IOS 4 glitch with folder.

iPhone 3GS folder glitch, folder are shown empty.
Unable to post pictures.
Reply if you know.

Just posted this one....
I had a Mercedes Benz iPod connector installed (by Benz agent) in my 2008 E280. My iPhone4 (initially ios 4.3.2) would play through the system faintly, with the display on the speedo console is "AUX No iPod". I upgraded the iPhone to ios 4.3.5 and now to ios 5, in both cases the same problem is seen, although the sound coming through the car system is now better (as loud as if it were CD / Radio). I also noticed that whent he iPhone is plugged in the message "Charging is not supported with this accessory" is displayed on the iPhone. The MB agent tried another iPod - all works fine. I tried my daughter's iPhone 4 (with ios 4.3.2) - sound is good and no "Charging not supported...." message AND the display on the speedo console is "iPod <track title>". Seems definitely like a proble with my phone, not the car kit. Any similar incidents and any suggestions>

Similar Messages

Glitches with iOS 5?

I think I found a few glitches with iOS 5. I tried to remove one of my created ringtones by deleting it from the ringtones folder in iTunes, syncing then adding it back to iTunes and sync, but it won't go away (now I have two copies). Also, iPhoto isn't syncing my entire library - just have the past year (no option to change this. I had all of my library on my iPod prior to the update to 5, so it's not a problem with my phone.).
Otherwise, happy with my new iPhone 4S and the iOS.

I have tried resetting it, and restoring it but nothing seems to be working!!!

Since upgrading to iOS 6, I cannot save or transfer photos to iPad or iPhone. Is it a glitch with the upgrade?

Since upgrading to iOS 6, I cannot save photos to my iPhone or iPad or transfer pictures taken. Is it a glitch with the upgrade?

Can you be a little more specific? Do you mean that when you take photos with your iPhone camera or iPad camera they are not showing up in the photo stream? Do you mean that you are trying to sync your photos to a computer and that they are not syncing? Just not sure what you are asking?
GB

TS1398 can i possibly download from iOS 6 back to iOS 5? there are so many glitch with this new iOS 6, iTunes does not automatically syncing with my iPad2. Messages keeps on logging out, I have to log in again and again, including Facebook it is also acti

I am very excited with this ios 6, but now am very regretful that why did i updated my ios because the new ios 6 did not live up to my expectations, Youtube was gone, iTunes cannot automatically sync with my iPad, iMessages is logging out automatically, even facebook is acting wierd. facetime connection is very poor there are so many glitches with this ios 6. And I know that it is impossible for me to turn back safely to ios 5.1.1 now. Are there any suggestions you can give me? I just want my iPad 2 back to its normal and efficient stage again. Thanks

I am sorry to tell you that Apple does not provide a downgrade path for iOS. There are unsupported methods for doing so, but we are forbidden to provide that information on these forums.

Whenever I have a pdf document open, and then switch to another tab to view another webpage, the scrolling function on the touchpad will not work. This seems to be a glitch with Mozilla, according to Dell. How do I fix this?

When I open a pdf document (like an E-version of a newspaper) in Mozilla and then switch to another tab to view another webpage, I am unable to use the scrolling function on the touchpad. I have to use the up and down arrows to get other pages to scroll. When I close that pdf document, everything works fine. I talked with customer support with Dell, and he said it was probably a glitch with Mozilla. So I tried to do the same thing on IE, and there was no problem scrolling with the touchpad while a pdf document was open on another tab. I would like to get a fix for this so I don't have to keep closing open pdf documents in order to scroll with the touchpad while on other tabs. Thank you

Hi elliezzz,
If you are having issues with your iPhone not being recognized by iTunes, you may find the following article helpful:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Regards,
- Brenden

Mac Mail Typing Glitch With Hyphen

Using:
Mac Book Pro (Retina, Mid 2012)
Processor 2.7 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
OS X Yosemite, Version 10.10
Mail Version 8.0
Typing words with a hyphen such as "I'll" or "We've" or any hyphen causes the cursor to move in reverse one letter so the text typed separates the letters following the letters following the hyphen.
This is an aggravating glitch with the new version.
Anyone else with this problem and are there any work arounds or repairs?
Thanks for any suggestions, David

Log out under the Apple in the Menu bar.
Log in with Shift key down. (This disables all login items)
If the problem goes away it's a conflict with one of your login items.
Still have issue? Restart in Safe Boot mode.
Safe boot
* shutdown
* start the Mac and *wait* for the startup chime to sound
* after the sound, press and hold down the shift key
* keep holding and *wait* until the grey  Apple logo appears
* now release the shift key and just wait (it could take a few minutes)
* eventually the login screen appears with the words SAFE BOOT
* continue to login to see if the problem goes away.
Validate your Fonts
How to use Font Book to validate fonts
1. Open Font Book in your Applications folder.
2. Select All Fonts.
3. Now click in the list of fonts and select all (Edit > Select All).
4. Under File in the Menu bar, select Validate Fonts.
5. Duplicate fonts will be marked with either the yellow badge or a black dot.
6. Select to remove or delete duplicates.*
7. Delete font caches
8. Restart your computer
* Step 6 – remove or delete duplicates is where the tricky part comes in. You can select to let Font Book disable or remove duplicates, but I’ve found that it removes the one you have not been using rather than selecting the best option. See Font Management in OS X, by Kurt Lang, for more info on fonts.
http://www.jklstudios.com/misc/osxfonts.html
See Kurt Lang's directions here to remove font caches
https://discussions.apple.com/message/26188553#26188553
Let me know if you still have issue and we can do further steps to resolve.

After updating to ios 7.1 with my iphone 4 my apps wont update it just loads then stop help please

after updating to ios 7.1 with my iphone 4 my apps wont update it just loads then stop help please

Reset your iPhone. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
If you continue to have issues, try downloading the apps to iTunes on your computer, then sync your iPhone using iTunes.

App-v 5.0 sp3 Publish application icons/ shourtcut missed on 2nd time logon on terminal server 2012 r2 with roaming profile with folder redirection

1. I updated app-v 5.0 sp3 environment on 2012 R2. Roaming profile users with folder redirection logon fine at first time applications icons available but at 2nd logon applicaitons icons are missed while packages are available. we are using existing
roaming profiles with folder redirection which are running in current environment through APP-V 4.6 2008 R2. Please suggest work around to resolve this issue.
2. TS Nodes of 2008 R2 with App-v 4.6 running fine on Microsoft 2012 private cloud but we are facing performance issue (stuck, slow logon, slow performance etc) when we are moving in new 2012 R2 private cloud. SAP, SCSM and other sevices are running
fine, please provide solution.
Thanks

1.) What are you doing with the App-V Icon path? e.g. %LOCALAPPDATA%\Microsoft\AppV\Client\Integration\<GUID>\Root\AppVClientUX.exe.0.ico ?
I guess you could workaround it with deploying the icons to a central location and then pointing to the icon out on a central share. Or put the icons in a machine location...I haven't had this issue but that's just off the top of my head.
2.) I have not used App-V 4.6 in an environment like yours BUT would pre-caching the applications be possible? Any chance you'll be moving those apps into App-V 5.0 soon?
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

Errors/Glitches with my brand new Equium A200 15I (incl video hardware)

Hi,
I just treated myself to a new laptop last Saturday and have thus only had it for about 3 and a half days so far but I noticed a few small things that I weren't sure were errors/faults or if they were just because its new, such as the fact that sometimes I type things with the keyboard and some of the letters don't appear on screen, which I think is probably more to do with me not typing or pressing heavily enough on the keys rather than anything else, its not happening so much now...the touch pad gets a bit sticky too and it thinks I want to scroll up and down when I want to move the cursor not scroll sometimes but I manage to get it to work, I think most laptops have glitches like this and presumably I could help fix it by calibrating the touch pad(?) I haven't had time to look into that yet though... there are a few other things though and most worryingly just this morning I got a video hardware error message, so now im a fair bit worried/suspicious that there may be a real fault with it and would like to know if this is the case, whether its something I can possibly fix (im no real expert especially with hardware but I can always try downloading and installing updates/fixes and that sort of thing if it'd fix problems).
The main thing which is worrying me most, is that this morning a message suddenly came up on screen, warning me that there had been a video hardware error, yesterday evening, which I clicked on a button I think to load more info. and I took this screen cap of it:-
http://img528.imageshack.us/img528/724/errorscreencapcw1.jpg
I thought it may help to show the actual full message rather than just trying and pasting the info., well ok to be honest I didn't notice it let you copy it to clipboard but oh well (oops lol).
I know there's a topic about a similar error but I didn't want to butt in on that discussion as I presume that should be for that persons error to be discussed, mine may be slightly different I don't know... I followed the instructions given in that discussion and checked the device manager and no hardware faults are showing up there, btw it says in the device manager, under display adapters, that its a Mobile Intel 945GM Express Chipset Family, im sure all the A200 15I laptops have the same card but I thought I'd just clarify that. Incase that wasn't the right thing to check I also checked under 'sound, video and game controllers' (as the error said it was a video hardware error) where it lists the only one as being 'Realtek High Definition Audio' and I checked the properties there, on both under properties it says that the device is working properly, with no signs of any faults...
The thing is, I had read online somewhere that there is some issue with the graphics or video cards. I'd read that they can be glitchy and sometimes break down after the one year. I'd also asked my dad about this and we checked that it was an Intel graphics card that came with this laptop, which it is, and we reckoned that Intel chips should be as reliable as any other brand really... so I didn't think that there should be a problem, though if there is I have until next September to get it fixed before the warranty expires!
What surprises or kind of worries me though, is that the error message was only presented to me this morning. It dates the error as having occured at 19:53pm... I was using it last night and infact I went to have a shower and I put the laptop screen down before I went to shower at around 7:35pm, I presumed that its ok to just close the lid and it would automatically go into hibernate mode or something similar(?) im wondering if that had something to do with it, as I 7:53pm would have been roughly when I came back and lifted the lid/screen up again to use the laptop again... I can only presume, given the time it quotes, thats what caused the fault?
It does give me the option to 'update driver software' and 'scan for hardware change' within the device manager, should I run both or either of those perhaps? is this a common glitch? should I be worried at all etc...
Any help is much appreciated, if more info. is needed then let me know and ill clarify what I can. Also in terms of whats installed, I have quite a few programs, for graphics I have an old version of Paint Shop Pro which I installed yesterday morning, it seemed to install fine, thats Paint Shop Pro 7 from Jasc, I also have some converter programs (for vid files, 3GP and stuff), AVG Virus scan, Spybot Search & Destory, DBPowerAmp, FTP Commander, Quicktime and Real Player, fairly basic stuff like that, nothing much else just my old pics and vid files I transferred from my old XP laptop to this one, in my documents... I don't have any high powered or complicated games or anything else like that installed. Also at the time the video hardware error message states, all that was running when I had the lid down (or before I put the lid down) would have been Windows Live Messenger (though im pretty sure I signed out before putting the lid down) and an IE window, im pretty sure thats all, I wasn't working on anything else just checking the 'net...
There are some other things I've noticed too that I thought perhaps I should mention(?), one thing I've noticed it doing is the screen going blank and then coming back very quickly, alot. I've already asked about this a day or so ago as by then I realised that it was only doing that before loading the 'Windows needs your permission to continue' window/message, which apparently its supposed to do and is something to do with the computer switching from displaying the normal desktop to the secure desktop, which I sort of understand lol.
So I believe that isn't anything to worry about but I have noticed over the lastday or so, that the screen seems to do this more, going blank then coming back again, even when that permission message doesn't show up.
For instance this morning when I first put it on and went to check my home page, I clicked on a link at the bottom of the page or wherever to load another page within the website and the screen went blank for a moment before coming back a second later with the requested page. Is this normal too? or a Vista related glitch, or is there a possibility there may be a glitch with the monitor? im guessing it may be more of a Vista thing but I thought I'd ask here just incase, I decided not to pay for any extra insurance/extended warranty as I'm very careful with my items and take good care of them and so I'm being careful to try and spot any faults early on while they may be fixable under the basic warranty and what-not...
Another thing I've noticed is that to start with, when I pressed and held the 'FN' button, a range of black and white icons appeared on screen which told me which F button(s) to use to make certain adjustments, it still does that when I try it now but at other times, it doesn't show the icons, no matter how long I hold the 'FN' button down. That doesn't really matter since I can tell from the symbols on the keys on the keyboard which buttons to press but its just inconsistent, is there a reason why sometimes the row of icons on screen will show up when I press and hold the 'FN' button and other times it won't show at all?
Also sometimes if I move the cursor right to the top of the screen, those icons load as they seem to always be located at the very top of the screen but sometimes this is a problem, if im trying to click on something else and one of those icons comes up instead... im sure you can switch this option off somehow but should I be worried that the icons don't always show when I press and hold the right button(?) just trying to be cautious!
I think this post is long enough and I can't think what else I could possibly add to help, so I'll leave this here. I don't mean to seem too paranoid but thought it best to mention this stuff incase anyone recognises these glitches/errors and can recommend a quick way to fix any problems before they may develop into anything worse... many thanks in advance for any help with any of these issues!!
(mods let me know if im wrong to include so many things in one topic, I kind of did this quickly and I apologise if im breaking any rules I don't mean to, if possible please break this into a few different topics or I can do this, though ill be at work frm 2-9pm today so might not be back and able to check here until Thursday morning (October 4th))

Hi Isla
Your message is really, very, very long. I think its too long to read it twice ;)
. Regarding all your issues on this notebook well. it looks like you have installed many 3rd party programs and applications. In such case its not easy to say if such issues are software or hardware related. But I presume its software.
I checked your screenshot pic but I have never seen such error message. But it looks like something wrong with the graphic card driver. The message says something about Live Kernel Event
A kernel's services are requested by other parts of the operating system like graphic card driver for example.
In such case I would recommend updating the graphic driver. According to you message its a Intel GPU. So you could check the Intel page for the compatible graphic chip driver.
Regarding the FN key issue;
The Toshiba FlashCard utility controls the FN key functionality. I have read in this forum that this application does not run smoothly and in some cases it causes some issues. The new update should solve the problems. You should check the Toshiba driver page. The FlashCard Utility is a part of the Toshiba Value added package.
So finally one more hint:
You should always check for the Vista updates on the Microsoft page. This OS is not perfected and Microsoft releases very often patches and fixes
Hope it could helps a little bit.
If necessary just ask for more info :)
Regards

Hi ,How can I get a list of all laptops or users with folder direction enabled or offline files enabled, be it sccm or poerwshell . i have struggled for a week.

Hi ,how can I get a list of all laptops or users with folder direction enabled or offline files enabled, be it sccm
or poerwshell . i have struggled for a week
tchocr

Hi,
There is no such PowerShell command can achiev this. Maybe you can use a script to get the user name with folder redirection enabled. However, I am not familiar with writing script, and it would be better for you to ask in script forum below for professional
assistance:
http://social.technet.microsoft.com/Forums/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How can I get a list of all laptops or users with folder direction enabled or offline files enabled, be it sccm or poerwshell . i have struggled for a week.

How can I get a list of all laptops or users with folder direction enabled or offline files enabled, be it sccm or poerwshell . i have struggled for a week.

Hi,
There is no such PowerShell command can achiev this. Maybe you can use a script to get the user name with folder redirection enabled. However, I am not familiar with writing script, and it would be better for you to ask in script forum below for professional
assistance:
http://social.technet.microsoft.com/Forums/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Just bought a dell pc with windows 8. on my old pc (vista) i would right click a movie (in itunes format) and say open with itunes and it would play. Now it won't open in itunes and it just CRASHES. HELP PLEASE. is there a glitch with win 8???

okay not sure how this works so here i go again.
Okay i bought a dell pc with windows 8 (big mistake) i downloaded itunes and from my external hard drive, right clicked a movie file (in ipad format, because this worked in vista on my old laptop) and it will not go into itunes. And itunes keeps crashing. Is there a glitch with win 8 and itunes ? I never had this prob with vista. I would right click a file and say open with itunes and poof it goes in the library. Please help before i throw this thing out the window! OH newest itunes is what i have installed.

Take a look at this MBP, a refurbished unit. Don't let the late 2011 release date put you off. For about $500 less than an equivalent 'new' one with similar specifications you get a quad core CPU and excellent graphics. As Steve359 mentioned, this can be upgraded if the need arises and has the same warranty as a 'new' one
I would not be surprised that these may actually be 'new' MBPs due to the length of time that they have been replaced by the current generation. I purchased a 17" model about 5 weeks ago, and a serial number check suggests that it is 9 weeks old.
http://store.apple.com/us/product/G0NM5LL/A
Ciao.

Possible little glitch with the Nano(second generation)

It may just be my iPod i'm not sure, but if I select a song by author then go to my songs directly it dosn't show that that song is playing with the "<))" icon. This leads to other smaller glitches with song selection. Again, this is only minor so it's nothing to freak out about. Just wanted to put it out there. Has anyone noticed this besides me??<br>
Nano(second generation) Windows XP Pro

Do you mean this by any chance?
See: Some songs don't don't show under artist on my iPod.

When I send a photo directly from iPhoto using the Mail app on my iMac, the wrong photo appears on my iPad2 Mail app. However the correct photo shows if I log into gmail on the iPad2. I assume there is a glitch with my "Mail" app on the iPad2.

When I send a photo directly from iPhoto using the Mail app on my iMac, the wrong photo appears on my iPad2 Mail app. However the correct photo shows if I log into gmail on the iPad2. I assume there is a glitch with my "Mail" app on the iPad2? Any suggestions for getting the correct photo to show on iPad2?

Update: I was able to have the correct photo show in my email as received on my iPad2 by changing a setting on my IMac prior to sending the photo on the email.
On the iMac, I went into iPhoto > Preferences > Email photos using > Mail (in lieu of "iPhoto"). This seems to have corrected the issue. I'm not sure why. Now the correct photo shows up when received on my iPad2.

How to make an app deleted from iTunes library be deleted from all the iOS devices synced with this library?

Hello!
I have 3 iOS devices synced with iTunes apps library (OS X 10.10.2)
Can someone tell me how to make not only added but deleted apps be synced also? I mean I want an app deleted in iTunes library be deleted from any iOS devices synced with this library.

But it was working some time before! What and when has changed?
There was even a warning popup window something about "this application will be deleted from all the devices synced with this library"
Now there's opposite message - "This application will not be deleted from any device syncing with this account". Isn't it some kind of clue that there can be conrarily circumstances - when application IS deleted from ANY device synced with this computer?

IOS 4 glitch with folder.

Similar Messages

Maybe you are looking for