IOS 4.3.1 + Exchange 2010 "was" fine with the mailbox on Ex2007 server

Hi,
i had used my iphone with ios 4.3.1 and active sync.
The mailbox was hosted on the old exchange 2007 server.
A new exchange 2010 server was running the last 4 weeks and the iphone was connection with activesync against the new exchange 2010 through local wlan and over internet.
After i moved my profile to the new server i can´t connect anymore to the new server!
Any idea what happend?

It was working fine the last weeks with my mail account sitting on exchange 2007.
Today i moved several mailboxes from exchange 2007 to 2010 SP1.
I have some domain accounts that are created new and had their mailbox created on the exchange 2010 sp1 system.
With these accounts i can connect and retrieve mails.
But with my account (moved from 2007 to 2010) i can´t.
All i get is a blank mailbox on my iphone.
I even removed the mail account from my iphone and recreated the account.
But it won´t retrieve mails.
I refresh the offline addressbook at the exchange 2010 but nothing will help.
Message was edited by: juergenb52

Similar Messages

I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

I know what your'e going through, Gary.   OSX 10.6.7 is an absolute disaster.   Since I upgraded, I've had problems in FCP, Logic, Garageband, even issue dealing with peripheral hardware like external monitors.
Before 10.6.7 my system was running fine.
I've brought this up with Apple repeatedly.   They smile and shrug.   They've been helpful resolving the issues, but none of them has been easy to solve. I have spent days, dealing back and forth with tech support, sending logs, etc., before solutions have been found.
I wish I could give you an answer to your question.   My only guess is that Apple has totally dropped the ball on this one.   In the future they should provide a disclaimer when they offer an upgrade. Something like:   "Caution: all of your software may not function after this upgrade. But go ahead, you'll feel cool that your OS is the latest thing."
As someone who has been with Apple for close to 25 years, I'm disturbed by what appears to be an increasing sloppiness in their work.   This is especially disturbing when you depend upon their system to make your living.
Good luck.
david

IMovie (v4) jerky video with 10.5 was fine with the original 10.3

I can't download any usable video from my video camera to my computer now that I have OS 10.5. It used to work when I had 10.3 as my O.S. How do I get my system running better because it seems like it is a problem with processor speed, or should my system be able to run 10.5 and iMovie?
Some help from Apple appreciated.

In generic terms, call it a lack (or loss) of system resources.
I haven't done a head to head comparison, but 10.5 likely uses more processor (and ram) than 10.3.
Any LT has a slow HD (5400rpm) compared to a desktop HD (7200rpm)
Video is drive and ram intensive, especially if you are trying to use imovie HD.
I found 1080 HD video on my dual 1.42 could, and often was, jerky, even if nothing else was running. 720 was its limit, even them, couldn't be too long, or the jerkiness returned.
Some things to check:
How much free drive space do you have?
On my G4, I had to keep at least 20% free, or the machine became very slow.
Run the maintenance crons, either manually, or using macjanitor, cocktail, or similar.
Check activity monitor for free/used ram, processes running that you may not need, etc. For example, my kodak software installed a "wireless listener" but I don't use that feature.
Did you clean install 10.5, or upgrade in place?
If you upgraded, check your software for updates. Some software, more than likely, share/freeware, may be unhappy with 10.5, and causing speed issues.
I've seen this on a couple of machines.
Parts of the old Norton AV package will also cause speed (or crash) issues (filesaver, for example), and may not have been removed by the Symantec AV installer.

I need help!!! Did my iOS 6 update today, thought it was fine!! Then my friend text me and instead of saying Siobhain it says voicemail text message!! I've tried deleting her and adding her again, turning phone off etc etc!! Please help!!

I need help!!! Did my iOS 6 update today, thought it was fine!! Then my friend text me and instead of saying Siobhain it says voicemail text message!! I've tried deleting her and adding her again, turning phone off etc etc!! Please help!!

I know of no way to remove encryption on iTunes backups if you've forgotton the password. If you've used the 4 digit PIN code to lock your iPhone in the past that can sometimes default as your "password" for this encryption in iTunes. Try that PIN or any PIN you've used in the past. If you don't use a lock maybe you played around with that feature once when you first got your phone....try "1,2,3,4" or anything you could have possibly tried.
As far as accessing older unencrypted backups you can try this software. I do not have any experience using it but it seems like it's what you need and is probably the easiest route for both voicemail and texts:
http://deciphertools.com/products.html
If you want to try to find voicemails using Terminal, I found this link as well:
http://mikereys.wordpress.com/2011/10/18/iphone-backup-restoring-visual-voice-ma il/
I know with AT&T, voicemails are only stored on their servers for 30 days so any voicemail older than that you would not have been able to access again.
Best of luck.

Exchange 2010 disconnect AD user from mailbox and reconnect the mailbox to a new copy of the same user with a different username

How can i get the following done:
Exchange 2010 disconnect AD user from mailbox and reconnect the mailbox to a new copy of the same user with a different username?
i nmust do this for 16 users TODAY, SO PLEASE HELP ME OUT HERE.
Thanks in advance!!
kind regards,
Rene Veldman
System Administrator Teidem bv, The Netherlands.

Rene,
Why are you not changing the username of the existing account, instead of deleting the existing one and creating a new one?
If you truly need to delete and create new, you can save the GUID for the mailbox (Get-MailboxStatistics <mailbox alias> | Fl MailboxGuid), mail disable the existing account (Disable-Mailbox <mailbox alias>
will work), clean the mailbox database it was hosted on (Clean-MailboxDatabase
<database name>), then create your new account and recover the existing mailbox to that new account (Connect-Mailbox -Identity <Guid from before> -Database <Database name> -User <SAM account name of new account> -Alias
<what you wish to set the alias to>). In PowerShell, for all steps, you would do the following:
$MbxAlias = <mailbox alias>
$NewMbxAcct = <SAM Account Name for new account>
$NewMbxAlias = <new alias for mailbox>
$DomCtrl = (dir env:\LOGONSERVER).Value.Substring(2)
$MbxGuid = (Get-MailboxStatistics $MbxAlias -DomainController $DomCtrl).MailboxGuid
$MbxDb = (Get-Mailbox $MbxAlias -DomainController $DomCtrl).Database
Disable-Mailbox $MbxAlias
Clean-MailboxDatabase $MbxDb
Connect-Mailbox -Identity $MbxGuid -Database $MbxDb -User $NewMbxAcct -Alias $NewMbxAlias -DomainController $DomCtrl
You will need to supply the information in bold in the above commands, and you will need to create the new account before you run the above commands. I include direct use of a specific domain controller so you won't need to worry about replication.
If you are changing the account from one domain to another, this will not help, and you will need to wait for replication throughout the process, running the commands individually.

ISA 2006 publish Exchange 2010 Outlook Anywhere with Kerberos Constrained Delegation

Hi,
I have two Exchange 2010 Sp1 CAS with Windows Network Loadbalancing. I set up an alternate Serviceaccount and mapped the http,ExchangeMDB,PRF and ExchangeAB SPNs.
Then i published the Exchange Services via ISA 2006. OWA is working using Internet -> via NTLM -> ISA(webmail.domain.com) -> via KCD -> CAS-Array(ex2010.domain.com)
I tried the same with Outlook Anywhere (RPC over HTTP) without success.
Authentication to the ISA via NTLM works fine, but i think the isa server cannot delegate the Credentials successfully to the CAS-Server.
The ISA Log looks like:
Allowed Connection ISA 24.11.2011 15:50:40
Log type: Web Proxy (Reverse)
Status: 403 Forbidden
Rule: Exchange 2010 RPC
Source: Internal (172.16.251.33)
Destination: (172.18.10.182:443)
Request: RPC_OUT_DATA
http://webmail.domain.com/rpc/rpcproxy.dll?ex2010.domain.com:6001
Filter information: Req ID: 108b89d8; Compression: client=No, server=No, compress rate=0% decompress rate=0%
Protocol: https
So i always get a 403 Forbidden from the CAS.
I the IIS logfile from the cas server i see this entry:
2011-11-24 15:51:37 172.18.10.182 RPC_OUT_DATA /rpc/rpcproxy.dll ex2010.domain.com:6001 443 - <ISA IP> MSRPC 401 1 2148074254 203
I use the same Listener for OWA and Outlook Anywhere. Authentication Methods are Basic and Integrated. I forward the request to a webfarm which exists of the two physical CAS. Internal Site Name is set to the NLB name ex2010.domain.com, SPN is set to http/ex2010.domain.com
Thanks for your support

Hi, i ran into the same Problem.
the steps above solved mine too (Creating a custom AppPool which runs under LocalSystem).
I wonder why they included only the Script: convertoabtovdir.ps1
http://social.technet.microsoft.com/Forums/en-US/Forefrontedgegeneral/thread/dc24ccd3-378a-47cc-bbbf-48236f8fe5b0
Ist this a supported configuration (changing AppPool of RPC)?

Exchange 2010 co-existence with Exchange 2007 issue NDR size Four Times then we send

Hi All,
I am facing some strange issues of NDR size four times then we send like if I send 1 MB message to internal OR external recipient then we receive 4 MB NDR.
Even we send one black mail with subject Test mail of 4 kb then we receive 16 kb NDR is it due to architecture change or something else.
Everything was fine with Exchange 2007 but facing this issues after we change the mail flow to Ex2010.
Any help really appreciated
Regards
Anand S
Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

Hi Anand,
From your description, the NDR size is four times than original message size. I would like to verify the following thing for troubleshooting:
How many people has this issue, only one or all the people?
If only one user has this issue, I recommend you move the user's mailbox to another mailbox database and check the result.
If all the people have this issue, please enable Pipeline tracing and see if there is any hint. If the issue persists, please install the latest Service Pack and Rollup and check the result.
Here is an article for your reference.
Enable Pipeline Tracing
http://technet.microsoft.com/en-us/library/bb125018(v=exchg.141).aspx
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Just upgraded to Lion, can't open any pdf file downloaded from internet that was fine with Leopard. How can I overcome this obstacle ?

Just upgraded to Lion, can't open any pdf file downloaded from the internet that was fine with Leopard before. I just got a black screen when I clicked on a pdf icon on a given internet site, and same happened with several sites that I visited. How can I overcome this obstacle ?

Try two things with Safari not running:
1) Launch Adobe Reader, open its preferences, select the Internet category, and check the values under "Display PDF in browser using". If it's checked, try unchecking it.
2) Look in /Library/Internet Plug-Ins (at the top-level of your boot volume) for something names AdobePDFViewer.plugin. If you see such a file, try moving it to a folder named "Disabled Plug-Ins" (if such a folder exists) or onto the Desktop.
Then see how things work.

Exchange 2010 - Report NDRs with powershell

Hi all,
I would like to analyze all internal NDRs within my exchange environment. For example we have systems which are hard coded with email addresses of internal recipients and people leave the business and their mailbox and associated email address will be removed
from exchange but not from a third party system that has a list of addresses to send notifications out to or home grown scripts. In order to keep the email pipeline clean and follow best practices I would like to catch these NDRs and remove them from the relevant
systems.
Is there anyway I can do this with powershell, my environment Exchange 2010 SP2 and all the roles are on a single server.

Hi Niko,
I have just performed the following test:
sent an email to an internal recipient were the address does not exist, example
[email protected]
The NDR does not come from [email protected]
The headers for the NDR I got as listed below:
MIME-Version: 1.0
From: Microsoft Outlook
<[email protected]>
To: <[email protected]>
Date: Thu, 11 Dec 2014 08:55:54 +0000
Content-Type: multipart/report; report-type=delivery-status;
boundary="129b7383-6632-4979-ab4a-e5742a33ae6b"
X-MS-Exchange-Organization-SCL: -1
Content-Language: en-GB
Message-ID: <[email protected]>
In-Reply-To: <[email protected]com>
References: <[email protected]com>
Thread-Topic: test
Thread-Index: AdAVIEZfXlpAxeICRk2Dg71q+Amr/wAAADyf
Subject: Undeliverable: test
X-MS-Exchange-Organization-AuthSource: exchangeserver.mydomain.com
X-MS-Exchange-Organization-AuthAs: Internal
X-MS-Exchange-Organization-AuthMechanism: 05

Since upgrading to Yosemite my macbook pro keeps going to sleep if I am not using it. I want it to stay on as I leave it doing things overnight etc. It was fine before the upgrade and I have all the system preference set to "never turn off"

Since upgrading to Yosemite my macbook pro keeps going to sleep if I am not using it. I want it to stay on as I leave it doing things overnight (cd's / recording etc. It was fine before the upgrade and I have all the system preference set to "never turn off" - Help !!!

Good advice from Linc Davis that should sort out your query i think...
However you dont want to set your MBP to never go to sleep...
Adjust reasonable sleep settings...
And the download an APP called caffiene...
When you click it you can have your MBP never go to sleep with a single click of your menu bar... and with another click it can go to sleep normally to maintain the laptop...
Simply click the cup... To toggle never sleep/sleep

On a certain website, it says to click here to download plugin (Java). When executing the download, it says 'the installer cannot proceed with the current Internet Connection settings. I'm running 4.01. It was fine before the upgrade.

On a certain website, it says to click here to download plugin Java Runtime Environment. I receive the message installer cannot proceed with the current Internet Connection settings. It was fine before the upgrade to 4.01. I have another PC that has IE on it and it works fine and again it worked fine until the upgrade to 4.01. I've done the off-line download but in Firefox it still says I need the plugin and still results in the installer cannot proceed with the current Internet Connection settings.

You can install Java from here: http://www.java.com/en/ 
You also need to update your Flash installation since the one you have at the moment exposes your system to attack. It's a similar story for Adobe Reader.
See: 
* http://www.adobe.com/support/security/bulletins/apsb11-12.html 
* http://www.adobe.com/support/security/bulletins/apsb11-08.html 
Download from here: 
* Adobe Flash: http://get.adobe.com/flashplayer/ 
* Adobe Shockwave For Director: http://get.adobe.com/shockwave/ 
* Adobe Reader: http://get.adobe.com/reader/?promoid=BUIGO

Upgrade ip5 to ios6.0.2 and now I can't connect to the network (was fine with 6.0.1).

I just upgraded my ip5 to ios6.0.2 and now I can't connect to the network (was fine with 6.0.1). I bought the phone online in Canada but have a Hong Kong simcard. Any solution to connect to network?

I bought mine in the US and activated using a German SIM. It worked fine first on 6.0.1. After upgrading to 6.0.2 the SIM does not work. I have reset the reset the phone and still does not work. I loaded a new SIM and the phone worked for few minutes before going to Searching mode after I restarted the device. I am being told by the Genius Bar team that this is a Hardware failure.

Infragistics UltraWebListbar was working fine with the earlier version of the firfox. But it crashes after updating to version 12.

I am using infragistics UltraWebListbar to display list of menu in one of my page.
It was working fine with the earlier version of the firfox. But it crashes after updating to version 12.
Following are the few details from the stack trace
System.Convert.ToInt32(String value) +63
Infragistics.WebUI.UltraWebListbar.UltraWebListbar.getRenderer() +237

It's a third-party application, ask Infragistics support board. Maybe they have a fix or a dev version to fix your issue.

ISA 2006 publish Exchange 2010 Outlook Anywhere with KCD/NTLM and IPSEC - Problem

Hi
I have setup ISA 2006 to publish Exchange 2010 Outlook Anywhere with Kerberos Constrained Delegation and IPSEC.
The clients have an IPSEC policy pushed to them via GPO. The clients are windows 7 laptops and the ISA server is server 2003, so the IPSEC connection is IKE not AuthIP.
However, it seems that the connection will work for a while, then all of a sudden stop working with zero trace of why. I cant get the Oakley log to work and I cant see any traffic on the ISA.
I am wondering if I need to publish the CRL's externally? Currently we don't, and the Outlook Anywhere uses private certificates (as the whole point of IPSEC is to validate the internal certificate, there is no point in using
public certificates).
I have tried using the StrongCRLCheck=0 registry key in the IPsec Policy Agent on the windows 7 machine but it doesn't seem to make a difference.
Any advice would be appreciated.
Steven

Hi,
Firstly, have you received any related error messages in ISA server or on the clients' side? Besides, as you mentioned IPsec, did you have a VPN connection?
In addition,
While ISA 2006 only includes a Client Access Web Publishing Wizard for both Exchange 2003 and Exchange 2007. Which Exchange version you have chosen when publishing Exchange 2010?
Please also make sure that you have selected the
External interface for the web listener to listen on.
Besides, the link below would be helpful to you:
OWA publishing using Kerberos Constrained Delegation
method for authentication delegation
Best regards,
Susie

TS1277 Everything was fine with my iTunes library until i decided to update to the latest version of iTunes and now I'm getting to arror message "an application has made an attempt to load the c runtime library"

Everything was fine with my iTunes library until i decided to update to the latest version of iTunes and now I'm getting to arror message "an application has made an attempt to load the c runtime library" what do I need to do to resolve this problem? I already tried to redownload it a couple of times

Hello, see if this helps...
https://discussions.apple.com/thread/5864236?tstart=0
Are you running Windows?
https://discussions.apple.com/message/16458988#16458988

IOS 4.3.1 + Exchange 2010 "was" fine with the mailbox on Ex2007 server

Similar Messages

Maybe you are looking for