IOS 6.0.1 funky update ?
i just did the 6.0.1 on an ipad2 and it just keeps rebooting after about a minute. tried reset on various parameters, no change in fact added some flickering to the routine.
tried to initiate a factory restore via itunes usb on an iMac and every time iphoto cranks up the ipad sends file data and reboots just before finalising.
so i've forced iphoto to quit before it starts it comunication to ipad and wait for itunes to see it proper, then itunes stops responding and ipad restarts.
over and over again.truly bizzarre.
i have had a few dodgy emails that i have dealt with via a macbook which i use spcifacally for email only. of course they were downloaded to the ipad.
my question im going to put out there is.....
have i got a funky update ?
or is it possible to catch a full on cold like a PC on an ipad ?
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom
Similar Messages
-
I attempted to update my iPhone 4 from ioS 5 to ioS 6 from iTunes on my laptop using Windows 7 OS, I had downloaded the new ioS 6 and started the update on the iPhone 4 and everything seemed to be going routine until the phone had been going thought what I though was the update process, when an error window opened up and it said that an error had occured and the iPhone 4 could not be updated. I have never had a problem like this before and it caught me off guard and I did not note all the information in the error window, but it did not appear to indicate anything other than that I would have to abort the update and did not think it would be that big of a problem. I tried to disconnect the phone and was going to do the update at a different time when I could investigate what the problem was. However I could not get iTunes to recognize the iPhone 4 after this and still cannot. After rebooting the laptop a few times and also trying to reset the phone a few times as well, I just have a dead phone. The iPhone 4 just has the image of a USB cable with an arrow pointing to an icon for iTunes. I have tried to get iTunes to recognize the iPhone, but cannot get it to. I am unable to do anything else with the phone. It seems like the phone is in a state where it does not have enough software loaded to do anything or I don’t know how to get it to. Any suggestions how I can get my iPhone 4 back into service. Note: iTunes still recognizes my iPad and iPods, so iTunes seems to be okay to me. Craig
I had this problem on my iPod Touch 4g. Just press the home and sleep button. Wait and it will give an iTunes and cable logo. Now you can put in DFU mode (Hold Sleep and Home button 10 seconds and then release the power button kand keep pressing on the home button.) Now you will be able to restore it in iTunes.
If you didn't sell it in al this time -
Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything. Looks like the screen is on it's just unresponsive and black obviously. Has anyone had this problem? I was updating via wifi right in front of my router and my computer.
Spoke to a "senior advisor" in the Apple TV department. Her suggestions: change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers. So she confirms that the problem is one of connection to router suddenly dropping out.
My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue. It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more. Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department. Make them aware of this problem! -
I need to update my ipad but i need to use a different pc because the orginal pc no longer exits will I lose my apps and others like it says I want to make sure before I follow the steps also will this effect our two iphones which are connect with calendar and notes?
You might also see this article on how to sync your iPad with a new computer.
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
If planning to update to iOS 7 be sure to update iTunes on your computer to iTunes 11.1 -
iOS 5.1.1 Software Update - just tried to update and it didn't work! Got to the final stages and was presented with error 1602! My screen now has the frozen image of the itunes logo and usb thing. Happened once before - funnily enough when doing an update back in November - I had to visit an Apple store to have the phone restored. Would appreciate any advice as I would like to avoid another trip to the apple store.
found the real problem.
In my laptop where it couldn't detect the iphone and ipad, this folder is missing:
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers
The ipad was wrongly using a microsoft driver.
I found the correct drivers in:
C:\Windows\System32\DriverStore\FileRepository\usbaapl64.inf_amd64_neutral_c111a aecb61e9a2b
Copy the contents to
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers
After that, I had to update the driver for Ipad in device manager.
Ipad was found under: "Removable Devices", as a storage device.
Once that is fixed, itunes can detect ipad, and I can restore it.
Apple should really look into ensuring that folder doesn't go missing during itunes update process. -
HT6162 iOS 7.1 won't update on my iPhone 5 it keeps coming up with a error message
iOS 7.1 won't update on my iPhone 5 it keeps coming up with a error message
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
If you use your device's Personal Hotspot for your computer's Internet connection, update your device wirelessly or connect your computer to another network.
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
http://support.apple.com/kb/ht4623 -
what do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?
Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
“SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
Here is my original post explaining what I had already tried:
“Hi all,
I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
Can anyone help? Please?!
Thank you!!!
P.S. We have a PC, with Windows XP Home.”
Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
Tiffany
P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution. -
The error
Therewas a problem downloading iOS 3.1.1 software update for ipod touch. an unknownerror occurred (8288). Please check that the connection to the network is active and tryagain.
Keeps coming up when I try upgrading iOs 3.1.1 software to my 8gb 1st generation iPod touch! Please help! I've looked at all other posts related and none helped.Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
“SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
Here is my original post explaining what I had already tried:
“Hi all,
I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
Can anyone help? Please?!
Thank you!!!
P.S. We have a PC, with Windows XP Home.”
Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
Tiffany
P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution. -
How to remove OTA Settings badge after delete of IOS 8.0.1 software update from storage
Running iOS 8 I had downloaded and not installed IOS 8.0.1 software update. A "1" Badge appears as expected on my Settings icon. I then removed the software from storage. Settings->General->Usage->Manage Storage but the badge was not removed. Things I have already tried that did not work:
- Checked for software update
- Rebooted phoneSo with the release 8.0.2 the badge went away once I updated.
I did however download, watching it until it completed. Then chose "LATER" before the timer ran out.
Then went back to install it. I am not sure if forcing later is needed, but I wanted to make sure it would force it to update the badge to "1" once I went to install it. If someone else who has the problem tries it without choosing "LATER" please update the thread for others to let them know if it was needed. -
Error 1669 after updating to ios 7, Error 1669 after updating to ios 7
Error 1669 after updating to ios 7, Error 1669 after updating to ios 7
how to solve error 1669
STEP 1: Delete iTunes from your computer. Also make sure you remove the cache(open itunes then press edit wich is located on the tool bar and then click on preferences and then go to advanced and click on reset warrnings and reset cache).
then go to your hard disk and go to program files and delete folder named itunes.
Note: If you have any libraries or locally cached data that you want to keep, temporarily store them somewhere until you get the situation fixed.
STEP 2: Once it is completely deleted, download iTunes 11.1 from Apple servers.
STEP 3: Download iTunes 11.1 from here.
STEP 4: Now connect your iPhone, iPad or iPod touch to computer.
STEP 5: Click “restore”, it should present you with a notification saying a new version is available.
STEP 6: Simply Click download and install, and sit back and relax.
The process should be completed and your error 1669 should be fixed. -
Software iOS 6.0.1.failed update, Software iOS 6.0.1.failed update
Software iOS 6.0.1.failed update what to do next
Is your iPad currently running an iOS lower than iOS 5? Did you get an error message with a #?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
My iPod is up to a 4.1 ios, and it won't update to a 5.1 which I need for some of my apps for school. It keeps saying that my internet connection is bad; but, it works just fine. What do I need to do?
If you get a network timeout error, then disabling the computer's security software duirng the download and update usually resovles that error.
If that is not the error what is the wording of the error message.
Note that only a 3G or 4G iPod can go to iOS 5. A 2G iPod can only go to iOS 4.2.1 -
Unable to update older ipad (model MB292LL) to ios 6 - when checking for update msg says ios 5.1.1 and is already up to date.
That is correct.
You have an original iPad.
iOS 5.1.1 is the end of the line - that is the latest iOS that model can use. -
Can i update my iphone 3G with IOS 4.1 to IOS 5?, can i update my iphone 3G with IOS 4.1 to IOS 5?
can i update my iphone 3G with IOS 4.1 to IOS 5?, can i update my iphone 3G with IOS 4.1 to IOS 5?
wheewhee wrote:
can i update my iphone 3G with IOS 4.1 to IOS 5?, can i update my iphone 3G with IOS 4.1 to IOS 5?
No
It will only go to 4.2.1 -
Trying to update iPhone 4 to the latest iOS 5, the error "cannot update due to incompatible firmware" prevents install. Any idea on where to find firmware update or resolve?
The correct way to upgrade the firmware is to first assure that you have the latest version of iTunes, then connect the phone to your computer. Click on the name of the phone in iTunes, then "Check for Updates" on the iPhone Summary screen. It should tell you there is a new version, and ask if you want to upgrade to it. If you are using any other method, or you downloaded a firmware file from a web site, you are asking for trouble.
The only thing you might want to do is to delete any .ipsw files on your computer before doing the above, in the unlikely event that the update file was corrupted during download.
Maybe you are looking for
-
Table or Object type - like #temp table in SQL Server
Hi I need to create a temp table to hold certain data and then validate. What is the best way to do this oracle. Something similar to #temp tables in SQL Server. Thanks
-
Problem with iTunes languge , how can i fix it ?
i want to use on my mac with my languge but i want that iTunes will be in english how can i do it ? sorry about my english...
-
Urgent: File Folio Preview opens an empty "Folio Preview" panel (ID CS 5.5)
Hi! I just updated The Folio Builder panel, and the command File > Folio Preview does not send the document to the Content Viewer as usual, but opens a new panel called Folio Preview ..., which remains empty. I can preview documents as usual using th
-
INterim storage bin to unrestricted stock movemnet
Dear All, I have a problem in warehouse management Step 1 After the GR(65000 units) my system will automatically create a TR and TO to the quality inspection . Step 2 will clear the inspection lot by giving a Usage decision through the T.code QA32 to
-
Can I upload music from iPhone4 using iTunesMatch?
I replaced my iMac recently. I want to transfer my entire music library from my iPhone4 to the iTunes library on my new iMac. What is the best way to do this?