IOM 1/2 (B) current connectivity does not match discovery policy: unsupported-connectivity

anyone have a clue? My chassis-discovery policy is correctly set to 2, the same number as the two IOM ports per FI.

Hey Keny,
Thanks for the reply, I meant to post my resolution for this. First off, this is error I had in addition to a F0399 error which I don't have a screenshot of:
Additionally, this is what the Fabric Ports status looked like:
Last night during a maint window, I re-acknoledged the chassis which did indeed cause an outage for about 3-5 seconds. During this time all of my VMs had HA errors. I've added to my SOP to disable HA during a chassi re-ack. Afterwards, any VM that was powered off during the re-ack was also marked as (inaccessible) in the Vcenter client. These VMs could not be powered on. This was non critical as all powered off VMs were not production critical so I put in a ticket w VMware and worked with them this morning to resolve.
After working with VMWare, I discovered there were two ways to fix the problem. 1.) Instead of connecting to VCenter, you could connect directly to the individual ESXi hosts. For some reason, the (inaccessible) VMs could be powered on when you did that. 2.) Later, I found that the storage was in an ambiguous state and that if I simply refreshed the view on the stat stores, all of the VMs would be accessible even through VCenter.
Thanks for checking on me; my UCS is back up and running. I'm working on upgrading the firmeware to prevent this error from cropping up again (this according to TAC).
-j

Similar Messages

With color management, color picker current color does not match canvas color

What gives here with color picker in CS3?
RGB doc
using color management/profiles
View>>proof color using my Epson RGB printer profile
create box
double click fill box in palette box to view color picker
pick color from spectrum area
close color picker
want to change color of box
double click fill box to view color picker
NOW current color does not match color on canvas, subtle but vexing color shift. So how can I use current color to pick a new color on the canvas is always different.
here's an in illustration of the problem:
http://docs.google.com/Presentation?id=dfv8h494_18gwqbsjg5

Rob, here's screenshot of Acrobats Output Preview Object Inspector. You can download my PDF here - //www.fileswap.com/dl/Q1CzzOzEqt/
I'm not sure if CM was assigned to document when created or afterwards. In Color Settings preferences is stated Fogra 39 (if it matters - document was meanwhile saved and opened...). Are there other options to assign workspace to exsisting document?
Peter, this is not the case. Placed image has embeded same color profile as is working space of document in ID. I tried the same with sRGB image placed in same ID document and compared it to PS but color shift (greenish) is present - it looks exactly the same.
Guys, I can't tell you how happy I am to have you help me with this terrible and nerve-wracking problem.

[Solved] Ise does not match custom policy attributes!!!

example
authentication policy
if guest - and -
device location starts with : building_1 then GuestAccess
everithing goes fine
but
if MicrosoftWorkstation - and -
device location starts with : building_1 and IdentityGroup:Name MATCH Guest then GuestAcces
does not work!!! (match starts with equals etc...)
or
if Guest and -
device location starts with : building_1 AND IdentityGroup:Name MATCH Microsoft then GuestAcces
does not work!!! (match starts with equals etc...)
it doesn't even match the string "a" or "i" or "o"
this is to grant guest access only to microsoft workstation or apple devices after being profiled
what's the problem?

Hello Giuliano-
I have used the location field to build policies before and never had the problem. Can you provide some additional info:
What version of ISE are you using
Do you see a failed authentication in your live authentication window. If so can you post:
The reason for the failure
The detailed output of the failed attenuation. More specifically the output that contains all of the matched Radius attributes.

Printer will not connect wireless WPA passphrase does not match.

My printer use to work wireless and now has stopped. The passphrase has not been changed, all other wireless computers, PS3 still work. I have re-entered the passphrase several times with same error. Diagnostics resulsts:
Attention The WPA security passphrase configured on your HP printer does not match your wireless router setting.
Solution 1 Run the wireless Setup Wizard to re-enter your wireless network WPA security passphrase.
DIAGNOSTICS RESULTS
>Wireless
     - Wireless On     PASS
    - Wireless Working      PASS
> Connectivity
       - Connected     Not run
       - Disconnected count total    455
       - Disconnected count (last Hour)    0
       - Disconnected count ( last 24 hours)    0
> Network
       - Network Name SSID found    PASS
      - other networks detected matching your networks name SSID     NO
       - Wireless networks detected          4
>Settings
       - Printer Settings consistent with wireless router settings     NOT RUN
       - No filtering     NOT RUN
       - Channel    NOT RUN
      - Security    FAIL
Current configuration
       - Network Name (SSID)      xxxxxxxx    " the name given is correct"
      - Hardware Address (MAC) xxxxxxxx
       - ip address        NOT APPLICABLE
      - Configuration Source      NOT APPLICABLE
     -Communitcation Mode      INFRASTRUCTURE
     - Authentication Type         WPA-PSK
    - Encryption         Automatic (AES or TKIP)
     _ Internet       Not applicable
I have tried several times to input the passphrase, i have reset defults on the modem, i have unpluged the modem. Nothing seems to work. Any ideas on how to fix this problem. Note: I am able to connect my computer straight to the printer wireless but unable to connect throught the modem. please help.....
the modem is a UBEE DDW366

Temporarily remove and disable all security on the router. Now try to connect to your unsecured SSID. Are you successful? If yes, go back and add WPA2-AES with your password and try to connect again.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Error: Current provider does not support returning multiple recordsets from a single execution

Hello,
The following piece of code which has been working for the
past five years suddenly started giving me the following error:
Current provider does not support returning multiple recordsets
from a single execution
We have recenlty moved this site to a new server. Could this
error be related to their CFAdmin settings? Eveything else on the
site seems to be working fine. Or am I using an outdated tag or
something?
Any light in this direction is appreciated, thanks.
Here's the code:

There doesn't seem to be anything that seems wrong with the
code. It might have something to do with the Max Pooled Statements
or Number of Connections settings in the CF Administrator, but it
could just as easily have something to do with a setting on the
database. I would check with your provider.

The current project does not contain an EJB Module to deploy

Im trying to deploy the VSM sample app to a external oc4j.
After creating the deploy profiles and trying to deploy to the connection i created to the oc4j the deploy window says the project "**The current project does not contain an EJB Module to deploy" and start to deploy the war file.
have i made something wrong?
thnks.

We have no idea what the "VSM sample app" is. The problem is probably
in the sample app. The warning message just says that the EJB profile
has nothing to deploy, because the project doesn't have any EJBs.

User gets "This network connection does not exist" when she tries to log on to Terminal Server (2008 R2)

User gets "This network connection does not exist" when she tryes to log on to Terminal Server (2008 R2)
I got more than 100 users. Shes the only one getting is. We tried four computers (All Windows 7 Pro)
Nothing useful in event viewer to mention.

Hi,
Thank you for posting in Windows Server Forum.
Does that user able to login previously?
From your comment, it seems that there is some permission issue with that user. As you have checked that user with different system also. Please check that user is added under “Remote Desktop User” local group and also allowed “Allow log on through
Remote Desktop service” permission under group policy. Also please check that when user tries to login it uses “Domainname\Username” format.
In addition for a try, also check by disabling firewall on one particular system.
To add users and groups to the Remote Desktop Users group by using Local Users and Groups snap-in:
1. Click Start > Administrative Tools, Open Computer Management.
2. In the console tree, click the Local Users and Groups node.
3. In the details pane, double-click the Groups folder.
4. Double-click Remote Desktop Users, and then click
Add.
5. In the Select Users dialog box, click Locations to specify the search location.
6. Click Object Types to specify the types of objects you want to search for.
7. Type the name you want to add in the Enter the object names to select (examples) box.
8. Click Check Names.
When the name is located, click OK.
More information:
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176/en-us
Hope it helps!
Thanks,
Dharmesh

My iPhone 4s does not appear on devices when connected to iTunes in my Mac

My iPhone 4s does not appear on devices when connected to iTunes in my Mac

Check to make sure you have enough free space to include the videos.

Error while trying to install NI-VISA driver on SUSE LINUX 11.1(The version of gcc in the path does not match the version of gcc used to compile the currently running kernel.)

hi i am trying to install NI-VISA driver on SUSE LINUX 11.1.
the error message it shows is
******************************** ERROR ****************************************
* The version of gcc in the path does not match the version of gcc used to    *
* compile the currently running kernel. This can cause unpredictable         *
* behavior in kernel drivers and should be fixed.                             *
* gcc version: Linux)                                                          *
* kernel compiled with: 4.3.2                                                 *
******************************** ERROR ****************************************
my kernel source version is
linux-8nes:/home/admin # rpm -qi kernel-source
Name        : kernel-source                Relocations: /usr/src
Version     : 2.6.27.29                         Vendor: openSUSE
Release     : 0.1.1                         Build Date: Sun 16 Aug 2009 03:43:52 PM IST
Install Date: Sat 24 Oct 2009 02:13:12 AM IST      Build Host: rinck
Group       : Development/Sources           Source RPM: kernel-source-2.6.27.29-0.1.1.src.rpm
Size        : 309251954                        License: GPL v2 only
Signature   : RSA/8, Sun 16 Aug 2009 03:57:25 PM IST, Key ID b88b2fd43dbdc284
Packager    : http://bugs.opensuse.org
URL         : http://www.kernel.org/
Summary     : The Linux Kernel Sources
Description :
Linux kernel sources with many fixes and improvements.
Authors:
    Linus Torvalds <[email protected]>
    see /usr/src/linux/CREDITS for more details.
Source Timestamp: 2009-08-15 17:53:59 +0200
GIT Revision: 8a413546901c407e96f7fba18574cceeb40452af
GIT Branch: SLE11_BRANCH
Distribution: openSUSE 11.1
i had also installed GCC 4.3.2.
it shows the error message as i had posted.
please kindly help me on this.
Thanks and regards,
P.karthick

Check this solution

Error msg: Current user does not have privileges to perform product Activation

I am running Adobe Photoshop CS 8.0 on Windows Home Vista platform.
I keep getting this error message when I try to open Photoshop:
Current user does not have privileges to perform product activation. Run this application from a user account with administrative privileges or contact your system administrator.
I am the only owner & user of this software. I have re-installed the SW once (full install), and the error message went away for a while.
Now it's come back.
What do I do now?

2 options:
Either disable UAC (User Access Controls) or run the application with Administrator rights.

My computer no longer recognizes my iPod Touch. And the iPod Touch does not recognize that it is connected to a computer.

My computer no longer recognizes my iPod Touch. And the iPod Touch does not recognize that it is connected to a computer. It has worked great for many days until today.
I’ve tried two different Apple cables.
I’ve tried different USB ports on the computer.
I have rebooted both the Mac and the iPod.
I’ve wiggled the cables and checked for dust in the connectors.
The iPod charges using this same cable connected to wall wart. That’s a good sign.
Both the Mac and iPod seem to work fine separate from each other. They just won’t talk anymore.
Mac mini
1.83 GHz Intel Core Duo
OS 10.4.11
iTunes 9.2.1
iPod Touch 32GB, version 3.1.3 (7E18), model PB533LL

I found this possible solution on another support thread, so I tried it.
turn off iPod
hold Sleep and Home buttons to start it.
When Apple appears, let go of Sleep button, but keep holding Home button.
When screen goes blank, let go of Home button.
Connect cable and check iTunes to see if it has conencted.
This did not work for me.
I then turned off the iPod, restarted the Mac, and restarted the iPod normally.
I connected them with the cable, and it works like normal. :-)

My iphone5 no longer shows up as a device on my computer when I plug it in to a USB port on my laptop. It does not appear in iTunes as connected, either.

My iphone5 no longer shows up as a device on my computer when I plug it in to a USB port on my laptop. It does not appear in iTunes as connected, either. It does show that it is connected and charging on the phone itself. This is a new problem. It used to work just fine.

Hi Why do you need to use a PC since iOS 7 you can download updates Apps everything Over wifi I have iPhone 5 s & 2 ipads in over a year I have never connected them to My Apple pc Try a wifi update If you have problems Try a Reboot press & hold power button & menu button hold both Down until You see Apple Logo you will not last any data. Cheers Brian

My iphone4s does not turn on,when I connect to power ,it shows the message "connect to itunes" but when I connect to iTunes,my pc does not detect my phone,so iTunes does not detect my iPhone.

My iphone4s does not turn on,when I connect to power ,it shows the message "connect to itunes" but when I connect to iTunes,my pc does not detect my phone,so iTunes does not detect my iPhone.

Are you running the most recent version of iTunes for Windows on your PC? You may be running an older version that is incompatible with the 4s.
Hope this helps

Mac pro does not recognize ipad device when connected via usb port, suggestions?

mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions? itunes 10.7

Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
The most likely issue: Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

Adobe Connect does not show tool pointer/cursor when sharing Photoshop...

I am an online instructor and one of the courses I teach is a Photoshop course. Each week I host a Live Lecture session where we use Adobe Connect to demonstrate techniques and tools in Photoshop CS6.
I am receiving several complaints from students because Adobe Connect does not correctly show my cursor/pointer when it changes for each tool in Photoshop. All the students see is an arrow with a small icon of a face/monitor.
This is confusing to the students, because I am trying to demonstrate how to use a tool and they are unable to see the actual tool. For example, when I select the brush tool - they should be able to see the brush circle as the cursor. I then demonstrate how to resize the brush - but they cannot see it. Another example is any of the healing/cloning tools. If I select the healing brush tool, they cannot see the circle (brush). I then demonstrate how to record a healing point by selecting the Option (alt) key - but again the students cannot see the pointer change to the crosshairs to record the healing point - as all they see is the arrow with icon at all times.
Students are complaining that they are not able to comprehend what I am demonstrating because they are not able to get the full affect of the demonstration without seeing it how it should be. Prior to switching to Adobe Connect, we used WebEx - which showed the students everything correctly as I was demonstrating it. I was amazed to learn that Adobe Connect does not show everything - especially since I am using another Adobe program within Adobe Connect - you would think they would be fully compatible and able to show everything.
Thank you

I just saw this option for the first time last week. Very exciting to see it finally in Connect! There is a small amount of lag for the viewers, but nothing that can't be compensated for.

IOM 1/2 (B) current connectivity does not match discovery policy: unsupported-connectivity

Similar Messages

Maybe you are looking for