IOS 6 AirPrint not working with 10.6 Server - FIX!!!
Not sure if there are any bods out there that use 10.6.8 server for AirPrint but if you do - you will have noticed that iOS6 doesn't see shared printers where as iOS5 does. Below is the fix. You need to be reasonably proficient with Terminal but otherwise - straightforward. Hope this helps.....
(Obviously you can stop the service and use Netputing's AiorPrint Activator but for a server based managed queueing system, this just allows it to works as it did before.)
10.6.8v1.1 Server and iOS6 AirPrint not working… Fix below…
Stop Print Services and as root from terminal using vi or equiv add the following:
(you will need to chmod 744 to edit then 444 the mime file after. 'touch' the files when your done)
It may work being left rwx but I don't know - I have just put the files back to their original state.
Restart print services after and you are all good.
usr/share/cups/mime/
File: apple.types
Add the following line in bold (I have shown a few lines either side so you know where to put them):
image/pict pict pic PICT string(522, <001102FF0C00>)
image/urf urf (0,UNIRAST)
# Image formats supported by CGImageIO.
image/imageio crw cr2 nef bay raw dcr dng orf srf fax
File: mime.convs
Add the following line in bold:
text/css application/postscript 33 texttops
text/html application/postscript 33 texttops
image/urf application/vnd.cups-postscript 66 pdftops
image/gif application/vnd.cups-postscript 66 imagetops
image/png application/vnd.cups-postscript 66 imagetops
image/jpeg application/vnd.cups-postscript 66 imagetops
Arrr - your Printer is AirPrint capable. You are printing direct from an iOS device to the printer. Some printers need a firmware update - others will work with iOS 6 straight away.
The issue above relates to Mac OS X Server 10.6.8 (not client) and in relation to Print Services. You can use 10.6 Server and AirPrint to Any printer you like - not just an AirPrint ones. This is what AirPrint Activator does for client - the above fix mends for Server.
Glad you got you problem solved anyway.
Oli
Similar Messages
-
IOS 15 not working with my TACACS server
Hi All,
I recently made some changes to the way my Tacacs server (ACS4.2) handled groups etc..
This all works fine and when I log onto my devices I get prompted for my credentials, which authenticate against AD. However, since I made these changes none of the devices on IOS 15 now authenticate. I am immediately prompted for a local password rather than a username and password..
I understand that the commands for Tacacs changeda bit in IOS15 but from what I have read and changed I'm still having trouble. Config below from once of the routers I'm having trouble with...
Am I missing something?
aaa new-model
aaa group server tacacs+ ACS1
server name AUTH
aaa authentication login ACS-List group ACS1 local
aaa authorization exec ACS-List group ACS1 local
aaa accounting commands 15 ACS-List
action-type start-stop
group ACS1
aaa session-id common
acacs-server directed-request
tacacs server AUTH
address ipv4 172.x.x.x
key 7 xxxxxxxx
and on my VTY Lines...
privilege level 15
password 7 151619050826222A2F
authorization exec ACS-List
accounting commands 15 ACS-List
accounting exec ACS-List
login authentication ACS-List
length 0
transport input telnet sshI ran those debugs, then tried to login on another telnet session -
Jul 2 15:01:57.278: TPLUS: Queuing AAA Accounting request 1781 for processing
Jul 2 15:01:57.278: TPLUS: processing accounting request id 1781
Jul 2 15:01:57.278: TPLUS: Sending AV task_id=1997
Jul 2 15:01:57.278: TPLUS: Sending AV timezone=SIN
Jul 2 15:01:57.278: TPLUS: Sending AV service=shell
Jul 2 15:01:57.278: TPLUS: Sending AV start_time=1372777317
Jul 2 15:01:57.278: TPLUS: Sending AV priv-lvl=15
Jul 2 15:01:57.278: TPLUS: Sending AV cmd=terminal monitor
Jul 2 15:01:57.278: TPLUS: Accounting request created for 1781(admin)
Jul 2 15:01:57.278: TPLUS: using previously set server 172.x.x.x from group ACS1
Jul 2 15:01:57.278: TPLUS(000006F5)/0/NB_WAIT/3120C74C: Started 5 sec timeout
Jul 2 15:01:57.630: TPLUS(000006F5)/0/NB_WAIT: socket event 2
Jul 2 15:01:57.630: TPLUS(000006F5)/0/NB_WAIT: wrote entire 144 bytes request
Jul 2 15:01:57.630: TPLUS(000006F5)/0/READ: socket event 1
Jul 2 15:01:57.630: TPLUS(000006F5)/0/READ: Would block while reading
Jul 2 15:01:57.990: TPLUS(000006F5)/0/READ: socket event 1
Jul 2 15:01:57.990: TPLUS(000006F5)/0/READ: read 0 bytes
Jul 2 15:01:57.990: TPLUS(000006F5)/0/READ: socket event 1
Jul 2 15:01:57.990: TPLUS(000006F5)/0/READ: errno 254
Jul 2 15:01:57.990: TPLUS(000006F5)/0/3120C74C: Processing the reply packet
Jul 2 15:02:11.658: AAA/BIND(000006F9): Bind i/f
Jul 2 15:02:11.658: AAA/AUTHEN/LOGIN (000006F9): Pick method list 'ACS-List'
Jul 2 15:02:11.658: TPLUS: Queuing AAA Authentication request 1785 for processing
Jul 2 15:02:11.658: TPLUS: processing authentication start request id 1785
Jul 2 15:02:11.662: TPLUS: Authentication start packet created for 1785()
Jul 2 15:02:11.662: TPLUS: Using server 172.x.x.x
Jul 2 15:02:11.662: TPLUS(000006F9)/0/NB_WAIT/3120C74C: Started 5 sec timeout
Jul 2 15:02:12.014: TPLUS(000006F9)/0/NB_WAIT: socket event 2
Jul 2 15:02:12.014: TPLUS(000006F9)/0/NB_WAIT: wrote entire 38 bytes request
Jul 2 15:02:12.014: TPLUS(000006F9)/0/READ: socket event 1
Jul 2 15:02:12.014: TPLUS(000006F9)/0/READ: Would block while reading
Jul 2 15:02:12.366: TPLUS(000006F9)/0/READ: socket event 1
Jul 2 15:02:12.366: TPLUS(000006F9)/0/READ: errno 254
Jul 2 15:02:12.366: TPLUS(000006F9)/0/3120C74C: Processing the reply packet
Jul 2 15:02:24.474: AAA/AUTHEN/LOGIN (000006F9): Pick method list 'ACS-List'
Jul 2 15:02:24.474: TPLUS: Queuing AAA Authentication request 1785 for processing
Jul 2 15:02:24.474: TPLUS: processing authentication start request id 1785
Jul 2 15:02:24.474: TPLUS: Authentication start packet created for 1785()
Jul 2 15:02:24.474: TPLUS: Using server 172.x.x.x
Jul 2 15:02:24.474: TPLUS(000006F9)/0/NB_WAIT/3120C74C: Started 5 sec timeout
Jul 2 15:02:24.826: TPLUS(000006F9)/0/NB_WAIT: socket event 2
Jul 2 15:02:24.826: TPLUS(000006F9)/0/NB_WAIT: wrote entire 38 bytes request
Jul 2 15:02:24.826: TPLUS(000006F9)/0/READ: socket event 1
Jul 2 15:02:24.826: TPLUS(000006F9)/0/READ: Would block while reading
Jul 2 15:02:25.178: TPLUS(000006F9)/0/READ: socket event 1
Jul 2 15:02:25.178: TPLUS(000006F9)/0/READ: errno 254
Jul 2 15:02:25.178: TPLUS(000006F9)/0/3120C74C: Processing the reply packet -
Applet does not work with a proxy server.URgent
Hi,
I have an asp page being hosted from a IIS server.
The asp page has an applet which gets data from a server side component which is hosted as a service on the server side.For connection to the server I am using URLConnection object and trying to connect over a TCP connection.
The problem occurs when I use an proxy in the middle.
I have changed the browser settings to include the proxy.
The following is the error I recieve:
Full :http://172.25.11.63:4590/
<-------------------------------->
OPening input stream
in Run ::::
ERROR: Created data socket but can't open stream on
it.172.25.11.63:4590//
172.25.11.63:4590//
java.io.FileNotFoundException: 172.25.11.63:4590//
at com/ms/net/wininet/http/HttpInputStream.connect
at com/ms/net/wininet/http/HttpInputStream.<init>
at com/ms/net/wininet/http/HttpURLConnection.createInputStream
at com/ms/net/wininet/WininetURLConnection.getInputStream
at TalkClientApplet.rendezvous
at TalkClientApplet.actionPerformed1
at TalkClientApplet.start
at com/ms/applet/AppletPanel.securedCall0
at com/ms/applet/AppletPanel.securedCall
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.run
at java/lang/Thread.run
...Disconnecting.
Following is my code.
url = new URL("http://" + host +":"+i);
urlconnection = url.openConnection();
urlconnection.setDoOutput(true);
urlconnection.setDoInput(true);
System.out.println("Successfully opened the URL connection at " + "http://" + host + ":" + i );
System.out.println ("Protocol: " + url.getProtocol());
System.out.println ("Host :" + url.getHost());
System.out.println ("Port :" + url.getPort());
System.out.println ("File :" + url.getFile() );
System.out.println ("Full :" + url.toExternalForm());
System.out.println ("<-------------------------------->");
os = new BufferedWriter(new OutputStreamWriter(urlconnection.getOutputStream()));
System.out.println("OPening input stream ");
// is = new DataInputStream(urlconnection.getInputStream());
System.out.println(urlconnection.getInputStream());
is = new DataInputStream(urlconnection.getInputStream());
The exact place where I get the error is whn i call URLConnection.openInputStream().
Usually this error comes with a malformed URL.But the same code words without a proxy.Also I am not making any changes to my code in both scenarios that is with or without proxy.
Please help.This is urgent and a showstopperThanks for your nice solution, but unfortunatelly it does not work with lines longer than 100 chars with Netscape. It works fine with IE and appletviewer too.
Example:
I use this code:
try {
URL url = new URL(protocol,hostName,portNumber,URLstring);
InputStream in = url.openStream();
BufferedInputStream bis = new BufferedInputStream(in);
StringBuffer input = new StringBuffer(60);
int c;
while ((c = bis.read()) != -1){
System.out.print((char)c);
input.append((char)c);
bis.close();
dataFromServer = input.toString();
catch(Exception ex) {
ex.printStackTrace();
}I use input file test.html with exactly 100 chars ('a')
Netscape Java Console:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaadataFromServer : aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaI use input file test.html with exactly 101 chars ('a')
Netscape Java Console:
?JL?yyxk?cedataFromServer : ? -
I have several old Kodak Photo CD with PCD image files. I am now using Photoshop CS5. Some years ago while using Photoshop CS4 I copied a file: "Photo CD.8BI" from an older, CS2, version to the Plug-ins/File Format folder of CS4. This does not appear to work with CS5. Any fix?
It can be made to work, but you have to run the 32 bit version of Photoshop CS5, and as I recall there's an additional DLL called pcdlib32.dll that's needed from the old installation.
See also: Open Kodak PhotoCD files in PS CS5 - is it possible? (Win XP)
-Noel -
Airprint not working with HP printer after updating to IOS5
Hi,
I have an HP airprint printer (photosmart B210) that worked fine with my ipad2 and iphone 4 all running ios 4.
Now I have a iphone 4s as well as the iphone 4 and ipad. After upgrading to ios 5, I can no longer airprint from any of my ios devices.
I have tried turing everything off anf back on (including time capsule router, printer, ios devices).
I can see the printer from ios but the job just sits waiting to print. I have managed to print one document after trying multiple times.
Anyone having this issue?
ThanksBattleAngelita,
Welcome to the HP Forum.
The fact that the SimplePass program is asking your for your Master Windows Password means the program survived the upgrade process to Windows 8.1 -- sort of.
You may want to start with the following:
Create a Restore Point >> Create a Restore Point – Win7 OR Create a restore point Win8
Close all your programs and Shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook
Boot the computer and log in
Check to see is SimplePass has sorted itself.
==========================================================================
You may want to try to Update your SimplePass program to the latest version in the version 6.x series.
Before you do that, read and follow the instructions to Export your Webcards to your .tsd file. Regardless of whether the website logins are working right now; you do need this backup in case you lose your HP SimplePass program (through complete removal / reinstallation or though corruption).
Next, consider updating the HP SimplePass program to the latest of the version 6 series. If you are already running the latest version, consider the other options in the guide, including the "Repair SimplePass" procedure.
Open the file > Click on Download > Click “Open in Adobe Reader”
Simple Instructions to Upgrade HP SimplePass
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur -
Ios 8 not working with chevy link
I upgraded my ipad 3 and iPhone 4S to IOS 8. After the upgrade neither device works correctly in my Chevrolet vehicle via Chevy Link. Both devices worked perfectly with Chevy Link when I was using IOS7.
When I plug in my ipad or Iphone it will connect and play songs but as soon as I select a playlist it displays an error message in my vehicle information screen. When you click "OK" to clear the message the device is immediately disconnected from Chevy link and the radio goes back to XM.
Any suggestions how to remedy the situation? As I said before, all of my Apple devices worked perfectly under IOS7.After having the same problem with my 2013 Chevy Equinox, I did a factory reset of my iPhone 5s and re-installed IOS 8 from scratch.
I used my iTunes backup to restore my apps, contacts, photo ..etc
Since I did that, I was able to connect my phone via bluetooth to my Chevy Equinox, make phone calls, listen to music ..etc
So far so good. I made about 10 calls, stopped the car, restarted the car and reconnected the phone and it worked.
I wonder if the upgrade from IOS 7 to IOS 8 is not working properly and causing problems with Bluetooth. It seems that a full install after a factory reset fixed my problem.
Hopefully, it is the end of the nightmare. Good luck. -
IOS 8 not working with bluetooth controls in BMW
Just upgraded to IOS 8 and now most of the interface functions with BMW iDrive stopped working. I am able to manually make and receive calls via the car and manually play bluetooth audio, but no other controls work. I cannot dial the phone, select playlists, access contacts. I have already reset all system settings on the phone, re-paired the phone with the car in every conceivable combination, etc. and still no luck. Do I have to revert back to IOS 7 which worked fine and wait for Apple to fix this problem? I called BMW and they said it is was an Apple problem. This is the response I expected from them but I believe they are correct because IOS 8 seems to be causing similar problems in other vehicles as well (I have seen Audi and Ford and a few others). Anyone found a solution to this. Apple, are you listening??
I confirm the issue, in my case I cannot make and receive calls thru the idrive since I've upgraded to IOS, I had hopes in the newest upgrade IOS 8.0.2 but the problem remains. Really disappointing. Please Apple take action soonest.
iPhone 5s, iOS 8.0.2 -
AirPrint not working with iOS 5 ...
Prior to upgrading my iPhones and iPads to iOS5 I was able to wirelessly print to my printer which is attached to my iMac (OSX 10.6.8). A while back, someone on this discussion board posted the following script to run on the iMac to enable AirPrint. After upgrading to iOS 5 I can no longer print this way. I even made certain to re-apply the script (because I know that anytime a new OSX is installed on the iMac that it gest reset).
When I select an item to print, the "Select Printer" option from the printer options screen does not find any AirPrint printers.
Here is the thing. We have 2 iPads, on ine I upgraded to iOS5 and can not print.
On the other iPad I have not upgraded and I am still able to print.
So, that tells me it is Not the script. It is Not the iMac. It IS the iOS5 install.
launch AppleScript editor and cut, paste and run the following 2 lines:
do shell script "echo '# enable AirPrint
image/urf urf (0,UNIRAST<00>)' > /usr/share/cups/mime/airprint.types" with administrator privileges
So, can anyone tell me if there is a newer script for iOS5 or some other way to make this work.
Thanks,
Brad.This happened to me as well. Printing to a USB attached and shared HP Deskjet 6940 printer worked just fine before update to iOS 5.1 even though this printer is not listed as AirPrint compatible by HP.
This is VERY fishy. Why would something work just fine and then stop after an "update".
I smell collusion between HP and Apple!
Do I now have to go a buy an "approved" AirPrint compatible printer? -
Airprint not working with 5.1.1
I have a new Samsung 3205W printer which is on the AirPrint certification list, upgraded to the latest firmware. I succeeded a single time to print to it using the photo app, but since then the printer isn't recognized any more.
I'm still able to print to it using Windows and Mac 10.8, but even advertising the printer using the airprint activator on windows and/or macosx no available printer is found. iPad rebooting didn't help either.
Any hints?
Regards, AndyThis happened to me as well. Printing to a USB attached and shared HP Deskjet 6940 printer worked just fine before update to iOS 5.1 even though this printer is not listed as AirPrint compatible by HP.
This is VERY fishy. Why would something work just fine and then stop after an "update".
I smell collusion between HP and Apple!
Do I now have to go a buy an "approved" AirPrint compatible printer? -
Binding in Prepared Statement is not working with Microsoft SQL Server JDBC
I ran the following program with sqljdbc4.jar in the class path. There is data in the EMPLOYEE table for the employee name DEMO but the following program is not retrieving data for DEMO. When the same program was run with Merlia.jar in the class path, it was retrieving data for DEMO.
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
Connection con = DriverManager.getConnection("jdbc:sqlserver://SERVER23:5000;databaseName=TESTDB", "SYSADM", "SYSADM");
String sqlSele = "SELECT * FROM EMPLOYEE WHERE EMPNAME like ?" ;
PreparedStatement sts = con.prepareStatement(sqlSele);
sts.setString(1, "DEMO" );
ResultSet rs = sts.executeQuery();
while(rs.next())
System.out.println("driverConn.main()" + rs.toString());
catch(Exception e)
System.out.println(e);
e.printStackTrace();
Can someone help me out from this issue.This is the program that I used for testing the behaviour of prepared statement with sqljdbc4.jar. Also included the code for Merlia.jar.
import java.sql.*;
public class driverConn {
public static void main(String [] a)
try{
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
//Class.forName("com.inet.tds.TdsDriver");
Connection con = DriverManager.getConnection("jdbc:sqlserver://SERVER23:5000;databaseName=TESTDB", "SYSADM", "SYSADM");
//Connection con = DriverManager.getConnection("jdbc:inetdae7a:SERVER23:5000?database=TESTDB", "SYSADM", "SYSADM");
String sqlSele = "SELECT * FROM EMPLOYEE WHERE EMPNAME like ?" ;
//String sqlSele = "SELECT * FROM EMPLOYEE WHERE EMPNAME like ‘%DEMO%’”;
PreparedStatement sts = con.prepareStatement(sqlSele);
sts.setString(1, "DEMO" );
//sts.setString(1, "%DEMO%" );
java.sql.ResultSet rs = sts.executeQuery();
while(rs.next())
System.out.println("EMPNAME is " + rs.getString(“EMPNAME”) + “”); }
catch(Exception e)
System.out.println(e);
e.printStackTrace();
Following are the specifications:
Version of the Driver:
Microsoft JDBC Driver 4.0 for SQL Server CTP3
Downloaded the driver using the link http://www.microsoft.com/download/en/details.aspx?id=11774
Java Version:
Java 1.7.0_02
Database Version:
Microsoft SQL Server 2008 (SP2) - 10.0.4000.0 (X64) -
"Hide Instance" setting not working with 2012 SQL Server Database Engine
I have turned on the "Hide Instance" setting in SQL Server Configuration Manager on my SQL Server 2012 Database Server. After several restarts of my SQL Server/Agent/Browser services, as well as the server, I am still able to browse for the Instance
from another computer. I can also find the instance by running the "sqlcmd -L" command. Is there another step to get this to work? I have seen other people suggest that you disable the SQL Browser service, but we would like to avoid
that.Hi,
According to the description, I know the you are able to find the instance in the Browse for Servers window from another computer after turning on the ‘Hide Instance’ setting in SQL Server Configuration Manager. Are you able to connect to the instance as
well?
Make sure that the HideInstance has been set to 1 in the below registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL11.instancename\MSSQLServer\SuperSocketNetLib
Note: You may take a backup of the key before make any changes on the registry keys.
For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
Thanks.
Tracy Cai
TechNet Community Support -
Menu Parameter does not work with MS SQL Server
I need to create a “Menu Parameter” from a “List of Values supporting "All" and multiple selection. This parameter happens to be a list of funds. The DB is SQL Server.
We have a stored function that takes a comma separated list of funds as a parameter. SQL Server 2005 does not support array lists as bind parameters to stored procs/functions so we do not have a choice.
The Menu parameter is effectively a bind parameter but I cannot use it directly due to the sql server limitation mentioned above. I really only have 2 choices:
1) Oracle could generate the comma separated list like many BI tools do. This does not seem to be an option but it could not hurt to ask is this is available.
2) Convert the bind variable to a comma separated list prior to passing it into the function. This is what I have tried to do below. This also has a problem in that the @liststr variable goes out of scope during execution. I see the error in the BIPublisher logs. This query works fine in Toad and Aqua Data Studio but fails when I run the report complaining about an undefined variable @liststr.
- Convert bind variable to comma separated list of values
DECLARE @listStr VARCHAR(MAX)
SET @liststr =
SELECT COALESCE ( COALESCE(@listStr+',' ,'') + fgcode , @listStr)
FROM FundGroup where fgcode in ('AOMF ALL')
- Pass the csv into the function
select *
from PeriodPNLNoNAV('1/1/2012', '1/31/2012', @listStr, '')
order by fgdescHi Martin.
I try to resolve this problem ( sqlserver masking) but I can't found the OBE mentioned.
You or anyone have examples about masking MS SQLServer, because in the Oracle documentation suggest that is possible but not "how do it", except the use of heterogeneous services.
Thanks in advance.
D. -
Network Load Balancing not working with UDP traffic (Server 2012)
Hi all,
I manage an application that receives traffic from mobile devices on cellular networks. The traffic is UDP. I have set up two x Server 2012 VMs to form part of a NLB cluster. Each server has a second NIC dedicated to NLB. The traffic is simply NATed from
our firewalls to the virtual IP. When looking at the traffic using a packet sniffer, I can see the traffic being routed correctly to the virtual IP, but the problem is that the return traffic is sent from the IP address on the actual NIC. My application does
not like the fact that the return traffic is coming from a different source IP. Is there any way to force the return traffic to also come from the virtual IP address?
Thanks!Hi
NLB return traffic for UDP would come from the node IPs.
You could use NAT on your firewalls so they come from the same public IP.
Otherwise you'd be looking at something other than MS NLB.
Cheers
GF -
AirPrint not working with OS X 10.10
Updated from previous OS X to OS X 10.10 and my epson workforce 545 will not AirPrint. "cannot find printer"
Try deleting the printer and re-adding it via System Preferences -> Printers & Scanners.
-
IOS 5 not working with BOSE soundock
After upgrading my ipod touch to IOS 5 my Bose soundock can not recognize it anymore.
Has anyone solved this problem?
Has anyone talked to Apple support about this problem?Yes, it seems to be a problem. See the previous discussions on the right side of this page under the heading "More Like This".
Maybe you are looking for
-
The screen looks completely normal besides the vertical white lines on the right hand side of the screen, as the "slide to unlock" is lighting up and the time and date are changing, but the screen is unresponsive. After several problems with Apple in
-
Multiple tables to open as 1 sheet in excel
I've built a basica depth charts to help with my fantasy football this season in numbers. Basically i have a tab with the team name then 3 tables inside of it labled offense, defense, and rookies. In numbers this opens as 1 page with 3 tables an does
-
Error while deploying composite from JDeveloper11g
Hi , Has anyone cme across this error while trying to deploy a composite form JDev11g PS1 ? 3:41:24 PM] Error deploying archive sca_FileConverter_rev1.1.jar to soa_server1 [LSPLMGMTCH:8001] [03:41:24 PM] HTTP error code returned [500] [03:41:24 PM] E
-
I have started using iWeb to create sites. I am looking for a simple tool to make simple sites even though I have been making web sites for about 12 years and am very comfortable in making HTML by hand. 1) The HTML make by iWeb is ugly. Lots of exces
-
Hi everybody! I'm relatively new to Java and I need some help. I've spent many hours googling and searching this forum but I couldn't find a solution for my problem. I have a JFrame with a JTextField and a JButton inside. In another frame I want to p