IOS 5 problems - Voicemail/Missed and dropped calls

I'm using the Iphone 4 and recently updated to the IOS 5.  I have not had any issues with the iphone prior to the update.  Now I experience calls going directly to voicemail without ringing.  I have numerous dropped calls.  When I try to get the voicemail it dials the voicemail as opposed to the voicemail playlist that normally comes up (I eventually get access to the playlist after up to 20 minutes after a call is received).  Any help, answers?

I'm having the same issue but I have the 4s and I'm on Verizon. Sometimes the VM won't even come in until I shut the phone off and power on again.
If you find out what it is let me know! I'll post this question again, too.

Similar Messages

  • Problems with answering and making calls

    I have owned a Droid 2 for almost a year now. I love it! But for the last few months I have had a problem with answering and making calls. Sometimes when I answer a phone call it connects like I have answered the call but I can't hear anything and the other person can't hear me. The call says I am connected and I can see the timer going but there is no communication. It does the same thing when I go to make calls sometimes. I can hit send and it connects the call but I can't hear anything. The timer is going and the other person answers but I can't hear anything. The only reason I know they answered is because they then call me back and leave a voicemail, sounding very confused. I have to restart my phone and then the problem is solved. But only for a little bit. I haven't been able to pick out a pattern or anything. It is random and very frustrating. I went into my local Verizon store about the issue and they arranged for me to receive a new, certified pre-owned phone because I pay insurance on my phone. I received the phone the next day and everything went great, for a few days. But this phone is also having the same problem. I am getting very frustrated with this because I need to be able to actually talk to people when they call me. Anyone else having the same problem? I want to go back to the store but I feel like they wouldn't do anything more than they did last time, which didn't solve the problem.

    I have this same issue on a bi-daily basis: I can place a call, but then I hear nothing.  I can answer a call, but I then hear nothing.  The calls connect as the people I am in contact with will tell me they answered my calls and heard me, though I could not hear them - and vice versa.  Also, this phone does not like to place a call using the "call" option if dialing from "recent calls".  I turn this phone on/ off daily, I've taken the battery out on about 50% of the occassions when this issue has happened.  This has been a problem for me for approximately 1yr.  My early renew date is just shy of 2 months from now and I cannot wait to get rid of this phone.  Aside from having great difficulty making/ receiving calls, the phone is overall slow to respond to basic functions like text messaging or using the camera.  Also, most times while taking a picture, the camera will "take a picture" but then there is no image in the file.  Highly annoying - the only way to temporarily fix this is to reboot - but like the call issue, the problem recurs.  I do have a bunch of apps on installed on the phone, but since I also have an APP killer on the phone, nothing aside from "Weather Bug" app is ever really running in the background that would slow this phone.  BUT, right now my main concern is may safety: God forbid I am ever in danger or in an emergency situation, this phone's constant malfunctioning could possibly be the physical harm or death of me.  I hope that my family can sue the company that provides the software for this phone, Verizon & Motorola in the event of my untimely death.

  • Problem with Drag and drop in panel dashboard

    Hi
    I am having problem with drag and drop in panel dashboard.
    I will explain what i am doing.
    I am using Oracle three column template in First region i am having a table that showing all customer.
    I drag one record from my table and drop it on customer info (CIF) page on second region it is working fine.
    my CIF page has a dashboard with 6 panel box. i am showing 6 different jsff in 6 panel box.
    I put drop target in each jsff
    <af:dropTarget dropListener="#{backingBeanScope.backing_customerinformation.handleItemDrop}"
    actions="COPY">
    <af:dataFlavor flavorClass="org.apache.myfaces.trinidad.model.RowKeySet"
    discriminant="CustomerSearchDnD"/>
    </af:dropTarget>
    when i put drop target my panel boxes moves only when i drag it to another panel box header not entire part of panel box.
    if i remove the drop target then panel box move normally as the example given on: [http://adfui.us.oracle.com:7778/faces-trunk/faces/visualDesigns/dashboard.jspx?_afrLoop=2021391022520156&_afrWindowMode=0&_afrWindowId=null] but in taht case i am not able to drag and drop my data

    You must be an Oracle employee as you're referring to a component in the upcoming JDeveloper version which has yet been released to the general public. Oracle employee's are, I believe, directed to post on internal Oracle forums.
    CM.

  • Is anybody having drop-out and dropped call issues?

    hi
    i'm on my second 8gig iphone and am still having (after 2days) horrible drop-outs on almost every call and dropped calls. the signal is showing full strenght-4bars while this is happening. any ideas? my previous cell (blackberry on att) had perfect reception at all times at same location. drove through the neighborhood this afternoon and same thing. i areas where i used to get perfect reception i now get drop-outs.
    thx,
    mk

    you are correct - hence my previous post that my att reception on my previous phone - a blackberry in exact same locations - was perfect. on the other hand i think this must be an isolated incident of bad luck receiving 2 phones in a row that have bad reception. i met at least 10 people at the apple store on friday night that live in my area (within 1/2 mile) and nobody has complained (so far) about reception issues and dropped calls.
    mk

  • Not showing missed calls and dropping calls

    I have had a Thunderbolt for several months now and I have had a problem with missed calls not showing up and voice mail showing up with missed calls, I have talked to tech and reported  this and I received a refurbished phone and still have the same problem any know issues with this?

    Hi bbarront,
    I apologize for the delayed response and its unfortunate you are still missing calls with the replacement device.  Can you please advise if you have taken advantage of the newest Software Update? Additionally, are you advising that you don't receive a notification of a missed call and the only way you realize it is when you check your voicemail?  I look forward to hearing from you soon.
    Thank you for your involvement in our community forums,

  • 4.3.2 iPhone upgrade and dropped calls.

    Since upgrading to the 4.3.2 OS three days ago, I've been experiencing numerous dropped calls on the order of one every minute.  Calls linger in limbo before connecting and then drop.  Antena signal reads 3 bars.  I'm missing calls too.  I live in the same area and have NEVER had a problem with dropped calls until this update and it is really causing problems.  Why?  Is the phone failing?  Is this an update problem?  Is this a network problem?  Is anyone else experiencing this?

    I am experiencing the same issue here in Germany, Network is T-Mobile.
    Since upgrade to 4.3.2 I have dropped calls regularly with my iPhone4!!
    This is getting more and more annoying.
    What happens is: I am starting a call or am receiving a call. The call stays up for 1-5 minutes. During that time (randomly differs from 30 seconds to 5 minutes) all of a sudden the person on the other side does not hear me anymore! I am still able to hear him/her! After around 5-10 seconds after that happening, the connection is lost/cancelled. This is happening independently of the amount of bars, meaning it does not matter whether I am having 5, 3 or just one bar.
    Please Apple solve this!! I cannot use my phone anymore the way it is supposed to work! Never had this issue before the upgrade in the same places - in fact, before the upgrade, I did not experience ANY dropped call whatsoever!!
    BTW: I tried reboot, reset of all settings, backup, etc. - no positive effect.

  • Problem with checkbox and drop down menu

    I am using DW8 with PHP/MySQL.
    I made a insertion form and a couple of the fields are
    checkboxes and another is a drop down menu. Everything works fine,
    however, when I create an update form and the recordset calls the
    data it doesn't retain its values on those items.
    For example, if I checked a box when inserting the record and
    then call the data up for the update form, the box is not checked,
    making the user believe it was never checked in the first place.
    The same thing goes for the drop down menu. If I have 3
    options in the menu and someone selects the third one, when the
    update form is used it defaults to the first option automatically
    instead of actually calling up the original value selected.

    The fact that two scripts do not work together does not mean
    there is a bug in the RH script. It is simply that they were not
    designed by their respective developers to work together. This
    happens with multiple scripts in any html file.
    Try creating a new project and then importing just this topic
    into it. Does it still have the problem?

  • When is apple going to fix the "no service" and dropping calls on iPhone 4s?

    My iPhone 4s keeps losing signal dropping calls and displaying no service when is apple goin to fix these issues what ever about a weak battery I think these other issues are far more important

    MarcH4s wrote:
    My iPhone 4s keeps losing signal dropping calls and displaying no service when is apple goin to fix these issues what ever about a weak battery I think these other issues are far more important
    Since you said MY IPHONE the answer is that Apple is never going to fix it unless you call them or take it to a store for diagnosis. MY IPHONE has none of these problems. And it doesn't have a battery problem either.

  • 1.1.3 and dropped calls: Less mW (milliwatts)?

    I've continued to wonder about what could be causing my dropped calls in the same spots along I-84, and a "No Service" showing up at my house when before I had 3 bars.
    The number one gripe anyone has ever had about the iPhone since day 1 is it's battery performance.
    If Apple decided to reduce the overall mW transmit strength in favor of reduced battery consumption, this would entirely explain why calls continue to show on the display as still being connected because the phone is still getting a good RX signal from the tower, while the TX drops out trying to unsuccessfully re-establish the connection.
    The person on the other end of the call will often say they lost me at a certain point in a conversation about 1 minute after the call drops. Which of course means I have to repeat everything I said for a minute's worth of a dropped call. Hello annoying!
    Are there any benchtesters out there with the right kind of equipment to compare 1.1.2 mW transmit strength vs. 1.1.3 mW transmit strength with an established call to the same number from the same location?

    Ok I am sitting in the basement with 2 friends watching football. They both have
    4 bars and I have 1or none. All 3 phones are 3Gs phones about a week old or less.
    I showed them redlaser and they both tried to get it from the app store but couldn't.
    The message was they needed to update their software. They had not synced their phones
    yet and I had! So did 3.1.2 make my reception worse. 3.1 sure screwed up my old phone.
    The Apple ads making fun of Microsoft aren't as funny as they once were.....seems Apple
    has it's own problems to me.

  • Problem with drag and drop on Mac

    Hi, when I run my AIR application on Windows, I'm able to do
    the drag and drop.
    But when I run the application on Mac, it gave me an
    allocation error: unable to allocate region of size <random
    number> after I drag and drop thrice.
    Anybody knows what's the reason?

    Pages does not support the Apple font used for color emoji, so that behavior is normal.
    With what app are you reading the yahoo mail?  There is really no guarantee than any other email service will show the special Apple font involved.
    You should have no problem putting emoji directly into Mail or Text edit via drag drop from the Character Viewer as shown below.
    You should also be able to upload graphics here easily by clicking on the camera icon.  My email is tom at bluesky dot org.

  • Problem with Drag and drop manager

    I am noticing that the sample provided at
    http://livedocs.adobe.com/flex/3/html/help.html?content=dragdrop_7.html is not working when tried on any version of FireFox browser on a Mac OS version 10.6.3.
    So my understanding is that there seems to be some problem with the drag and drop manager in Flex when used on Firefox on a Mac OS version 10.6.3.
    It will be very helpful if you can provide any work around for this issue. We want to implement the drag and drop feature in a website that we are building for one of our clients.

    You must be an Oracle employee as you're referring to a component in the upcoming JDeveloper version which has yet been released to the general public. Oracle employee's are, I believe, directed to post on internal Oracle forums.
    CM.

  • Problem with drag and drop

    Hi! I'm having a problem with getting this code working, basically I want to drag and drop two things onto another the things dissapear then it moves onto a new page, the first item works properly but then the second item wont dissapear and remains stuck to the cursor. Heres the code I'd be greatful of any help.
    import flash.events.MouseEvent;
    import fl.motion.MotionEvent;
    stop();
    Back6_btn.addEventListener(MouseEvent.CLICK, onBack6Click)
    function onBack6Click(event:MouseEvent):void{
        gotoAndPlay("Bedroom2");
        Forward6_btn.addEventListener(MouseEvent.CLICK, onForward6Click)
    function onForward6Click(event:MouseEvent):void{
        gotoAndPlay('Brother bit');
    var inGran:Number=0;
    Gin.addEventListener(MouseEvent.MOUSE_DOWN, dragOn);
    Tonic.addEventListener(MouseEvent.MOUSE_DOWN, dragOn);
    function dragOn(event:MouseEvent):void {
        event.target.startDrag(false);
        stage.addEventListener(MouseEvent.MOUSE_UP, dragOff);
    function dragOff(event:MouseEvent):void {
        event.target.stopDrag();
        if (event.target.dropTarget!=null&&event.target.dropTarget.parent==Gran) {
            event.target.visible=false;
            inGran++;
        stage.removeEventListener(MouseEvent.MOUSE_UP, dragOff);
    function checkPage(e:Event):void {
        if (inGran==2) {
            gotoAndPlay("Bedroom1");

    you have some mismatched brackets, change your target properties to currentTarget (and i'm not sure you're dropping onto the correct target) but, try:
    import flash.events.MouseEvent;
    import fl.motion.MotionEvent;
    stop();
    Back6_btn.addEventListener(MouseEvent.CLICK, onBack6Click)
    function onBack6Click(event:MouseEvent):void{
        gotoAndPlay("Bedroom2");
        Forward6_btn.addEventListener(MouseEvent.CLICK, onForward6Click)
    function onForward6Click(event:MouseEvent):void{
        gotoAndPlay('Brother bit');
    var inGran:Number=0;
    Gin.addEventListener(MouseEvent.MOUSE_DOWN, dragOn);
    Tonic.addEventListener(MouseEvent.MOUSE_DOWN, dragOn);
    function dragOn(event:MouseEvent):void {
    event.currentTarget.parent.addChild(event.currentTarget);
        event.target.startDrag(false);
        stage.addEventListener(MouseEvent.MOUSE_UP, dragOff);
    function dragOff(event:MouseEvent):void {
        event.target.stopDrag();
        if (event.target.dropTarget!=null&&event.target.dropTarget.parent==Gran) {
            event.target.visible=false;
            inGran++;
        stage.removeEventListener(MouseEvent.MOUSE_UP, dragOff);
    function checkPage(e:Event):void {
        if (inGran==2) {
            gotoAndPlay("Bedroom1");

  • Facing problem in placing and receiving calls in l...

    Bought my lumia 720 a week ago. For past two days, i am facing problems during calls. Most of the my voice isn't audible to the receiver. It's happening during incoming calls and outgoing calls both. Its freakishly frustarting. Pls help me out.
    Note: I am able to hear the voice of the caller clearly.
    Thanks,
    Adnan

    I purchased Nokia Lumia 720 a week ago. Since than, I am facing sound fade problem while making call. The dstination number can hear my voice clearly, but I hear the voice getting **bleep**. Seems there is something extra noise.I tried with another network sim, but same result. The problem is persist even I change the sim. I can't hear the other party voice clearly .. Please help to fix the issue.. I've purchased from nokia care and have warranty card for 1 year. Thanks

  • Problem with Drag and Drop on a JTree

    I would like to have a JTree with drag and drop support with the following characteristics:
    1) The JTree holds near 100 different kinds of TreeNodes
    2) The drag and drop operation uses TreeNodes as Transferable
    3) The drop operation adds a new TreeNode child on the TreeNode that accepts the drop
    4) There are some rules for a TreeNode to accept the drops by example:
         Type1 can accept Type2
         Type2 can accept Type3
         All other combinations are not allowed
    I am using the following classes to support this behavior
    JTree
    DataFlavor
    DragSourceListener
    DropTarget
    DropTargeListener
    DragSource
    GestureListener
    Transferable
    The question is:
    How to change the cursor shape when the mouse is over a node to show graphically the drop accepting rules.?
    I can not use the the following methods to change the cursor-shape
    DropTargetListener.dragEnter
    And
    DropTargetListener.dragOver
    Case they receive a DropTargetDragEvent witch don�t knows nothing about the TreeNode type dragged.
    I can not create a TreeNode on the method GestureListener.dragGestureRecognized cause this could not work when dragging between two diffents JVM.

    Hello,
    You might want to search this forum for this class : DNDTree.java. It pretty much does the job.

  • IOS 7 problems with FaceTime and messages apps.

    Need resolution on why FaceTime and message apps are not accepting my password after loading ios 7.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
     Cheers, Tom

Maybe you are looking for

  • Turn on home sharing won't work to watch home movies on Apple TV

    I have Apple TV 3rd generation.  I transferred home movies from my MAC to my Apple TV.  I have gone to Apple TV and then Computers and clicked it and there are my home movies.  Many times however a message appears to "Turn on my Home Sharing".  So I

  • NET8 timeout with ODBC Gateway

    Local: Database: Oracle XE 11gR2 Oracle ODBC Gateway 11g Windows 7 Sybase SQL Anyhwere 12 client Remote: Database: Sybase SQL Anywhere 10 Windows Server 2008 R2 ==================== SQL: select * from mytable@dblink: Error returned: ERROR at line 1:

  • Original music lost

    My original music has been lost on a back up hard drive.(stupid Western Digital - never again)   How do I copy the music from my iPhones/iPods back into iTunes?  Not many were purchased from iTunes, most were from CD's.  Because now when I sync it -

  • Guitar Hero 3 - stutters and crackl

    Hiya all. I'm currently using driver 6.0..24 (the one that DriverExpires showed how to extract on his website). In the past, sound really hasn't been a big deal for me - I have it on lightly when playing games, and for listening to youtube videos and

  • Uploading of document in salesorder

    Hi, Is it possible to upload some txt file to a salesorder through some function module or BAPI? If yes please let me know the name of that function module/Bapi. Thanks.