IOS 5: iPod Touch 4g says no Free memory After Sync
My iPod 4g, iOS 5, 8GB says After Sync no Free memory. Before the Sync there was 1gb Free Memory.... Even if i Delete Apps, the iPod says 0 Byte Free memory...
It was in the category "Other". Now i Have done a Hard reset(i think): i have pressed the Lock Button 5sec, then Lock and home Button 10 sec together. Then it Took a few minutes. In this minutes there was the Apple Logo , Like when the iPod Starts up. After that, everything was okay and i had again 1gb Free memory :)
Similar Messages
-
Ipod touch 2g bluetooth will not connect after syncing with iTunes
Had my ipod touch 2nd gen working with Bluetooth pairing to my Jambox and Boss DVD player and previously had worked with my AudioEngine Bluetooth device. Had a problem with musc files giving me an 1309 error message, was able to just select music manually without sync until this problem came up.
Had to initiate the auto Sync with iTunes which removed the error message for Music and since then my Bluetooth pairing has stopped. Have ver 4.21 and the Bluetooth shows the bluetooth mac address.
The Love is gone for this device. It will not pair up with devices that were working under bluetooth last week.
Anyone have any ideas?- On the iPod try resetting network settings: Settings>General>Reset>Reset Network Settings. You will have to repair Bt defive s and rejoin wifi networks
- Reset the BT devices and repair. You have to see the BT device manual for how to reset them. -
When I transfer music from itunes library to my ipod touch, it says sync in progress on ipod touch, however, the songs don't show up on ipod touch. I have transferred songs in the past with no problem. Not sure what is different now or what I'm doing wrong-I am very new at this and any help is greatly appreciated.
How is your iPod configured to sync music? In other words, what options and configurations do you have enabled from under your iPod's Summary and Music tabs in iTunes?
Maybe have a look at this article as well to verify your iPod is set up for syncing music.
iTunes: Syncing media content to iOS devices and iPod
B-rock -
On my iPod touch it says on the settings i am connected to my home wifi but when I look for the 3. Bars beside the time they are not there this therefore stops me from using internet please help
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. already suggested
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iPod touch screen says it is disabled. Connect to iTunes. When I connect the device to the computer a window pops up and said that the iPod is locked and I need to enter the passcode on the iPod..... I can't get it to do anything. Any ideas?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
cant sync iPod touch. comes up with "cannot be synced because there is not enough free space to hold all of the items in the iTunes library (21.6MB required, 304.8MB available)." I am so confused. I have more than enough space even on PC.
That message is telling you that you do not have enough stgorage on the iPod to accomodate all the media you are trying to sync to the iPod.
Sync less
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Managing content manually on iPhone, iPad, and iPod -
i have an 8gb ipod touch that says its disabled connect to itunes but it is locked..when u connect it to itunes it tells you the passscode is incorrect so what do i do , would like to get it working with out losing everything on it if i can but if not i can redo it
Do as the manual says to do and restore the ipod.
If you are unable:
iOS: Unable to update or restore -
my ipod touch is saying pug in to itunes but when i pug it into my computer to pug into itunes it still wont come on it just has the apple on the screen what do i do
Hi Jess.
My ipod wont even come up in itunes to restore it!
Make sure the battery is charged before trying to restore.
Place the iPod in recovery mode...
iOS: Unable to update or restore
Note: "If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
hi, my daughter hers ipod touch is disabled connect to itunes after say its itunes couldnot connect to the "ipod touch" because its is locked with a passcode please help how to fix connect...i did turn off her ipod touch put usb back on there same in doenot say still ipod is disabled i dont understand please help how???
If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New. -
My password will not let me in my iPod touch it says it's disabled what can I do??
My password will not let me in my iPod touch it says disabled what can I do?
Do as the manual says and restore it:
iPod touch User Guide (For iOS 4.3 Software) -
HT201210 I cannot sync my ipod touch, message says an error occured (6) ! did not find solution ?
I cannot sync my ipod touch, message says an error occured (6) ! did not find solution ?
Errors related to third-party security software
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
I have upgraded the new ios for iPod Touch but i lost all the apps i bought! How can I take my apps back?
just click buy it will say u have already purchased the app u can downloasd it again for free
-
How do I fix my sons ipod touch it says ipod is disabledtry again in 22,181,090 minutes ????
How do i fix my sons ipod touch it says ipod is disabledtry again in 22,181,090 minutes????
You need to connect to a computer with iTunes and restore...start iTunes, connect the USB end of the iPod cable, then while holding the home button on the iPod, connect the 30-pin connector end of the cable to the iPod. The proceed to recover and restore the iPod.
-
i got an itunes giftcard for my birthday and when i tried to add it on my balance on my ipod touch it says the code you entered is not recognized as a valid code. but i just got this card brand new for my birthday.
Make sure you're using the correct code. For most iTunes cards, the code is under the scratchoff area on the back of the card. For more information, see this support article:
http://support.apple.com/kb/TS1292
If you can't get to work after perusing that page, contact the iTunes Store Support; instructions are at the bottom of that article.
Regards. -
My ipod touch won't respond. Shortly after I downloaded IOS 8, it quite responding. All I get is the Apple sign. I connected to my computer and tried updating and was able to download the USB connection for the device but received an error when it tried to update the ipod. Is there any way to retrieve my pictures from the device before I try to recover? At this point my pictures are more valuable to me than restoring the device. How can I get my pictures recovered?
Now it looks like I have the Apple with an line under it on the screen, but still not responsive.Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
How do i get the playlist on itunes to match the one on my ipod?
I have this one playlist, that appears in the order i want it on my ipod, but at one point, when i was looking at it on itunes, i clicked the 'Name' column (to sort the songs by title), and now i can't view it the way it is on my ipod anymore.. is th
-
Archive gap in 9.2, archive logs are gone
Hi all, I've got an old 9.2.0.6 DataGuard setup, it's been running fine for years. We recently had to move our DR server to a new datacenter, so it got shut down, shipped and brought back up. The database came up fine, but now I see that I've got a g
-
Changing Book after it's created?
Hi there, I've created a small softcover book on iphoto '08 and then realized I'd prefer it to be a large hardback book. Is it possible to change the book without have to create a new one from scratch? Thank you
-
Adding a branchgroup to a live scene with swing buttons
Hi, please have a look on the following code. I want to add "objects" in a live scene. I've planned to do this by attaching a new branchgroup to an existing alive structure. The code of the new branchgroup is in the action of a swing button. // metho
-
Hello, I'm using a Dell Inspiron Laptop with Windows7 64-bit, and when trying to install Dreamweaver CS6 everything seems to install ok, but when I try launching the application I get an error that I'm missing ImageOptimization.dll. I've tried insta