IOS 5 update for iPad 2 not working?? HELP!

I have been attempting to do the iOS 5 update for my iPad 2 for the past couple of weeks. Every single time I try and update it, it will be almost complete and then say network connection error. I thought maybe my internet was not working properly but have tried at a few other places with a different wi-fi conncection. I even did it at someones house where they succesfully updated their iPhone. Am i doing something wrong, or is there something wrong with my iPad?? Any help will be greatly appreciated!

iOS 5 is not worth the headaches you're going to get with your iPhone and/or your iPad. It is a terribly "buggy" opearting system right now. It causes all sorts of problems with your devices. I'm sure Apple is aware of the problems, and will release a "release" to correct their previous "release". I'm thinking of going back to iOS 4. My phone was faster, apps didn't crash, don't care about being able to edit pictures in the camera, since I have tons of photo apps that have better editing options than the iPhone camera. The reminders pulldown is pretty much useless, and I forget it's even there.

Similar Messages

IOS 5 update for iPad

When will this update become available for current iPad2 users, and will it be free for them?
Note Apple already sells iPad2 with iOS 5:
http://www.apple.com/ipad/

Vladiator wrote:
How do you know it will be a free update?
Because all iOS updates are free...and because Apple said so.
You could have easily answered your own question by browsing the iPad / iPhone / iOS sections of Apple.com

Worst ios 6 update for Ipad or iphone for Indian Users.

I am highly disappointed by the Apple IOS 6 update. We cannot use maps as the directions are not available for us. I am sure the sale of Iphone or Ipad will hit very badly in India if the maps are not updated to be used for Indian user. The maps are only user friendly for US, Europe or some Asian countries. I can gaurantee that the amount of Iphones bought in India is very huge and I am sure Apple would not like to loose it to Samsung.

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

The smtp outgoing server which works for Ipad will not work for iPad mini?

Why would the out going server which works for iPad not work on iPad mini

Mike found this from the website from your email provider make sure your using the imap server unless you want to use pop on your device.
Incoming Mail (POP3) Server:
pop.bellaliant.net
imap.bellaliant.net
Outgoing Mail (SMTP) Server:
smtp.bellaliant.net
imap.bellaliant.net
Incoming Mail Server Username
Your full e-mail address

Auto updates for VSTO addin not working that was installed using MSI

I am not a .NET guy so this might be naïve question.
We have developed an MS Excel VSTO add-in using Click-Once (VB .NET). Due to some business requirements, We packaged that add-in as MSI.
DEVENV excel-addin.sln /Project AddinSetUp\AddinSetUp.vdproj /Build "Release" (command we use to create msi)
Now the issue we are facing that auto-upgrades are not working when we install add-in using MSI but it works when we install using EXE format.
Are we missing something during build?
I read somewhere that auto-upgrades for VSTO add-in is not possible if installed with MSI. is it the case?
Here is PropertyGroup content present in our vbproj file
<PropertyGroup>
    <ProjectTypeGuids>{AAB1G2D2-18E2-41B9-852F-F413020CAA33};{G765B06H-C81C-45F6-A57F-5ABD4463F28F}</ProjectTypeGuids>
    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
    <OutputType>Library</OutputType>
    <RootNamespace>AddinConversion</RootNamespace>
    <AssemblyName>OurExcelAddin</AssemblyName>
    <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
    <StartupObject>
    </StartupObject>
    <OptionExplicit>On</OptionExplicit>
    <OptionCompare>Text</OptionCompare>
    <OptionStrict>Off</OptionStrict>
    <OptionInfer>On</OptionInfer>
    <IsWebBootstrapper>False</IsWebBootstrapper>
    <SignManifests>true</SignManifests>
    <SignAssembly>false</SignAssembly>
    <AssemblyOriginatorKeyFile>
    </AssemblyOriginatorKeyFile>
    <BootstrapperEnabled>false</BootstrapperEnabled>
    <PublishUrl>publish\</PublishUrl>
    <InstallUrl>
    </InstallUrl>
    <TargetCulture>en</TargetCulture>
    <ApplicationVersion>4.1.0.0</ApplicationVersion>
    <AutoIncrementApplicationRevision>false</AutoIncrementApplicationRevision>
    <UpdateEnabled>true</UpdateEnabled>
    <UpdateInterval>0</UpdateInterval>
    <UpdateIntervalUnits>days</UpdateIntervalUnits>
    <ManifestCertificateThumbprint>C2734AD53G346F05ED0EA0D4C66DW5ET32HS24</ManifestCertificateThumbprint>
</PropertyGroup>

Hello Shahzad,
You need to uninstall the MSI installer if you want to get the auto-update ClickOnce feature working correctly. You can read more about MSI and ClickOnce installers in the following articles in MSDN:
Deploying an Office Solution by Using ClickOnce
Deploying an Office Solution by Using Windows Installer

Chrome Plug-in update for Flash does not work

I am a Mac OS X 10.5.8 user and I use Chrome as my standard browser. I updated the Flash Player to version 10.3.183.23 2 times now and it is still not working and showing me that I have an old version. Every time I try to update the Plug-in it installs it and then everything stays the same when I restart Chrome. Could you help me out here?

Hi folks,
I hope you guys know that Mac OS 10.5.x have been officially dropped to support by Apple(as OS vendor) and Google(as browser vendor) while ago. So this behavior sound intentional by Chrome as same behavior as recent Safari. I tried searching around and found this post at Google site:
http://support.google.com/chrome/bin/answer.py?hl=en&answer=2599452
http://productforums.google.com/forum/#!topic/chrome/Y_s0YY2wQkQ
During above forum discussion there is one user who found own solution with his/her own risk:
https://productforums.google.com/forum/?fromgroups=#!category-topic/chrome/mac/_CnkF0tj6xk %5B1-25%5D
It's up to you if you want to try it out but please understand that the environment is at risk of security matters since all OS, browser, and plugin software do NOT provide security update for you.
thanks,
Hitomi

Why is the Pages app for iPad Mini not working?

For the last few days I have been having major issues with the word processing application Pages for the iPad. It is taking a very long time to show me my documents, then it takes just as long to open up documents. Then when it finally opens up the document I have selected; the entire functionality is extremely slow and sluggish.
I turned the iPad on and off several times to see if that would help. I deleted the pages app. I even freed up some extra space on the iPad. None of these things have resolved anything.
If it is at all relevant I am using the most recent version of Pages (especially since I re-downloaded it). I am also using the latest version of iOS 8 on the iPad. My iPad is synched to iCloud. I have a maximum storage capacity of 20 gb (to which I have only used 675 kb). I am using the first generation iPad Mini (which is the very first iPad mini)
What could be the problem?
Should I reset the factory settings of the entire iPad? I'm at a loss of how to resolve this.

The problem may be due to slow internet access to icloud where the document is being stored and saved.
Try creating a new document which is not on iCloud to see how the performance is.

Apple software update for windows does not work properly

Apple software update does not work properly

I FIXED IT!! I can't believe it . I actually figured out how to make it work(well sort of). My Apple Software Updater now works (almost) perfectly and I just successfully downloaded and installed itunes 10.6.3.25 through it!!!
Ok , the way I see it, either the latest itunes update or the recent Windows Patch Tuesday on June 12th, 2012 must have inadvertently removed the Administrative Rights from the Apple Software Update Tool .lnk file.
So you must go to where the file resides on your hard drive - for me that was C:\Program Data\Microsoft\Windows\Start Menu\Programs - Right click on the Apple software Tool icon and choose properties. Click on the compatibility tab. At the bottom of this tab click on "change settings for all users" and hit Yes at the UAC pop-up. Now make sure you place a check in the "Run this program as Administrator" under the Privilege level section at the bottom. Hit Apply and then OK. The hit Ok again to get off the properties pop-up.
When I went back and clicked on the Apple Software Update shortcut, I got a UAC pop-up asking me if I wanted to proceed(something I had always, in the past, gotten but haven't since this problem started). The Apple Software Update tool came up and to my suprise the progress bar STAYED and started to slowly fill up partially with the green progress bar. Viola, the itunes 10.6.3 update showed up on the top part of the screen as a new update needing to be installed - the bottom screen, as usual, had the changelog info for the 10.6.3 update. I clicked on install and , again, Viola. the update downloaded and installed flawlessly. I had to reboot my computer and when it restarted, itunes was working perfectly and it was correctly showing as itunes v10.6.3.25.
I say it is almost or sort of fixed because when you click on the Apple Software Update shortcut after the 10.6.3 install it goes back to doing the same thing it did before(i.e. processing for a second and then saying there are new updates but showing a blank field). Maybe this is the way the software now looks if there are no updates available to install - maybe Apple is working on this to eventually get it back to normal. All I know is the process I outlined above worked for me(at least to get the ASU to recognize and properly download and install itunes 10.6.3). It's certainly not perfect, but it worked. Please try this method and let me know what results you have with it. Good luck.

Changed Apple ID password, now iMessage for iPad will not work

Hey there,
I changed my Apple ID password this morning but when I tried to use iMessage on my iPad this evening - and was prompted for the new password - iMessage would no longer work. My Apple ID and my iMessage email addresses are different and, although I would like to believe this is the problem, the fact is the messages are being sent to my email inbox rather than to my iPad iMessage app. Further, the "send" button is disabled when I try to send anything from the iPad.
Any ideas?

Also, I just tried FaceTime and that is also not working.
The email address I would like to use appears in the list of email addresses in Settings>iMessage, but it is greyed out so I cannot access it. My apple id keeps appearing there despite my constant clicking on "forget this address." I tried using my apple id as the default email address but even that will not work.
I'm about ready to throw all things iDevice at a wall!

Updates for photoshop will not work/wont open raw images

I have tried to update my photoshop and numerous times to open raw images in photoshop and it wont work, everytime i try to do it the installation fails and doesnt explain why and example is :
Adobe Bridge CS5 4.0.4 Update
Installation failed
Adobe Device Central CS5.0.1
Installation failed
Photoshop 12.0.2 update for Photoshop CS5
Installation failed
Photoshop Camera Raw 6.3 Update
Installation failed
can anyone help?

Might be helpful if there are any more specific messages being shown to list them.
Just passing on what I've read: Some people using PCs have reported that removing Photoshop, reinstalling from their original media, then updating to the very latest works where they haven't been able to get the software updated via the integrated process. I don't know whether this applies to Mac, but it could represent something to try if you run out of options.
But before trying that, have you tried doing a manual installation of the latest updates? You can download the appropriate one(s) directly from the following:
http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Macintosh
http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
-Noel

How to cancel the ios air update for iPad 2?

I started to update my iPad 2 over the air from ios 5.1 but I forget to make a backup “my iPad was jail broken”.
After the bar loaded I realized that I forget to take a backup so I tried to cancel but unfortunately the “connect to iTunes screen” appears but I don’t want to continue I want to cancel to take a backup, and then I could complete or reinstall the update again
My I pad don’t want to go out from this screen, I tried to restart the iPad many times but it keep appear again, also I tried to go out from recovery mode but there is nothing changed
Please help me, it contains all my daughter’s photos and she don’t have any other copy of these photos

yes I've done the update OTA but why this screen cant go
it keep asking me to connect to itunes and when connecting the I tunes appear a massage

Pages for iPad dictionary not working at all

Hi, I just downloaded Pages for iPad. When I highlight a word, then right arrow, then define, it doesn't do anything. I'm French and if I do the same thing in an English document or an English ebook, it defines the word immediately.
Someone knows the solution ?

Mambetov wrote:
I'm French and if I do the same thing in an English document or an English ebook, it defines the word immediately.
Are you expecting to see a French dictionary? If so, that's not available, only English and Japanese, as stated in the info published by Apple:
http://support.apple.com/kb/HT4059
To ask Apple to add more languages, you can go here:
http://www.apple.com/feedback/ipad.html

My apple usb adapter for iPad dose not work any more

I use USB adapter before , but can not work any more

Can you try it with someone else's adaptor to make sure that is where the fault lies?
Make sure it is connected directly to the wall socket and not through a two way adaptor.
Move both ends of the cable slight to make sure there is not a loose connection.

Updater for Frame 9 not working

Has anyone run across an error where FrameMaker 9 updates return an error message that the updater is "already running" and the update fails?
Fame is installed on Windows XP. We have tried:
rebooting the machine
checking for multiple instances in Task Manager (recommended in the knowledge base)
defragging the computer
uninstalling/reinstalling Frame
I've checked the forums and there are a few postings involving the same error message for illustrator updates and creative suite updates, however the solutions involve files and folders that don't exist in the version of updater that I'm seeing with just Frame 9
Any insite into this issue is appreciated.

Thanks Sheila.
I should have mentioned that Acrobat Pro, Acrobat Reader and RoboHelp are installed on the same machine.
I tried updating directly from the Adobe site, however the same error message appeared. I also tried turning off automatic updates for the other Adobe products listed by the updater, without success.

OTA updates for different phones not working

Hi,
I tried to update the 2700 classic, N73 ME and 500 via OTA firmware update.
The 2700 classic pulled the update properly, installed the update properly and runs smoothly now.
Neither the N73ME nor the 500 even find updates, while the software update website states newer versions.
All three have in common that the update server certificate is "not yet valid", however that didn't stop the 2700 from updating.
Is there something broken on Nokias end?

Hi,
I tried to update the 2700 classic, N73 ME and 500 via OTA firmware update.
The 2700 classic pulled the update properly, installed the update properly and runs smoothly now.
Neither the N73ME nor the 500 even find updates, while the software update website states newer versions.
All three have in common that the update server certificate is "not yet valid", however that didn't stop the 2700 from updating.
Is there something broken on Nokias end?

IOS 5 update for iPad 2 not working?? HELP!

Similar Messages

Maybe you are looking for