IOS 4.3 update for at&t only?

i'm hearing from the big apple event today that the iOS 4.3 update is only going to be for the gsm iphone (at&t). so what does this mean for cdma iphone? different OS updates at different times? maybe launching new iphones on different schedules? anyone know anything about this?

Tidbits wrote:
I still say the next version for Verizon will not happen until next year. Just because there is a delay on Verizon update doesn't mean a new phone is coming out anytime soon. One could say why not delay 4.3 and call it 5.0 and release it when the next iPhone comes out. That's basically what you are implying when it comes to Verizon. Also Apple isn't dumb enough to BUILD and distribute for 3 months just to scrap most of them in place of a new device in June. They would have NEVER released the 4 if the 5 was just a few months away. That would be wasted resources.
I agree...it won't likely come out for VZ this year. IF one comes out it will likely be for AT&T...or the version rumored to be a "cheaper" version maybe. Either way...all I notice with iOS updates is that it usually signals something new on the horizon...it very well could just be the iPad 2 that has sparked it. Or, Apple could shock everyone that assumes they will follow the usual pattern...and not release anything else this year except maybe updated iPod lines in the Fall. We will all see when ever Apple let's us. The rest is just stressing over rumors.

Similar Messages

  • We need new Update for Xperia 2011 only

    Hi Johan,
    we need new Update for Xperia 2011 only,
    in This Update We need Only 3 times :
    1- Battery Precentage
    2- Change Network ( 3G - E - H ) Icon
    3- Messid Call in Lock Screen ( Swip to se the message )
    Because  Today i'm see the ICS in Xperia P and there is the battery precentage ,
    and the network icon for ICS not nice and very small
    and the mesed call in Xperia S in the lock screen  ( Swip to se the message ) at's very nice
    Yoc Can send me the ditales in my Gmail : [email protected]
    ok , dont forget
    Bettery precentage : in the Xperia P ( 4.0.4 ICS )
    Lock Screen : Xperia S ( 2.3.7 GB And 4.0.4 ICS )

    Thank you for your feedback. It will be forwarded.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • HT5192 What is the easiest and fastest way for me to get the iOS 5.1 update for my ipad2?

    What is the easiest and fastest way for me to get the iOS 5.1 update for my ipad2? I am non tech savvy and am a new user to apple devices.

    If you are already running iOS 5 on your iPad go to Setrings>General>aoftware Update and you can update over the air via WiFi. If you are not running iOS 5 you have to connect the iPad to your computer and update via iTunes.
    Instructions here.
    http://support.apple.com/kb/HT4623

  • HT201077 As of recently any photos I add to a shared photostream will not update for others. Only I can see them. How come others sharing this photo stream are not getting the new photos?

    As of recently any photos I add to a shared photostream will not update for others and I don't see the updated photos on my other devices. Only I can see them from the device that i've posted from. How come others sharing this photostream are no longer getting the new photos? My iphone (the device i'm adding from) shows 20 pictures in this shared photostream and yet 4 other people that I share this photostream album with and my ipad only show 12 photos. For the past week I keep adding photos thinking people will see them but it just won't update the new ones. Any ideas how to fix this?

    You can stop new photos being automatically added to Photostream in iPhoto from iPhoto preferences > Photostream.

  • Itunes wont detect IOS 5 software update for ipad 2

    Hey all,
    I am trying to update my ipad to the new IOS 5 software update. However - after i have synced my update and click 'check for update' it states 'This version of the iPad software (4.3.5) is the current version.'
    It seems that my itunes does not recognise the new update on the server.
    Ipad 2 - 16 gb
    mac book air - all to date running on latest operating system

    Now downloading it. SHame i wasn't more patient LOL. Although it is rather slow now. Getting around 200 /300Kbps but i can live with that. Thanks JYJr, PogoPossum

  • Ios 5.1 update for iphone

    Yet another issue with ios 5.1 update!! My iMessage in now not working!! Arrgh.
    I got it going temporarily yesterday but lost it again this morning.
    I am in a wireless zone and I have re-booted the phone and gone into settings and switched imessage on and off again?? Is anyone else experiencing this?

    Have waited a while and it worked again. I think it maybe the wireless connection here. however it happened at home too. Will leave resetting it from new as a last resort. I'll leave it a couple of days and see if it continues then  if it still doesn't work, I'll do the complete reset. Thanks for your help.
    Regards

  • HT201263 ios 5.0 update for ipad 2

    Ios 54.0 update ipad 2

    See the chart below to determine whether you can upgrade your device and what you can upgrade to.
    IPhone, iPod Touch, and iPad iOS Compatibility Chart
         Device                                       iOS Verson
    iPhone 1                                      iOS 3.1.3
    iPhone 3G                                   iOS 4.2.1
    iPhone 3GS                                 iOS 6.1.x
    iPhone 4                                      iOS 6.1.x
    iPhone 4S                                    iOS 6.1.x
    iPhone 5                                      iOS 6.1.x
    iPod Touch 1                               iOS 3.1.3
    iPod Touch 2                               iOS 4.2.1
    iPod Touch 3                               iOS 5.1.1
    iPod Touch 4                               iOS 6.1.x
    iPod Touch 5                               iOS 6.1.x
    iPad 1                                          iOS 5.1.1
    iPad 2                                          iOS 6.1.x
    iPad 3                                          iOS 6.1.x
    iPad 4                                          iOS 6.1.x
    iPad Mini                                     iOS 6.1.x
    =====================================
    Select the method most appropriate for your situation.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • Data not updating for raw materials only in cube level

    HI all gurus,
    we have flow like ods1->ods2->cube1,cube2 and cube3.
    In ods1 we mapped ZMATERIAL WITH OMATERIAL.
    In ods2 we mapped zmaterial with zmaterial directly.
    In cube we mapped zmaterial with zmaterial only but also we added 0mat_type in update rules of cube. i.e.we mapped in update rules  0mat_type is master data attribute of zmaterial.
    But the problem is ods2 is mapped to cube1,cub2 and cube3 parllelly.
    But the data is not populating to cube2 and cube3 only for rawmaterials i.e 0mat_type is having 15 material types(finished ,semi finishe and rawmaterials) only 4 raw materials are not showing any data for these two cubes but for one cube1 it is showing data for all 15 material types. (including raw materials)
    what could be the problem.
    I checked the Attribute change run.
    I checked the data in masterdata also zmaterial and 0material.(data is available upto date).
    Please help and i will definitely assingn the points.
    It's very urgent becauz total my development work is stopped.
    Thanks & regards,
    Kumar.

    Hi,
    Check the material values in cube2 and cube 3 for records not having 0mat_type and then using that material check the material master data table to confirm whether mat_type is present for those materials or not.
    Also, if you have written any start routine in update rules for cube 2 and 3 then check that too.
    PB

  • HT4962 how do i download iOS 5 Software Update for my iPod touch please

    need to get my ipod running

    To update:
    iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
    A 1G iPod can go to iOS 3.1.3
    A 2G to 4.2.1
    A 3G to 5.1.1
    A 4G to 6
    Identifying iPod models

  • IOS 5.0 update for iPod touch: restore from backup?

    I downloaded the iOS 5.0 for iPod touch and everything got backed up beforehand. Apparently my backups are encrypted and a password is needed to use a backup and restore everything back. I don't know what that password is! Can anyone help?

    If you don't know the password, you'll have to set it up "as new device" and start all over again without using the backup. If you did not encrypt your backup and this somehow happened after the update, try to put in one of the password you use on your device, for example the screen lock password or your iTunes account code.
    There have been cases in the forum, where users were able to unlock the backup by trying this method, after their backup got encrypted during the update process for an unknown reason.
    How to set up your iPhone or iPod touch as a new device
    Message was edited by: Ingo2711

  • HT4623 IOS 5.1 update for I Phone 4

    I do not see "Software update" under settings.  I am trying to update with IOS5.1.

    You can't. 1. iOS on your iPhone appears to be pre iOS 5 when this button wasn't there..
    2. Moreover,
    jdb1106 wrote:
    ..  I am trying to update with IOS5.1.
    as recommended by Templeton Peck, iPhone will update to the Current one iOS 6.1.3.

  • IOS 8.2 update for iPad Air

    I Installed the 8.2 update on my iPad Air this morning and now none of my apps will open.  When I touch an app to open it, it asks for my iTunes store password and then when I enter the password, says it can't connect to the iTunes store and won't open the app.  Frustrating!  Anyone else having this problem?

    There is a problem with the store right now. It's not you. Give it some time to sort itself out before you go and do any hard core troubleshooting.

  • Since updating my phone to the new iOS 7 latest update my rear camera only shows a black screen and my touch no longer works?

    does anyone know how to fix this? I've tried the restarting my phone and closing down the camera app but it still doesn't work

    Hi MLucas22,
    Thanks for using Apple Support Communities.  I would recommend this article for troubleshooting your touchscreen:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    For the camera issues, this article may help:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    Cheers,
    - Ari

  • HT1222 why is the latest update for  iphone 4 only wi-fi downloadable

    I think that my phone has been comprimised so I need a direct download. When I went to update on my phone it states that i need a wi-fi connection. True?

    See: http://support.apple.com/kb/TI2

  • Did the ios 8.3 update now i can tview photos from the camera app and the photos wont save to my photos app.

    I just did the  new ios 8.3 update for my iPhone. I've been trying to take pictures from the camera app and it wont allow me to click on the picture to view it  and none of the new photos are saving to my photos app or if you send a picture through text it doesn't save the original to the photo app either. is this a problem with the new version of ios or have a maybe selected something to not allow me to add more photos? I only have 400 photos saved on my phone so its not a fact of not having enough space. any help would be greatly appreciated

    Hello Mark Entel,
    I have the same problem with my Hyundai Sonata 2011.
    I am already wrote a bug report to apple. Here i will past it again:
    Hello,
    I have a problem with synchronization.
    Here steps to reproduce it:
    1. Plug iPhone with iOS 8.3 via Original Cable ( USB + 3.5mm on 30 pin) + original adapter from 30 pin to lighting.
    2. Verify that music plays and iPod menu successfully loaded.
    3. Unplug cable from iPhone.
    4. Plug it again.
    expected result:
    - Ipod menu Loaded. The song plays from place where it was stopped by unplugged.
    actual result:
    - initialization error
    My Device: Iphone 5s
    IOS: 8.3
    Car: Hyundai Sonata 2011 (YF ; 6 generation)
    On all previous IOS it was worked fine.
    Fix for this issue:
    - Reboot phone and plug it again. But after unplug and plug it again the issue still reproducible. Only reboot can helps.
    Please try to fix it.
    Kind Regards, Vladislav Ishkov

Maybe you are looking for

  • Not getting all objects with Universe connection

    I am using CR 2008 SP2 and I am trying to create my first report using a Universe as the connection.  I click on Blank Report and it opens the Database Expert.  I then open Universes under Create New Connection and the Universe that I want to connect

  • Rebate Aggrements - Settling two rebates aggrement

    Dear Sap Gurus ! Following is my problem : 1. Created a rebate aggrrement ,10 with conditions records based on a particular customer X and mat Y . 2. Created a sale cycle and the above rebate aggrement is accounted . All is fine till here . I see tha

  • Problems faced while using MicrosoftOfficeInterop

    We are developing a windows program solution in which we programmatically access the Excel functionality and control the behaviour of the *.xlsx files.  We are using  Visual Studio 2012 Professsional,  Language C#   Namespace Microsoft.Office.Interop

  • Not communicating with scanning device

    I am running windows xp home edition sp2 with an hp office jet 5600xi all in one printer. Just switched to google chrome and I get the" no communication with the device error message" when trying to scan but can still print and copy.  tried all the s

  • Installing Netgear Adapter

    Trying to confirm this, if my PB G4 recognizes a PCMCIA network card, then the device will show up in the Network Device list in System Preferences? I have plugged a card in, installed the software for it, and in Network the only things I see are the