IO is active in BC but not visible in RSA1

I have installed one IO '0PO_NUMBER' from Business Content
and have saved in local object.Following way I installed the
infoobject,in the right hand pane its showing active but its not
visible in RSA1.
Steps
1. Dragged the perticular IO-PO_NUMBER to the right pane and dropped there.
2. Grouping - In data flow before
3. Collect - Automatically
4. Install - Install
Now IO is avtive in BC -right pane where we used to drag and drop the IOs.But in RSA1 its not found.
Could somebody tell me why its not found ?

Hi BI Experts,
The standard IO that I have installed successfully form
Business Content is showing active but its not visible in
BW system.
Then again,I have deleted the IO form RSD1 and installed
it and got the same result as it was before.
Your suggestions are welcome.
Apart form this,Please tell me how to find inactive IOs in
BW system.
Thanks

Similar Messages

Where to look for reasons a job is active in sm37 but not in sm51

I have sitation a job is active in sm37 but not in sm51. What could be the reason?
What to look for.
I try to Job->Check staus in "sm37" but job still looks to be active

this is the log of still active k+job in sm37:
Date       Time     Message text                                                                                Message class Message no. Message type
17.12.2009 23:00:25 Job started                                                                                00           516          S
17.12.2009 23:00:25 Step 001 started (program RFKK_MASS_ACT_SINGLE_JOB, variant &0000000051777, user ID BVJANBO)      00           550          S

Data source was activated and replicated but not showing up in RSA7.

Hello,
Data source was activated and replicated but not showing up in RSA7. At what point does the data source appear in the Delta Queue?
Thanks

Hi,
for LO,LIS,generic,FI data sources, delta records come from delta queue.
if u run the INIT in BW whether it may be success or not delta queue will be maintained in RSA7. and u can check the records in RSA7 or smq2.
when the init request goes to R/3 then it will maintains delta queue in RSA7.
assign points if it helps,
thanks,
pavan.

Form created but not visible!!

Form created but not visible!!
Hi everyBody,
I've created 2 user Forms binded with a 2 user tables (with diffrent UDOs) and everything works perfectly. When I tried to run it on a machine at a customer, the first form functions perfectly and the second one is created but does not appear!!!,
I am lost!!
Is there a problem of SQL Server 2005?!
Is it because of the nature of the machine (server or client machine)?
Is there a problem of configuration (Operating System)? I'm using Windows XP but the other machine is using Windows 2000.
would somebody have an idea or suggestion?
Thank you in advance

HI Haifa,
When the second form opens (but doesn't appear on screen) choose Windows--Cascade from the top menu. Sometimes a form will open outside the viewable area in the SBO client so choosing this menu option will reset it.
Kind Regards,
Owen

Datasource not visible in rsa1

Hello,
my datasources are not visible in rsa1 -> source systems.
I tried replicate, check connection, repair connection, run report RSAOS_METADATA_UPLOAD, upload metadata, etc.
Now I have no clue.
In roosource datasourse is active (in sourcesystem).
Any idea?

Wow!! I loved the way it works :).
I was trying all sorts of things to find out where did my datasource go. then i stumbled upon your recommendation Yogesh. And it did work. everything appeared perfect after i logged off n then login.
Thanks a lot Yogesh.
next time when I get a weird error the first thing i'm goin to do is to log off.

DataSource is saved, but not visible in BW under the node NODESNOTCONNECTED

When activating a datasource, I received the following message:
Message no. R8418
Diagnosis
You tried to assign a DataSource to the application component DM. This application component is, however, not entered in the RODSAPPL table as an application component.
System Response
The DataSource is saved, but is not visible in BW under the node NODESNOTCONNECTED.
Does anyone know a work around for this?
Thank you.

Hi,
you are missing Application Component Hierarchy in your BW System which is stored in tables called RODSAPPL and RODSAPPLT (for the texts).
First try to replicate the DataSources/Component Hierarchy from the Source System.
Goto RSA1 -> Source Systems -> Replicate DataSources
Goto DataSources again and try to activate.
Take also a look:
534894 - Replication of application components and DataSources to BW
350024 - BW-OLTP-APCO: Frequently asked questions (FAQ)
Hope this helps.
Regards
Andreas

Programs installed but not visible in application folder

I am having a strange problem. Only a few of my programs are showing up in the application folder. If I search for the programs using the finder window they are there and the path at the bottom of the finder window shows they are in applications, and can be used but they just are not visible in the application folder (root folder).
Any suggestions how I can make these programs visible.
Thanks

Try this as a start:
Enable Finder to Show Invisible Files and Folders
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following command line then press RETURN.
defaults write com.apple.finder AppleShowAllFiles TRUE
killall Finder
To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
defaults write com.apple.finder AppleShowAllFiles FALSE
killall Finder
Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.
Do both items. Sometimes simply setting the Finder to show invisible files then turning off the option will make those invisible applications reappear. Sometimes it doesn't work. In that case you can try the following:
1. Enable the Finder to display invisible files. Leave the Terminal active.
2. Enter the following command line in the Terminal
sudo chflags -R nohidden
Put a space after "nohidden", select all the invisible applications you could not see and drag the selection into the Terminal window. Press RETURN. You will be prompted for your admin password. Enter it. It will not be echoed. Press RETURN.
3. Disable the Finder's display of invisible files.

Data is visible in base tables of BOM routing but not visible in front end

Hi,
Through BOM_RTG_PUB API I am populating routing data into base tables, it is successfull.. but that data is not visible in front end when i queried from front end..
i am getting error while i run API as......
An error occured while processing business object BOM_ITEM12 in organization MMO. Please check the data in this business object and re-run the import process.
Can any one help me in finding out what's wrong with this..
Thanks in advance..
Edited by: 875417 on Feb 6, 2012 10:49 PM

Your obeservation is correct, and expected behavior.
This behavior is useful when you have inputs that you would like to set as defaults for the user.
Obviously, if there is a value to be saved, it will require some memory to store the value.
If the input is left empty by default, that memory is made available again.
It may not be easy to think of a good use for this for a graph, but think about for numeric or string controls.
What if the user isnt sure how they should input a certain parameter or value?
You could store a default value so they could see how they should input their value.
Message Edited by Cory K on 09-15-2009 11:12 AM
Cory K

I'm having issues with text layers in photoshop. Text layers show it's there but not visible on the canvas.

I'm having issues with text layers in photoshop. They aren't visible. I've checked font size, alignment, layer order and color. And the layer list shows that it's there. All seems well but I still can't see the text that I write. Need help trouble shooting. (I asked this question about a month ago but I got sidetracked and never circled back.) Thanks.

Please refer to your original topic (Text Layer not Visible.) instead of posting a new topic.

Bright White Pixel on LCD - But NOT Visible on Black Background

Hi All,
Just noticed today on my macbook pro (Early 08 - july manufacture) that a small white spot has appeared. Not the blobby large spots that were common lcd problems before on older models, but almost a pinprick of a white spot.
Now its not a dead pixel, since its not black, and its not a stuck pixel, since it has no definite visible colour, also, it is NOT visible on a black background (is this due to the way LED backlights work???) so i dont think its a HOT pixel exactly...it is most visible on plain white backgound - but on any colour R/B/G it is visible as a spot that is brighter than the other area around.
...so...what is it, how can i find out what it is? and might warranty help (presumably for one pixel = no)?
What might i try? Anyone else have experience of this? Every other forum post forum either talks about: 1) dead pixel that si ALWAYS black 2) Pixel that is always white but even on black background 3) coloured pixel - none of which i have exactly, my white pixel is NOT at all visible on black background.

Hi:
I just want to tell you that my Macbook Pro is the same as yours, at it presents that small white spots problem.
In fact, let me tell you all, that those are not dead or stuck pixels, is a problem on the LCD itself, the pixels on that spots are lighter than the other pixels, that's why they look white, but they are not white. They are a lighter color than the other pixels. But again, those are not pixels, in fact they are a group of pixels, from 6 to 13 pixels eash one. Also you can notice like hairlines with the same issue.
My white spots are on the left side of the screen, y 4 of them.
Also, my screen haves particles inside.
I will take my laptop to the apple service senter, and it doesn't matter what they say, they will have to exchange my screen.

Pods are open but not visible????

I have opened the project and moved the pods (Project Manager, Project Set Up, etc) around but seemed to have moved them to far up and now they are not visible on the screen. I have tried closing the project and re-opneing it... hoping the pods would return to the default view but have had not luck.

Hi there
Try clicking File > Load Default Environment (RoboHelp 7)
or File > Environment > Load Default Environment (RoboHelp 8)
Cheers... Rick
Begin learning RoboHelp HTML 7 within the day - $24.95!
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

App's windows exist but not visible

(No, this isn't a hidden app, or minimized window, or window on different screen (Mission Control))
About a month ago, windows in Microsoft Word (Office 2011) stopped being visible on the desktop, but are listed under the app's Window menu item.
This affects all windows in that app that I can generate (the initial choice window (sorta an Open File dialog), a window created by opening a Word document, & the app's preference window, Page Setup, Print, Properties, etc.).
If I choose to use the app's Minimize Window menu item, I see the window morph into the dock. If I then click on the window in the dock, it again visibly morphs onto the desktop only to disappear when it would normally show the full window.
The morphing window & minimized window appear to have the correct content.
Based on the morphing, the size of the invisible window easily fits on the monitor (either built-in or external).
The window does not show up in Application Windows (F10) or related window pickers.
This does not happen to Powerpoint or Excel, nor to any other app that I've noticed.
I logged in as another user on my computer and the Word windows work properly for that user.
Nothing relevant appears in any logs when I open a window in Word (Only log message is "Microsoft Word[2296]: GetScaledBatteryInfo is unimplemented and will be removed soon. Please stop using it.")
I know of nothing special that happened at the time I first noticed this, but I don't run Word daily. (Since the problem arose, I've been using Pages to view Word files.)
I've tried repairing permissions. I've also done a complete removal of Office 2011 (http://support.microsoft.com/kb/2398768), which includes deleting all the ~/Library/Preferences/com.microsoft* files, ~/Documents/Microsoft User Data directory, the /Application/Office 2011/ directory, the /Library/Application Support/Microsoft directory, Microsoft fonts, and more, with multiple reboots. After a full reinstall, the problem remains. This would seem to rule out Word itself or its preferences.
As a s/w developer (non-Mac usually), I'm pretty good at chasing down similar bugs, but I've not been able to find anything similar by searching here or by Googling.
Since it works for the other user, the problem likely is in my preferences somewhere, but not in the MS Word or Office preferences (since those were completely removed & replaced).
Any help would be appreciated.

Hi William,
Did you eventually find a solution to this issue, because I'm pretty sure I'm encountering exactly the same problem since a couple of days!

Agent installed.. but not visible in Grid Control

Hello guys,
i have installed a new Oracle Grid Control (OMS with new database/repository) and upgraded it to 10.2.0.4.
After that i have installed a Oracle Grid control agent 10.2.0.4 agent on a host and configured it.. but the host is not visible in the Oracle Grid control.
The agent itself seems to work.
UPDATE: The problem is solved.. it was described in metalinknote #389528.1... the problem was that after the upgrade to 10.2.0.4 the secure configuration on the OMS was corrupted.
Regards
Stefan

I got the same error and as mentioned on the metalink note I fixed the problem.
however, on target tab of EM if I search clicking on the button ADD it is still dont finding the agent on the another host.
everythin seems to be ok....
any tips friends ?

Printable, but NOT visible on screen - How?

Hi,
     We have some MS Word documents to make into PDFs. We would like to designate some of the text and graphics to be invisible on screen, but visible when printed.
     We need this to ensure that our users actually do print the PDFs as required. They will have to call us and tell us the "special word" on some of the pages. They will only be able to get the "special word" by printing the document.
     Yes, yes...I know that this isn't super high-tech, but it should accomplish our goals. :-)
     Can this be easily done in Acrobat 9 Pro? What commands/menus should I explore to accomplish this task?
Thanks,
        Tim

Thanks for leading me in the right direction. I didn't do exactly what you suggested, but it got me to the right place to find the answer that really worked for me.
I created some text boxes (with no borders). Typed in my "secret word/characters." Then, there is an option in the dialog box "General" tab. I selected "Hidden but printable."
This did the trick for me. It cannot be seen on screen. It very clear when printed.
Now that I know this functionality, I'm using it to do the reverse, too (visible, but not printed). It allows me to display warnings or guidelines about how to complete the document (on-screen), but doesn't clutter the printed version.
Perhaps the best part is that it works on Acrobat 7 Pro. (7.0.9)   I didn't even have to purchase the upgrade to accomplish this.
try67 is #1 in my book (er, PDF)!

How can I add a device to my library? My e-reader is registered but not visible.

Hello,
I use a Tolino Shine and can download E-Books via WLAN directly to it. I can also download the books to my netbook. However, when I plug the Tolino into my netbook it is not visible in the Adobe library and I cannot move books from the library to the Tolino.
I tried to reset the Tolino to the manufacturer settings. This did not improve the situation.
Any suggestions?
Thanks a lot!

http://www.apple.com/icloud/find-my-iphone.html
any chance of it working on non-apple phones?
No, it requires the operating system iOS, only available on Apple Devices.

IO is active in BC but not visible in RSA1

Similar Messages

Maybe you are looking for