IOS 5 Sound Quality and Sound Check issues

So since upgrading my iPod to iOS 5 the sound quality of my music has deteriorated massively and sound check no longer works as it should.
Tracks sound crackly and audio volume will remain balanced for a few tracks when sound check is on, then all of a sudden become completely unbalanced and all over the place. My iPod is only just about useable, it's a bit of a disaster that its main feature doesn't work as it should.
Everything else in my iOS5 works as it should.
Any help would be greatly appreciated.
Richard.

Since I bought iPhone4 and listened my songs with "Ipod app" and external speakears I was amazed how brilliant, sharp, intense, clear, perfect bass, perfect trebble the sound was, there was no distortions or saturations ever... The sound quality was just PERFECT with the equalization OFF!!! Not remember if I had SoundCheck ON before but now it doesn't make any difference. I installed iOS 5 over 4.3.1 or so and now sound is just more like noise compared to iOS 4, I have selected all presets or equalizations but ALL are poor, maybe some presets work better with some songs but still they are poor.... Songs did not have clarity!! The volume force was like degraded, now I have to set higher volume to produce same force than before with less volume... iOS 5 max volume (100%) is like iOS 4.2.1 85-90% of volume. Difference is that iOS 5 maximum volume starts slightly to distort or saturate audio quality... before with iOS 4 sound quality was Crystal Clear even with max volume!!! In short SOUND QUALITY is DEGRADED... or perhaps I'm a very critical and nonconformist guy in terms of audio quality... this kind of degradation is quite notorious when one loves music!! or is there some other configuration I'm missing here??
Totally agree with Richard!!
At first I thought it was a problem with my phone... I used to believe iOS 5 was engineered for new iPhone 4S hardware and since it is shipped with dual-core processor, I thought my phone was short in resources!!!
Why max volume is lower in intensity???
Why equalization with the EQ Off changed?? All my songs were stored on iTunes, they must have same sound quality properties as they were when first ripped..
I hope Apple enginneers did not sacrifice volume output force in favor of saving some battery, because normally we charge battery when listening music at home with our personal speakers equipment.
I would like to understand the reasons why the new "Music App" was "changed", and why these changes have to go backwards!! That is sad... because for iPhone or iPod lovers music was always important.
thanks

Similar Messages

I'm having trouble with my sound up and sound down keys. They're doing other functions. This is only a new thing.

I'm having trouble with my 'sound up' and 'sound down' keys. They're doing other functions. This is only a relatively new thing.

You didn't mention what those "other functions" were. That might help!
First thing to check is System Preferences > Keyboard > Keyboard tab - make sure "Use all F1, F2, etc. keys as standard function keys" is un-checked. Hopefully that still works in Mountain Lion.

Hey you all, I have recently updated me iPhone 5 to iOS 7.1 and I checked my reminders built in app, and it seems like everything I had in there was lost. I have tried many things, but none seems to work. I can no longer add in any remainders.

Hey you all, I have recently updated me iPhone 5 to iOS 7.1 and I checked my reminders built in app, and it seems like everything I had in there was lost. I have tried many things, but none seems to work. I can no longer add in any remainders.

Have you failed to regularly backup the device to iTunes or iCloud? If so, the data is gone.
If there are backups, restore the most current one from prior to the data disappearing.

Why is the sound quality and volume in itunes so different than when I use other media players

This is an issue which has been vexing me for some time. I've researched it all over the web and have not found a worthwhile answer. Some other posts on these forums have asked similar questions without successful answers. But, none the less, I will try...
I have spent a lot of time over the last two years trying to get my itunes library organized as well as getting good digitized versions from my vinyl records as well as CDs. I was pleased with my results and then I added the songs to itunes. I could not believe how inconsistent the sound quality was. Invariably the volume is always lower. [Please do not post a reply such as: Check the volume controls in itunes proper as well as in itunes preferences (i.e., Sound Check, Sound Enhancer) & the Volume Adjustment in the Information pane under Options for particular songs.] I tried all of those means of adjusting volume. They do NOT work.
There is something more insidious at work in itunes which prevent good sound reproduction. I will give an example. I have played Frankie Valle and the Four Season's song "C'Mon Marianne" on the OS X system sound (i.e. clicking the play button to the song file when selected on the desktop or wherever it resides) as well as in Amadeus Pro. The song sounds great. When I play it when it's in the itunes' library the first part of the song is too lound and then when Frankie Valle starts singing his voice is at a significantly reduced volume.
I have edited the foregoing song in Amadeus Pro to a very high volume (i.e., Effects>Amplify), reloaded it into itunes and it still does not inprove the volume of Frankie's voice in the song, even though the rest of the song is somewhat louder. I have played with the Equalizer in itunes to no effect. It just does not work.
Now, I would glading move away from itunes and use another media player. However, I have other Apple devices through which I listen to music. And the only way I know of to listen,e.g., on the iphone is through itunes.
The other related problem with itune, or should I say iCloud, is icloud match. The icloud Match has taken great sounding music and given me back music of an inferior quality, even though it is a Matched AAC format.
I'm am sorry if I am a little peeved about this issue. If anyone has some suggestions or input to a solution, I will be eternally grateful. Thanks a bunch.

fbuerg,
You are welcome. Glad my good fortune was helpful to you.
Time Keeper

Poor sound quality and distortion

Ever since getting my 27" Imac I've notice the sound quality is poor and bass sounds distort quite a bit and it happens with the computer's speaker, headphones, and streamed audio over the network.
Any ideas on what might be causing this? Sound card or itunes?
Thanks,
Terry

Sounds like an audio circuit issue on your logic board--especially if it does it using headphones too. That almost eliminated the speakers. I would contact Apple and get it looked at.
Dave M.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

IOS 6 notification and sound sync

I am having an issue where the banner notification and sound are not in sync. So the banner will flash on the top of the screen and then I will hear the notification tone. This can be very annoying when the phone is in my pocket - I will look t it when I hear the notification tone but will have missed the banner notification so often times don't know what the notification was for. Any assistance would be greatly appreciated. I am running iOS 6 on my 4s. Thanks.

NattyNoodle
Re: IOS 6 Notification sound not working!! Sep 28, 2012 11:25 AM (in response to keith-gauci)
I've had exactly the same problem! Also the silent button on the side isnt working either. Calls seem to be ok, but emails sms facebook, none of those sounds work. Have you found a solution?
No I haven't. The difference is that my silent button is working and even sound when receving and email or an sms's. My issue is the sound of the notification of the applications. For example facebook, F1Live24 ..

Sound quality and adjustment

I have a model 32C110U TV and am experiencing poor sound quality (very tinny sounding). I have tried to adjust the audio quality in the sound menu but I cannot detect any change in the various settings that I have made, i.e. if I adjust the bass and(or) treble there is no audible change in the level.
Does anyone have help for this issue?

There is now a fix for this problem you can search for 32C110SNDKT in the top right corner, there is a bulletin that was issued on 10/6/11
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/outFrm.jsp?ofId=AskIris&searchString=32C110U&x=9...
I am still trying to find out more and called in since I cannot actually read the bulletin since I am a consumer. So far I have found out that it is not a firmware update but a part repair.
Part Number 32C110SNDKT
Description Inst2011-21
2 Pc Of 75027156 Kit
Part Number 75027156
Description Spacer Jk-1105 Form+p297 (Tj32) L133mm
If any one else finds anything out please post back.

GD580, its sound quality and its specs

I bought the GD580, and found, to my utmost annoyance: the sound quality is way below my cheapo Panasonic micro system. You know what: I paid USD250 for the GD580 and the same for my micro system.
At one point, I thought that because the GD580 included a decoder, it would enrich my sound if I toured the sound from my system through it to the Creative speakers, using the optical cable. Plainly wrong. Bad speakers or bad amplifier, or bad decoder, or all of those reasons.
Believe me, the sound from GD580 is no way as full as the sound from my system:
- Bass is OK, until you turn up the volume, and it's not bass anymore. I would not call it music.
- Lower Medium is OK,
- Higher Medium and Treble are where my little system would give the GD580 a run for its money!!! It's no way as full as I would have expected. Poor me, wrong decision.
Creative has been well known for its speakers and amplifier, I believed, so I was looking for reasons in the decoder itself. Hey, the website lists virtually no useful info. on the decoder specs. I was wondering if it's the same quality part as used in the stand alone decoder DST-100?
My little system states: they use a 24 bit / 92kHz DAC (digital to analog converter). The Audigy 4 uses a DAC of the same specs. Does anyone know if the decoder in GD580 uses that kind of part? Or just because the GD580 uses a 6 bit / 44.kHz DAC, sound quality is inferior to an average system?
What ever the result, I must say: stay away from this GD580. Anyone has any suggestion for a better system? Further info: I use it in an environment no larger than 5 sqm.
Thanks for reading this lengthy message to its end. But I was frustrated indeed.

Hi softiam,
One thing to note on the MacBook Air, is that it has only one speaker. Unlike all the other Apple portables, there is only one speaker (located in the area of the return, shift, question mark, apostrophe keys).
With mono, versus stereo, sound the quality will sound different but it certainly shouldn't sound washed out. What are you listening to, something through iTunes?
What are you doing on the machine when the fan ramps up? How are you using the machine, is it on your lap, on a desk? What applications are you running?

Sound quality and coolers on Macbook Air

Hello everyone ...I just bought a macbook air (1.86GHz, 128 SSD...) and I'm quite disappointed by its sound quality .... when I pull up the volume it sounds like worn-out speaker. My old macbook white sounds much much better .
Also it's getting hot and the cooler makes disturbing noise like a desktop machine all the time not only when I run applications. Is this common for all the macbook air(s) or I just need to take him to the doctor ?

Hi softiam,
One thing to note on the MacBook Air, is that it has only one speaker. Unlike all the other Apple portables, there is only one speaker (located in the area of the return, shift, question mark, apostrophe keys).
With mono, versus stereo, sound the quality will sound different but it certainly shouldn't sound washed out. What are you listening to, something through iTunes?
What are you doing on the machine when the fan ramps up? How are you using the machine, is it on your lap, on a desk? What applications are you running?

6th gen Nano: Sound quality and updates?

So I'm looking at possibly getting a 6G nano, couple questions. How is the sound quality? I recently bought a pair of $75 headphones and was very pleased with the them listening on my ipod touch 2nd gen, not so much on my 2nd gen shuffle. Can anyone compare the sound quality of the 6th gen nano to the 2nd gen ipod touch, or even the 2nd gen shuffle?
One feature that may keep me from buying this is the fact that it automatically sleeps after 60 seconds and there is no way to change this. So you have to wake the thing after every 60 seconds, which would be very annoying, especially if you are on a bike. Can/will apple do an update via itunes to add the ability to change these settings? For example the ipod touch has options to sleep after 1,2,3,4,5 minutes and never sleep. Thanks.

I think the sound is really good for such a small device. I don't notice much of a difference between the 6g nano and my 2nd gen touch. I do use better headphones. For exercise I use some sennheisers and also have a $200 pair of Dr Dre monster head phones that sound great! I do have the soundcheck turned on to even out volume levels between tracks.
I biked today with it clipped the left shoulder of my shirt. Yes...you have to hit the wake button to turn on the screen before you can hit the forward to next track button. Not too hard to get used to once you do it a few times. I do wish there was a way to keep the screen turned on ...maybe in a future firmware upgrade.

Nokia N73 Sound Quality and Stereo Speakers

Hi all,
Nokia N73 has two speakers on the top side and a speaker at the bottom side. It seems that only one the speakers on the top is working. Is this normal?
Also the MP3 sound quality is not very good comparing to Nokia N80 or Sonyericsson K750i. Any opinions about this?

The two speakers must work, but to know if thay work, can´t be like that... seems not... If You have serious doubts, go to a Nokia Service.
About mp3 quality, I don´t note nothing different from N70, N80... Is good quality to my hears!

Nokia N95 sound quality and DAC

[IMG]http://www.cnet.com.au/cnet/i/r/2006/mobilephones/22130769/sc003.jpg[/IMG]
Hi
Ive been searching everywhere including Nokia for info and was pointed to this forum! ->
Does anyone know any specifics regarding the nokia N95's Sound Quality??
Specifically:
1. The DAC used in the N95 build?
2. The SQ Differences between the N95 and N91 (build and technical)?
3. The sort of amplification used in the N95?
4. How the amplification (if any) runs through the 3.5mm jack?
5. A comparison to the SQ of a staple player e.g IPOD?
6. Is there a possibility for lineout? (purely a query)
Any help here would be most appreciated !!

Here is the official Nseries specs bout music:
Music Features
• Digital music player - supports MP3/AAC/AAC+/eAAC+/WMA/M4A with playlists and equalizer.
• Integrated handsfree speaker
• OMA DRM 2.0 support for music
• Stereo FM radio (87.5-108MHz /76-90MHz) with Visual Radio support
And I also learnt it has 8 band equalizer.N91 has a special music chip [forgotten who has made it] that was created to beat specially IPOD.Now IPOD has been redesigned but sound still sucks.
Already iREAVER, ZEN has beaten ipod.
I saw a tendency that whoever own this model barely [includin me] support this as best.
But its only upto nokia to keep it still best even after N95 released or not.
Instead can make another model over or as successor.
Plus, I donk think so mainly because y know HDD expansion is easier than SD MMC systems.
And play videos and songs better.
I am sorry that I could not give y a more depth technical feature.
But the fact is IT IS A MUSIC CHEAP ON WHICH LEADIN MUSIC COMPANIES GREATLY RELY ON.
And for nokia it is not impossible to make slightly inferior or superior to N91 Like sound machine and eventually all [music] phone will have this GOOD sound quality as standard....just a thought.
Hope y understand wat I mean.

Reduced sound quality in sound recording

I have a Z1 and the camera films with great sound quality but the sound recorder sounds horrible, how can I solve this?
Thank you for helping

have you tested other apps? I don't know if this settings will apply to sound recording
settings > call settings > microphone noise suppression
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Measure sound power and sound intensity with NI USB-9233

Dear,
I'm new to Labview and I have a question. A few weeks ago, we have bought a CompactDAQ system with among other things a USB-9233 card.
Now I have found out it's also possible to do sound measurements with this card.
I would like to do sound intensity measurements and sound power calculations. Is it possible?
I have LV 7.0 and the Sound and Vibration Toolset for LV. Do I need additional hardware and/or software?
We currently have B&K microphones and a B&K sound intensity probe. Can I use them with the 9233 card?
Or do we need to buy new equipment?
Thanks in advance,
Ronny C

The USB-9233 only works with pre-polarized microphones.   This means that the ICP (IEPE or Deltatron as B&K calls it) is always enabled.   IThe sound intensity probe you have probably requires a 200V power supply.   We have a new module coming out soon (January 2008) called the NI 9234 that offers options to enable/disable the ICP as well as AC/DC coupling and 51.2 kS/s sampling rate.
With this you could use your sound intensity probe with this module if you had a precision power supply.   It will also work with our other dynamic signal acquisition producuts like the NI 446X, NI 4472, and NI 449X that allow you to turn-off ICP.   You can use the 9233 with a GRAS sound intensity probe that has ICP type microphones.
In addition, one of the GRAS designers gave a presentation at NI Week on making Sound Intensity measurements with LabVIEW that I can send to you.   They are going to offer the code to interested users and we will post it on our web site.    In addition they plan to implement a multi channel version for vector intensity with our higher channel count products.
You would need to have the Sound and Vibration toolkit or Measurement Suite with LabVIEW 8.X for optimal results.   The latest version of the Sound and Vibration toolkit just released in December with additional features including the Sound and Vibration Assistant, human vibration filters, and more Express VIs.
Kurt Veggeberg
Business Development Manager, Sound and Vibration
[email protected]

How do you use your sound card and sound VI to get sound levels off a microphone.

We are using LabVIEW 5.0 and we want to capture sound from a microphone. Is the sound VI and a sound card enough to do it, or do you have to get more materials.

If you are in Microsoft Windows platform, you can just record the sound with the sound recording feature of windows.
You can do the same with LabVIEW, but it actually a little more difficult, though you do have more flexibility.
Try looking at your sound examples included with LabVIEW. There should be a few examples on how to acquire audio that may be exactly what you are looking for (always look at the examples, they cover the gammit of LabVIEW capabilities and are a great way to solve something to which the answer is not immediately availabe. I don't know of any other software package out there that provides this kind of sample program database.)

IOS 5 Sound Quality and Sound Check issues

Similar Messages

Maybe you are looking for