IOS 5 - No repeat button and no shuffle button either

I can't seem to find the repeat button or shuffle button on my iPad. I get a previous, play/pause, next button at the top left, a volume control at the top right and a play marker in the centre that also shows the title. That's it.
Don't say that Apple have removed these functions. They are still in the user guide on the iPad, but they aren't being shown.

I've found that music ripped with iTunes 10.5 and synced to the iPad will allow the shuffle and repeat buttons to appear; I've just imported a CD I received a couple of days ago and it's fine. Anything ripped with a previous version of iTunes and the iPad hides the shuffle and repeat buttons.
However, shuffle stays enabled even when it isn't being displayed, so it's not a huge problem. I just enable it when it's visible, move to another album and the iPad shuffle-plays.

Similar Messages

IOS 5 iPhone 4 no repeat button in music but its stuck on single repeat so i have to manual click next to hear the next track ***!!

iOS 5 iPhone 4 no repeat button in music only shuffle but its stuck on single repeat so i have to manual click next to hear the next track. Very annoying i dont even want to listen to my music. Even on shuffle it was pick a random song then just repeat that track.

With the track selected and olaying, (either the 'musical note' or 'artwork' showing), tap once in the centre of the screen to bring up the sub header - the original 'repeat', 'repeat once' and 'shuffle' icons are displayed - tap once again to hide the menu. Hope this helps.

Repeat on and Repeat off button for Tab Account Assignment on PO

i all,
Can someone explain what does Repeat On and Repeat Off button in tab account assignment stand for?
These are where I found at ME22N, under tab Account Assigment of Item area.
Your help is highly appreciated. Thanks in advance.

Hi,
Go to bellow link,
http://help.sap.com/saphelp_470/helpdata/en/75/ee0de955c811d189900000e8322d00/content.htm
http://help.sap.com/saphelp_srm30/helpdata/en/30/2f20380217de3fe10000009b38f889/content.htm
Thanks,
Raviteja

Hi. The buttons and wheel of my iPod 4th generation do not work. The hold button resets the iPod, and the shuffle shake works. The music plays by shuffling but I can't access albums etc due to the buttons and wheel not working.

Hi. The buttons and wheel of my iPod 4th generation do not work. The hold button resets the iPod, and the shuffle shake works. The music plays by shuffling but I can't access albums etc due to the buttons and wheel not working.

Did you restore from backup?
Next would be to restore to factory settings/new iPod since maybe you have some corruption in the backup

HT5278 How do i download ios 5. I try and try but cant seem to find the download button. Sorry, i feel dumb.

How do i download ios 5? I try and try but cant seem to find the download button. Sorry, i feel dumb.

Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
A first gen iPad should get updated to iOS 5.1.1, and an iPad 2 (and 3) to iOS 6 (iOS 6 will remove the built-in YouTube app and the Maps app will change)

On my ipod when i put the music into a shuffle it just repeats over and over again.What should i do?

does anyone know how to make my ipod touch 4th gen shulffle on music work again?
when i play a song it keeps on repeating it and its really annoying having to change it all the time
what should i do?

While playing any song on your iPod, tap the artwork to bring up the scrubber bar and additional controls. On the left hand side is a option for repeat. You want to make sure this icon is white (meaning it is set to Off). If it isn't tap it either one or two times to change its current setting. The icon on the other site opposite it is for Shuffle.
Any luck there?
B-rock

ITunes 11 / where is the repeat button in Mac version?

In iTunes previous versions, there was a repeat-play button (it toggled: repeat track or repeat entire playlist or don't repeat) down at the bottom of the source panel, same general area as the shuffle button.    Now the shuffle button is up by the playlist title (and it doesn't cause the main window display order to resequence any more, which is ABSURD), and the repeat button is nowhere to be found as far as I can tell.
In the latest version for iOS of iTunes, there is still a functional repeat button on the artwork view of a currently playing track. It will definitely repeat one track, I'm not sure what the toggle to repeat does if it's turned while a playlist of multiple albums is playing.
Anyway what happened to the repeat functions in iTunes 11??     They seem to have vanished from the Mac version at least.
And what's with the lack of "what you see is what you get" when you turn shuffle on in iTunes 11, and the main window display doesn't update to reflect the new sequence of play?   Why should we have to look up in that UpNext thing to see what the shuffled order of play is?!

Hi, I don't have any in 10.4.11 either.

Repeat button set is set to white= off. but next song always plays

Repeat button set is set to white= off, but the next song always plays with shuffle either on or off.
The other two (Blue) Repeat options function properly.
Any ideas or suggestions?

If you touch the screen in album cover mode it will bring up the controls for repeat and shuffle. This is all covered in the iPod User Guide available at: http://manuals.info.apple.com/enUS/iPod_touch_iOS4_UserGuide.pdf

Repeat button for ipod touch

Hi, I have ipod touch 4 generation with ios 6.0.1. but why right now I cannot find the repeat button on my ipod touch? anybody can help me.

I do not see any bar on the now playing screen. I only see the pause, forward, backward, and volume control on the bottom. The title on the top.

I have accepted iCal invitations with repeating events and they have since been deleted from the iCal on my Mac but won't delete from my iPhone. Help

I have accepted iCal invitations with repeating events and they have since been deleted from the iCal on my Mac but won't delete from my iPhone. Help

I experienced this issue as well.
Background:
I had opened an ICS attachment for a repeating event on my iPhone, which added the item to my phone's calendar. I did not have the option to delete the calendar entry from my phone, and the item did not appear on the calendar on my Mac. My phone is currently running iOS 7 (but the problem began quite awhile ago; I don't recall which version of iOS was installed when it started).
Solution (summary):
Create a new calendar, move the items that you wish to delete to the new calendar, then delete the new calendar
Solution (detailed steps):
Create a new calendar
On your phone, open the calendar app
Tap the "Calendars" option at the bottom of the screen
Tap the "Edit" button in the top left corner
Scroll to the bottom of the list and tap the "Add Calendar..." option
Give your new calendar a good name, such as "Delete me"
Tap "Done" in the top right corner to save the new calendar
Tap "Done" in the top left corner to finish editing the list of calendars
Tap "Done" to exit the list of calendars
Assign all calendar entries that you wish to delete to the calendar you created in step 1
Tap a calendar entry that you wish to delete
Tap the "Edit" button in the top right corner
Scroll down until you see the Calendar field (on an iPhone or iPod it's usually just below the bottom of the screen), then tap the Calendar field to bring up the list of available calendars
Tap the name of the calendar that you created in step 1 (e.g. "Delete me"); the screen should return to the main calendar entry page
Tap "Done" in the top right corner of the screen. You may need to then tap the "< Day" button on the top left of the screen to return to the main calendar view
Repeat the instructions in step 2 for each of the calendar entries that you wish to delete
Delete the calendar that you created in step 2 (this will delete all calendar entries assigned to this calendar)
From the main screen in the calendar app, tap the "Calendars" option at the bottom of the screen
Tap the "Edit" button in the top left corner
Tap the entry for the calendar that you created in step 2 (e.g. "Delete me")
Scroll to the bottom of the scren and tap the "Delete Calendar" option. You should be prompted with a warning that explains that "All events associated with this calendar will also be deleted."
If you're sure that the only items on this calendar are items that you wish to delete, tap the "Delete Calendar" button
Tap "Done" in the top right corner to exit the Edit Calendars screen
Tap "Done" to exit the list of calendars. You should now be back at the main view of the calendars app
Rejoice, your pesky repeating calendar events have been deleted
At this point all of the items that you assigned to the deleted calendar should be gone
Repeat the steps above for any entries that you missed
Post another message to this thread if this did not resolve your problem
minor edit for clarity made by ScottHooley

Iphone4 repeat button is gone?!

It can shuffle but there is no repeat button anymore. I've tried double tapping and switching views but still nothing. Starting to get fed up S:

me too and for some reason my phone is in repeat mode whenever i try and play any song unless i am using a playlist - this only started happening since the last set of updates and it basically means i can no longer use the phone to play any of my albums etc
no scrubber bar no repeat control etc
basically it appears as repeat has been turned on an dthen th econtrols disabled to prevent it being changed

Repeat button on itouch missing. Songs are on repeat

The songs on my itouch are on repeat and the repeat button is missing. Shuffle button seems to be working but the songs keep on going into repeat mode

There seems to be no answer to this on the web, so hopefully Google will home in on this thread for all the poor folks going crazy trying to figure this out.
Problem:
Can't find repeat and shuffle buttons on iPod app in iPad.
Solution:
Shuffle and Repeat do not show up when playing podcasts (and perhaps some other media types). They do show up when playing music. Even though it affects podcasts, you have to play a song in order to change it.
So to adjust the settings when listening to podcasts you must:
1. Stop the podcast
2. Select Music from the Library on the left column
3. Start any song playing
4. Tap the album artwork under Now Playing in the left column
5. Tap the full screen album artwork to show the controls
6. Find the repeat and shuffle controls at opposite ends of the playing progress bar toward the top, and adjust as necessary
7. Navigate back to your podcasts and start the podcast again
Hope this helps everyone else from going crazy.
- Mark

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

I can not view ANY videos on Vimeo, I have 'reset' the Ipad, original IOS 5, cleared the history and cookies, I have changed the DNS number to 8.8.8.8, I have worked on this for 2 days and still can't find a fix, HELP!!

I can not view ANY videos on Vimeo, I have 'reset' the Ipad, original IOS 5, cleared the history and cookies, I haves changed the DNs number to 8.8.8.8, I have worked on this for 3 days now, HELP!!!!

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

IPad 1 Safari crashes frequently. I went to many Apple stores in different countries and each Apple staff member had their own different opinions with no help. I had upgraded my iOS to 5.1.1 and the Safari crashing started about one year

IPad 1 Safari crashes frequently. I went to many Apple stores in different countries and each Apple staff member had their own different opinions with no help. I had upgraded my iOS to 5.1.1 and the Safari crashing started about one year after the upgrade and some Apple staff blame this- but this started one year later after the iOS upgrade. Recently at the Apple Store in Vancouver an Apple staff reset my computer (erased everything and sent to iCloud to reset the iPad) and I hoped this would fix the problem. IPad Safari still crashes. Short of booking an appointment for taking it for repair to Apple technicians which will cost me money can anyone help me to fix this Safari crashing.

Hi,
You might have a 3rd party plugin that isn't compatible with Safari 4.0.4. Go here for help...
Safari add-ons can cause performance issues or other situations
If you are using a USB hub, try disconnecting and restarting with just your keyboard and mouse connected.
From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
from the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
Mac OS: Web Browser Quits Unexpectedly or Stops Responding
Also, you could download and install the 10.5.8 combo update (PowerPC) available here.
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
It contains fixes that might help. Then repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

IOS 5 - No repeat button and no shuffle button either

Similar Messages

Maybe you are looking for