IOS 5 NEEDS TO HAVE ALARM ONLY SETTING!!!
This is just a statement, but seriously IOS 5 needs an alarm only setting. If not, I don't even know why they bothered updating the OS. Let's get it together Apple.
And you are telling us this, because??
Stedman
Similar Messages
-
stupid question,, when installing acrobat, they ask for serial number,, i wrote that without the dashes between numbers,, do I need to have dashes between sets of 4 numbers ?
Yes Example:-
1234-5678-1234-5678-1234-5678 -
I have hp photosmart 5510(72f0C3) printer and I would like to setup a printer to my iPad. My network is NETGEAR23. Serial number is CN19E04613005NR. I really need help to have that set up.
Windygirl wrote:
I have hp photosmart 5510(72f0C3) printer
Only the HP Photosmart 5510 e-AiO B111a is included in this document as AirPrint-enabled. Anything other than that exact model number is unknown. There is no mention of an "hp photosmart 5512". Check HP's website for a potential firmware update that may address AirPrint compatibility.
Otherwise you will need to buy an AirPrint printer or multifunction device. -
IOS AP; need to have 2 management IPs ind different VLANS. Possible?
We have the need to add a "secondary" Management IP due to a IP rearrangement.
Ist this possible?
If yes, how?
Thanks,
PeterI'm not sure why you would need a second IP on an autonomous AP. The IP on the AP is just used for managmenet of the AP and other mgmt type tasks like sending EAPOL packets to the radius server, responding to SNMP, etc. As far as the subnet info for the wireless clients, the AP really doesn't care. Its just bridging the packets through the AP.
-
I keep getting a messages that says" the maximum number of free accounts have been activated on this Ipod touch" I only have one account set up. What do I need to do?
Thank youWelcome to the Apple Community.
You should only get that message when you are trying to create a new account.
Unfortunately once all the 3 iCloud accounts have been created on your mobile device, you cannot create any more regardless of what you do. You will need to re-use one of the accounts that you have already created or create your new account on another device or computer. -
I have a Samsung Intensity. It is currently set in "Alarm Only" mode. How do I set the phone back to normal mode so it will ring?
Pumpkin-Hill, Let's get your ringtone working properly. Go to settings and tools, press 'ok', select sound settings, press 'ok', choose call sounds. then press 'ok' and select call ringtone and select the desired tone. Let us know if this helps.
sheritah_vzw
Follow us on Twitter
@VZWSupport -
I have multiple computers set up on homesharing under one itunes account. Can I use face time on all of them or do i need seperate accounts for each?
I'd suggest you consider a cloud-based file sharing service such as Dropbox for this sort of use. iOS is not designed to be synched with more than one iTunes library at a time, so attempting to use it as you describe, connecting a single iPad to multiple computers, almost certainly won't work as you intend and is likely to cause nothing but headaches.
Regads. -
Since I have upgraded from 7.1 then the power consumption increased slightly unbelievable. I have new batteries in my iphone 5 and when I had at ios 7 so was consumption that allows the battery envelope in two days and with ios 7.1 so is it only 12 hours before I need to recharge the battery.
Wrote a little wrong the first time!
Then I upgraded to 7.1 so have power consumption increased slightly unbelievable. I have new batteries in my iphone 5 and when I had at ios 7 so was consumption that allows the battery envelope in two days and with ios 7.1 so is it only 12 hours before I need to recharge the battery. -
What's the deal with the swoosh sound when sending texts? IOS 5.1 needs to have an option to turn it off., What's the deal with the swoosh sound when sending texts? IOS 5.1 needs to have an option to turn it off.
Trax and kirt are correct. I'm pretty good with technology, being an engineer and all, and I can tell you for a fact that this 'swoosh' sound (triggered by a successfully sent SMS) can NOT be disabled from ANY menu in iOS 5. The ONLY way to disable it is to flip the silent switch on the left hand side of the phone. This is extremely annoying for some people (like trax, kirt, and myself). For what we pay for Apple products and, in particular, this phone, we simply didn't expect to have to deal with such annoyances. That's why we're Mac users. Please fix this bug.
I feel like I shouldn't have to say this but it bears repeating: turning off message sounds from the 'sounds' menu does not fix his problem. It still emits the swoosh noise. Whoever suggested this clearly didn't try it because it obviously doesn't work. Who posts a solution to a problem without knowing for a fact that their solution is correct? I find that response condescending because he writer is assuming we're not smart enough to have tried it. In reality, it's vice versa. -
When I try to upgrade and install to iOS 5.1, error message prompt "operation stop running". I have tried several time but failed. Also, would like to know why always need to have wifi access in order to upgrade the version of iPad iOS, what is the purpose of 3G then? This is really nonsense using wifi + 3G iPad. need help ! Thanks.
The file is too large to download via 3G. There is a 20MB limit with 3G. The purpose of having 3G is that you have internet access everywhere and do not need to be near a WiFi hotspot or network.
Not every single thing that you do every single minute of the day on the iPad involves downloading files larger than 20MB. You can surf the internet all day long sitting out in a park somewhere with 3G - but not with a WiFi only iPad - unless you use a hotspot with it.
Try turning off your firewall and anti virus software while you try to download the iOS update. -
just bought an ipad2 3g..how do i set it up ..do i need to have wifi in my home?
See Here for Getting Started...
http://www.apple.com/support/ipad/
iPad User Guide iOS 5
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf -
Traffic not showing in Notifications IOS 7. I have all turned on in notifications and location services allowed in Maps. I have been all over internet, followed set up instructions, even re-set settings (fixed weather not showing) but still no traffic?
I should clarify: I didn't know it fell out, but I check my phone often enough that there were only about 10 minutes between when I last put it in my pocket and then realized it wasn't there.
We asked everyone around us if they saw it, and like 10 people were helping us look. But my husband used Find My iPhone and the Prey app right away when we realized it was missing (again, at most 15 minutes from the last time I used it) and it was already in offline / "cannot locate" mode. -
IOS 7 need to dial only "+" not "0+" how?
iOS 7 need to dial only "+" not "0+" how?
I have this problem too in Belarus. Hey, Apple! What's wrong with you?
And I'm not talking about the wrong group of numbers for 3 years, you can not fix.
+375 (29) 123-45-67 right, but +375 (4475) 12-3-45 — wrong. -
MAC Mail: I have 2 accounts set up. I used to be able to add attachments to both accounts, but now I can only attach using 1 of the accounts. The other one doesn't work.
Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.
-
I have an Iphone 4 using ios 4.2.6 and need to upgrade to at least ios 4.3 or better yet ios 5. I have never received any update notices. I understand upgrades are through Itunes but when I go to Itunes downloads there is nothing there. Help!
Thanks, I tried this and it didn't work. I have a windows xp computer and connected the iphone to it. When I click on the iphone link that comes up under my computer i only get my iphone photos. No other options come up.
Maybe you are looking for
-
Hey, I've build a Process DC with subprocesses. I would like to retrieve my process instance ID, this way, when I am in a subprocess, I could still put a link to the diagram of the main process ! Does anyone have any idea how to obtain it ? Any help
-
i loaded the newest version of itunes and now neither my windows 7 computer nor itunes recognizes my ipod
-
Restoration for Compaq mini CQ10-112nr
My HP Compaq mini CQ10+12nr has crashed I was trying to restore it to factory default and now it will not let me even go to the safe mode screen it will not even sign on, It will go to the screen that will give you the option of safe mode and etc.
-
Error "Data packet not complete; for example, 000013" when reading from PSA
Dear all, I have an issue with my data loading, when i execute my infopackage, i specify that it should be loaded into PSA before going to the data target. in my infopackage request i notice that i have got missing data package e.g. Data package 1 :
-
Export to SVG: Textpath start offset issues...
Simple example: I draw a 1000px horizontal line in illustrator CS5, put a text on the path and drag the starting point to 250px. Illustrator translates the "startOffset"-Attribute of the text-node to something around 32% rather than the expected 25%.