IO system status and user status

Hi all,
Could you please tell me where the link between IO sys and user status.
Thank you.

Hi
System status and User status:
System Status
o        The system sets a system status informing the user that the system has executed a certain business transaction for an object.
o        You can only influence this status by executing a business transaction that changes the system status.
o        If you release an internal order, the system automatically sets the Released system status.
User Status
o        You can set a user status in addition to the existing system status.
o        You specify the user status in a status profile, which you create for each order type in Customizing.
o        You can specify and activate any number of user statuses.
o        In a production order you can simultaneously
The system status and the user status influence the business transactions in the same way.
The status profile allows you to:
o        Define the user status and document its functions with a corresponding long text.
o        Assign a status number that specifies the order in which the system reaches the user statuses.
o        Define an initial status, which is then automatically set when an object is created.
o        Determine that a user status is automatically set when you execute a business transaction.
o        Permit or forbid specified transactions, if a status is active.
VVR

Similar Messages

  • How to get system status and user status of service order

    Hi,
    I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
    I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
    Regards,
    Kamesh Bathla

    Hi,
      Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
    Regards
    Srinu

  • Fetching the sales order data using both system status and user status

    Hi,
    Could any one tell me how to fetch sales orders using both system status and user status.
    My requirement is to fetch sales order data in a report where the user enters the system status and user status in the selection screen fields.
    For example i need sales orders where the system status is I1002 i.e. OPEN and user status is E0002 (status profile CMSCON0) that is In Process
    Early replies are appreciated.
    Thanks
    Tanveer

    Hi,
    The system status and user status are stored in CRM_JCDS & CRM_JEST tables you can get the all the order GUID on particular status further pass the order GUID in table CRMD_ORDERADM_H to get transaction ID.
    Regards,
    Dipesh.

  • System status and user status Priority

    Hi All,
    We have system status and user status for the production order, I would like to know which has higher priority.
    E.g In system status some business activity are not allowed but at the same time for user status those activites are active, then which status has high priority.
    Regards,
    Ranjan

    Hi,
    As per my understanding both the status work together. If User status forbids a business transaction and system status allows it, then also the business transaction cannot be carried out.
    Also if system status forbids a business txn and user status allows that, then also you wont be able to carry out the txn.
    Both work with "AND" condition.
    Regards,
    Rohit.
    Added: you can try it by creating a User status profile. Allow Goods Movement to CRTD status. Now dont release the production order, only save it. Then try issuing goods (261), the system will block you.
    Now, other way round, forbid GR without confirmation. Though System Status allows GR without CNF or PCNF status, but the user status will forbid the transaction.
    Hope the example helps.
    Regards,
    Edited by: Rohit Chauhan on Jun 5, 2009 9:09 AM

  • System status and user status in Line Item Reports

    Dear PS-friends,
    I have to extend the CI CI_PROJ with some new fields. These fields should be shown in diverse Line Item Reports (CJI3 u2026).
    I know how to get these customer fields into the field catalog for the reports (maintain include table CI_RKPOS, EXIT_SAPLKAEP_001 and ViewCluster V_TKALV).
    Now our customer wishes that 2 of the new fields are: system status and user status. The status should be shown in CJI3 as a concatenated field as you see it in CJ20N.
    In CN42 there is the column system status as a standard column. But I cannot find the structure CNJ_STAT included in V_TKALV for Line Item Report Object=PD.
    Has anybody an idea how it works to show the system status and user status in Line Item Reports.
    Thanks in advance!

    Problem is solved.
    I wrote a function module using FM 'STATUS_TEXT_EDIT' and concatenated line and user_line.

  • How to get system status and user status ?

    how to get system status and user status for the given production order?
    In which PP table we can
    find these?
    Thanks&Regards
    Satish

    Hi Ram,
    Use the FM "STATUS_READ" to read both the system and user statuses for an Order.
    Alternatively, the following tables store the user and system status info:
    JSTO- Status object information
    JEST- Individual Object Status
    Hope this helps.
    Let me know if u need further information.
    Regards,
    Sonal

  • How to fetch service order with partucular system status and user status

    Hello All,
    How to fetch service orders with specific system status and user status.
    thanks

    I want tables or views from where I can fetch service orders. I have to design ALV report based on this.
    I want to fetch released service orders with status INIT and RENT.
    Here, SYSTEM Status = Released and
             USER Status     = INIT
                                        RENT
    So is there any function module available for the same.....

  • Difference between system status and user status.

    Can someone explain to me the difference between system status and user status in details

    Hi,
    As you mentioned there are 2 status can be maintained for documents like Equipment Master, Notification, Maintenance Order & other important business documents.
    In case, client feels that system status is not enough to capture the details of the object, then user status can be used.
    System statuses will be updated automatically based on business transactions which will be done on SAP.
    For example, once the equipment is created, System status would CRTD (Created). If you install the same to some superior equipment or FL, then status would be INST (Installed).
    If you keeping that equipment in Spare, then for that, you have to maintain separate User Status like AVLB (Available in Stock / Spare) so that through IH08, by using User status, you can the report which is available as spare.
    These user status as per the name, should be updated by the user manually.
    Regards,
    Maheswaran.

  • System status and user status for ECR

    Hello,
    As per our requirement, we have defined some 7 user statuses. We need to link system status with user status
    How to link the user status with system status or is user status needs to be selected manually in every status of ecr
    Thanks.
    Anirudh,

    The user statuses are
    unassigned - workflow is not initiated,
    pending - change is not submitted to analyst who reroute it to change board,
    cancelled - change is cancelled,
    submitted - subimitted to analyst for routing to change board,
    hold,
    released,
    implemented - ECO complete
    We change only Document through ECR.
    We want to link system status to these above user status.
    The user tracks ECR by means of  user status and not system status.
    Anirudh,

  • System Status and User Status

    HI Team,
    Is there any way by which i can hide or make in display mode my user and system status icon in PM order, which i can do in notification.
    Thanx in advance

    To the best of my knowledge, you can not hide the Icon. But you can restrict the user not to change the status by Authorization key.
    For User status:-
    Create keys by
    SPRO setting
    Plant Maintenance and Customer Service >Master Data in Plant Maintenance and Customer Service>Basic Settings-->Create Authorization Keys for User Status Authorizations
    Assign this keys to your user statuses. Basis will use it for user roles.
    As the System statuses changed by the business transactions, need to find the authorization object (BASIS) and restrict the user.
    [Useful Info|http://www.sapfans.com/forums/viewtopic.php?p=823900].
    Babu

  • System status and user status don't appear in maintenance order

    I can't see the user status or the system status in the maintenance order header or equipment header or any report although when pressing the button information you can see it

    Hi Michael Nawar ,
    Please check have you define Status profile and status in T code OIBS ?  , and for object like PM order whether you have assigned it to your defined order type in T code OIOG ?
    and for equipment check in SPRO Master Data in Plant Maintenance and Customer Service >> Technical Objects >> Equipment >>Assign User Status Profile to Equipment Category.
    Riyaj

  • System status and user status configuration

    Hello All,
    1. Is it possible for the system to  reverse the user status of WBS element if the actual business transaction is reversed. For example, User status 'ABC' is set as Initial status and in OK02 config, it was set that, when the system status is 'ACPT'( will appear when we create an SO and saved), the user status will be changed to XYZ. But subsequently when the WBS element in the Sales order is removed (by changin SO because of wrong postin), is it possible to the initial active status.
    Here my ok02 config is like this
    stuatus 10 ABC 10 30   1  1
                 20 BCD  10 20  1   1
                 30 XYZ  30 40  1  1
    Here my requirement is once the system sets the status XYZ, the user should not change to BCD. But my above mentioned requirement of reversal will arise when the user wrongly enters the WBS element in the SO.
    Any advice is highly appreciated. Could not find proper solution after enough search.
    Thanks.
    Ram.

    Hi,
    In this case you can create the one more user status as 40 EFG 10 40 1 1and restrict this status by authorisation key.
    provide this status authorization to responsible person not for all the users. If SO deletes the responsible person changes the status from XYZ to EFG and then to ABC, from here you can follow regular process.Finally the WBSE status remains
    as XYZ.
    regards,

  • Syatem Status and user Status

    Dear All,
    I am using portal for solution manager. In status tab when I check on add status drop down gives me system as well as user status. I want only user status to be displayed in drop down. Its PCUI screen.
    How can I do that?
    Regards,
    Nikhil

    issue resolved by implementing BAdi

  • 0NOTIFICATN_ATTR datasource - how it get the system and user status

    Guys,
    I have 0NOTIFICATN_ATTR datasource bringing master data attribute of Notification document into BW. I saw it also bring the document system status and user status. But it only bring in the first status for each. i.e. for a notification document, it can has multiple system status (e.g. ATCO DLFL ...). this extractor only bring in 'ATCO'. while compare to the status DLFL (deletion flag), ATCO didn't really matter again.
    So, i am trying to find out how this datasource extract the status, how can i change the status field into a 40 chars field so i can keep all active status (as it shows in ECC, when user display the notification document status). Did anyone solve this case before?
    Thanks for the help.

    Hi,
    watch the following thread.
    how to extract equipment status in to bw
    and please refer following article by Vamsi
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/301941a0-25b4-2d10-6eb9-9758cbc28559
    It would be very useful.
    Thanks.

  • System and User Statuses Missing

    Hi All,
    Does anyone know what causes the system and user statuses to disappear on the main screen of the production order.  Normally we see all system statuses  and the current user status like this:
    Status     CRTD PRC  CSER BCRQ MANC SETC  REL
    User Status    ERR
    Some configuration must have changed because even though the statuses are in JEST, they are not displayed on the order.
    Status
    User Status 
    Thanks for the help,
    Malissa

    Malissa,
    Just a different thinking to see, whether we can get some clues.
    I would suggest you get into the order in the change mode,  try some minor changes may in terms of operation text etc...and try to save the order. if there are some missing stuff, I am sure now SAP would throw out the error lets take the leads from there on.
    Regards,
    Prasobh

Maybe you are looking for

  • Adobe Premiere Elements 11 Uploading Problem - HELP

    I recorded some footage with Bandicam, then editted it, using a lot of clipping and cropping of the footage to give it a widescreen look. When I uploading it, I choose the setting of "High Definition Video for YouTube". When it finally uploaded, it l

  • Vulnerability identifier: APSB09-15

    I have Adobe Acrobat Pro 6.0.  I'm trying to determine if  the critical vulnerability"Vulnerability identifier: APSB09-15" at http://www.adobe.com/support/security/bulletins/apsb09-15.html applies to my version.  There are updates available but they

  • Sleep/wake button problem

    Hi al I got an iphone5 as a gift from my brother from canada. Now its sleep/wake button is not working..i am in India..what should i do now..its 6 months older hanset..is its waaranty valid here in India

  • Duplicate Rows In Oracle Pipelined Table Functions

    Hi fellow oracle users, I am trying to create an Oracle piplined table function that contains duplicate records. Whenever I try to pipe the same record twice, the duplicate record does not show up in the resulting pipelined table. Here's a sample pie

  • SCCM Endpoint Protection Removal of Trend Micro OfficeScan v10 assistance

    Hi, I just thought i might ask this, i see that Endpoint Protection has the ability to uninstall "Trend Micro OfficeScan" We have "Trend Micro OfficeScan 10", we have protected ours with a password, i would just like to know when i deploy the Endpoin