IOS 4.x operational bug when listening to music?
I've been looking around the forums to see if I could find an exact match for this problem, but have only come up with near misses so far.
Ever since upgrading my 3rd gen iPod Touch to iOS 4, I began noticing the screen turning itself on at seemingly random times. After some trial and error, I believe I've hit upon instructions that can reproduce the problem on demand.
Open up a playlist. It doesn't matter if it's a smart playlist, manually created, on-the-go, etc.
Start playing a song.
Click the lock button to turn off the screen.
Double click the Home button in order to turn on the screen and bring up the track controls.
Skip to the next track.
Click on the Lock button to turn the screen off.
Let the current track finish playing, and allow the next track to start.
Approximately 10 seconds into that next track, the Lock screen will turn on by itself.
I've been able to reproduce this on my Touch with iOS 4.0 and 4.1. I've also reproduced it on an iPhone 4, running iOS 4.1.
Can anyone else confirm this behavior?
My 5800 does not ever vibrate, any condition, any usage...with or without head phone...not even when an incoming call or msg is there and vibration alert is on..it does not ever vibrate. I'll have it checked with Nokia care. Looks like either the vibration motor is not there or not working...or possibly a software bug.
This issue has persisted since the day I bought it - till today when I have updated to firmware version V21.0.025 (Custom version 21.0.025.C01.01)...so,no resolution with latest update either.
Message Edited by sha76 on 13-May-2009 01:03 PM
Similar Messages
-
when listening to music with my apple tv, I lose signal for a few seconds, then its okay and then I lose it again... any solutions ?
Hi there Iphone4fn,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
for some reason , when i restore my iphone 4s to factory settings my headphones work when listening to music or youtube videos but when i backup my information onto it , it only comes out of one ear bud and i just got a new one from the apple store. my old iphone 4s audio jack was messed up but i just got a new one with my warranty , can anyone help me please.
It doesn't matter what it is in your backup that's causing the problem because you can not selectively restore things from your backup. It's all or nothing.
Set you phone up as a new device and start over. -
When listening to music on ATV, it will play two songs from the playlist, then no more. You can see the playlist on songs, but it won't play. Turned everything off, reset the network...nothing works. Any ideas? It used to play fine...for hours at a time.
Hi. Thanks for your reply.
It is happening via "shuffle" in a playlist. Always two different songs within the playlist. You can see the next song on the screen that should, theoretically, be playing...but nothing happens. Even when you push "play" on the remote, it doesn't receive the command.
I reset, then restored ATV. Now, it doesn't limit itself to two songs, but does stop after a few. The more trial and error I do, the more I believe the problem is with Homesharing in iTunes. If I turn off Homeshare, then turn it back on, a couple more songs will play in the playlist. I have shut down iTunes, restarted computer, completed updates, but nothing seems to change it.
It used to play fine for hours on end, but has now found this glitch. -
Sometimes when listening to music or a podcast, it will stop and start in rapid fire. I have a 4th gen iPod Touch. A Genius suggested something went wrong during the transfer from my MBP to my iPod, but I tried resyncing it, and it seems to happen haphazardly. Even if a podcast plays oddly one time, it might play perfect the next - so it can't have been the sync that went bad.
- First try a reset. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next restore from backup
- The restore to factory defaults/new iPod -
Lumia 920 crash when listening to music
Hi,
My Nokia Lumia 920, windows 8 mobile keeps crashing when I listen to music from "Nokia Music". I usually use nokia-provided headsets when listening to music. In recent times the crash has become more frequent. When listening to music, the handset just reboots without any notification.
Is there a place I could look at the crash dump and submit it as an issue ?
OS Version: 8.0.10211.201
Firmware: 1232.5951.1249.1001
-Pranavhave you tried a soft reset? i'm not talking about what you think might or might not work, i'm talking about trying it. it doesn't wipe any data. if it still doesn't work, then you may need to perform a hard reset (Settings > About > Reset your phone), which will wipe everything, so please make a backup to PC and/or online storage of your data first.
failing that, you will need to take your phone to your Nokia Care for inspection: http://nokia.com/support -
Iphone 5s overheats when listening to music
my iphon 5s overheats when listening to music sometimes after only 2 or 3 songs.
i took it into the apple store they gave me a new phone after seeing there was 5 overheating notifications.
now it happened again on my new phone. i heard something about disabeling syncing between icloud and safari. will this work?Welcome to the discussions,
did you already try to reset the phone by holding the sleep and home button until the Apple logo comes up again? If still no change, a restore "as new iphone" would be the next step. In that case don't use your backup to get your data back, it may contain damaged files causing your problem.
Restoring: http://support.apple.com/kb/HT1414 -
When listening to music on my iPhone 4S, the music stops when the screen fades.
When listening to music on my iPhone 4S, the music stops when the screen fades. I am not using my earphones. Can someone suggest some ear buds that will work with my iPhone4S? The Apple ones do not fit...too small.
Hello Rick Kos,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Best of luck,
Mario -
Lately my ipad 3 has been sounding horrible when listening to music and videos its like static or cracking what's going on someone please help me I don't wanna make a trip to the apple store if other people are having the same problem !
I have the same problem with my new iPhone 4s in a new BMW 328i. My old iPhone 3GS, iPad touch and Zune have no problem with aux.
-
New IOS (7) causes glitch when listening to music over bluetooth
Ever since I updated to IOS 7 (I currently have 7.0.3) every time I listen to music (on my car bluetooth or a blueparrot headset) I get this weird skip in my music EVERYTIME I hit an IPhone button.
If I lock the phone (skips)
If I unlock the phone (skips)
hit the home button (skips)
going into a different music catagory (artist/album/genre) (skips)
using any of the installed apps (facebook/twitter/etc) (skips)
It sounds just like the old CD players that use to skip when there was a bump.....
I have restarted the phone
hard reset the phone (holding home/lock until it shutsdown)
reset network connections
rematched bluetooth connections
updated from 7.0.1 to 7.0.3
nothing works... (7.0.3 actually semms to have gotten WORSE)I've exactly the same problem... IOS is becoming a cancer for sync devices
-
I use my iPhone in the car. It has been a really useful feature to be able to fast forward and reverse buttons on the steering wheel when listening to an iBook. This no longer works with iO7 and I am really disappointed that I now have to revert to using the keys on the iPhone rather than the cars steering wheel. I also now get regular warnings that the cables I am using were not made for the iPhone. I bought them from Apple direct so what
Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50856.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I just updated my Note 3 to 4.4.2. Since then when I listen to music or make a call on my Bluetooth my music and calls 'studders' and has some type of 'drop-outs' during the music and calls. This was not the case prior to the update.
Yes, I have power down the phone. Yes, I have removed the battery and restarted the phone. My Bluetooth headset is an LG 730. I tried listening to music on my other Bluetooth devices and they also 'studders' and has drop-outs during calls and music. I connected with a wired headset and the 'studdering' disappeared.
Is there a way to revert back to the previous 4.3 version of Android. I use my phone extensively for business and drive with it. The law for my state requires 'hands free' usage of my phone.Unfortunately, I was forced to do a factory Reset. This wiped the device to a new state.
Afterwards all Blue-tooth, wi-fi and calls operated fine.
I would advise that you notify your customers that they would most likely have to do a Factory Reset once they update their device.
All contacts, pictures, data and applications were either lost or had to be reinstalled.
Laurence
(Removed)
Private info removed as required by the Verizon Wireless Terms of Service -
Problem with the speaker when listening to music
I've been having problem with my iphones speaker when im listening to music through it, like u would hear a bad sound and annoying noise, wat can i do to fix this problem?
Another thing to think of that might help.
If you hear an odd sound intermittently over speakers when the iphone is near, that could be GSM interference. GSM phones produce this interference when contacting the cell network. You don't have to be using the phone for this to happen. The phone is in constant contact with the cell network to check time, signal strength and a range of other things you might have turn on the phone.
one way you could test this is to put the iphone into airplane mode and play the music for a while.
Hope this helps. -
Headphones/earbuds and carrying options when listening to music?
How is everyone carrying their iPhone and listening to music? I see there is an earbuds option with a microphone but unlike the Nano there isn't a lanyard option. Are people putting it in their shirt pocket (what about you gals?) or clipping it on your belt?
With my Nano (and the touchwheel) carried around my neck lanyard I can easily change volume by touch which is very convenient. I assume with no such wheel I'll have to at least look at the iPhone so I'm trying to figure out the best strategy for carrying it while music playing and would like to know what others are doing.Hi,
Which phone model are you using? And when this happens, are you doing something special with the phone? Does the volume go up by itself again or do you need to press the volume up(+) button to increase it? Do you get any kind of message when you press the volume up(+) button after this behaviour?
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
Audio stutters when listening to music on U410
I have a U410 ultrabook (purchased in Nov. 2012) which has been working fine until a couple weeks ago. Almost any time I try to listen to music now (either online with internet radio or locally with mp3s), the sound will stutter and skip. This happens about once a minute.
I haven't installed any new software or changed drivers lately, but the computer does seem to be slowing down a bit compared to when it was brand new.
Has anyone else experienced this problem or have any ideas on fixes?
Solved!
Go to Solution.Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
Please try updating the following to verify the issue is fixed
Conexant Audio Driver - Win 7 Conexant Audio Driver - Win 8
BIOS Update
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español
Maybe you are looking for
-
I am trying to create a Form that will act as a list. I want to import data into the form from exce
My table has a list of names with product information in corresponding columns. I want to create a form that I can import this into where every row makes a new part of the form list I create. Is this possible? Example of what I have in excel: Name
-
Phone froze, then i tried to restart and is frozen with apple logo.
What do i do? The phone froze so i did a hard restart. held the wake/sleep button and home button, then i turned it back on and it doesnt go to anything else but with the load up apple screen. Has been like this for hours and its sitting on the charg
-
Disable editable field in ALV grid using OOPS
I have following requirements, Displaying ALV grid output with most of the fields editable. Validations on data entered for each fields,for error messages Query : I want to make all the fields except the field in ERROR in display only mode similar to
-
Can you paste ALL video attributes with one click?
When copying motion attributes from one clip to another, is there a way of selecting all the video attributes in one shot to paste to the next clip, instead of having to check each individual box in the paste attributes dialogue?
-
HT1924 How you can do it on iPad?
My iPad somehow switched to UK store, how I can turn it back to US?