Ios 6.0b1 two problems at the moment,cannot save photos, cannot send a text

I'm using ios 6.0b1 and I'm facing two problems at the moment,
first, I cannot save photos taken by camera after editing them.
second, I cannot send a text to several people at the same time,however it can be sent individually.

this problem already solved, thank you Apple

Similar Messages

  • After iOS 5 update two thirds of the screen is black

    A few hours after my iOS 5 update two thirds of the screen is wiped out (black). The touch gestures work fine on all the screen, I just cant see two thirds of it.  Picture of the screen attached:
    Has anyone seen this before?
    I restored the iPad to its defaults but this did not resolve the problem.
    Many thanks!

    Does it stay black in the same area whichever way up you hold the iPad ? Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. But you may need to contact Apple

  • Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?

    Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?

    Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
    Take it to whoever replaced the screen and see if they can help you.
    iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

  • When i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

    when i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

    Hi there,
    When I inspect your site in browser tools, I'm getting 404 errors from your page:
    [Error] Failed to load resource: the server responded with a status of 404 (Not Found) (jquery-2.0.3.min.map, line 0)
    [Error] Failed to load resource: the server responded with a status of 404 (Not Found) (edge.4.0.0.min.map, line 0)
    BarnardosIreland wrote:
    I would have thought that publishing should give a complete package that doesn't need any further edits to the code and can just be directly ftp'ed to the web - is this correct?
    In general, you are correct - but also your server does need to be properly configured (and those errors above lead me to think it may not be) to serve the file types that your uploading - but it could be something else entirely. Can you zip up your composition folder, upload it to your Creative Cloud files, set it to share, and then post a link here so I can download it? If you'd rather not share it publicly, can you PM me with a link to your composition files?
    Thanks,
    Joe

  • I have two problems. The first one: when I conect my iphone 5 on the pc appears "-42110" and the version of itunes is the last one. The second is that I am not conectin itunes store fron the iphone appears"couldn´t conect to itunes store". I need help. Tk

    I have two problems. The first one: when I conect my iphone 5 on the pc appears "-42110" and the version of itunes is the last one. The second is that I am not conectin itunes store fron the iphone appears"couldn´t conect to itunes store". I need help. Tk

    First problem first
    As your iTunes is up to date, remove the SC Info folder.

  • Major log-in problems at the moment. Is XP to blam...

    There are quite a few threads on log-in problems at the moment and the Moderators have taken an interest e.g. https://community.bt.com/t5/Other-Broadband-Queries/Email-log-in-issues-for-over-a-week/m-p/1145486/...
    I've have asked here in several threads if BT has an issue with XP.
    At the moment I cannot log-in on my XP desktop. I've tried  IE8, Chrome & Firefox. I've not installed Safari - yet.
    The screen stays white and says 'connecting to BT' and stays like that for ages.
    Is anyone else having this problem. If so, are you on XP?

    Taffy078 wrote:
    There are quite a few threads on log-in problems at the moment and the Moderators have taken an interest e.g. https://community.bt.com/t5/Other-Broadband-Queries/Email-log-in-issues-for-over-a-week/m-p/1145486/...
    I've have asked here in several threads if BT has an issue with XP.
    At the moment I cannot log-in on my XP desktop. I've tried  IE8, Chrome & Firefox. I've not installed Safari - yet.
    The screen stays white and says 'connecting to BT' and stays like that for ages.
    Is anyone else having this problem. If so, are you on XP?
    BT websites have problems with IE8.  XP and Google Chrome do not have the same issues.  I notice that if you click on the email tab in the forum using Google chrome you need to login to your BT ID before logging in to your email.
    With IE8 when I use my standard link to the forum it does not display the blue bar with the email tab.
    Using XP you have the luxury of using Outlook Express to handle your emails. IMHO this is by far the best email client to use for HOME use.
    I would suggest you concentrate on why you are having problems with XP and Google Chrome  as the XP, IE8 and BT issues are unlikely to be fixed.

  • HT1338 I have a problem with the aspect ratio of photos as they appear on iPhoto.  They are not correct.  On the original photo people were fat and squat.  I tried rotating and they became long and narrow.  Neither correct.

    I have a problem with the aspect ratio of photos as they appear on iPhoto.  They are not correct.  On the original photo people were fat and squat.  I tried rotating and they became long and narrow.  Neither correct.  Any suggestions?

    Sounds more like a problem with your Display Resolution than iPhoto.
    Go to: Apple / System Preferences / Displays and in the Resolutions list select,
    1280 x 800 if you have a 13" MacBook Pro
    1400 x 900 if you have a 15" MacBook Pro
    1920 x 1200 if you have a 17" Macbook Pro

  • Since moving my iPhone 4S with iOS 7.0.4 to straight talk I cannot send or receive mms messages. How can I fix that?

    Help me please... Since moving my iPhone 4S with iOS 7.0.4 to straight talk I cannot send or receive mms messages. How can I fix that?

    Since Straight Talk, using a GSM iPhone is not "officially" supported, you're gonna have to configure the APN settings manually. Go here:
    http://www.unlockit.co.nz/unlockit/
    This site is a collection of APN setting for unsupported GSM carriers. This is a good place to get the correct settings for your phone.

  • HT5625 I cannot send a text thru iMessage.  I followed the directions over and over again but can't make it work.  Also how can I find out all the apple ids I may have.

    I cannot send a text thru iMessage.  I followed the directions over and over again but can't make it work.  Also how can I find out all the apple ids I may have.

    A wet phone is out of warranty. This is considered user damage. Even if you were able to get it to start now, the chances of it working for long are slim. I suggest going to Apple and see about an OOW replacement. One for the iPhone 4 is only $149USD and it would come with a short warranty. It is a refurbished device and you would not be worried about encountering additional problems.

  • My Outgoing IOS E-Mail SMPT says OFFLINE and I cannot send email, only receive.  suggestions please?

    Hello,  My Outgoing IOS e-mail says OFFLINE (SMPT) and I cannot send e-mails, only receive.  Internet connection is fine and my Internet Company says all connections are fine with their server and passwords are good too.  Says issue is with Apple.   Any suggestions please?

    Hello Fab A.,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Mail:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • I have an Iphone 3gs and I want to cancel the sound that makes when I send a text! I don't want to put the phone all in silent! just to turn off this awful sound everytime I send a text! pls help!

    I have an Iphone 3gs and I want to cancel the sound that makes when I send a text! I don't want to put the phone all in silent! just to turn off this awful sound everytime I send a text! pls help!

    Yes, I have the option "NONE" on my phone but what happens is that I have the incoming text without any sound (selected in "none") but when I send a text, still happens! that annoying sound!

  • Two problems with the GSS's

    Here are two problems I am currently experiencing:
    - IP failover with no apparent outage at primary site
    - Unreliable GSS proximity
    Has anyone experienced any of these issues with a GSS?
    Please advise what you did to resolve the issue. Thank you so much.

    network proximity uses either a TCP SYN-ACK or an ICMP Echo to determine round-trip times. This is often a problem because most firewalls are stateful and will drop a TCP SYN/ACK as an out-fo-state packet. Often times, ICMP Echo requests are also dropped. The other problem is that any congestion within the network can lead to unpredictable RTTs.
    You can use the following commands to see the actual RTTs recorded in the PDB.
    show proximity database all
    assigned
    group
    inactive
    ip netmask
    no-rtt
    probed

  • Two problems with the newly implemented WF in UWL

    Hi all:
           Finally I could see WF of leave request  in UWL , but there seems to be two problems with it.
           The first is workitems disappear very slowly, for example , when approve it, the workitem would disappear at once at backend, however, workitems would disppear in five minutes.
           the second is for example employee A submits 5 five applications (just for example ), as click one workitem, five applications would appear the  application list .
          could you please kindly give some suggestoins ?

    Hi,
    reduce "Default Cache Validity" value to 1 from Universal Worklist Service Configuration link under System Administration -> System Configuration -> Universal Worklist.
    you can configure deltapullmechanism also.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
    Regards,
    Koti Reddy

  • In my wife's iPad she cannot send a text message to an Android user, but I can on mine.  Both use the same 8.1 iOS.  When she types in the addressee name it comes up in red and will not allow "send."

    How do you send a text message to an Android user via Messages?  My wife and I both have iPads running 8.1 iOS.  When she types in the addressee name it appears in red (not in mine).  Then she is not allowed to send.

    There are a lot of posts in the forums today with people having problems with iMessage.   There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
    I would just wait it out - I'm sure it will be sorted out soon.

  • Since upgrade to iOS 7 Email error on over 100KB emails "Cannot Send Mail  The message was rejected by the server because it is too large." Connecting to Exchange via Activesync

    Hi,
    Following the upgrade to iOS 7.0.3 on all our iPhone and iPad devices, it has been identified that when sending emails around 100KB in size and over an error message appears on the device stating “Cannot Send Mail  The message was rejected by the server because it is too large.” See error message below. The send/receive limit is over 10MB so this is not the issue.
    We are in an Exchange Environment using Microsoft Activesync. This issue is not evident in iOS 6. This has been tested on an iPhone 3GS running version iOS 6.1.3. We have been unable to repeat the issues seen on iOS 7 on the older OS. It is not possible to roll back to the older operating system as Apple are no longer signing the software.
    We use Microsoft Active Sync to connect to our Exchange servers through a TMG. The issue is very inconsistent, some identical emails go through, some fail. This is not an issue with the send/receive limit as this is over 10MB. The error message when it fails on the TMG is Status: 413 Request Entity Too Large, which we believe is from IIS on the CAS server.
    Does anyone have any suggest course of actions to take?
    Many Thanks

    This resolution have to attend at the server not with the ios device. My employer's mail administrator reject me to correct it from the server. As his concern is, if ither ios devices works why don't mine? So I am helpless than changing my iphone. It works fine for early versions of ios and with androids. And also one of my friends iphone4 with ios 7 (similar as mine) works too. So I guess it's something wrong with my iPhones settings. But basic question I cannot understand is it works in my phone before this ios7 upgrading. And currently working with my yahoo account too. Favourable reply expected.

Maybe you are looking for