IOS 5.1 audio drop outs - bring back my music!

I was in the car listening to iTunes via Bluetooth and later via an iPhone dock connector to stereo cable. On both occasions iTunes also dropped all audio the first time another app made any noise. For example, I'm listening to music and then my GPS app tells me the next turn, as soon as she finishes talking the music audio drops out. The next time she tells me to turn I hear my music playing in the background, but it drops as soon as she stops speaking again. If I turn off Bluetooth, then force a connection back to my stereo the music works until another sound happens, even the beep of a new email will cause the audio to be lost.
As I sit here and type this I could hear the clatter of the keys, until a moment ago when I received an email (and got the email sound), now the keyboard is silent.
I just got another email (c'mon people, it's 6am on a Saturday!) and the keyboard sounds are now back.
My wake up alarm just sounded and my keyboard audio is gone again.
Didn't notice this until the iOS 5.1 update. It definitely did not occur previously, as I used my iPhone for music driving cross country the week prior to the update.
Thanks,
Sean

Where's the backup of your laptop from before it crashed?
http://support.apple.com/kb/HT2519

Similar Messages

Preview Files Suddenly Go Missing, Render Entire Work Area Crashes Premiere, Audio Drops Out

I opened a Premiere Pro project I was working on earlier today and it said it couldn't find the preview files, searching my system found that the files didn't exist.
Rendering my entire work area brings up the "render window" but nothing happens, if I press cancel Premiere freezes.
Started getting a strange situation error ( 26 ::139 ) in After Effects at the same time that Premiere lost the preview files and the crashes started happening. It disallows me from editing any dynamically linked projects. In Premiere the DL's just show up as "Media Pending" clips indefinitely. Importing the compositions in AE into a new project didn't fix the issue either.
The three problems above started happening all at the same time, was working through a color grade using Red Giant software when it started happening.
Also audio drops out on playback randomly in Premiere Pro, tried various audio drivers and hardware, none entirely eliminate this problem. Sometimes the audio will cut out and "burst in" distorted very loudly, which is disturbing, even when my work area is rendered. This problem has been around since I started using PP CC.
I can provide more info soon or if people want more info pls let me know, I'm very tired and I need to get this issue resolved for tomorrow, in the mean time hopefully someone can point out a general fix for these errors or knows a few workarounds. Tried reinstalling PP and AE, no luck.
Computer is a Windows 7, 64-bit. i7 950, 12gb RAM, GeForce GTX 650, programs installed on a separate internal HDD, media files on another internal HDD. But these same issues (minus the audio dropouts) was also cropping up on a core 2 duo 13'' macbook pro.
Regards,
Zach

Hi Arjun, thank you for your help.
Though that didn't work either. At least the timeline will playback but as soon as I try to render my work region or export any video Premiere freezes.
I removed all dynamic linked files as well, that didn't seem to change anything.
Something I noticed -- the render bar on the timeline that is usually yellow for edited clips that have no FX on them is all red, nothing is yellow (or green). This is a 4 minute long edit on a music video, nothing extraordinary.
I tried creating a new project and dragging a few clips in and editing them, everything went normally and I could render and export the clips. Just any rendering done on any version of this music video edit I'm working on crashes the program.
Also recently had a problem where I opened the music video project and the song that I imported (.mp3) all of a sudden has no waveform or sound coming from it. Dragging it back into the project doesn't fix it either. Workaround was using a .wav copy of the song.
Zach

Audio Drops Out

A tiny key piece of audio drops out at start of project. Audio meters show it’s there. Sometimes it plays ok but no matter how much I mixdown it goes silent after applying a reverberation filter. Sometimes there's no sound even without the filter.
Read about the Firewire vs Real-Time. Am using Firewire with DV device. When I shut down FCX, disconnect the DV and reboot, both Firewire and Real-Time grayed out.
I’m ready to burn this 25 min project to DVD but this piece of audio must be in!
ANY suggestions welcome.
Lee

Thanks for the input, Al.
OK. . . . .this is what happened. You were right. I finally located an earlier version of the project in the autovault.
I learned that my audio voiceover clip was a mono track and because the project was set for stereo, the voiceover could not be heard. Does that make sense? In a bizarre way, it does to me. I could see it on the audio meter, just couldn't hear it. Adjusting the "Spread" to 0 did the trick. (I thought I had tried that, but maybe not in the correct way or something. I still don't know.) Anyway, the audio clip could be heard perfectly after adjusting Spread. whew
Trashing your Preferences should not have deleted
anything from FCE or the Scratch Disc. Repairing
permissions can be done at anytime, it's a thing that
should be done regularly as a maintenance routine.
Glad to know this. . . .thought it all had to be done in a certain order.
Another question: If you were trying to burn a DVD,
what was behind enabling Firewire out?
Who knows? Quite honestly, I was trying every and any thing that might bring the sound back.
So all's well that ends well. Project is burned, labeled and looks good.
Thanks so much.
Lee

HELP! Audio Drops Out When Trying to Capture Canon XL2 Footage

Please help me out here. I'm a freelance camera operator w/ a Canon XL2 and several times now I've gotten calls from the editors saying they're having problems logging my footage, mainly the audio drops out quite a bit, and I'm not talking bout one second for every 2 or 3 minutes. No. It's like every 10 seconds the audio drops in and out.
What's the deal? Two times the guy was using a Panasonic DVX-100A to capture, another time it was a SONY DSR mini-DV deck. With each incident I had to go over with my XL2 and use it as the capture device, which is a pain.
The program they're using is FCP HD or 5. But I think even when they just play the tape in their Sony or Pany cameras, the audio may still suck.
Help me out here, I can't be the only one with this problem.
Thanks.
-R

Well Robert Swanson, I hope my post wasn't taken offensively, it certainly wasn't meant as such. The only Canon camcorder I owned was the GL1. After switching to Sony's I can honestly say it would take something significant to go back. And, I was merely relating my experiences in trying to capture from other Canon camcorders so that I know where you are coming from. However, I am interested in the HVX being the "noisest" camera on the market. I am seriously considering this camera and would be interested in a review that points this out. I would be using the hard drive recorder instead of P2 cards.
Mike

Audio drop-out in FCPX with 1920x1080 & 2048x1240p @ 24p (codec Apple ProRes 4444 (Linear PCM))24p

Hi all...
I'm new to this forum.
Is there an audio issue (drop-outs) with FCPX (ver 10.1.2) for 1920x1080 24p, 1080p HD & 2048x1240 24p (2k) - note: films in FCPX are in codec Apple ProRes 4444, Linear PCM?
Very recently I've been working on a show reel and I have imported a file (short film) to snip out a section to add to the show reel.
I set the project to the film's settings i.e.. "set based on first video clip"...(1920x1080 24p, 1080p HD). When I play the film in FCPX the audio "hic-cups"..."dips to silence"..."drops-out" briefly (up to 0.5 secs in duration) and very frequently all the way through (approx 15 mins long film)...note: audio set is at stereo 48kHz. The audio monitors on the right hand side also show the dip taking place (if it's a long enough drop-out).
I also have a version of the film in 2048x1240 24p at 2k, again Stereo 48kHz...and this does the same audio "drop-out" all the way through. I'm unsure what other formats will create this problem i.e. higher or lower aspect ratios than those above.
Is this a software and/or OS issue? Or a hardware issue? Or both!?
About This iMac details:
iMac 27 inch: OS X ver 10.9.4
Processor: 3.5 GHz Intel Core i7
Memory: 32 GB 1600 MHz DDR3
Graphics: NVIDIA GeForce GTX 780M 4096 MB
Fusion Drive 3.12 TB
Final Cut Pro X was bought & installed with this iMac back in Feb 2014
FCPX version: 10.1.2
Note also: I used Compressor (ver 4.1.2) to convert the files (movies) above to Apple ProRes 422 HQ, Linear PCM and the issue disappeared - the audio and visuals played with no problems. All films play with no issue when opened in QT player. They are also fine when exporting from FCPX. The issue only occurs (as far as I can tell) within FCPX when editing or playing the audio there.
Has anyone encountered this problem?
Kind Regards,
Hakan

Hi Luis,
Thank you for that.
Seems like you have a point about the "hardware" issue. I'm unsure (new to it all) at what data rate my (er...wonderful) fusion drive provides FCPX for smooth playback - or where I can find that info on the iMac. Playing back movies in the 422 HQ codec seems to have no issues (when I converted the movie from 4444 HQ).
But playing the full 4444 HQ, the picture is smooth, but the audio has these drop-outs - even with "best performance" option ticked. Interesting that the audio suffers, not the picture in FCPX - so not sure what's going on there. I also read - perhaps - that to play a smooth ProRes 4444 HQ movie in FCPX the data rate should be min of 500 Mbs (based upon About Apple ProRes) for HD movies and up (i.e. 2k). ProRes 422 HQ needs a data rate of 220 Mbs - so that is my upper-limit to smooth video&audio playback with the current system I have, I guess.
Does anyone recommend a fast USB3 or Thunderbolt drive (500Mbs+) where I am able to run 4444HQ movies with no issues to picture or sound (away from the fusion drive)?
KR
H.

Audio drops out when following video to external monitor

When I play a sequence to an external monitor, the audio drops out for 2 to 3 seconds after changes on the video track, and then pops back in with no interuption in video output. It doesn't happen at every cut, but it's consistent in the places it does. I thought it might be caused by the size the project has become. So I exported the sequence as a quicktime file, closed the lage project, opened a new one and exported the new file and played it and it happened again, even though there were no edits. It doesn't occur at all when I turn off external video, and play it on the computer. I connected a new firewire from the computer to my DV deck, restarted the computer, but it keeps happening.
Is it that the dramatic change in color, light and compostion crowding out the audios ability to follow the video through the wire?
I'm completely stumped. The next step will be to open the computer and try to blow any excess dust out. I do this periodically anyway, and my last time was two months ago, so I'd be surprised if it works.
Maybe the G4 with 2G processing power can no longer handle the program, but it shows no sign of stuggle in any other way.
My clients are starting to grow restless.

Thank you so much X & Paul, for your suggestions. Although they didn't solve the problem, they kept me hopeful enough to continue my quest for an answer. After exhausting all effort to find the problem in the audio, I decided to focus on the video. So, I tried correcting the excess luma on the consolidated QT movie, and suddenly the problem was fixed. Because of the different levels of correction I'd need for each and every cut in the original sequence, and the precious time it would take, I'd planned to save it for the color correction stage, a mere 2 weeks away. I remembered how illegal white would often cause the image on some monitors, specifically consumer TVs, to waver for a second. But this was happening all the way back to the DV deck's audio meter, so I never expected it to be a luma issue.
I assume that the outdating capacity of my G4 played a part, but I wanted to write back with my thanks, and to impart my illuminated wisdom to the next perplexed soul.
Thanks again,
jesterhead

Is itunes 8 fixed (audio drop out)?

itunes plays fine for a number of tracks and then the audio drops out completely at the beginning of a new song despite the interface appearing to be playing as normal.
This was the major pain - even though it only took a pause and restart to get the audio back - it happened so frequently. I should point out that this may be related to my airport Express network, but it went silent on both my external speakers and my computer.
I found a number of posts outlining the same problem but no solutions that worked apart from one great one (sorry, can't find it now) which confirmed it was a problem with itunes 8. True enough, after exhausting every other avenue, i have reverted to itunes 7 and the problem has disappeared.
The problem is that I have lost many other upgraded features so can anyone advise me as soon as this issue is resolved in a more up-to-date version of itunes so I can upgrade without the problem returning.

Unfortunately, this is a known problem which Apple seems to be brushing under the carpet. Communication problems using Airtunes has been affecting a lot of users here. Try following the procedure outlines in the sticky of this forum entitled ' Solutions for AirTunes Issues in iTunes 8', and hope for the best. If that doesn't work, I guess you're in the same boat as the rest of us, and will have to wait till Apple sorts out this problem.

Audio Drop Out/Popping sound Problem

Hi,
For the last few weeks (since i installed snow leopard i think), i have been getting a lot of audio drop outs, where all of a sudden the sound goes dead and i get a popping sound coming from my speakers.
I am using a pre sonus fire studio project audio interface, with its firmware updated to the latest (the latest update was a beta snow leopard update).
I am running logic pro 8 with snow leopard 10.6.2.
I think i have narrowed the problem down to my presonus fire studio because i totally disconnected it and used logics built in audio soundcard and i didn't get any audio drop out at all.
I was just wondering if anyone had any similar experiences or ideas and suggestions on what is best to do?
thanks in advance for any help.
Tom

It depends, are you running off battery when this happens? If so then morethan likely it is the audio hardware coming back online. In an effort to conserve power, what Mac OS X does is when you are on battery is that it turns off your audio hardware when it has not been used for a certian amount of time. This popping sound is typical of the audio hardware being powered up.

Audio drop outs and continuing problems- Apple Support informed again.

Hi All,
Have had various audio problems with iMovie transfer to iDVD 6. iMovie had the problems initially but a weird trick seems to be helping me.
Copy a random new audio track into my film, paste it, then cut it out then empty trash..... all of a sudden my audio is clean again and perfectly in time with the video. I have informed the iMovies people in Ireland and they are at a loss to explain why this is now ok.
BACK to the plot and iDVD 6.
When I try to export this project from iMovie in iDVD 6 it either becomes an audio garbled nightmare or if I try and import into iDVD 6 I get audio that gradually becomes out of sync with the video visual. I know that this project was recorded in 16 bit audio so no joy there.
I've told Apple in Ireland that there are major audio issues with iDVD 6's audio set up + something they were apparently unaware of. I was assured that the tech dept's would investigate and solve. I am really surprised that they hadn't seen this problem in this forum!!
In the meantime any advice is very gratefully received. I'm on an Intel G5 Imac with 1.83ghz 1Gb sdram and 250 GB HD. So Software is currently limited!! I desperately need to get this project to DVD!!!!
Many thanks,
GUY

SAME EXACT THING HERE. This is what I posted in a diff thread:
2013 iMac 1TB Flash Drive
OS 10.8.5
Constant audio drop outs using Apogee Duet. I have to unplug and replug several times to get the system to recognize it. Sometimes when it is connected, Audio Prefs doesn't even recognize it and it shows up as "Unknown". When I click Audio Prefs before I get in, I get the spinning beachball and it takes a while for it to open. I have been in touch with Apogee but to no avail. It seems to work on my 2013 Macbook Pro, but I haven't tested extensively. It seems to get tripped up if I'm working in Ableton and get a Facetime call or if I try to use Youtube / Soundcloud. The system gets noticebly slower. When I switch back to Ableton, Duet is recognized (sometimes not recognized at all) but I cannot play anything inside the project window.
Not sure what to do at this point

Audio drops out of movie but not menu

I have an iMovie that I burned to disc successfully via iDVD. Then, I went back to the movie, made one small text change to a title page, resaved, and tried to burn again. Since then, I have lost the audio every time I try and burn the DVD again.
What's odd is that the movie audio drops out, but the menu audio is still there. Also, when I 'preview' the movie in iDVD, the audio is working just fine. I have five songs in the movie.
Any ideas?
Thanks so much!
(These are iMovie 6 and iDVD 6 btw.)
iMac G5 Mac OS X (10.4.7) 2.1 GHz, 512 MB Memory

After you made the change in iMovie, did iDVD ask you to update the project?
First go to iMovie and "extract audio" This is often a catch-all for some audio issues. Close iMovie.
Then go back to iDVD, open the project - if iDVD asks (and it should) choose "update" Then "delete encoded assets"
Then use "Save as Disk Image". This will do everything but burn your DVD - it will save the encoded project to a .img file. After iDVD is finished encoding, double click on the .img file, and it will mount like a drive. Use the DVD player application (it may launch on its own) to view the image.
If this .img file has good audio, then burn the image with Disk Utility (in your Applications/utiltiies folder - see Disk Utility help for how to burn the .img file)
If this still has audio that drops out, I'd suggest building a new iDVD project with the edited move.
John B.

Audio Drops Out at End of Imported Clips

Hi, Guys,
I have read everything and tried everything, but I can't find a solution to something which seems like it should be obvious:
I am in the process of uploading some TV programs to YouTube. I am using iMovie '11 to cut them into chunks of less than 15 minutes each. When I import the material into iMovie from a file, iMovie automatically breaks the source material into ~5 minute clips. For some reason, the sound for the last half-second or so at the end of each clip is automatically muted by the import process. Needless to say when I cut the clips back together in an attempt to recreate the video stream as it originally was, there is a half-second of audio drop-out marking the spot where the clips are welded together.
How can I get this to stop???
I notice that the advertising makes a big point of 'iMovie HD' allowing the user to adjust the length of the clips that it cuts source material into during import. Please tell me this is not a work-around for this problem 10 years after-the-fact!
Thank you.

I used to have a saying which I applied to John Cage's compositions:
"He's got nothing to say, and he's saying it. And that's BS."
Faceless capricious corporate censorship is good HOW?
As regards iMovie '11 muting a short bit of audio from the ends of clips, it turns out to be the beginnings of the clips:
My prior post uncovered a very different problem in my process. (At the time, a virtually non-existent process!)
Now I have learned my up the learning curve to the point where I am beginning to actually use some of the functionality in iMovie '11. Unfortunately my original observation of "a bit of sound" (50 to 100 milliseconds) disappearing between clips is still a problem. Here are 3 minimalist examples in the form of short test vids: {Just click "Play all". Titles projected over the vid list what you are hearing. The "about box" (YouTube "Description:" field) contains even more detail.}
http://www.youtube.com/viewplaylist?p=7E219251FC3C5FEC
I can now characterize this problem in more detail than I could previously:
The first 50 - 100 milliseconds of sound are squelched in the beginning of a clip when it is uploaded to YouTube from iMovie. This is NOT a YouTube transcoder issue. Reloading multiple copies of the same clip into iMovie yield the same result there: Dead sound between clips.
This demonstrates that iMovie chops the first ~50 milliseconds of audio off of the beginning of a vid when it "shares" (exports) it. Apparently the missing audio in some way becomes an "attribute"of the clip (like a crossfade transition that you can't remove from the beginning!), because attempts to trim the squelched audio off of the beginning of the clip meet with failure; the "bad leading edge" stays with the clip, even after the apparently offending segment has intentionally been discarded.
I checked the audio gaps with Audition, and, while I was guessing 50 - 100 ms, it turns out to be exactly 52 milliseconds of audio is squelched at the beginning of a clip. (I tried to display the image of the spectral & time-domain response here, but I can't figure out how to upload TIFFs into this forum.)
I am sure this must be the result of some simple default setting in iMovie which automatically adds a "style" or something to my vid clips upon export, but I have tried everything I can find, and, if it is, I haven't managed to reliably turn if off yet.
N.B. if I remain inside an iMovie editing session, and paste pieces together into clips without exporting the clip, or interrupting the session (as I did to produce the test vids), everything is fine. But as soon as I save a clip, the first 52 ms of audio seems to irrecoverably disappear. That continues to hold true no matter which frame in the clip subsequently becomes the new beginning.
Please forgive my iMovie newbie ignorance, but: How do I get it to STOP???
Thank you.

Audio drops out on mac

This just started about an hour ago or so, i was watching a video on my mac mini on youtube and every 10 seconds or so the audio drops out for about a second or 2 and comes back on. this happens every 10 seconds. i restarted my computer and it still happens. this has never happeend before, any ideas as to whats going on?

TGlen,
Can I get the specifics of your Mac and any third party hardware that is connected including drives and capture hardware? FAQ: What information should I provide when asking a question on this forum?
Thanks,
Kevin

Audio drops out while video continues to play just after making a cut!

I've been using Adobe Premiere Pro for a few months now and I use it to edit my YouTube gameplay videos. Here is everything I am doing in Adobe Pr:
1. Create new project
2. import my raw gameplay video (m2ts file)
3. import my wave sound file (my commentary)
4. Put them on the time line and play the video (it works then)
5. make a cut somewhere and the GAMEPLAY audio drops out not the video or my commentary.
The same thing happens in Adobe Premiere Elements as well. Should I convert my m2ts files to MP4 or AVI or something??? Please help

Last week, this song played fine on the burned copy.
Is this problem now showing up in the iDVD preview mode? Or is it with subsequent burned DVD's?
Go back to your project in iDVD. Go to File>Save as disk image. This will create a file that can be viewed on your computer's DVD player. The disk image will show you how your project will appear when played on a standard DVD player. See if this problem is repeated. If everything is fine, go ahead and burn the DVD using Disk Utility.
I hope this helps.

Audio drops out when scrolling playlists after upgrading new version of 9.2

Hi Folks,
Has anyone noticed an issue when scrolling the playlists in Itunes now that the audio drops out for a second.
I use an external USB audio device by Native Instruments called the Audio Kontrol 1.
I have watched the processes on my PC and when I scroll up and down on the playlist. Something spikes causing audio to not play for a second.
I am hoping to fix this somehow as I do not want to roll back (not even sure if you can). I also have heard with dual core processors that occasionally audio can get stopped as other processes take over where in single core processors everything cued up (any truth to that).
Any help at all would be greatly appreciated.

Thank you so much X & Paul, for your suggestions. Although they didn't solve the problem, they kept me hopeful enough to continue my quest for an answer. After exhausting all effort to find the problem in the audio, I decided to focus on the video. So, I tried correcting the excess luma on the consolidated QT movie, and suddenly the problem was fixed. Because of the different levels of correction I'd need for each and every cut in the original sequence, and the precious time it would take, I'd planned to save it for the color correction stage, a mere 2 weeks away. I remembered how illegal white would often cause the image on some monitors, specifically consumer TVs, to waver for a second. But this was happening all the way back to the DV deck's audio meter, so I never expected it to be a luma issue.
I assume that the outdating capacity of my G4 played a part, but I wanted to write back with my thanks, and to impart my illuminated wisdom to the next perplexed soul.
Thanks again,
jesterhead

ITunes scratchy he||...with audio drop outs

I use iTunes v7.4.2 all the time to play music. Only lately my iTunes has been sounding very intermittently scratchy (static-y) and the audio drops out (without the diamond moving) at unexpected intervals (anywhere from 10 sec to several minutes). When I try to hit the volume buttons, I don't get any feedback sounds like usual. Waiting it out seems to be the only remedy...then it comes back again, and again...
I use MenuMeters to monitor my CPU and bandwidth speed and so I notice that this happens most when I am downloading torrents. Very frustrating! Curiously, I tried running a bootable clone of my system on a separate drive and I found that the problem went away (I'd have to run it for longer to be sure though). Could this be a sign of imminent hard drive failure?
Has anyone else experienced these issues? Does it sound like a hardware or software issue?
Thanks for any replies,
-Bill
Message was edited by: BillytheKidney

I am going to keep researching this issue for you.
Be AWESOME Everyday!
Donate KUDOS and Click "Accepted Solution"
Did someone help you today?
Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

IOS 5.1 audio drop outs - bring back my music!

Similar Messages

Maybe you are looking for