IOS 5 Custom Vibrations not working

I am trying to assign a custom vibration to a specific person in my Contacts on my iPhone 4. I have activated, created and saved the vibration as instructed and I have assigned it in the edit contact screen. (When in the edit contact screen I have three 'sound' option menus: One titled 'Ringtone'; underneath that, one titled 'Vibration' and then separate and under that, one titled 'text tone'). I have assigned my custom vibration under the 'Vibration' menu.
However, whenever that specific contact sends me a text message, my phone still vibrates with the default two 'vibrations', just like it always has. It will not do the custom vibration.
I have a feeling it has something to do with the 'text tone' option menu, but it does not give me any option to assign a vibration in that menu. I have not been able to get any other vibrations other than the default vibration when I am sent a text.
How do I get this working? I have tried it on a few other contacts with the same results.

After hours of fiddling I've come to the same conclusion as all of you. Customer vibes ONLY work with phone calls.
cpage,
I'm with you, apple needs to enable custome vibrations for:
1. Calls
2. Texts
3. Emails
PLEASE READ THIS APPLE.
Thanks.

Similar Messages

Vibrating not working for IOS 7.1 on iPhone 4

Vibrating not working after upgrating my iPhone 4 to IOS 7.1
can someone help here?

If you update ur iphone 4 and lost all those features, the only way you can fix it is with itunes, plug in to ur computer and restore the IOS , before do that make sure to back up all ur info on icloud and ur computer.
Good luck

Vibration not working in silent mode

Vibration not working in silent mode

Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo. Then give it a try.

Ios 6.1 does not work anymore. Video sites

some videos on sites that previously ran with quicktime, now after upgrading to ios 6.1 does not work anymore.

Examles, please.

IOS 6 Notification sound not working!!

Hi everyone, when I updated my iphone 4s to the latest version of OS meaning IOS6, I noticed that the sound in notification is not working. Only displaying the notification. Anyone anyone else have this problem and if so how to solve it please ?

NattyNoodle
Re: IOS 6 Notification sound not working!! Sep 28, 2012 11:25 AM (in response to keith-gauci)
I've had exactly the same problem! Also the silent button on the side isnt working either. Calls seem to be ok, but emails sms facebook, none of those sounds work. Have you found a solution?
No I haven't. The difference is that my silent button is working and even sound when receving and email or an sms's. My issue is the sound of the notification of the applications. For example facebook, F1Live24 ..

Ios 8 restrictions password not working

Ios 8 restrictions password not working .... But 'am sure i didnt forget it !! ....what shall i do ?!!

Howdy Kanfoud,
If the iPhone isn't accepting the Restrictions passcode (which can differ from the normal access passcode), you'll need to restore the device.
If you lose or forget your Restrictions passcode, you'll need to perform a factory restore to remove it.
About Restrictions (parental controls) on iPhone, iPad, and iPod touch
https://support.apple.com/en-us/HT201304
Sincerely,
Allen

Ok so I use an hdmi connector on my iPhone 4S to watch netflix. But after I updated to iOS 7 it will not work my tv doesn't receive a signal. Does anyone have any insure to this please help .!.!.

Ok so I use an hdmi connector on my iPhone 4S to watch netflix. But after I updated to iOS 7 it will not work my tv doesn't receive a signal. Does anyone have any insure to this please help .!.!.

The 8 pin Lightning connector can only output 720p and lacks all iPod Out functionality unlike the full iPod Out functionality and 1080p that the 30 pin connector has and I suspect that they are coding iOS 7 specifically for the new devices which have severely reduced abilities and perhaps skipping adding the code needed for 30 pin devices to use their functionality with HDMI, etc.

Iphone4 vibration not working after upgrading to ios 7

I upgraded my i phone 4 to ios 7 and drom then vibration is not working....!!!
I dont know how could apple lag this feature in a iphone4 ios7
I find my iphone really annoying without the vibration feature

I should also mention, I've tried multiple browsers (Chrome, Safari, Opera), all with the same result.

Iphone 4 vibration not working after upgrading to ios5

Hi,
I have upgraded my iphone4 iOS from 4.3.5 to iOS5. Then onwards my phones vibration seems not working. I tried with restoring with itunes but doesn't helpful to me. Could anyone face this issue/any resolution.
FYI... apart from vibration, remaining alerts are absolutely working fine.
Thanks,
Bala K

Solution found: iphone 5, iOS 7.0.6
Settings > General > Restrictions > (enter passcode) > ...scroll down to "privacy" section and select Microphone > Tick "Allow Changes"
Then open Skype App, and it will request access to the Microphone > Allow
Note, on this screen you have the option to disable all restrictions, or Allow (un-restrict) only specified Apps (e.g. Siri).
Hope this helps.

IOS 5 iBooks Bookmarks not working

Hi,
Since I updated to IOS 5 I can't bookmark a page in iBooks. Is anybody else having this problem and has anybody found a fix for it?
Thanks
Steve

After hours of fiddling I've come to the same conclusion as all of you. Customer vibes ONLY work with phone calls.
cpage,
I'm with you, apple needs to enable custome vibrations for:
1. Calls
2. Texts
3. Emails
PLEASE READ THIS APPLE.
Thanks.

Vibration not working in iphone 4

Vibration mode is not working in my iphone

Hello NsmG,
Thank you for using Apple Support Communities!
I have some suggestions to troubleshoot the vibrate function. If you have not already, first go ahead and restart your iPhone.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, next I would close all the apps that are running, restart and test it again.
From the Home screen, click the Home button twice.
Tap and hold on the app.
When it starts to jiggle, tap the to close it.
Double-click the Home button and try opening the app again.
From: iOS: Force an app to close
http://support.apple.com/kb/ht5137
And lastly you may need to backup your device to iTunes, and restore it if the previous steps do not work.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Take care,
Sterling

Iphone 4 not working with iOS 6, Iphone 4 not working with iOS 6

iOS 6 is not working on my iPhone 4. When the update/restore finishes it gives me the (-1) error and cannot finish the update. Please help.

Hey.. I have had this issue since yesterday afternoon.. Some people are saying to keep restoring again and again until it finally goes through.. I have done so like 10 times on my MAC and then I used my husband's PC and tried it 4 times.. No success.. I called apple support, but no help came from there at the end, and the only thing they were able to suggest to me is to sell me a new phone just like mine for a discounted price.. **** NO
Anyways after about 18h of search and stress I came across this link:
http://techglobex.blogspot.com/2012/06/downgrade-from-ios-6-beta-firmware-to.htm l
That will only make it possibe to go backward.. You will end up back with the IOS 5, but at least you will have a working phone and it will bring back all your contacts and everything else that you ever had backed up on icloud and on your computer. There might be descripencies with the Applications but again this is an issue easily solved, you can always download them back.
Two more things: One, you do not have to download the old version of the itunes, the newest version worked for me without any issues
When choosing to download the older IOS 5.1.1, you will need to figure out whether your carrier is GSM or CDMA but you can easily google this info online..
Well hope that will work for you like it did for me

Home sharing - cannot connect to media library - iOS 4.3.1 not working

This question might be answered... Posting anyway in case it helps anyone else (did not find answer when I searched). Feel free to ignore or contribute as you wish.
iPhone 3GS currently streaming a movie from MacBook Pro iTunes library so home sharing is working. It connected fine the first try.
iPad has not been able to connect. When it tries, it shows the library in the list. I select the library and the spinner starts. After about a minute (60 seconds) the error says Cannot connect to media library.
I have tried logging both devices off the wifi and logging back on while they are sitting right next to each other.
My wifi is set up with the wireless modem (n) with an Ethernet cable to another router used simply to extend the signal to the other side of the house (same network name -- this will probably cause some questions but I can't be sure it's the problem) ... So far AirPlay has worked fine, Apple tv works fine.
The library is not too large, only 1,000 songs and a couple dozen movies.
Not sure what other variables would be relevant.
iTunes 10.2.1
OSX 10.6.7
MacBook Pro
iPad (not iPad 2) iOS 4.3.1 (8G4)
iPhone 3GS iOS 4.3 (8F190)
Hmm... I wonder if that is the problem. The version on the iPad (not working) is newer than the iPhone (working).
I thought I just updated both to the newest but I guess 4.3.1 is only a few days old.
Might have just answered my own question.

There is definitely something wrong with 4.3.1.
My setup:
iMac OS X 10.6.6
iTunes 10.2.1(1)
iPhone 4 4.3.1 (8G4), Remote app on this phone was working fine with ATV's until I upgraded it to 4.3.1 today. Now it can not find the home share library or the ATV's.
iPad 2 32GB Verizon 4.3.1 (8G4), Just upgraded to 4.3.1, not seeing home share library at all.
ATV2 OS 4.3 (8F202), Software 4.2.1, Was working until the last update, now don't see home share library at all.
ATV2 OS 4.2.1 (8C154), Software 4.1.1, This one I did NOT get the update, works fine with no issues at all.
I have tried to turn Home Share On/Off, turn ATV's/iPhone/iPad On/Off and reset Home Sharing. Nothing works. I think it is pretty telling that the ATV without update works fine were all devices with 4.3.1 stopped working.
Apply please fix!!

Customer Workflows Not Working from SRM Inbox

Hi everyone,
We are upgrdaing our EBP v3.5 system to SRM 5.0 (SRM SERVER 5.5 SP 5).
We are using integrated ITS and have many bespoke workflows which need to executeable in the SRM inbox via the integrated ITS and ultimately the portal (EP 7.0).
We have various issues with our bespoke workflows not working. The 2 errors we have found are:
1. When the users click on the workitem from the SRM inbox they sometimes see 'Service Cannot be Reached' error.
2. Other times they see the workitem details with no user decision buttons shown.
3. Other times the user decision buttons are shown but if the user clicks on one, they see a blank page with text "workitem currently locked by user WF_BATCH" at the top. This is an 'advance with dialog' task which works fine via SAPGUI.
Any ideas on any of the specific issues, or anything which we need to do generally to get custom workitems to be executeable via the ITS?
Thanks a lot,
Nick

Hi abhijit,
I checked that but I set it to blank in debug mode..but its still disappearing...the button disappears after pressing enter on error message.
actually the BADI when I implemented there is one method where I set E_ADD_ON_ACTIVE flag to 'X' to bring that button(recommended by SAP). that method is not getting called...

Flex 4: Custom ScrollBar not working in Custom DropDownList

Hello,
I'm having an odd issue that I just cannot figure out. I have a custom DropDownList .as component (to pass color values) and a custom skin. In this skin I am using a custom Scroller (same AS file component with mxml skin). When I use this configuration, clicking on the scrollbar just closes the DropDown. If I remove the skin from my custom scrollbar it works, which leads me to believe it has something to do with the DropDown skin. Even if I revert my custom Scroller to the spark Scroller, it still doesn't work. I've narrowed it down to what seems like a problem with my DropDownList skin.
Not really sure what code to put here, but all I've been doing is right clicking my project and making new ActionScript components and MXML skins from the default skin. Here is my DropDownList skin, not sure if I should paste any other code? I have no idea what would be causing this, so I don't really know what code to place.
      [HostComponent("ccm.DropDown.DropDownList")]

Woops, the code didn't place correctly, here it is:
<s:SparkSkin xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark"
    xmlns:fb="http://ns.adobe.com/flashbuilder/2009" alpha.disabled=".5" xmlns:Scroller="ccm.Scroller.*" xmlns:DropDown="ccm.DropDown.*">
    <fx:Metadata>
          [HostComponent("ccm.DropDown.DropDownList")]
     </fx:Metadata>
    
     <fx:Script fb:purpose="styling">
          <![CDATA[
               import flash.filters.BitmapFilterQuality;
               import flash.filters.BitmapFilterType;
               import mx.controls.Alert;
               import spark.filters.*;
               /* Define the content fill items that should be colored by the "contentBackgroundColor" style. */
               static private const contentFill:Array = [];
                * @private
               override public function get contentItems():Array {return contentFill};
                * @private
               override protected function updateDisplayList(unscaledWidth:Number, unscaledHeight:Number):void
                    openButton.setStyle("cornerRadius", getStyle("cornerRadius"));
                    super.updateDisplayList(unscaledWidth, unscaledHeight);
          ]]>
     </fx:Script>
     <s:states>
          <s:State name="normal" />
          <s:State name="open" />
          <s:State name="disabled" />
     </s:states>
     
     <s:PopUpAnchor id="popUp" displayPopUp.normal="false" displayPopUp.open="true" includeIn="open"
                       left="0" right="0" top="0" bottom="0" itemDestructionPolicy="auto"
                       popUpPosition="below" popUpWidthMatchesAnchorWidth="true" >
          
          <s:Group maxHeight="134" minHeight="22" >
               <s:Rect id="fill" left="1" right="1" top="1" bottom="0" bottomLeftRadiusX="16.5" bottomRightRadiusX="16.5" topLeftRadiusX="16.5" topRightRadiusX="16.5" >
                    <s:fill>
                         <s:SolidColor color="0xFFFFFF" />
                    </s:fill>
                    <s:filters>
                         <s:GlowFilter
                              color="0x000000"
                              alpha=".35"
                              blurX="6"
                              blurY="6"
                              strength="1"
                              quality="{BitmapFilterQuality.HIGH}"
                              inner="true"
                              knockout="false"/>
                    </s:filters>
               </s:Rect>
               
               <Scroller:Scroller id="scroller" left="8" top="8" right="8" bottom="8" hasFocusableChildren="false" minViewportInset="1"
                                      showButtons="false"
                                      trackColor="{hostComponent._trackColor}"
                                      thumbColor="{hostComponent._thumbColor}"
                                      skinClass="ccm.Scroller.ScrollerSkin">
                    
                    <s:DataGroup id="dataGroup" itemRenderer="ccm.DropDown.DropDownItemRenderer">
                         <s:layout>
                              <s:VerticalLayout gap="0" horizontalAlign="contentJustify"/>
                         </s:layout>
                    </s:DataGroup>
               </Scroller:Scroller>
          </s:Group>
     </s:PopUpAnchor>
     
     <DropDown:DropDownButton id="openButton" left="0" right="0" top="0" bottom="0" focusEnabled="false"
                                    skinClass="ccm.DropDown.DropDownButtonSkin"
                                    buttonColor="{hostComponent._buttonColor}"
                                    />
     
     <s:Label id="labelDisplay" verticalAlign="middle" maxDisplayedLines="1"
                mouseEnabled="false" mouseChildren="false"
                left="12" right="30" top="2" bottom="2" width="75" verticalCenter="1" />
</s:SparkSkin>

IOS 5 Custom Vibrations not working

Similar Messages

Maybe you are looking for