IOS 5 not working iPad 2

I just updated my iPad 2 to IOS 5 and when I try to install apps it just says waiting and never downloads what do I do?!!

I found two temporarily solutions:
1. Leave the downloading over night; by morning it's completed
2. Leave it alone for 2 or 3 days; it'll start loading normally
I think it's a Apple server problem.

Similar Messages

  • Exchange 2013 Autodiscover Android IOS not working

    Hello,
    I configured exchange 2013 in my organization. Android, thunderbird and IOS not working with autodiscover.
    Windows Phone example Lumia worked with autodiscover correctly.
    All needed DNS entry and certificate are uploaded to Exchange.
    Test on https://testconnectivity.microsoft.com/  ended successfuly.
    Can Android and IOS supported autodiscover.
    BR/Lukas

    Yes i try  https://fqdn/Microsoft-Server-ActiveSync instead
    I have White page nothing else.
    IOS, Android work after manualy configured.   Windows Phone work with autodiscover wonderfully
    Ok we added public IP address to our CAS Server. Now from Internet i can login to /OWA or /ECP.
    What next to do? Change autodiscover.domain.com Record A to point NAT IP address CAS server?
    BR/Lukas

  • Camera not work ipad 4generation before ios8 update

    Camera not work ipad 4generation before ios8 update
    PLease help

    Hi Hellside,
    Welcome to Apple Support Communities.
    It sounds like there is an issue with the camera on your iPad. The article linked below has a lot of great troubleshooting suggestions for a similar issue on an iPhone but the suggestions should resolve the issue with your iPad too.
    iPhone: Hardware troubleshooting
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    I hope this helps.
    -Jason

  • IOS 6: iMessage not working (iPad 2)

    So I updated to iOS 6 (why on earth it needed 2.1 GB of free space I'll never know) this past Thursday. At first, I was really impressed.
    A promising future. Then things started to go downhill.
    I had to send a message (whenever I refer to a message, I mean through iMessage) to a friend about an assignment that our professor had given us. Well I made the text and went on to use something else. Only hours later, when I didn't get a response, did I see that it failed. I tried again and again for an hour and it did not work. And yes, I turned iMessage on and off, quit the application many times, and turned my iPad on and off. It wasn't the Internet connection, the connection was really good. So I have no idea what's going on.
    However, my iPhone 3GS has not had any problems with iMessage. It's on iOS 5. (I haven't updated it to 6 b/c it requires 2.2 GB of free space, as if I had that, and when I connected my iPad 2 to my computer, it won't sync. My computer is running on 10.5.8. So I can't get the latest iTunes, and therefore cannot sync my iPad).
    So has anyone found any way of fixing this? Apple needs to go back to the drawing board and figure out how to fix this.
    And then give everyone who updated a complimentary something and an update to fix the problem.
    I'm so glad I didn't buy the new iPhone 5. Wouldn't want that problem.

    I would do as what Diavovex suggested:
    Settings >>> General >>> Reset >>> Reset all Settings.
    Once you have completed this, ipad will reboot, connect again to your Wi-Fi and then try to Reset imessage again. Just make sure your Apple ID and password are ok ...... try log in to Apple Store and if this is not an issue then I don't see why imessage cannot connect?
    Azim

  • Ipad 3 camera shuttle is not working, ipad 3 camera shuttle is not working

    My ipad 3 camera is not working; the shuttle doesn't open - any ideas on how to resolve this problem?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • Will not:  rotate screen, camera will not work, iPad will not turn off, sound on side.

    Ipad will not turn off, sound button does not work, camera does not work,  screen will not rotate.  Have new ios and update.

    Reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings will be reset.

  • IPad App Store is not working, iPad App Store is not working

    My App Store stopped working today!! HELP!!

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • CWA using customized portal does not work IPAD 2

    Hi all,
    I have another interesting case that I have been testing for more than a month but it is not working. Cisco provides templates to create the customized portals for LWA or CWA. However, Success Page HTML does not work on LWA and Cisco ISE uses internal default success page.
    On my specific case, we need to move from LWA to CWA in order to minimize the number of redirections and the customized portal for login and AUP work fine BUT when the SUCCESS PAGE is presented on the IPAD, the button on the top right corner never changes from CANCEL to DONE even though the Authentication is successful. We modified multiple times the HTML Files following Cisco Templates and the following link (which looks like has an error) with the same incorrect behavior. Only works if I click the go back arrow on the IPAD so I move back to the AUP page (not an acceptable workaround).
    Reference Link:
    http://www.cisco.com/c/dam/en/us/td/docs/security/ise/how_to/HowTo-42-Customize_ISE12_Web_Portals.pdf
    In the link, Cisco mentions version 1.2.0.899 patch 8 as the version to be used on the ISE devices running the customized templates. However, we recently moved from 1.1.3.124 to 1.2.1.198 patch 3. I created a brand new VM running 1.2.1.198 patch 3, imported the cisco templates for login, AUP, success and error and I am still getting the same problem on IPAD 2 for SUCCESS PAGE even though I am using Cisco Templates.
    I could give a try configuring another VM running 1.2.0.899 patch 8 and use the Cisco templates + IPAD 2 but that is not a good solution.
    Have anyone experienced the same problem?
    thanks

    I opened a case with Cisco TAC, let's see what happens. In the meantime, I created a VM ISE which will be running 1.2.0.899 patch 8 so I will upload the Cisco HTML Files on it and see it this option works properly on IPAD 2, IPAD 4, Chromebook, Win 7 and Samsung Tablets.

  • Microphone not working iPad 2

    Hi,
    The solution to resolve the mike problem (e.g. the privacy settings) is not working for me and a few other users as far as I can see on this forum.
    Can't use FaceTime nor Skype anymore!
    Has anyone found another solution by any chance?
    Thx

    Pichkeopiseth-
    The iPad 2 has been out less than a year, so it is still under warranty.  Apple should repair or replace.  Whether they replace with a new or reconditioned unit, I can't say.
    For an out-of-warranty unit, an Apple Authorized Repair Center may be your best bet, since it is probably an easy repair.
    I suggest you verify that the problem exists in at least two Apps.  One I use is the free Skype App.  Skype has a test server you can call, that will record and play back your voice.
    If the microphone works sometimes but not others, try resetting (rebooting) the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart after a couple of minutes.  Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
    Fred

  • App search on iPad iOS not working, App search on iPad iOS not working

    Only had this one week, now unable to search in the App Store just getting white screen, the buffering Circle does it thing but just get white screen, WAS working fine till about 2 - 3 days ago, have tried reset and restart and signing in and out (only for say half hour)! Please please can apple or someone guide me in the right direction as its very very frustrating to say the least,

    Ragazzi anche io ho lo stesso problema.
    Ho attivato l'iTunes Match, che funziona correttamente sul pc e sull'iPhone 4S.
    L'ho attivato anche sul mio iPad, ma, tuttavia, dopo un breve periodo in cui ha funzionato correttamente, ha iniziato a dare problemi.
    Vi descrivo di seguito ciò che ho rilevato:
    - il periodo in cui l'iTunes Match ha funzionato correttamente sull'iPad è durato solo qualche settimana;
    - in seguito, anche se tutti i brani della Cloud venivano visualizzati sull'iPad, dava problemi nel senso che i brani non venivano riprodotti e, inoltre, la durata veniva indicata in "zero" per tutti i brani, sicchè, cliccandoci, non venivano riprodotti;
    - ho provato a disattivare e riattivare l'iTunes Match e, a questo punto il dispositivo ha dato il messaggio "tutta la tua libreria musicale verrà sostituita con quella su iTunes Match", mentre, nell'applicazione "MUSICA" erano spariti tutti i brani: veniva visualizzata, al centro della pagina, la nuovoletta del Cloud, con una barra di download sotto. Questo è durato per circa quattro giorni, senza che succedesse nulla, nel senso che la barra del download non mostrava segni di caricamento;
    - allora ho provato a ripristanare le impostazioni e, a questo punto, erano visualizzati di nuovo i brani, ma comunque senza possibilità di riprodurli (la durata di nuovo indicata come "zero");
    - nel momento in cui ho provato a cliccare su uno dei brani, è riapparsa la nuvoletta del Cloud con la barra di download sotto;
    - quando i brani ricompaiono, hanno sempre durata zero e non vengono riprodotti;
    - ho attivato anche la condivisione in famiglia ma il problema non cambia.
    Vi preciso che il mio iPad è della prima generazione ed è aggiornato all'IOS 6.

  • IOS 5 Safari not working (ipad 1)

    I have an AT&T iPad 1 and upgraded to iOS 5.
    After the OS upgrade, Safari will not load.  I open the app, it pops up on the screen but before I can select anything it closes to the home screen (whole process takes less than 1 second.)  From there it still shows as an active app, but selecting it from the multitasking tray has the same result.
    Any thoughts?

    Close Safari and Mail app on the Task Bar and re-launch.
    1. Double-click the Home button to reveal Task Bar
    2. Hold Safari and Mail app down for a second or two until you see the minus sign
    3. Tap the minus sign to close app
    4. Tap area above Task Bar to return to Home screen

  • Video mirroring not working iPad composite cable

    I have a brand new iPad 3 with iOS 5.1 and I can't get my video out over to my tv via my composite cable. It says device not supported when I plug it in but I've read in other forums to ignore that notification. When I attempt to play video it only plays on the iPad with no sound. Nothing is transferred to the tv. The composite cable works fine with my iPhone 4 running iOS 5. If anyone could provide help it would be greatly appreciated.

    iPad 1 is not capable of Mirroring, thorugh Airplay or otherwise..   You could perhaps Airplay from Apps with Video Output such as the videos App or the Photos App in slideshow mode.
    iOS: How to use AirPlay Mirroring
    http://support.apple.com/kb/HT5209
    To use AirPlay Mirroring, you will need the following:
    iPhone 4S (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)1

  • Push email not working iPad 4

    I'm trying without success to get push mail (Hotmail) working on an iPad 4 iOS 6.0.1
    All of the mail settings are correct. I have removed the account and added it again multiple times - using reset, hard reset and reset of network connections.
    The push service may then work for a few minutes or so but it stops working again.
    I have added known working Hotmail accounts and accounts that work with iPod on the same wifi connection but no joy. I have set up push email on Android devices - two over the Christmas period - with no problems at all.
    The only way I can receive new email on the iPad is by opening the email application. Email is not being pushed. It is as if the push email service is deactivated.
    I notice that iOS 6.0.1 does not allow me to enter the Exchange server settings for the Hotmail account manually. There is no option to enter col-m.homtail.com as the server. The iOS setup must be completing these details which are then invisible to the user and cannot be changed or even viewed. On an iPod (iOS 5) and Android I am able to set these "advanced" settings manually but not on the iPad.
    Is this a known problem? If so is there a workaround for it given that I have tried all of the obvious things above.
    I am still within the return period for the iPad and this is so disappointing and unacceptable that I feel like returning the device.
    I see from a search that quite a few people have had similar problems and some have not found a fix.
    Can anyone assist?

    I recently got an iPad and had the exact same problem! - except I'm using Gmail.
    I take it you are attempting to set it up through hotmail as you cannot see the Exchange server settings then?
    Well, seen as I couldn't get my gmail account to push emails, I set my gmail up with Exchange and have found that the option to enter the server is found later on, did you try entering the required fields in Exchange and proceeding to the next page of the setup?
    Settings > Mail, contacts, calendars > Add account > Exchange > enter your email address, password, and description > Then when you press next the server option should pop up where you can enter col-m.homtail.com, leave the domain blank, and re-write your email address in the username.
    I am using iPad 4 version 6.0.1 also and this worked for my Gmail.
    Hope you get it fixed!

  • Cisco ISE 1.2.1.198 Guest Portal Vlan Override at Mobile Device (android,IOS) not working

    Hi Guy, 
    In my ISE deployment, once the guest succcesful authenticated will be assign guest VLAN for internet access.
    we are using guest portal to do the vlan override once user authenticated.
    Window 7 Internet explorer (Active X), Chrome (Java Aplet) is working fine.
    but Android,Apple IOS devices unable to release the DHCP and get new DHCP.
    because from ISE and WLC we can see the Vlan have change, how mobile devices initiate dhcp release for Guest Portal
    Kindly advice.
    Regards
    Freemen

    I don't have such documentation nor I could find any on Cisco's site. With that being said, it doesn't mean that it doesn't exist. I just know that Active X is windows specific framework and Java is not supported on either iOS nor Android:
    http://www.java.com/en/download/faq/java_mobile.xml
    The good news is that Cisco appears to be steering away from Java so it is possible that in the future this will be supported. 
    Hope this helps!
    Thank you for rating helpful posts!

  • Photo stream not working iPad to iPhone

    Pics that are saved in my photo stream on my iPad don't show up on my iPhone. It used to work fine, but recently my iPhone just turned off all iCloud settings by itself (another issue), now it won't transfer iPad to iPhone. Pics transfer from iPhone to iPad fine.

    If photos taken on your iPad appear in the my photo stream album on your iPad, they are successfully being added to photo stream.  If they don't, save the photo stream photos to your camera roll, then turn photo stream off and back on.  (Note: photo stream photos are uploaded when you are connected to wifi with the camera app closed and have at least 20% battery life remaining.)
    If they are being added to photo stream on your iPad, but do not appear in the my photo stream album on your phone, save the photo stream photos on your phone to your camera roll, then turn photo stream off and back on.  Test photo stream again.

Maybe you are looking for

  • Need advice about certification: do J2SE 1.4 or wait for 1.5 to go out?

    I need advice here! I am studing for Java Programmer certification (310-035) and I know now that the certification does not have any expiration date, instead it's version based. So, if I get now a J2SE 1.4 certification, soon it will be outdated... I

  • Update 2 fields in 1 table

    I need to update an Oracle 8i database. I need to update 2 fields in 1 table with about 2,000 rows of data. Right now the date is stored in an Excell file in columns A and B. I need Something like: Update Table1 set field1 with value from A:1, set fi

  • How do i change account names and password on an existing device

    i need to change from a existing 4s to a 5s. the 5s was my son's and need to change the icloud info to mine.

  • Print Problems with 3600n printer

    I am having problems printing certificates with a 3600n color laserjet printer.  The certificate blanks are cardstock thickness and have a foil emblem embossed on the upper portion of the certificate.  When I print a certificate out, I often get a re

  • Error when running DSA transaction

    Dear Experts, I just updated service definition on the satellite based on note 727998 and run DSA to get the EWA report, however the following error showed up: - Value check errors in some tables ( 2). Loss of Data Message no. DSVAS331 Diagnosis Tran