IOP application storage requirements in Oracle

Are there any recommendations regarding database space( size in GigaBytes ) for an IOP dedicated schema? I did not find any recommendations in the Install Guides (pdf) for 4.03 or 11.1.2.0.
I have seen Oracle backups that range from 2GB to 80GB, but don't know how large that is when stored in an Oracle database.
Is there a recommended starting setting for the dedicated Oracle Schema for an IOP application?
What is a good starting "grow by" setting for the IOP dedicated Oracle Schema?
If there are any documents available which contain recommended specifications for the IOP dedicated Schema, please direct me to them.
Thank you.

We do not have any sizing document for now and it is a work in progress. The main focus should be on the number of member combinations (or the number of blocks) and the size of each block. This is also multiplied by the number of scenarios in the system. Sometimes the application rowsources contain lot of data and they replicate data from external sources. To avoid that one needs to consider using table-driven or custom rowsource, in particular, if the rowsource is read only. Also, frequent purging of old scenarios should be considered and there are commands to achieve them.

Similar Messages

  • Application Storage Issue

    Hello,
    A̶̲̥̅♏ having issue with my device being slow because the application storage memory ΐƨ almost full, i tried moving my apps to my media card but couldn't do that. ΐƨ there anyway this can be done? Please help .

    No the apps cannot be moved onto a other storage device because it requires RAM memory which of course the sd card does not have.

  • Pre-requisite packages required for Oracle R11i

    Hi Gurus,
    I am new to DBA.I am working with oracle 11i cloning.In that task is to pre-clone from source system(os:Red Hat-4.0) and do post clone in target system in which I installed new os(os:Red Hat-4.0).
    Here I need your help.What are all the pre-requisite packages required for Oracle R11i before configuring the Target System and how to apply the pre-requisite packages.
    Could you please help me.
    Thanks
    Vinoth

    Hi;
    Here I need your help.What are all the pre-requisite packages required for Oracle R11i before configuring the Target System and how to apply the pre-requisite packages. Imagine you are making new installation on your target server. So you need to check all pre-req which is mention in below notes. You need to have all rmp hosts file edit and some other steps.
    Please see:
    Subject: Recommendations to Install Oracle Applications 11i Doc ID: 294932.1
    Oracle Applications 11.5.10 - Installation Update Notes for Linux x86, Solaris SPARC, MS Windows, HP-UX PA-RISC, HP-Tru64, IBM AIX - B13590-01 [ID 287453.1]
    Oracle Applications Installation Update Notes, Release 11i (11.5.10.2) [ID 316806.1]
    PS: I suggest also see my blog http://heliosguneserol.wordpress.com/2010/05/31/cloning-oracle-applications-release-11-and-12/
    Regard
    Helios

  • Veritas required for Oracle RAC on Sun Cluster v3?

    Hi,
    We are planning a 2 node Oracle 9i RAC cluster on Sun Cluster 3.
    Can you please explain these 2 questions?
    1)
    If we have a hardware disk array RAID controller with LUNs etc, then why do we need to have Veritas Volume Manager (VxVM) if all the LUNS are configured at a hardware level?
    2)
    Do we need to have VxFS? All our Oracle database files will be on raw partitions.
    Thanks,
    Steve

    > We are planning a 2 node Oracle 9i RAC cluster on Sun
    Cluster 3.Good. This is a popular configuration.
    Can you please explain these 2 questions?
    1)
    If we have a hardware disk array RAID controller with
    LUNs etc, then why do we need to have Veritas Volume
    Manager (VxVM) if all the LUNS are configured at a
    hardware level?VxVM is not required to run RAC. VxVM has an option (separately
    licensable) which is specifically designed for OPS/RAC. But if
    you have a highly reliable, multi-pathed, hardware RAID platform,
    you are not required to have VxVM.
    2)
    Do we need to have VxFS? All our Oracle database
    files will be on raw partitions.No.
    IMHO, simplify is a good philosophy. Adding more software
    and layers into a highly available design will tend to reduce
    the availability. So, if you are going for maximum availabiliity,
    you will want to avoid over-complicating the design. KISS.
    In the case of RAC, or Oracle in general, many people do use
    raw and Oracle has the ability to manage data in raw devices
    pretty well. Oracle 10g further improves along these lines.
    A tenet in the design of highly available systems is to keep
    the data management as close to the application as possible.
    Oracle, and especially 10g, are following this tenet. The only
    danger here is that they could try to get too clever, and end up
    following policies which are suboptimal as the underlying
    technologies change. But even in this case, the policy is
    coming from the application rather than the supporting platform.
    -- richard

  • Smart Storage requires hard drives before configuration

    (From Davin Oishi)
    Issue/Question: Unit powers up,  but can't login to web administration GUI
    Resolution: The Cisco  Smart Storage products require at least one hard drive to be installed  in the system before configuration is allowed
    Issue/Question: Why does the  Smart Storage require a hard drive to be installed when my previous  NSS3000 did not require a hard drive before configuration could be made
    Resolution:  The architecture for both product families is different.  While  configuring a device without drives does provide the ability to  configure basic settings before deployment.  The actual usefulness is  still limited to when the device has drives.  Smart Storage takes  advantage of the drives by placing configuration and applications on the  hard drives.  If additional drives are installed after initial setup,  configuration information is striped across the additional drives as you  add them.  This allows for better utilization of Smart Storage memory,  improves system performance, and allows for higher scalability.

    With eSata not going to be an option for all 3 drives. I'll use eSATA for the 2 TB and daisy-chain the other 2 with FW800
    I'll use the 500GB for Time Machine, but which would be the better plan?
    A) Put stills on the 1TB and use the 2TB for FCE scratch drive and back up the compressed camera data on DVD's
    B) Use the 1 TB for camera data and then either folders or partition the 2TB for camera imports and FCE scratch drives,
    In either plan the AVCHD files get converted at log and transfer and the h264 data gets converted via 3rd party conversion software. In both cases the converted files end up on the scratch drive.
    I should also mention that I plan to use QT not self contained exports and keep them on the internal drive. I am currently keeping disk images of finished projects on an external hard drive, unsure what to do with them. maybe I need an other drive or not bother with saving disk images ?

  • OIM Data storage requirements

    I was wondering if there are any thumb rules to determine how much data will OIM generate. Is this dependant on number of user profile for any given number of transactions. Also, if this data can be broken into different categories such as identity data, provisioning data, audit-trail data etc?
    We are in middle of defining our data archival strategy and need to understand data storage requirements.
    Thanks in advance for your input on this.

    user7749985 wrote:
    I was wondering if there are any thumb rules to determine how much data will OIM generate. http://www.oracle.com/technology/products/id_mgmt/oxp/pdf/oracle%20identity%20manager%20sizing%20version%201.3.pdf
    Is this dependant on number of user profile for any given number of transactions. Yes it is.

  • Installation Requirements for Oracle Apps Forms and Report Services OEL

    Hi all.
    Where can i find detail information about the installation requirements for Oracle Application Server Forms and Report Services under OEL 4 (Oracle Enterprise Linux) or OEL 5?
    It seems there's only information about Oracle Application Server in general, not the reduced or partiuclar distribution, Forms and Reports Services.
    Thanks in advance ....!

    I already saw the documentation for Forms and Reports Services Installation.
    This thread is about the specific requirements, if any, for this product on OEL 5 or OEL 4.
    See, there's a note on Metalink(546174.1) regarding some specific issues about installing Oracle Application Server on OEL5, but i'm not sure if this involves Oracle Application Server Forms and Reports Services.
    The idea is to know if these issues applies to this specific distribution .
    Hope you understand my question now. Thanks in advance

  • OFT- Recording Application which require User Authentication

    hi,
    I have recorded the application which requires user authentication and once the recording has been done i have logout from the application. and now if i playback the script ,then again it will playback from the login page.
    So according to my opinion,it should skip the login page at the time of playback the script. But it is not. So what would be the reason for that?

    Actually i have a confusion regarding this note given in the "OFTFunctionalTestingUserGuide pdf"
    "If you record a Visual Script with a login Web page (not a popup dialog box), which may not reappear when you revisit the site due a session cookie, Oracle Functional Testing for Web Applications recognizes the cookie and skips the login page during playback. Oracle Functional Testing for Web Applications logs a message indicating the
    login page was skipped and playback continues with the next page."
    If i m not wrong, when we record the process of visiting the pages on the site from login to log out from the site.
    and when we run the playback scirpt it should be not start from the login page as per the above mentioned note.
    Could u please help me to understand the fact given on the note.
    Thanks
    Mamta

  • Adobe Application Manager, required to start your trial, is missing or damaged

    I have just bought Adobe CC years membership, i have downloaded CC application manager, i have also downloaded InDesign.... when i click to open the application manager it says that the application manager required to start the trial is missing or damaged? one its not a trial and two how can i fix it? I had re installed creative cloud as that is the application manager but still no luck? any ideas guys ...... PLEASE HELP!!

    did you download application manager from that link?
    if yes, did you install application manager after downloading?

  • SQL Server 2008 Express R2 exceeds the storage capacity of Oracle XE

    Hello, here is a novelty: SQL Server 2008 Express R2 exceeds the storage capacity of Oracle XE, XE you still limited to 4GB of data from, the competition gets better and offers a bit more, XE remains the same, hopefully Oracle 11g XE exceeds storage and memory to SQL Server.
    [http://www.microsoft.com/express/Database/]
    Roberto.
    Edited by: rober584812 on Apr 27, 2010 5:09 PM
    Edited by: rober584812 on Apr 27, 2010 5:09 PM

    Yes, I do good work is correct, I have not thought to migrate from Oracle XE to SQL Server Express because it could not work with the flexibility of PL / SQL and other Oracle features own, however, SQL Server 2008 R2 Express if takes the lead XE in storage, at which Oracle Corp. will match or exceed, offer more storage in response to competition and not only compensate for the limitation of 4GB with Excellency good features.
    Roberto.

  • Apple application support was not found apple application is required to run ituneshelper please un istall itunes then install itunes again erro 2

    I can't install itunes for windows 7 to 64bit i tried several times and at the end show up this...
    "apple application support was not found apple application is required to run ituneshelper please un istall itunes then install itunes again erro 2" ..so what it does mean? ..can somebody help me for this please? thanks

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • HT201628 When I try to access my itunes icon from my computer it get Apple Application support was not found.  Apple Application support required to run itunes.  It then say uninstall itunes, then install itunes again.  what do i do and will i lose all my

    When I try to access Itunes Icon on my dell computer I get an Apple application support was not found.  Apple application support required to run Itunes, and say uninstall itunes, then install itunes again.  It used to work.  What do I do?

    I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and  some people said that they worked.
    Here is the original Link:
    https://discussions.apple.com/thread/2151777?start=0&tstart=0
    OK, this worked for me:( Original Post by r0tt3n4pp13)
    1. Save iTunes install file to your desktop.
    2. Disconnect from internet.
    3. Disable Firewall/Security software.
    4. Run install. Note that it installs Application Support and a bunch of other software this time.
    5. Run iTunes.
    6. Enable Firewall/Security software.
    7. Reconnect to internet.
    8. Download Watchmen Director's Cut post haste.
    OR!
    (Original post by Cr4z33)
    1. Download and install WinRAR.
    2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
    3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
    4. Done! You can now run iTunes normally.

  • Adobe photoshop and illustrator aren't opening; Adobe Application Manager required but I already have application manager?

    My adobe photoshop and illustrator aren't opening; this message appears "Adobe Application Manager, required to start your trial, is missing or damaged." even though I already have application manager? help please
    I am using MAC OS
    ps: I already tried these solutions and none of them have worked
    -delete adobe manager and download it again
    -use the adobe cleaning tool
    -delete photoshop and illustrator and re download them
    -updated my OS

    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • When i try to open itunes on windows keeps saying apple application is required to run itunes error 2 windows error 2

    when i try to open itunes on windows keeps saying apple application is required to run itunes error 2 windows error 2

    You could try downloading and installing 7-Zip (free) and downloading a fresh copy of the iTunes installer, unpack the installer into its components using 7-Zip then try a standalone install of AppleApplicationSupport. It may still fail to install but if so you may get useful error messages as to why not.
    tt2

  • How do I correct the silverlight application storage error to watch netflix movies?

    I get a Silverlight application storage error when attempting to watch an instant netflix movie. Following instructions of error message does not correct. Instant movies play properly with Explorer - but not Firefox.

    o resolve this error, you will need to update Silverlight application storage:
    1. From within the Silverlight player, right click.
    2. Click Silverlight.
    3. In the window that appears, click the Application Storage tab.
    4. In the next window, click the "'Enable application storage" checkbox.
    5. Click the "Delete all' button.
    6. Click Yes.
    7. Click OK.
    8. Click your browser's Refresh or Reload button to continue.

Maybe you are looking for