IOS 15.0(2)SE1 an higher not loadable on WS-C2960S-FPS-L with Bootloader 12.2.(53r)SE

Hi
I have three switches WS-C2960S-FPS-L with IOS 12.2(55)SE6, which I would like to upgrade to 15.0(2)SE6.
Switch is in reboot cycle after starting with new IOS.
...done Initializing flashfs.
Checking for Bootloader upgrade..
Boot Loader upgrade not required (Stage 2)
%Software-forced reload
Buffered messages:
Queued messages:
Mar 30 01:27:39.897: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
*Mar 1 00:00:18.250: Read env variable - LICENSE_BOOT_LEVEL =
Mar 30 01:27:38.283: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2960s_lanbase Next reboot level = lanbase and License = lanbase
Mar 30 01:27:38.540: %CRYPTO-0-SELF_TEST_FAILURE: Encryption self-test failed (Software self-integrity test)
Mar 30 01:27:38.807: %CRYPTO-0-SELF_TEST_FAILURE: Encryption self-test failed (RBG: unable to initialize rbg)
Mar 30 01:27:38.807: %CRYPTO-0-SELF_TEST_FAILURE: Encryption self-test failed (SP 800-90 DRBG)
: Unexpected exception to CPUvector 2000, PC = 1CA83C8
-Traceback= 0x1CA83C8z 0x1CA83C8z 0x4C72FCz 0x1340B74z 0x1340D34z 0x1340E50z 0x38A1F8z 0x38A66Cz 0x1CA9684z 0x1CA3DD8z
: Unexpected exception to CPUvector 2000, PC = 13802F4
-Traceback= 0x13802F4z 0x1576500z 0x1CA9684z 0x1CA3DD8z
If I upgrade only to 15.0(2)SE, the switches are booting fine. I've tried alos other IOS versions above 15.0(2)SE, always same problem.
I think it has something to do with the current Bootloader:
ROM: Bootstrap program is Alpha board boot loader
BOOTLDR: C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(53r)SE, RELEASE SOFTWARE (fc3)
The switches where the upgrade is not working, have all the above bootloader.
I have another switch of the same type with bootloader:
BOOTLDR: C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(55r)SE, RELEASE SOFTWARE (fc1)
Upgrading this one is no problem.
Version 15.0(2)SE1 is first version which are FIPS certified.
Any suggestions?
Regards
Peter

I also tried c2960s-universalk9-tar.152-1.E3. I know that bootloader will upgrade automatically, but it doeas not upgrade when bootloader is
BOOTLDR: C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(53r)SE, RELEASE SOFTWARE (fc3)
message on console:
Checking for Bootloader upgrade..
Boot Loader upgrade not required (Stage 2)
%Software-forced reload
see file Loop_2960S_15_02.txt attached
If I try a switch with already newer bootloader also same serie 2960S, upgrade is working with all this IOS releases.
Bootloader was
BOOTLDR: C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(55r)SE, RELEASE SOFTWARE (fc1)
see file Log2960S_15_02_OK.txt attached
This is why I think it has something to do with the bootloader already running on the switch. The first version which does not work with old bootloader is the first version with FIPS.

Similar Messages

After ios 5 update, bluetooth on ipod touch not funcioning-keynote app no longer pairing with ipad

Since the ios 5 update--bluetooth longer funcioning on ipod touch. iPad no longer syncing with keynote remote app on ipod touch. My iPad no longer sees the iPod touch. The Bluetooth indicator does not come on or flash on the ipod touch.
any help or suggestions?

alex.g wrote:
I've got a fix, even for those who don't have hotspot (like me) who want to get the ipad and iphone talking over bluetooth again.
First, I should say that I said when I got my 4s, the problem was solved. It was not. I was just connecting via wifi, but I wanted bluetooth back.
Here is how I got it back without hotspot.
1. Launch keynote on one device and the remote on the other as you normall would.
2. Find another app that bluetooth links ipad and iphone (I used 'pictransfer light'). Install on both devices and launch on both devices. Follow the promt to get a bluetooth sync.
3. Double push the home button both devices to pull up the multi-tasking and open keynote and keynote remote on the relevant devices.
4. In keynote, go to settings; advances; remote. You should now be able to get the remote to link (you may, on the device running the remote, need to hit settings and then 'new keynote link'.
Once I launched pictransfer, the bluetooth logo was blue on both devices the whole time I ran through the other steps. I suspect that that was also the point of using the hotspot service.
Also noteworthy: I am yet to try this 'in the field'. For all I know, this won't keep a connection for as long as one might need. I'll find out on Thursday when I rely on the remote for 90min. On the positive side, I was able to keep the connection even when I double clicked home and closed pictransfer while leaving keynote and keynote remote open...
This work-around worked -- I found that as long as I launched the "Pictransfer for iPad Lite" app just before the presentation that it seemed to work fine. However, if Bluetooth gets turned off or you disconnect I think you will have to repeat the work-around -- nice find.
Apple really needs to fix this. They even have a posted document describing how to link two devices by Bluetooth and the truth is that it just does not work as they say. They need to add whatever code into the Keynote & Keynote Remote apps to initiate bluetooth to connect the devices. It's fine if it prefers WiFi, but it should give you the bluetooth option as well.

Ipod touch 2nd gen and have ios 4.2.1. apps that will not download, higher ios version needed

I have an ipod touch 2nd gen and have ios 4.2.1. I recently tried to download some apps and received a message that said I need a higher ios version (like 4.3 or higher). I know there used to be apps that worked before but I deleted them. When I tried to re-download them again they say they won't work. Options?
Thanks
Westy

Import the older versions to the iTunes library from your computer or a backup of it, or buy a newer device, or give up.
(72621)

Im using iphone 4 uk unlock , it has ios 4.2.1 and it does not have software update option.Now i want to update the phone with latest ios is it possible and tel me how ?

Im using iphone 4 uk unlock , it has ios 4.2.1 and it does not have software update option.Now i want to update the phone with latest ios is it possible and tel me how ?

The update to iOS 5.0 & higher is an erase/restore deal, so make sure you follow the directions here to update your phone:
http://support.apple.com/kb/ht4972
iOS 7.0.4 will be installed.

HT4972 Hi All can some outline to me the steps involved in updating my iphone from iOS 4.2.1 to a higher version,its a 3GS

Hi All can someone outline to me the steps involved in updating my iphone from iOS 4.2.1 to a higher version,its a 3GS

Please read and follow the instructions of the Apple link you posted from. Please note, if you have a 3G as opposed to a 3GS, you can not upgrade above iOS 4.2.1.

I have ipod touch MC086HN, i'm still on ios 4.2.1. I am not able to update my ios.

I have ipod touch MC086HN, i'm still on ios 4.2.1. I am not able to update my ios. Can somebody help?

If you are using IOS 4, you need to connect to iTune (computer) to update software.
Update to IOS 5 or higher
http://support.apple.com/kb/HT4972

After trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808

HT4623 I updated my iPhone 5S to iOS 7.0.2 and iBooks will not load anything from the Store and Safari keeps crashing

I updated my iPhone 5S to iOS 7.0.2 and iBooks will not load anything from the Store- I cannot search or even view my purchases.
Also Safari keeps crashing. I have shut down the phone and restarted it twice and that hasn't helped. Any ideas?

Libellen wrote:
I updated my Iphone 5s with IOS 7.0.5
The Update would not have Installed if it was not suitable for your Device.
Libellen wrote:
... anyhowe the phone is now totaly "dead" and will not turn on
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
This should take all the music off your phone .Then you can resync the music back on to it.
If this doesn't work maybe a restore to factory settings and start from scratch is the way to go

I changed my Apple ID that using an invalid email address to a new one and I am trying to update iCloud account on iPhone5 with iOS 7.1.2, and I am not able to delete iCloud account without the old password.

I changed my Apple ID that using an invalid email address and I am trying to update iCloud account with my new Apple ID on iPhone 5 with iOS 7.1.2. I am not able to delete iCloud account without the old password. Is there a way to update the Apple ID of my iCloud account?

Many people are having probalems with this right now. The only solution I've seen that seems to consistently work is the one posted by Brackers28 here: https://discussions.apple.com/message/23020591#23020591. This only works if you still have access to your old email account. If you don't, you'll have to have Apple help you reset the password for your old account so you can turn off Find My iPhone and sign into your account with your correct ID.

I have garagaband for iOs in my iPhone 4S, I connect my squire iOs guitarr to the iPhone, I select a Guitar Amp at the GB app then I Only can tune the guitar but I m not able to make the guitar ring with the amps. May some one help me?

I have garagaband for iOs in my iPhone 4S, I connect my Squire iOs guitarr to the iPhone, I select a Guitar Amp at the GB app then I Only can tune the guitar but I m not able to make the guitar ring with the amps. May some one help me?

You got the new iphone????? I have same problem. I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was). Have you found a solution????? I even tried to change import settings on format transfer but hasn't worked.

I installed ios 7 in iphone 4 - i am not able to create event in calender , icon is not active

i installed ios 7 in iphone 4 - i am not able to create event in calender , icon is not active

You will have to upgrade your operating system version and possibly your whole computer. We cannot provide more information easily until we know more about your system.
Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac", then "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
Apple does tell you about required equipment for the iPhone -- in 8 point medium gray type on a light gray box. The Store associates kind of automatically assume everybody is running a new model computer and the one I met when we bought our iPhone had never seen a pre-2008 Mac and was somewhat puzzled why anybody would own such an antique.

Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of '

When I deploy the cube which is sitting on my PC (local) the following 4 errors come up:
Error 1 The datasource , 'AdventureWorksDW', contains an ImpersonationMode that that is not supported for processing operations.  0 0
Error 2 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Adventure Works DW', Name of 'AdventureWorksDW'.  0 0
Error 3 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Customer', Name of 'Customer' was being processed.  0 0
Error 4 Errors in the OLAP storage engine: An error occurred while the 'Customer Alternate Key' attribute of the 'Customer' dimension from the 'Analysis Services Tutorial' database was being processed.  0 0

Sorry hit the wrong button there. That is not entire solution and setting it to default would work when using a single box and not in a distributed application solution. If you are creating the analysis database manually or using the wizard then you can
set the impersonation to your heart content as long as the right permission has been set on the analysis server.
In my case I was using MS Project Server 2010 to create the database in the OLAP configuration section. The situation is that the underlying build script has been configured to use the default setting which is the SQL Service account and this account does
not have permission in Project Server I believe.
Changing the account to match the Project service account allowed for a successful build \ creation of the database. My verdict is that this is a bug in Project Server because it needs to include the option to choose impersonation when creating the Database
this way it will not use the default which led to my error in the first place. I do not think there is a one fix for all in relations to this problem it is an environment by environment issue and should be resolved as such. But the idea around fixing it is
if you are using the SQL Analysis server service account as the account creating the database and cubes then default or service account is fine. If you are using a custom account then set that custom account in the impersonation details after you have granted
it SQL analysis administrator role. You can remove that role after the DB is created and harden it by creating a role with administrative permissions.
Hope this helps.

HT4623 will the ipad 1st generation take updates past ios 5.1.1? i have not been able to update to ios 6.

Will the 1st generation Ipad take updates past ios 5.1.1? I have not been able to update to ios 6.

5.1.1 is the highest for the first generation iPad.

I have a ipad 3 with ios 5.1.1 and it will not update to ios 7. I keep getting a software failed message and the download takes 13 hours and stops half way through. Any help?

I have an ipad 3rd gen with ios 5.1.1 and I can not update it to ios 7. It will take 13hours and when I try it stalls out halfway through and says software update failed. I have tried everything. Any help?

it actually needs more space than that. The file size is your 65 mb is probably the ota incremental file size. The full package is 700 mg, and the system needs 3 gig of free space to unpack and install.
There is a fairly good discussion here
https://discussions.apple.com/message/23680750#23680750

IOS 15.0(2)SE1 an higher not loadable on WS-C2960S-FPS-L with Bootloader 12.2.(53r)SE

Similar Messages

Maybe you are looking for