IOS 5.0.1 problem with SIM card autorisation
Hi
I have Iphone 3GS
I installed new 5.0.1
And I experiencing problem with locked SIM card / Sim card not installed
Phone I buy in USA and currently use in EU.
I had no problems with IOs 4.2...
Can you please help me out?
Thanks
iPhones bought in the USA are usually locked to the carrier and can't be unlocked. so, if you are using another SIM than the original one, your phone will be locked again to this original carrier after the update.
Similar Messages
-
my phone is iphone 4 (GSM)-american type with IOS5.011 , i have problem with sim card failer (korek type)
Sounds like your iPhone is locked to AT&T. Contact them to see
if you qualify for unlocking.
This link may provide some assistance:
unlocking AT&T iPhones (thanks to wjosten for the link)
http://www.att.com/esupport/article.jsp?sid=KB414532#fbid=Ont7guWFCdY -
I bought an IPhone4 from an apple store in london and have been using it for a month now with no problems. I`m on holiday now in Malaysia and cant seem to get connected. It keeps saying No Sim and says the same on the settings function. It shouldnt be locked, as bought from an apple store. what can be the problem then? any help would be deeply appreciated.
Many other SIM cards/operators? Presumably this is an unlocked LTE playbook.
If not provided with the playbook under a contract, is the SIM card suitable for use in a Playbook?
The "cannot resolve" problem can be browsr cache needing to be ceared but often means you are not getting to a good DNS server, and maybe not even a good internet connection. -
Problem with sim card on N97( sim memmory full)
I just bought nokia n97 unlock and when i put sim card in it work as normal, but one problem is it show the massage indecator that <SIM memmory full> and the envolop sign still in there all the time. i just wonder is there any ways to elimenat the massage indecator on my phone.? is this cuase from SIM card or phone? can anyone give me some advice on this issue. also i try everything but it doesnt work. please help .. thanks you
do you have another sim card you can try in the phone or another phone you can try the sim in ? If so you can find where the fault lies and either replace the sim or have the phone repaired ? If you have no contacts or sim messages on the sim it may be faulty !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' -
Hello, earlier today my phone had a message saying Sim Card not present, or something similar to it. Later that day, I looked again at my phone and it told me to connect my phone to itunes and restore it because it wasn't able to get service. I did so, and now I keep getting error 1002 after it does the recovery process. Is there an easy solution to this problem?
edit
Also, I should mention.. yes my Sim Card is still in my phone. I can take it out and hold it in my hand.
Message was edited by: bacasillasHave you removed and replaced it? That has cured some problems reported in past days.
Phil -
Problem with sim card on my iphone 4s...
My device is not reading the Sim card....it says "searching" and sometimes "invalid Sim" .... not able to recieve calls or texts...it is causing a lot of inconvinience.... if there is a solution pls help....!!
Have you tried:
To reboot the phone by pressing Power and Home for up to 10 seconds and then turning it back on? (see http://support.apple.com/kb/ht1430)
To remove the SIM card and reinsert it? (see http://support.apple.com/kb/ht1438)
That's where I would start. -
how to fix my iphone 3gs after ios 6 ?there is no sim card install in the iphone you ar attempting to activate
Hello James,
Thank you for the details of the issue you are experiencing with your iPhone. I recommend following the steps in the article below if you are getting the message "No SIM" when your SIM card is installed:
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/ts4148
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Iphone 4s ios 6.1.2 problems with 3G
iphone 4s ios 6.1.2 problems with 3G
3G network is going to shutdown after voice call.Bad news guys.
My stuff doesn't work anymore.
No WIFI and i don't for Bluetooth.
I've reinstaledl the 6.1.2 using iTunes with the 4S as new but that was not a good idea ... Maps of my coPilot can't be downloaded because no wifi.
Apple take a quick action to solve this issue ... iPhone is one of my professional tools ... If no solution by the end of next week ... Bye bye iOS and welcome Android ...
PS: no problem with 6.1.2 on my iPad 2 WIFI. -
Problem with RSC card on sun fire v490
Hi all,
I have a little problem.
I got few v490 that were already used.
When I connect to the management port of the RSC card I get the prompt of the RSC password, somthing i don't have.
The OS doesn't get loaded and I can't do anything. ( if I had access to the OS I would have reseted the password)
So now, I got left with the only option i thought of.
1. Disconnect the RSC card,
2. This will force the output of the consol to go to the serial port(tty).
3. Jumpstart the machine (beacuse I don't even have the password for the machine)
4. connect the RSC card, and reset the password.
There is someone here that encountered this problem??
Maybe there is a jumper that can reset the RSC password. i don't know... every response will be great!
Thanks!!!Hi,How to set my link up in solaris 10 ?
I dont know want happend to my machine solaris v440 it suddenly disconnected from n/w and finally i came to know that is a problem with NIC card..i din't find any light's glowing back side of the machine at NIC card.
can any one help me in this pls how can i proceed furture for getting my NIC back?
and i have excuted few commands
#ndd -set /dev/ce instance 0
#ndd -set /dev/ce adv_1000fdx_cap 1
#ndd -set /dev/ce adv_autoneg_cap 0
I have got dladm show-dev is
ce0 link: unknown speed: 1000 Mbps duplex: full
ce1 link: unknown speed: 0 Mbps duplex: unknown
I dont understand that why my link is showing still unknown ...any help.. -
I have problem with 4-in-1 card reader in my laptop.
When I insert 64 MB microSD (with adapter of course) everything is working fine, but 1024 MB microSD isn't working. dmesg shows
mmc0: unrecognised SCR structure version 1
mmc0: error 4 whilst initialising SD card
The card is allright, because in my friend's laptoptop it works fine.
Can somebody help me?Hi
I had a problem with my card reader also.
When I run the command "groups" noticed my user wasn't in the avahi group.
Ran :
sudo gpasswd -a <myuser> avahi
(substitute "<myuser>" by your user)
Inserted the card again and.. voila, it worked!
Greets
Nuno lopes -
Yoga 11s Problem with SD Card reader
Hi.
Just bought a Yoga s11 8/256gb with windows 8 64bit.
When i put in the SDHC card (Is use in camera) in the SD card reader nothing happends..
Tried to download drivers, but not sure if i got the correct one.Hi
I had a problem with my card reader also.
When I run the command "groups" noticed my user wasn't in the avahi group.
Ran :
sudo gpasswd -a <myuser> avahi
(substitute "<myuser>" by your user)
Inserted the card again and.. voila, it worked!
Greets
Nuno lopes -
Has anyone got an answer to fix ios5 problem, no sim card inserted...
Has anyone got an answer to fix ios5 problem, no sim card inserted...
I bought a new sim card today at the t-mobile shop and they activated the card just by putting credit on, i got home put the sim in the iphone and still got the same message. I have restored and shut down I dont know how many times and updated itunes, I am wishing i had said no to updating the phone as i have no iphone to use and apple say i should go to an apple shop.
-
Mega Player 536 problems with SD Card
Hello, can any one help me here, i got me MSI mega player 536 , but i can't play files from SD card. I tried 4. diferent types of SD card. Player register the card, but when i try to open files i got message: "No files fund". I found test of player on www.hw.no, and they write in the test that Player has problems with SD card.
Any one?It's hardware problem with player, i'll get a new one. Then we have to conclude that Mega player 536 has not problems with SD card. Thank's to every one on this forum.
-
Hey guys, how are you?
I just bought an IPhone and I´m trying to get some apps from the ITunes Store.
I created an account but when I try to put my credit card number and security code (from the verse of the card), I get the error script: "Please enter valid Security Code".
I don´t have any problem with my card, it´s working absolutelly normal with any other online shop around the world including Amazon, Ebay, etc...but in the ITunes store, I get this crap error!
I just have this credit card and I don´t wanna do another from Credicard or Amex only because a bug of the system.
Doing a research in past topics, I found other people with the same issue, but didn´t get any answer on how to solve this.
Please, can someone help me?Contact iTunes.
Apple - Support - iTunes - Contact Us -
I move back and forth from school to home, and I've never had a problem with my card before. I recently restored my compuer back to its factory settings, and it was running great with my Airport Express. I came home after moving, and my computer won't read the WPA hooked up in my house. It says I am connected, but won't let me access the internet. I'm not sure why. We tried rebooting the connection, I've looked on my computer, used system preferences and everything. I did notice when I tried to use the Network Setup Assistant, it said the password I used to connect was wrong, but when my computer uses the airport icon at the corner of the screen, it accepts the password. Any ideas on how to fix this?
iBook G4 Mac OS X (10.3.9)An additional distressing note -- I went back to aforementioned building with the 10.4.5 Powerbook last night. Did a cold boot...and the Airport Express picked up the correct network DHCP info immediately. Roamed between a couple of WAPs, surfed a couple of sites, then sat down and tried to duplicate this feat...by re-booting at least 6 more times. Nada. I once again got factory default IP addresses on each attempted reboot. I changed nothing from the network settings I'd tried last week with this machine nor were any changes made to the network or WAPs. DHCP didn't work last week on several attempts (and reboots), worked ONCE yesterday on the first boot, then nothing again on the subsequent reboots.
Again, I'm stressing that there don't "seem" to be problems with the network or WAPs because Windows clients consistently obtain DHCP and authenticate without issue.
Does anyone have any ideas?
Maybe you are looking for
-
IdeaPad 10Se and running software requiring at least 800 x 600 grafic resolution
I have bought an IideaPad 10Se this week with the 1024 x 576 resolution. I have problems installing harwere requiring at least 800 x 600 resolution. I installed my HP writer that requires at least 800 x 600 by attaching an external screen and made on
-
The battery icon on my (old) MacBook Pro turned red. Then black. What does this mean?
The battery icon on my (old) MacBook Pro turned red for a few moments, then black. What does this mean?
-
~URGENT~ Hacked Skype Account ~URHENT~
Hello, I am Micheal (poppopsea) on Mar 28, my account password was changed as seen here: http://prntscr.com/6xgzvf , I been trying to get the account back since. I have filled out the password recovery form about 20 times and each time I get an email
-
Everytime I press the home button to go to the main menu so I could make a call or any other thing it just goes directly to voice call without holding it too long! Help pls! I dont have an Apple store close! thnks!!
-
How can I use several albums for a book?
I started a book but I cannot change the album I want to pull photos from without starting a new book. Any suggestions?