Ios 5.0.1 dropping off wap enterprise network when phone goes to sleep

Same issue that is being discussed about dropping off WAP Enterprise when phone sleeps. Everytime I have to reconnect and I am ok. It will not remember the connection. I own the 4G and it worked fine all the time. However when updating to the 5.0.0 and 5.0.1 the problem exist. No problem with cisco linksys connection for home use.. Corporate use is an issue. Don't see how it worked fine before for multiple users and as soon as we updated to 4G s software the problem started. This is something in the phone connection and recommend a fix or multiple user will switch products !
I have restarted phone, reset phone entirely, reloaded phone, reset network settings and master reset...No luck. When will a fix be coming.

I did not realize that it had different behavior when plugged in, I just tested and that is the case. What I find interesting is that it used to stay on wifi all the time before I updated to 7.1. Also, from what I read when I first got my iphone, was wifi uses less power than mobile data/3G, so that does not make sense to me. If I have background app updating on it should use wifi when I am home, so it does not use up my data limit. Finally, I have an app from the cable company that gives me caller ID when the home phone rings, and it does not work anymore because the phone reverting to 3G.

Similar Messages

Need help - wifi gets disconnected when it goes to sleep mode - iOS 6, iPhone 5, WPA Enterprise

Hi, I have read a lot of discussions regarding wifi gets disconnected when it goes to sleep mode on iOS 6, mainly on iPhone 5.
Here is my configuration and it just keeps disconnecting wifi connection once it goes to sleep mode
iOS 6
iPhone 5 white
Purchased on Nov 3
Work wifi config: WPA Enterprise
I tried to manual add the wifi but it did not work. I tried all except for upgrade to iOS 6.0.1. I had a call to Apple Support and the guy told me I could not trust everything i read from here (well, how dare he is!!!). But I did all I could think of, and read from here.
I am with ATT and I do not have a receiption at all at work. I have to turn it to airplane mode, and use the wifi connection. I put my iPhone 4 with iOS 5.0 side-by-side to compare. My iPhone with iOS 5.0 DOES NOT disconnect the wifi connection when it goes to sleep mode; but of course, we all know, iPhone 5 with iOS 6.0 does
Any helps would be so much appreaticated. I am considering to return the phone to apple store, and cancel my 2 yrs extended contract with ATT. I might think to get another one once they have the issue fixed. It is no point to have an expensive paper-weight at work while I can't use the celluare nor wifi connection.
Thanks again,

Hi ChrisJ4203
I have tested it at home wifi tonight. My phone and my wife's iphone (both iPhone 5 with iOS 6.0) do the same.
With cellular data on (aka airplane mode OFF) with WIFI ON
Wifi icon replaced by ATT's LTE icon once the phone was waken up from sleep mode; but within 2 secs, the wifi connection got reconnected again.
With cellular data OFF (aka airplane mode ON) with WIFI ON
WIFI icon disappeared from the top bar after both phones were waken up from sleep mode. It took a while to reconnect to the wifi network (more than 10 seconds).
On a separate note, after i rebooted my phone, i can see it does "searching" the ATT's signal, then it shows "No Service", then next second, it shows ATT with full bars and LTE icon.
My question is, i have never noticed the "No Service" showing up from my iPhone 4. The "No Service" shows up on my wife's phone too. When I first got her phone and was doing the installation, I had noticed the cell signal dropped from full bars to no service, then within few seconds, it went back up. I have not had time to test on her phone again, but it is something I will be monitoring for. I wonder if anyone has similar experience like this.
anyhow, any feedback on how to fix the wifi got disconnected while in sleep mode would be very helpful.
thanks,

Airport drops my connection when it goes to sleep

My iMac always drops my connection to my network when it goes to sleep How do I fix this?

I have tried some minor fixes I saw recommended. Last tried was deleting 6 plist items from library. I have to wait and have it go to sleep to tell if it works.
I have 10.8.2 running on my imac. I have to go now but will check thus discussion upon my return. Thanks John

HP dropping connection when it goes to sleep.

I am running Windows 8 and my new HP Photosmart 7520 keep dropping the wireless conection when it goes to sleep. I see posts all over the net. Has anyone figured out the problem yet. I've tried scan doctor, no help.

Hi Swenn,
I would recommend following the document below - although you can skip the print and scan doctor until later, as you've just tried it.
Printer Does Not Maintain Wireless Connection
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

After recent update to airport on iMac, the wifi connection is lost when it goes to sleep and requires turning off wifi and turning it on to reestablish contact.

After recent update to OS on iMac, communication to airport is lost when computer goes to sleep. To reestablish connection, I need to turn wifi off then on.

same problem here.
i have a time capsule.
symptoms:
excessively searching for network
but more often than not, it cant find the correct netowrk that is correctly stored in keychain
if i try network assistant opened through safari not finding its page, then it can find the right network after i enter in the password again. it connects. but only for a few seconds then it loses the connection again.
the only fool proof workaround for me is:
1/ shut down time capsule. restart time capsule.
2/ restart mac with airport turned off.
3/ after restart manually select the network from the wireless icon in the menu bar
airport utility is a complete waste of time
old airport utility is still better.

Will it be better if I power off iphone 5 totally when I go to sleep at night?

will it be better if I power off iphone 5 totally when I go to sleep at night?

i mean, is it better _shut down or sleep mode for iphone 5 if i go to sleep.
Normally i shut down ipad2.
and i feel that i phone5 sometime feel heat not like ipad2 after used for a time. So wanna make sure.
Thks.

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it.It is 4 gen running on 4.3.3

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it to turn it on .It is 4 gen running on 4.3.3.Please help

so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

Apple TV 3 drops network connection when it goes to sleep

I updated my Apple TV 3 to software version 7.0 (based on iOS 8) and now every time it goes to sleep it shuts down the network connection. To wake it up, I either need to use the remote or use an iOS 8 device that supports handoff. At least I think it does since my iPhone 5s can wake it up, but my iPad 2 cannot. I believe the Apple TV is now using Bluetooth for connections. This basically means Airplay with older devices won't work without first waking the Apple TV. I'm not sure the point of the change since I'm using Ethernet, not Wifi, so there's no reason to "power down".
on a side note, sometimes the iPhone 5s can't wake the Apple TV either. It usually wakes up when I open the control panel, but not always. It goes back to sleep when I close the control panel.
Ia there any setting to make it work the way it used to?

Chenks wrote:
the WIFI does not drop when my appletv goes to sleep.
my iphone can still see the appletv (via the airplay icon) when it is asleep.
All you are seeing is the last known Wifi state in iTunes (and similar app in iPhone, iPod, iPad). The AppleTV however has powered down "something" in its own mechanism to conserve power.
For the Apple TV to use such low watts in operation, its got to be powering down something.
I have seen this behaviour before in other devices that try to power down Wifi in a sleep state. It is not connected but it thinks it is. I'm not an expert in Wifi technology so won't state what is happening behind the scenes but do know that re-starting/re-powering up the devices will cause the wifi connections to be re-established.
I would try this but don't have access to my ATV at the moment. Turn off encryption and see if the problem persists. My gut tells me that the WPA/WEP encryption has lost itself in the low power state.
I suspect that 10/100/Gig RJ45 ethernet connections are not affected.
Message was edited by: laugher. Added ethernet connections theory.

Phone turns off blue tooth connection after 30 seconds into the call (when screen goes to sleep)

Installed 2.2, paired my fascinate with my plantronics explore 240 headset, accessed voice dial (which worked), connected my call, after thirty (30) seconds the blue tooth connection dropped, picked up the phone and continued the conversation. Just turning on bluetooth and leaving the phone sit for 5+ minutes keeping the screen active the blue tooth does not turn off, let the screen go to sleep and the blue tooth turns off.
I can not maintain a blue tooth connection when the screen goes to sleep, not even during a call. Is there a setting I am missing to keep this from happening or ... An alternative?
Any help would be appreciated

Hi.
The Bluetooth should not disconnect when your screen goes to sleep. Have you tried re-pairing the Bluetooth since the upgrade? Below I have provided you with the steps to pair the Bluetooth again. (Please make sure both devices are fully charged when doing so.)
Step 1 - Enable Bluetooth functionality on the Samsung Fascinate.
Note: The Bluetooth power must be set to ON position to pair the handset with a Bluetooth headset.
From the main screen, tap Menu.
Tap Settings
Tap Wireless & Networks
Tap Bluetooth to turn on Bluetooth
Step 2 - Put your fully charged Bluetooth headset into pairing mode.
Start with your Bluetooth accessory powered off.
Press and hold the Call Control Button until the light indicator flashes blue and red.
Your Bluetooth accessory is now in pairing mode and ready to be paired with your handset.
Step 3 - Pair the Samsung Fascinate with a Bluetooth Accessory.
Note: The Bluetooth power must be set to ON position to pair the handset with a Bluetooth headset.
From the main screen, tap Menu
Tap Settings
Tap Wireless & Networks
Tap Bluetooth Settings
Place accessory in pairing mode, see accessory pairing instructions.
Tap Scan for Devices, device starts Searching.
Tap [Plantronics Bluetooth] to pair
Pairing Complete, touch home to exit.
If you still need assistance, please send me a Private Message and I will be happy to help you.
Thanks,

I have a Touchsmart 610-1280qd when it goes to sleep at night it powers off and has to be replugged

It goes to sleep at night the blue light on the side goes from blue to amber. In the morning the amber light is out, move the mouse, key on the keyboard, nothing. Push the power button, nothing.
Unplug the computer from the surge protector and plug it in the same spot, nothing. Plug it into another recepticle in the surge protector, it powers up.
I have plugged it straight into the wall, same symptoms, unplug it, plug it back in the wall, nothing. Plug it into the surge protector, it powers up.
This is very consistent, unplugging and plugging into the same recepticle will do nothing, plug it in elsewhere, up she comes.
Been a REALLY sweet computer except for this one flaw and it is bizzare. I have had this computer since February and this started about 2 months ago.
BTW, when I change the power plan to have the screen go to sleep but the processor stay on, it does stay on overnight which I suppose is not surprising. My power setting is balanced with the monitor going off in 10 minutes and the computer going to sleep in 20 minutes.
This question was solved.
View Solution.

kezzyg
After reading through your post a few times, then looking around the forums (HP's and others) I suspect that it could be a power brick issue. It sounds intermitent so perhaps this is one solution if you have not explored it already. Seems like others have had the same expereince and the fix was to replace the brick. I hope if you rediscover this post your issue is already resolved but if not, try that.
I am an HP employee.
Regards,
Cooper56
If you’ve found this information helpful, please make it easier for others who might be experiencing a similar type issue by marking my answer as “Accept as Solution” .
***Of course you can also Click on “Kudos” STAR to say thanks!***
I work for HP. When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

Bluetooth Audio dropping out when Phone goes into screen lock

I have a 3G running 3.0 and a Sony Bluetooth audio capable car stereo. The audio streams perfectly via bluetooth until the phone goes into screen lock or "sleep ", at which time the audio starts drooping out. As soon as you slide to unlock the screen everything works fine again.
Anyone else with this issue ?

Yup, that's exactly what I've had.
I paired a Jabra BT3030 BlueTooth stereo headset module to my 3G and it worked perfectly until the screen went off and then the audio could only be heard intermittently. When the screen came back on, audio was perfect again. This was completely repeatable.
I posted about this the other day, but just prior to that tried again to confirm and I could NOT get it to occur. No matter how many times I put the iPhone to sleep and woke it up, the audio played consistently with NO dropout which is somewhat frustrating and a bit bizarre.
Looks like there is an issue with A2DP if several of us are experiencing the same problem so bug report/feedback to Apple is required I think.
Has anyone else had the problem go away next time you try?

Wifi turns off when screen goes to sleep - how can i disable this?

running 10.8.4 on MBA 2013
is there a way to keep wifi alive when the screen goes to sleep (automatically turns off)?
this is very annoying that i would have some internet connected application running (eg. a download) and then the screen turns itself after a timer and also cuts the wifi. this means i have to keep my screen on if i had a big file to download. is there a way around this? i cannot find any settings addressing this issue/option.
thank you.

edit:
i know there's the option "prevent computer sleeping when screen is off" under power adpter, but i would like it done while running battery.
thank you.

MBP 13in drops wifi when computer goes to sleep, I have to restart the computer to reconnect. Help?

I recently did the Lion update on my MBP. Since then my computer will drop wifi connection everytime the computer goes to sleep. It will not let me log on network saying invailed password. I have to restart the computer and then it connects automatically. This is NOT a router problem. Skip any and all advice about routers. I have 4 other Apple products all connected to wifi perfectly. This is a MBP issue. Please help.

On the MBP, go to /Library/Preferences/System Configuration
Move all the files in the System Configuration folder to the Trash.
Restart the Mac.
It will not let me log on network saying invailed password
Just in case, open Keychain Access located in /Applications/Utilities
Select Passwords on the left.
Use the search field top right corner of the window to locate your network keychain.
Now right or control click the keychain then click Get Info then select the Attributes tab.
Click: Show password
Make sure it's correct.
And launch AirPort Utility /Applications/Utilities
Select the connection on the left the click Manual Setup.
Select AirPort from the menu then select the Wireless tab.
Make sure the password is available there then click Update.

HT4628 My Mac mini has decided to continuously drop off my wifi network and is incredibly slow to open a web page. Wifi is working perfectly with other devices.

Hi my Mac mini will not stay on the network today and is slower than a pc to lad a web page.
I've followed various suggestions off the web and still have the same problem. 1 second the network is available and working slow and the next it says in network diagnostics that ISP has failed. The router is fine as I'm using an iPad and iPhone and all is working perfectly at +5 Mbps however when I try to open yahoo in safari it take about 5 minutes to open the page and then when I try to create a new mail I get the same Tim delay and then can't enter a send to address!
I've never managed to sort out email either but it not for a lack of trying about 30 different suggestions.
I'm fairly new to mac and am getting very very frustrated with not being able to solve these problems.
Can anyone please steer me towards a step by step or screen by screen resolution please please please help?

Please answer as many of the following questions as you can. You may already have answered some of them; in that case, there's no need to repeat the answers.
Restart your router and your broadband device, if they're separate. Any change?
If possible, connect to your router with an Ethernet cable and turn off Wi-Fi. Any difference?
Are any other devices on the network, and if so, are they the same?
If you can connect to more than one network, are they all the same?
Are all network applications affected, or only some? If only some, which ones?
Is networking always the same, or is the problem intermittent?
Disconnect all other devices from the network. Any change?
Boot in safe mode and test. Any difference?
If possible, turn off Bluetooth and disconnect any USB 3 devices. Any difference?

Devices drop off my EA6350 network every 1-2 days but internet access is maintained

Devices on my network disappear every few days. Internet access is maintained for computers but I can't see other devices on the network. Is there something I need to change in my settings? Do DHCP reservations affect this? The situation is very frustrating as I have to reset the router every time I want to print something or access the my web cam. Thanks in advance for any help. KF6YU
Solved!
Go to Solution.

I'm not sure about the Lease Time to No Limit. I suggest that you do IP Reservation instead or contact Linksys Support for assistance.

Ios 5.0.1 dropping off wap enterprise network when phone goes to sleep

Similar Messages

Maybe you are looking for