will confirm that there is no connectivitiy issues between RAS and RAS SDK.
2. If you get the efrror for every single report, even the smaller ones, make sure the box running RAS and RAS SDK code( in case they are 2 different) can ping each other with IP, shortname and FQDN. If there is a firewall between them, the RAS port needs to be opened for bidirectional communication. By default RAS chooses a random port for communication with SDK but within CMC you can configure it to use a specific port and open it.
3. If the issue is specific only to reports that are long running, typically more than 10 minutes, then you need to inclease the CORBA timeout to a value more than what the reports typically would take to process. This is done on client code side or IIS in this case.
Here are the steps:
Make the following changes on the application server/system.
Open RegEdit by going to Start > Run and typing in regedit.exe. Then click Ok.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Client SDK\CorbaAdapter
Change the value of SendRequestTimeout(ms) to 100000.
Change the value of WaitReplyTimeout(ms) to 6,000,000 ms. The default value is 600,000 ms and may not be long enough.
Restart IIS by going to Start > Run and typing in iisreset. Then click Ok.
Retry the failing application.
See note: 1296656
This error should be easy to fix
Edited by: Aasavari Bhave on Feb 2, 2012 11:20 AM -
Error "Session Timed Out" When saving webi report as PDF
Hi,
I am getting below error when saving report as PDF
The Session Timed Out.The document *.wid has been auto saved in the Favorites~WebIntelligence Folder..Click Restore to retrieve it.
(ERROR : WIJ600001).
I get above error in PROD but works fine in DEV.
Version : BOE 3.1 SP7 (DEV & PROD).
Session Time out set as one hour.
Report runs for 3 minutes .once I get the data if I try to save it as PDF immediately I get the above mentioned Error.The default Webi auto-save is every 600 seconds, which is 10 minutes. You could increase it to 3600 seconds (1 hour) in CMC -> Applications > Web Intelligence > Properties > Auto-save Settings on "Auto-save time delay".
See KB 1297132 - Error: WIJ 60001 after the Web Intelligence Java Report Panel is left inactive some time on http://service.sap.com/sap/support/notes/1297132.
Hope this helps,
Jin-Chong -
Request timed out when purchasing music. Fresh install of Win7.
For the past couple months I have have not been able to purchase music off iTunes without first going into Add/Remove programs and doing a "Repair" to iTunes. Windows Firewall wasn't blocking anything from Apple and even with the firewall totally disabled I would still get the "Request timed out" error. And at the same time I'm getting these errors, a Podcast can be in the background downloading or I can be previewing a song! I eventually gave up and just figured its some random windows bug that isn't very common or its just another example of iTunes sucking for Windows and Apple not caring. I just purchased most of my music off AmazonMP3 which I've been doing more and more of anyway.
Yesterday I installed a new HDD and installed a fresh copy of Windows 7 Home Premium from my retail disc. I Installed all the updates then proceeded to install my software and put all my media back in-place. I'm a backup neat-freak so all this happen pretty easily and fast. I purchased a song off iTunes and was pleased to see it working again. Well here I am again suddenly having the issue with the connection timing out when purchasing a song. Firewall is configured fine and again I even disabled it. I know its not Windows now as there haven't been any new Drivers or Updates installed since I last purchased a song. I even tried different network adapters! What the heck is going on?This error is specific to RAS. The default CORBA request timeout is 10 minute = 600000 ms. When the RAS SDK does not get the reponse back from RAS server in 600000 ms it throws this message. Why it works in InfoView\CMC what I believe you refer to as "Front End' application is because InfoView\ CMC don't use RAS.
1. First make sure that a smaller report wich runs pretty fast ( 1-2 min) works. This will confirm that there is no connectivitiy issues between RAS and RAS SDK.
2. If you get the efrror for every single report, even the smaller ones, make sure the box running RAS and RAS SDK code( in case they are 2 different) can ping each other with IP, shortname and FQDN. If there is a firewall between them, the RAS port needs to be opened for bidirectional communication. By default RAS chooses a random port for communication with SDK but within CMC you can configure it to use a specific port and open it.
3. If the issue is specific only to reports that are long running, typically more than 10 minutes, then you need to inclease the CORBA timeout to a value more than what the reports typically would take to process. This is done on client code side or IIS in this case.
Here are the steps:
Make the following changes on the application server/system.
Open RegEdit by going to Start > Run and typing in regedit.exe. Then click Ok.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Client SDK\CorbaAdapter
Change the value of SendRequestTimeout(ms) to 100000.
Change the value of WaitReplyTimeout(ms) to 6,000,000 ms. The default value is 600,000 ms and may not be long enough.
Restart IIS by going to Start > Run and typing in iisreset. Then click Ok.
Retry the failing application.
See note: 1296656
This error should be easy to fix
Edited by: Aasavari Bhave on Feb 2, 2012 11:20 AM -
Hi Everyone,
We have the password portal up and running on one box and another server with FIM R2 and SharePoint 2010. All is good with the exception that our end users typically get distracted during the password registration and/or reset process and receive:
"An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000) ". The timeout kicks in after 5 minutes of inactivity in the browser.
The FIM Service log shows the following:
"Authentication gate timed out waiting for a challenge response".
I have confirmed that the default password portal web.config setting is <add key="SessionTimeoutInMinutes" value="20" />.
We have also updated Microsoft.ResourceManagement.Service.exe.config per this
article to the following but with no luck:
<resourceManagementClient resourceManagementServiceBaseAddress="myAddress" timeoutInMilliseconds="600000" />
<resourceManagementService externalHostName="myHost" dataReadTimeoutInSeconds="600" dataWriteTimeoutInSeconds="600"/>
We did not update the Windows SharePoint Servicesweb.config setting per the article about since we are on SharePoint 2010.
There is no NLB or firewall in front on this server.
If anyone has any solution to how to solve this on FIM R2/SharePoint 2010 please let me know.
Cheers!FIM_Admin,
You could try changing the receiveTimeoutInSeconds parameter of the resourceManagementService node in your Microsoft.ResourceManagement.Service.exe.config file. However, you are warned not to do this unless instructed to by MS customer support.
http://msdn.microsoft.com/en-us/library/windows/desktop/ee652424(v=vs.100).aspx
http://technet.microsoft.com/en-us/library/ff800821(v=ws.10).aspx -
ORA-12535: TNS:operation timed out on a win2000 Oracle instance
Hi,
i have a Oracle 8.1.5 instance on a WIN2000 PC.
I can connect me to this database with sqlplus
as long i stay on the PC (means i started the sqlplus
on the same machine).
When i try to connect from an other (unix-)system
i get after a while (ca. 90 sec.) the error:
ORA-12535: TNS:operation timed out
tnsping works fine (answer comes back in one second)
There are no firewalls or other "strange" things between
the database and the failing client (on an other PC,
also win2000, Oracle 8.1.5 everything works fine).
Below you see the log with debug of the listener.
I have also a trace on level SUPPORT but this is more
than 1000 lines for just 1 or 2 TNSPINGs and one SQLPLUS
connect. Due to this volume i decided not to attach it to
this initial mail.
Does any one have some advice or experiences ?
Please advice.
Best regards,
[email protected]
======================================================================
TNSLSNR for 32-bit Windows: Version 8.1.5.0.0 - Production on 19-APR-01 09:07:26
(c) Copyright 1998 Oracle Corporation. All rights reserved.
Die System-Parameterdatei ist D:\Oracle81\network\admin\listener.ora
Log-Meldungen wurden geschrieben in: D:\Oracle81\network\log\listener.log
Listen auf: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=driller-nb)(PORT=1521))(PROTOCOL_STACK=(PRESENTATION=TTC)(SESSION=NS)))
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
19-APR-01 09:07:28 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=mdriller))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=135286784)) * status * 0
19-APR-01 09:08:04 * service_register * MDR50 * 0
19-APR-01 09:08:11 * trc_level * 0
19-APR-01 09:08:16 * trc_level * 0
---------------- BEGIN TNSLSNR DEBUG ---------------------
*** ENDPOINT #1 **
Name:
Address: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=driller-nb)(PORT=1521))(PROTOCOL_STACK=(PRESENTATION=TTC)(SESSION=NS)))
Presentation: ttc
Session: NS
Info = <none>
Display: <none>
Load: 0
Handler ID = 80FFE377148D-41F8-AAC2-09A8BD4BE682
Oracle SID = <none>
Flags:
** INSTANCE #1 **
INSTANCE_NAME: MDR50
SERVICE_NAMEs: MDR50
INSTANCE LOAD: 0
INSTANCE ID: 4CC2FCDA6819-40D2-839D-F1628CC0BCA2
FLAGS: LOCAL
VERSION: 81500
NUM. HANDLERS: 2
Handler Matrix: (NS):
tcp nmp spx raw ipc beq lu62 tcps ANY
ttc 0 0 0 0 0 0 0 0 0
giop 0 0 0 0 0 0 0 0 0
http 0 0 0 0 0 0 0 0 0
ro 0 0 0 0 0 0 0 0 0
ANY 0 0 0 0 0 0 0 0 2
Handler Matrix: (RAW):
tcp nmp spx raw ipc beq lu62 tcps ANY
ttc 0 0 0 0 0 0 0 0 0
giop 0 0 0 0 0 0 0 0 0
http 0 0 0 0 0 0 0 0 0
ro 0 0 0 0 0 0 0 0 0
ANY 0 0 0 0 0 0 0 0 0
SERVICE HANDLERS:
Name: DEDICATED
Address: (ADDRESS=(PROTOCOL=beq)(PROGRAM=oracle)(ENVS=)(ARGV0=oracleMDR50)(ARGS='(LOCAL=NO)'))
Presentation: <none>
Session: <none>
Info = LOCAL SERVER
Display: DEDICATED SERVER
Load: 0
Handler ID = 83CB008C17A3-4E48-94DA-2765A62AAD7E
Oracle SID = <none>
Flags: BEQUEATH
Name: DEDICATED
Address: (ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleMDR50)(ARGS='(DESCRIPTION=(LOCAL=no)(ADDRESS=(PROTOCOL=BEQ)))'))
Presentation: <none>
Session: NS
Info = LOCAL SERVER
Display: DEDICATED SERVER
Load: 0
Handler ID = D9E0EC298D16-40FA-935F-7B989D139666
Oracle SID = MDR50
Flags: BEQUEATH CONNECTED DYNAMIC
** INSTANCE #2 **
INSTANCE_NAME: PLSExtProc
SERVICE_NAMEs: PLSExtProc
INSTANCE LOAD: 0
INSTANCE ID: 000000000000-0000-0000-000000000000
FLAGS: LOCAL
NUM. HANDLERS: 1
Handler Matrix: (NS):
tcp nmp spx raw ipc beq lu62 tcps ANY
ttc 0 0 0 0 0 0 0 0 0
giop 0 0 0 0 0 0 0 0 0
http 0 0 0 0 0 0 0 0 0
ro 0 0 0 0 0 0 0 0 0
ANY 0 0 0 0 0 0 0 0 1
Handler Matrix: (RAW):
tcp nmp spx raw ipc beq lu62 tcps ANY
ttc 0 0 0 0 0 0 0 0 0
giop 0 0 0 0 0 0 0 0 0
http 0 0 0 0 0 0 0 0 0
ro 0 0 0 0 0 0 0 0 0
ANY 0 0 0 0 0 0 0 0 0
SERVICE HANDLERS:
Name: DEDICATED
Address: (ADDRESS=(PROTOCOL=beq)(PROGRAM=extproc)(ENVS=)(ARGV0=extprocPLSExtProc)(ARGS='(LOCAL=NO)'))
Presentation: <none>
Session: <none>
Info = LOCAL SERVER
Display: DEDICATED SERVER
Load: 0
Handler ID = 56D4DAD11082-4097-992C-AF7F8067D858
Oracle SID = <none>
Flags: BEQUEATH
---------------- END TNSLSNR DEBUG ---------------------
19-APR-01 09:08:28 * debug * 0
19-APR-01 09:08:41 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=mdriller))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=135286784)) * status * 0
19-APR-01 09:09:57 * ping * 0
19-APR-01 09:10:16 * (CONNECT_DATA=(SID=MDR50)(CID=(PROGRAM=)(HOST=slarti)(USER=mdriller))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.34)(PORT=55678)) * establish * MDR50 * 0
19-APR-01 09:14:39 * trc_level * 0
19-APR-01 09:14:58 * trc_level * 0
19-APR-01 09:15:06 * trc_level * 0
19-APR-01 09:16:16 * trc_level * 0
19-APR-01 09:16:20 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=mdriller))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=135286784)) * status * 0
19-APR-01 09:16:33 * trc_level * 0
19-APR-01 09:17:09 * ping * 0
19-APR-01 09:17:51 * (CONNECT_DATA=(SID=MDR50)(CID=(PROGRAM=)(HOST=slarti)(USER=mdriller))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.34)(PORT=55695)) * establish * MDR50 * 0
19-APR-01 09:18:06 * MDR50 * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.34)(PORT=55695)) * service_update * MDR50 * 0
19-APR-01 09:23:33 * (CONNECT_DATA=(SID=MDR50)(CID=(PROGRAM=)(HOST=deep-thought)(USER=mdriller))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.22)(PORT=42006)) * establish * MDR50 * 0
19-APR-01 09:28:09 * MDR50 * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.22)(PORT=42006)) * service_update * MDR50 * 0
19-APR-01 09:28:25 * ping * 0
nullRather than
MyDB.10gXE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = MYSERVER)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
why not go with the bulk standard tnsnames entry as follows:-
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = MYSERVER)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
I don't think the qualified MyDB.10gXE name is adding any value and may well confuse things.
Although setting it for my environment does work
C:\Documents and Settings\mtownsen.ST-USERS>tnsping myDB.10gXE
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 09-NOV-2
005 18:06:48
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = mtownsen
-lap.us.oracle.com)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_
NAME = XE)))
OK (40 msec)
OK - when I use your entry pasted directly from the above, with my server name, I get the following problem:-
C:\Documents and Settings\mtownsen.ST-USERS>tnsping myDB.10gXE
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 09-NOV-2
005 18:07:43
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION =
TNS-12533: TNS:illegal ADDRESS parameters
I added back some spaces, as indicated by the . below, and it works fine
MyDB.10gXE =
(DESCRIPTION =
.(ADDRESS = (PROTOCOL = TCP)(HOST = mtownsen-lap.us.oracle.com)(PORT = 1521))
.(CONNECT_DATA =
.(SERVER = DEDICATED)
.(SERVICE_NAME = XE)
.)
Maybe you are looking for
-
Two "Libraries" - What's wrong with this picture. ?
- "picture". -> http://www.proxigee.com/this_picture.png I've got two "Libraries". One at the first level. - main HD folder. And one with my main "Home" - level, folder. Not sure, how this happened, exactly. .. As best I can figure, I may have moved
-
Will i lose my unlimted data if i switch to a non-simcard smartphone to a phone that uses a sim card
i am currently using a 3G only Droid X2 and plan on switching to a Droid Razr Maxx 4GLTE, the droid X2 does not use a sim card but the Razr Maxx does, the Razr Maxx will be my first 4G phone and sim card phone, i was just curious if my unlimited data
-
Is there a way to alter the style for a specific option in a combobox? I have been unable to find a list of the recognized keys (other than "label" and "data" ) for the dataProvider array. My goal is to have some options in the combobox have light re
-
Hi All Ok, I have an external Lacie attached to my eMac and I want to use this for making a bootable backup and for storing files. My assumption is that I partition this drive and use one partiton for the bootable backup and the other one for storage
-
About open desktop folder animation
hi guy when i click desktop's disk or folder icon why i can't see folder or disk open scale animation its just show my screen anybody can tell me how to change it thanks i am use Snow Leopard