Iomega drive and airport extreme

any advice on getting an iomega 1.5 TB drive (formatted for Mac) to work with airport extreme base station - is not recognized anywhere at all, including in airport utility. It is recognized (and fully functional) no problem directly on my macbook pro. Am running snow leopard. Thanks very much,

search for the topic 'iomega prestige 1.5tb wont show up on aiport extreme', many of us have bought this drive and couldn't get it working with the AEBS.
I personally got a seagate drive from the store that worked perfectly at first attempt. I already have my time machine backup done.

Similar Messages

  • Usb hard drive and AirPort Extreme

    I have been using an external usb hard drive connected to my Airport Extreme to store music which is then picked up by a Sonos system to play music even when my iMac is switched off - has been working great.  However I became aware recently (and I think this pre-dates upgrading my iMac to Mountain Lion) that my external hard drive no longer shows up as a shared drive within Finder.  If I go into Airport Utility / Edit / Disks - 'enable file sharing' is checked.  Disk Utility doesn't see the drive but I'm not sure that really means anything as a network drive rather than a drive connected directly to the iMac.
    Has some recent upgrade disabled network drives on Airport Extreme's (ie assuming we are all now backing up to iCloud so don't need it)?
    Thanks

    OK, I feel silly on this one. 
    After looking for issues with the airport and not finding any and needing a file from my backup drive, I had to connect it up to my PC. That's when I found my solution.
    The Drive I had connected had stopped responding. That's why the Airport was not showing it and not allowing connections. I had power cycled the drive a few times while testing, just not long enough. I unplugged the drive for 2 minutes, all cables, then reconnected. After about 5 minutes, the Airport was able to confirm the drive and turned the share back on.
    Hope that helps.

  • Iomega ultramax and airport extreme

    Am I wasting my time trying to use an iomega ultramax hardrive with my airport extreme? I bought the harddrive prior to reading the posts on this site. I had been under the impression that I could use the harddrive with both laptops via my airport extreme. I am running Tiger.

    Sure. Forget about the AirDisk and buy one of these:
    http://www.dlink.com/products/?pid=509 - It's a D-Link DNS-323 2 drive bay SATA NAS box, and shouldn't cost you more than $185 without drives. It has Gigabit Ethernet, supports SMB and AFP (it'll work with Windows machines and Macs), and it even runs an iTunes server inside the box.
    http://preview.tinyurl.com/32vfc3 - Maxtor 500GB drives for $100 each shipped.
    So for ~$385, you can have 1TB of space which you can then array as RAID 0 or 1, or use as a big, contiguous drive.

  • Hard drive and airport extreme connection problem.

    Hi folks,
    I have an airport extreme and a WD 1TB pasport for mac hard drive. I had it connected for ages and used it to load movies onto to keep my macbook empty. I had no problems accessing it wirelessly through Finder until today when i configured the extreme to run at 5ghz. When i try to connect now, it tells me that the ip address is wrong but im connected to the extreme for internet. Any clues or solutions?

    your Airport Extremes ip address is the red square, Then your going to copy that
    So in the red box instead of Http:// we are going to put ftp:// then you should get
    a pop up say connecting to server and I hope you do get that.

  • USB flash drive and Airport Extreme

    I got an Airport Extreme, and one of the reasons why is so that I can have a drive attached to the router so that I don't have to leave on a computer for file sharing or go in and boot up the computer when I needed some files. I am using a 16GB USB flash drive at the moment formatted with FAT32 (no mac in the house). I tried to backup some stuff on it, a bunch of smaller files in a folder totalling about 4.3 GB. The base station keeps rebooting itself in the middle of the transfer.
    I saw some threads on here that are hinting that Airport Extreme doesn't work well with any type of external storage, whether an actual HDD or a flash drive. Those were somewhat dated. Is there a way to fix this? I'm using the latest firmware.

    OK, I feel silly on this one. 
    After looking for issues with the airport and not finding any and needing a file from my backup drive, I had to connect it up to my PC. That's when I found my solution.
    The Drive I had connected had stopped responding. That's why the Airport was not showing it and not allowing connections. I had power cycled the drive a few times while testing, just not long enough. I unplugged the drive for 2 minutes, all cables, then reconnected. After about 5 minutes, the Airport was able to confirm the drive and turned the share back on.
    Hope that helps.

  • External Drive and Airport Extreme ?'s

    I am using my airport extreme as a bridge for wireless printing (I currently have the AT&T U-Verse Residential Gateway as my router) and trying to use an external drive for both my imac and macbook for backup. I know I have accessed it a few times this way but now I get a message that says "can't find original item" or something to that effect. When I open the airport utility, I can see it as a disk, when I open finder, I click on my airport under shared and select my external drive and connect as me with the password. It takes a while to come up with the message cannot find original item. I can hear the external drive power up when I connect. Is there something I'm missing? I can plug it into both the imac and macbook directly and it works fine. I do have file sharing turned on. All suggestions appreciated. Thanks!

    I have a new question, and perhaps I am supposed to start a "new question":
    Actually, yes, you should if you want it to get the attention it deserves to solicate assistance from other users.
    I am setting up this shared hard drive and it has the option under airport utility to "share disks over the internet using Bonjour. I checked this box and it directed me to create a global hose name and password, which I did. So now that that is done, how do I actually access my "global hose" when connected over 3G or not at home? What do I type in safari to get to it?
    Interestingly, this option never seemed to ever get fully implemented as it required a combination of services that no one seems to offer. This service uses wide-area Bonjour.
    Also, if I want to access with a Windows computer, it asks for WINS Server info. No idea what to put in there.
    This option is not required so you can safely ignore it.

  • Time machine problems w/ external hard drive and airport extreme

    Time machine is keeping backup for only 6 days + the hourly backup. When I open time machine preferences, though, it appear that time machine is off. When turning it on it does not show my external hard drive (however, the backup has been running as mentioned above, for 6-day history). When I select other time capsule it shows the airport extreme but nothing can be done from then on.

    Time machine is keeping backup for only 6 days + the hourly backup. When I open time machine preferences, though, it appear that time machine is off. When turning it on it does not show my external hard drive (however, the backup has been running as mentioned above, for 6-day history). When I select other time capsule it shows the airport extreme but nothing can be done from then on.

  • Can a time machine usb drive backup the data from an external usb drive connected to and airport extreme*

    can a time machine usb drive conected to my mac book backup the data from an external usb drive connected to and airport extreme ?

    Hi Adam, if you think yoiur HD may be failing you could do a TM restore onto the new disk. I would rather see you do a clone either SuperDuper or CarbonCopy Cloner.Of your internal drive. That way you have a bootable backup in case it does fail.
    btw - what are the symptoms of your failing drive?
    -mj
    Message was edited by: macjack

  • How to connect a hard drive on Airport Extreme (second edition)

    how to connect a hard drive on Airport Extreme (second edition)? Does it need a special format? It is now fromat on FAT32, but i don't see it ??

    The USB port your Mac is high powered. The port on the AirPort Extreme is not.
    So, it tends to be borderline as far as its ability to supply sufficient power to a hard drive...even if the hard drive has its own power supply.
    Often, users...including me....need to use a powered USB hub when they attach any drive to the USB port on the AirPort Extreme.
    You might want to give that a try. Double check to make sure that the drive is formatted in FAT32 as well, since Windows NTFS or exFAT will not work with the AirPort Extreme.
    Powering down and restarting the entire network.....modem first, then router, etc.....is something that you would always want to do after any change or addition to a network.

  • How to deactivate a shared Hard drive on Airport Extreme - keeps sleeping

    was curious if anyone one knows how to temporally deactivate a shared Hard drive on Airport Extreme - keeps sleeping every 30mins and have to wait 12 second for the drive to spin up and wait for the beach ball to stop spinning. Getting really aggravating.... Thanks

    The external harddrive is NTFS format and someone from apple told me that it would have to be reformatted to be seen by the Extreme -- Needless to say with 33% of the hard drive filled, I do NOT want to reformat.
    Unfortunately, HDDs attached to the USB port of the AirPort Extreme, cannot be recognized by the AirPort if formatted in NTFS. If you do not wish to reformat this drive, you will either have to use a different drive or connect this drive to a Windows PC for sharing on the network.
    The AirPort can only share drives formatted in HFS+ or FAT32.

  • How do I get my computers to see my external hard drive on airport extreme?

    I jus purchased and airport extreme as although he directions say plug and play - it doesn't work.  None of my computers see my external hard drive when it is plugged into the airport.  Cannot locate directions with step by step support.  thank you. Nettie

    The external harddrive is NTFS format and someone from apple told me that it would have to be reformatted to be seen by the Extreme -- Needless to say with 33% of the hard drive filled, I do NOT want to reformat.
    Unfortunately, HDDs attached to the USB port of the AirPort Extreme, cannot be recognized by the AirPort if formatted in NTFS. If you do not wish to reformat this drive, you will either have to use a different drive or connect this drive to a Windows PC for sharing on the network.
    The AirPort can only share drives formatted in HFS+ or FAT32.

  • Is anyone using NETGEAR Push2TV with a MacBook Pro and AirPort Extreme and does it work well for you?

    I am interested in buying a NETGEAR Push2TV display TV streamer to use with my MacBook Pro and AirPort Extreme.
    I saw on the Netgear site that a Intel Wireless Display/WIFI driver software is required for PC's; do we have this software installed already on our MacBook Pro's? Is any one using this box and does it work well for you, any problems or setup issues?

    trying to find out same thing , store said works with new intel processor, My mini dont finding.....

  • File transfer speed in Shared USB Hard Drive via Airport Extreme

    I' am planing to buy one of this, but first I need to know what kind of file transfer speed I can expect when sharing USB drive via Airport Extreme 1000Mbps Ethernet.
    Thanks.
    Message was edited by: Robert81

    most likely 14m/sec but normally 10.5 this is ethernet wired and usb attached. wireless would be about 8M/sec
    Wired is good enough I use it for Finder copy frequently.

  • MacBook pro and airport extreme router. How to print wirelessly to an old HP wireless photosmart all in one printer

    With MacBook pro and airport extreme router, how can I print wirelessly to an old HP wireless photosmart all in one printer?  What is needed or what process?

    You need to make sure that the HP has an updated printer driver that works with 10.6 for that printer. You can check here:
    http://www8.hp.com/us/en/support-drivers.html

  • Are there any compatibility issues with Sonos and Airport extreme??

    are there any compatibility issues with Sonos and Airport extreme??

    Sonos uses its own priopietory wireless protocol SonosNet to distribute audio data among all its products, thus it should not affect other network devices which use standard WiFi 802.11a/b/g/n protocol at all though they may share the same radio channel for wirless signaling.
    On my dual-band (5 GHz / 2.4 GHz) Airport Extreme staion, I select the option "802.11n Only (5GHz) - 802.11n (2.4GHz)" and turn on "Use wide channels" in Wireless configuration in order to use only 802.11n protocol and more radio channels to achieve maximum wireless bandwidth of 400 Mbps. This bandwidth is necessary for quick Time Machine backup to NAS connected to the Airport Extreme station through Ethernet cable. So my iMac and MacBook Pro always connected to the Airport Extreme through 5 GHz radio channel with 802.11n protocol whereas my iPhone 4S always connected through 2.4 GHz radio channel with the same protocol.
    In my living room Sonos ZP-90 (same as new CONNECT model) zone player is connected to Airport Extreme directly through Ethernet cable (recommended by Sonos) and Sonos S5 (same as new PLAY:5 model) zone player in bedroom is connected wirelessly through SonosNet protocol to the ZP-90 zone player in living room.
    These devices are in operation simutaneouly most of the time. Music is playing through the Sonos ZP90/S5 zone players througout the day, I am streaming viedo through Internet (fibre broadband 25 Mbps) on my MacBook Pro in bedroom or iMac in living room or reading news on my iPhone. So far so good and have no encounter any interference problem for about three years. Further more bandwidth for 802.11n protocol does not seem to be affected at all.
    In fact with a low power Fujitsu USB drive (2.5" / 500 GB, designed for notebook) plug into USB port of Airport Extreme, it can be used as NAS drive for Sonos music distribution system without any problem. Just transfer all files from Music folder in my home directory on iMac into this NAS drive and set it up as music source in "Manage > Music Library Settings" in Sonos Controller for Mac application will do. Though the same drive can be served as Time Machine's backup disk as well, an independent full-fledged NAS drive for Sonos and Time Machine backup is better long-term solution for reliability and performance. With the NAS configured as sole music source, you do not need to keep any computer powered on all the time in order to play music through the Sonos system.

Maybe you are looking for