IOmeter doesn't see Storage Spaces vdisks

I've created vdisks (Storage Spaces- one simple and one parity) in Server 2012R2 and they show up in Server Manager, but IOmeter (2006.07.27) doesn't show them- only the physical disks show up. However, if I create a volume (and file
system) on the vdisk, then it shows up in IOmeter- but I've never had to do that before, and I've used IOmeter quite a bit. Is there something that needs to be done? Thanks.
4KB blocks Storage Spaces expose old I/O Meter has issues with. Stick with an NTFS-formatted volumes on top of your SS (what you do now) as in any case I/O Meter works with test file in file system pass-thru mode (FILE_FLAG_NO_BUFFERING + some others, easy
to check with FileMon utility) so there's no overhead to spoil up your testing result numbers. Good luck :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Similar Messages

Storage Space Server

If the space of the windows storage space server is full, is it possible to setup another windows storage space server and combine the new one to original storage pool?

Hi,
We cannot combine one storage space to another storage space. If one storage pool is full, we could additional storage to expand the pool.
For more detailed information, please see:
Storage Spaces: Understanding Storage Pool Expansion
http://blogs.technet.com/b/askpfeplat/archive/2013/09/25/storage-spaces-understanding-expansion.aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Storage space memory in PI

Hi Guys,
Can any one please let me know how to see storage space memory in PI. is there any transaction code ?
i need how much memory used and how much free space in my PI system...
Thanks,
Siva.

Hi Siva
Definitely you can use ST06 which will give you CPU, memory and disk utilization.
Use can use st02 to check the buffer size and number of swaps happening in your system.
One which i personally prefer as a PI developer is Persistance layer Analysis.
SXMB_MONI ->Persistance layer anaylysis.
Regards
Monika

Repair-VirtualDisk on Storage Spaces simple volume with retired disk?

Hello,
Does anyone know if it's possible to retire a disk from a Storage Space simple volume, and use the Repair-VirtualDisk commandlet to migrate any data off the retired volume? It sounds like this is how it would work for a parity volume, but it's unclear if
Windows will try to move data off a retired disk of a simple volume. Or is repair actually performing parity recovery?
i.e. I want to replace disks in a simple volume with larger disks, and remove the old disks, is creating a new volume and migrating data the only way?
Thank you!

Hi,
Simple spaces are not resilient to disk failures, so we cannot add a new physical disk to replace the failed physical disk.
If you have backed up the files in that virtual disk, you could delete the disk then remove physical disks from the pool.
For more detailed information, please see:
Storage Spaces - Remove Physical Disk
https://social.technet.microsoft.com/Forums/windowsserver/en-US/dbbf317b-80d2-4992-b5a9-20b83526a9c2/storage-spaces-remove-physical-disk?forum=winserver8gen
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone?

I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone? (the check marks are not bolded, does this mean they are not in my library but only on my phone?)

You uncheck the music in your iTunes library on your computer and along with sync only checked songs and videos selected under the Summary selection for your iPhone sync preferences with iTunes, only checked songs in your iTunes library will be transferred to your iPhone or remain on your iPhone and the unchecked songs in your iTunes library that are currently on your iPhone will be removed when syncing.
Or make use of iTunes playlists and choose selected playlists, albums, artists under the Music selection for your iPhone sync preferences with iTunes and select the playlists below that you want transferred to your iPhone.

I'm having probs backing up iPhone 5 to iCloud - just sits on the backing up screen with message 'estimated time remaining....' But goes no further and doesn't back up - wifi is fine and definitely enough storage spaces. Anyone have any ideas plea

I'm having probs backing up iPhone 5 to iCloud - just sits on the backing up screen with message 'estimated time remaining....' But goes no further and doesn't back up - wifi is fine and definitely enough storage spaces. Anyone have any ideas please?

You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up

HT201317 How do I see what is taking up so much of my storage space?

If Photo Stream does not use any iCloud storage, how do I find out what is taking up my storage space?

System preferences > iCloud > manage.

I downloaded Yosemite OS X and when I try to select my HD (the disk) where I want to install it, the hard drive doesn't have enough space. What can I do and still have all my files? I haven't backed up...

I downloaded Yosemite OS X and when I try to select my HD (the disk) where I want to install it, the hard drive doesn't have enough space. I have a MacBook Pro bought in 2008. What can I do and still have all my files? I haven't backed up...

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
I recommend that you also make a backup before proceeding. Just quit the installer.

Storage Spaces: Virtual Disk taken offline during file copy, marked as "This disk is offline because it is out of capacity", but plenty of free space

Server 2012 RC. I'm using Storage Spaces, with two virtual disks across 23 underlying physical disks.
* First virtual disk is fixed provisioning, parity across 23 physical disks: 10,024GB capacity
* Second virtual disk is fixed provisioning, parity across the remaining space on 6 of the same physical disks: 652GB capacity
These have been configured as dynamic disks, with an NTFS volume spanned across the two (larger virtual disk first). Total volume size 10,676GB. For more details of the hardware, and why the configuration is like this, see: http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/c35ff156-01a8-456a-9190-04c7bcfc048e
I'm copying several TB from a network share to this volume. It is very slow at ~12MB/sec, but works. However, three times so far, several hours in to the file copy and with plenty of free space remaining, the 10,024GB virtual disk is suddenly taken offline.
This obviously then fails the spanned volume and stops the file copy.
The second time, I took screenshots, below. The disk (Disk27) is marked offline due to "This disk is offline because it is out of capacity". And the disk in the spanned volume is marked as missing (which is what you would expect when one of its member disks
is offline).
I can then mark the disk (Disk27) back online again, and this restores the spanned volume. I can then re-start the file copy from where it failed. There doesn't appear to be any data loss, but it does cause an outage that requires manual attention. As you
can see, there is plenty of space left on the spanned volume.
Each time this has happened, there are a few event 150 errors in the System event log: "Disk 27 has reached a logical block provisioning permanent resource exhaustion condition.". Source: Disk.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="disk" />
<EventID Qualifiers="49156">150</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-06-07T11:24:53.572101500Z" />
<EventRecordID>14476</EventRecordID>
<Channel>System</Channel>
<Computer>Trounce-Server2.trounce.corp</Computer>
<Security />
</System>
- <EventData>
<Data>\Device\Harddisk27\DR27</Data>
<Data>27</Data>
<Binary>000000000200300000000000960004C0000000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>
This error seems to be related to thin provisioning of disks. I found this:
http://msdn.microsoft.com/en-us/library/windows/desktop/hh848068(v=vs.85).aspx. But both these Virtual Disks are configured as Fixed, not Thin provisioning, so it shouldn't apply.
My thoughts: the virtual disk should not spuriously go offline during a file copy, even if it was out of space. And in any case, there is plenty of free space remaining. Also, I don't understand the reason for why it is marked as offline ("This disk is offline
because it is out of capacity"). Why would a disk go offline because it was out of thin capacity, rather than just returning an "out of disk space" error while keeping it online.

Interesting Thread, I've been having the same issue. I had a failed hardware RAID that was impossible to recover in place, so after being forced to do a 1:1 backup, I find myself with 5 2TB hard drives to play with. Storage Spaces seemed like an interesting
way to go until I started facing the issues we share.
So my configuration is A VM Running Windows Server 2012 RC with 5 Virtualized Physical drives using a SCSI interface, 2TB in size that make up my storage pool. A Single Thinly provisioned Disk of 18 TB (using 1 disk for parity)
Interestly enough, write speed has not been an issue on this machine (30~70MB/s, up from 256k on the beta)
Of note to me is this error in my event log 13 minutes before the drive disappeared:
"The shadow copies of volume E: were deleted because the shadow copy storage could not grow in time.Consider reducing the IO load on the system or choose a shadow copy storage volume that is not being shadow copied."Source: volsnap, Event ID: 25, Level: Error
followed by:
"The system failed to flush data to the transaction log. Corruption may occur in VolumeId: E:, DeviceName: \Device\HarddiskVolume17.(The physical resources of this disk have been exhausted.)"Source: Ntfs (Microsoft-Windows-Ntfs), Event ID: 140, Level: Warning
I figure the amount of space available to me before I start encountering physical limits is in the vicinity of about 7TB. It dropped out for the second time at 184 GB.
FYI, the number of columns created for me is 5
Regards,
Steven Blom

How to clear "other" storage space

How do you clear storage space taken up by "other"?

To do that you will need to restore your phone:
If You Are Locked Out, Have Forgotten Your Passcode, or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
4. What to Do If You've Forgotten Your iPhone's Passcode
5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the
          Back Up option. If you have just backed up the device, it is not necessary
          to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup. If you do not have a
          backup to restore or have forgotten your restrictions passcode, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

TSV_TNEW_PAGE_ALLOC_FAILED - No more storage space available for extending

Hi
Im SAP-BW Consultant. I need some code in the transfer rules. But while im loading data , im getting "No more storage space available for extending an internal table.
Pls check my code and modify it so that i can load the data of 5,000,00 records
TYPES: BEGIN OF tys_TG_1,
                     /BIC/ZIUTILICH           TYPE /BIC/OIZIUTILICH,
                   /BIC/ZIRGRCH           TYPE /BIC/OIZIRGRCH,
                   /BIC/ZPRODUCT           TYPE /BIC/OIZPRODUCT,
END   OF tys_TG_1.
TYPES: tyt_TG_1        TYPE STANDARD TABLE OF tys_TG_1
                                                 WITH NON-UNIQUE DEFAULT KEY.
data: e_s_result type tys_TG_1.
data: e_t_result type tyt_TG_1.
DATA : ITAB1 TYPE STANDARD TABLE OF /BIC/AZDSO_HYD00.
DATA : WA_ITAB TYPE /BIC/AZDSO_HYD00.
loop at RESULT_PACKAGE into e_s_result.
     Select /BIC/ZIUTILICH /BIC/ZIRGRCH /BIC/ZPRODUCT                                               FROM       /BIC/AZDSO_HYD00 INTO
                                (e_s_result-/BIC/ZIUTILICH,
                                e_s_result-/BIC/ZIRGRCH,
                                 e_s_result-/BIC/ZPRODUCT)
                             WHERE
                             COMP_CODE = e_s_result-COMP_CODE AND
                             PROFIT_CTR = e_s_result-PROFIT_CTR .
          append e_s_result to e_t_result.
     endselect.
         clear e_s_result.
ENDLOOP.
refresh RESULT_PACKAGE.
move e_t_result[] to RESULT_PACKAGE[].
So im getting TSV_TNEW_PAGE_ALLOC_FAILED - No more storage space available for extending an internal table..
I think there is a problem in the code. pls look it and modify it.
Regards
kumar

Hello Kumar,
The amount of data you can store in an internal table is limited by the width of the table together with the available memory on your machine. If you try to put too much data in your table you'll always get that problem.
As I see it you have a table RESULT_PACKAGE with some fields and based on the entries in that table you select one row out of another table.
You can easily use
Select
/BIC/ZIUTILICH /BIC/ZIRGRCH
/BIC/ZPRODUCT FROM
/BIC/AZDSO_HYD00
INTO TABLE e_t_result
FOR ALL ENTRIES in RESULT_PACKAGE
COMP_CODE = RESULT_PACKAGE-COMP_CODE AND
PROFIT_CTR = RESULT_PACKAGE-PROFIT_CTR .
That still doesn't solve your memory problem hence you should try to process the data in packages, because you obviously don't have enough memory to process all data at once.
You can add the following:
Select
/BIC/ZIUTILICH /BIC/ZIRGRCH
/BIC/ZPRODUCT FROM
/BIC/AZDSO_HYD00
INTO TABLE e_t_result
PACKAGE SIZE xxxx
FOR ALL ENTRIES in RESULT_PACKAGE
COMP_CODE = RESULT_PACKAGE-COMP_CODE AND
PROFIT_CTR = RESULT_PACKAGE-PROFIT_CTR .
PROCESS your data here
ENDSELECT.
You might also want to discuss the issue with your basis team if there is a way to get more memory if there is no way to do that process.
Hope that helps,
Michael

Thread creation error: Not enough storage space

Hi,
Recently (the past week or so), my desktop client for Skype has been crashing regularly. This is accompanied by large (over 1.2GB) amounts of memory usage. At semi-regular intervals (say every few hours), Skype will post an error with the text "Thread creation error: Not enough storage space..."
I am using the latest build of Skype. I am not performing any Skype logging. This error is clearly an ongoing issue which has not been addressed, as prior threads have discussed this as well.

Errors like this have been addressed and continue to be addressed. Being that the errors are related to memory leakage of one form or the other, the problem can have several sources and be agitated by several programs. I personally run the latest version on all my machines in a 24/7 capacity and have not run into the problem. Some versions in the past created a similar error for me, yet the latest has not. If you've already updated your IE's flash and that has not alleviated the problem, the only other solution is running an earlier release that doesn't crash for you or restart Skype more often. I've had virtual video devices trigger this behavior by simply launching the video settings once. The virtual device even when not in use continued to consume memory under Skype until it crashed. So if you use any virtual audio/video components you may want to remove them to see if that changes anything. Some people have also blocked ads when those were the source.
http://community.skype.com/t5/Windows-desktop-client/low-storage/m-p/3974193/highlight/true#M344826

I movie is not responding. I have tried deleting storage space to no effect. Does anyone else have this problem?

i movie is not responding I have tried deleting storage space to no effect. Does anyone else have this problem ?

If you are positive there is a good Wi-Fi signal in the area of the iPad I would first reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
If that doesn't work, I would turn off your iPad and then restart your Wi-Fi router. Unplug the router for 30 seconds then plug it back in. Once the router had completed its restart process and established a link to the Internet then turn your iPad on. Make sure Settings > Wi-Fi> On.

"Cannot Download - There is not enough available storage space."

When attempting to update apps, I receive an error message
"Cannot Download - There is not enough available storage space."
When I Go to settings, there is 10.6 GB available
What is the deal?
Thanks in advance
Mark

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Your Time Capsule disk is low on storage space - error

I am getting the error "Your Time Capsule disk is low on storage space." and it now flashes amber. I use the time capsule to set up a wireless network and I can no longer access the internet from my MapBook Pro in another room, only if I am next to the Time Capsule. Help!!! Why is my time capsule low on storage space? I thought it is suppose to delete the old backups to make room for the new backups.

MacDoz wrote:
I too am getting the same low disk space issue on my Time Capsule, and have not been able to find an answer anywhere given that I thought the Time Capsule was meant to automatically delete old back-ups.
Those are two different, independent, things.
Since you can use a Time Capsule for things besides backups, there's a built-in warning (the flashing light) when it gets near full (exactly how full is not clear).
Time Machine is separate; when it doesn't have space for a new backup, it will delete the oldest backup(s) as necessary, if it can, to make room for new ones.
The handling is a bit different, though, for Leopard vs. Snow Leopard.
In Leopard, if you have the +Warn when old backups are deleted+ box checked in Time Machine Preferences > Options, it will fail with a message. All you have to do is remove the check.
In Snow Leopard, it will delete old backups as necessary, do the backup, then send a message if you have the box, now worded +Warn after old backups are deleted,+ checked.
See #C4 in Time Machine - Troubleshooting for details.

IOmeter doesn't see Storage Spaces vdisks

Similar Messages

Maybe you are looking for