IOS 6 and Cisco guest login safari issues

Hi all,
I have been having issues with my Cisco m10 wifi router which has been installed at home and the same model at my beauty salon.
It seems that with iOS 6, Safari will not allow a login page to display for guests to log on.
I have been searching for a solution and the problem continues. Autofill has been disabled, I have changed a few settings on the router (found in another forum)
The problem persists!
One thing I have found though is, if I use Google chrome the browser goes right to the login screen! I therefore presume it is an issue with Safari.
The problem is no issue at home, but at my salon it would require that every client come in and load Chrome first! The only way to do that is to first enter my secure non guest side of my network download chrome and then go back into the guest side and run chrome in order to login .
This makes no sense at all. Along with this, after a chrome login, safari will then work on the login.
Please Apple what is the most simple solution?

First of all, you won't get answers from Apple here. These forums are only user-to-user, like you and I.
Did you try reloading the page in Safari when you launched it? I don't get the login screen unless I reload the page first.
If you have to, go to Settings > General > Reset > Reset Network Settings. This will erase all of the Wi-Fi data on your iThing, such as router passwords, Auto-Join, etc, which might remove network-joining glitches on your iDevice. Just know your router password (if you have one) before you do this, as you will have to enter it again.
Hope I helped!

Similar Messages

Dock is drastically different and no guest login option after power loss

Folks, forgive if this is addressed elsewhere. I am fairly new here.
I am running a MacBook with 10.5.8. I have been having some battery/power issues lately which I thought was resolved with a new battery. Today, my machine shut down while plugged in and a purported "79% battery" left. It has done this perhaps 2 other times in the last year or so.
When I got the machine to completely boot, there was no longer a "guest login" option which I remember setting months ago. Also, my dock had large icons, many icons for programs I run everyday were missing. All of my applications, files, etc. seem to be intact. It is as though the machine has re-set to default settings. Why did this happen? Can I go back to my old settings somehow?
Thank you!
Dani

There is no prevention or network proceedure that would prevent that matter. The correct way to fix that problem after a storm will be to disconnect everything, power units down for 15 to 20sec.(router & modem), power units back up, once units come back up to normal fuction connect the modem back to router, then connect pc to router and reboot. That should establish your connection back after power outage.

IOS 7 and IPad now I have issues.

Ever since installing IOS 7, I am having issues. Everything is slower, iPad is lagging, typing is lagging a bit, pages, while on the Internet are loading so slow, I just give up. I have time Warner turbo, and this was NOT an issue prior to downloading the new IOS. My iPad was fast, I had no issues at all with it, or Internet.
Sometimes when I click on an app, or while I have an app open, the app will close, I am taken back to my home page, and the background of my homepage turns black, with the icons their normal color. This last for about 1 second, and then I am taken back to the app I was on and everything is fine.
I lose sounds while on some games, and have to reset iPad! till they come on again. This has happened about 8 times since downloading IOS 7
I have the latest I pad, it's not even a yr old yet, 64 gig. It cost me $700 and now I feel like it's worthless, with all of these issues.

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

ARD and Cisco switches (multicast storm issue)?

We had Cisco bring in an engineer to look into our problem where ARD stalls/fails to push packages or pull reports (etc.). We never have a problem remotely controlling computers.
They told us "Multicast" needs to be on at every switch that has Macs connected. In one environment all Macs are on the 10.100.9.xx subnet, and Macs are at different locations. All the switches these dot-9 subnet Macs are connected to need "Multicast" turned on.
I've read numerous threads regarding how Macs drift in and out and ARD is not able to do what it's advertised to do. Has anyone run into this issue where Cisco switch configuration caused ARD to not perform properly?
I will summarize once Cisco resolves the issue. They're due in for another test or two before we can make the necessary switch adjustments.
Thanks,
Don

I have 3COM switches and they appear to be performing as your CISCOs are. I have computers drift in and out all day as well as my task server not responding to input at all. When trying to browse the LAN for computers, I don't receive any information regarding my computers, or I only get 5 out of 2100. I will talk with my Network Administrator and find out if Multicast is turned on. I have sent Apple 300 crash reports over the past 3 months, but have not received any word on a fix for ARD issues.

I upgraded my iPod Touch to iOS 7 and now I'm having issues?

I have the latest generation iPod touch and I upgraded to iOS 7. It installed fine but since installing a bunch of my music disappeared and when I select a song to play it will skip the song I selected, move on to a new song, and delete that song off my iPod completely. Furthermore, when I try to sync the iPod with iTunes (yes I have the latest iTunes as well), my iPod won't sync, it just sits on "Step 6 of 6, waiting for changes to be applied" for hours. This is all extremely frustrating as the only thing I use my iPod for is listening to music. Is there any way to resolve any of this?

Maybe:
"Waiting for changes to be applied": Apple Support Communities
Next
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Updated to iOS 8 and now safari crashes when u type in the search window.

I Have an iPhone 5 and updated to iOS 8 and since than my safari crashes whenever you type in the search windo. Anybody else have this problem or know of a solution?

I Have an iPhone 5 and updated to iOS 8 and since than my safari crashes whenever you type in the search windo. Anybody else have this problem or know of a solution?

IPad 3, IOS 6 and iTunes version

I know that there have been numerous threads about this but perhaps a summary up to now is a good idea.
I have the iPad 3.
I have updated to IOS6
I have no problems at all.
I run Windows 7 Professional 64-bit.
I currently use iTunes v. 10.6.3.25.
To date, I have been declining the requests to update itunes.
Should I stay with that version of iTunes / update / wait for a fix or patch?
If I update, are there work-arounds to the issues?
Thank you for any and all advice.

There are a couple of issues that I myself found out about when I upgraded! The main one being sharing between iTunes and ios devices and Apple TV. An issue I never had before I upgraded to iTunes 10.7. I believe it pertains mostly to people who are running iTunes on a windows computer. Resolved all my problems by uninstalling 10.7 and reinstalling 10.6! Wait for a fix and save urself the headache!

Cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.

when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
OS:10.7.2
Macbook Pro 2010-mid 13inch

I also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
I'm also using a Macbook Pro 13-inch mid 2010.

Site-to-Site VPN between Cisco ASA 5505 (8.4) and Cisco Router (IOS 15.2)

Hi, I'm trying to create Site-to-Site VPN between Cisco ASA 5505 and Cisco Router 3945.
I've tried create configuration with and without ASA wizard, but anyway it doesn't work.
Please help me to find where is the issue.
I have two sites and would like to get access from 192.168.83.0 to 192.168.17.0
192.168.17.0 --- S1.S1.S1.S1 (IOS Router) ==================== S2.S2.S2.S2 (ASA 5505) --- 192.168.83.0
Here is my current configuration.
Thanks for your help.
IOS Configuration
version 15.2
crypto isakmp policy 1
encr aes 256
authentication pre-share
group 2
crypto isakmp key cisco address 198.0.183.225
crypto isakmp invalid-spi-recovery
crypto ipsec transform-set AES-SET esp-aes esp-sha-hmac
mode transport
crypto map static-map 1 ipsec-isakmp
set peer S2.S2.S2.S2
set transform-set AES-SET
set pfs group2
match address 100
interface GigabitEthernet0/0
ip address S1.S1.S1.S1 255.255.255.240
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
crypto map static-map
interface GigabitEthernet0/1
ip address 192.168.17.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
access-list 100 permit ip 192.168.17.0 0.0.0.255 192.168.83.0 0.0.0.255
ASA Configuration
ASA Version 8.4(3)
interface Ethernet0/0
switchport access vlan 2
interface Vlan1
nameif inside
security-level 100
ip address 192.168.83.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address S2.S2.S2.S2 255.255.255.248
ftp mode passive
same-security-traffic permit intra-interface
object network inside-network
subnet 192.168.83.0 255.255.255.0
object network datacenter
host S1.S1.S1.S1
object network datacenter-network
subnet 192.168.17.0 255.255.255.0
object network NETWORK_OBJ_192.168.83.0_24
subnet 192.168.83.0 255.255.255.0
access-list outside_access_in extended permit icmp any any echo-reply
access-list outside_access_in extended deny ip any any log
access-list outside_cryptomap extended permit ip 192.168.83.0 255.255.255.0 object datacenter-network
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpn_pool 192.168.83.200-192.168.83.254 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source dynamic inside-network interface
nat (inside,outside) source static inside-network inside-network destination static inside-network inside-network no-proxy-arp route-lookup
nat (inside,outside) source static inside-network inside-network destination static datacenter-network datacenter-network no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.83.0_24 NETWORK_OBJ_192.168.83.0_24 destination static datacenter-network pdatacenter-network no-proxy-arp route-lookup
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 DEFAULT_GATEWAY 1
crypto ipsec ikev1 transform-set vpn-transform-set esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set vpn-transform-set mode transport
crypto ipsec ikev1 transform-set L2L_SET esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set L2L_SET mode transport
crypto dynamic-map dyno 10 set ikev1 transform-set vpn-transform-set
crypto map vpn 1 match address outside_cryptomap
crypto map vpn 1 set pfs
crypto map vpn 1 set peer S1.S1.S1.S1
crypto map vpn 1 set ikev1 transform-set L2L_SET
crypto map vpn 20 ipsec-isakmp dynamic dyno
crypto map vpn interface outside
crypto isakmp nat-traversal 3600
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
group-policy GroupPolicy_S1.S1.S1.S1 internal
group-policy GroupPolicy_S1.S1.S1.S1 attributes
vpn-tunnel-protocol ikev1
group-policy remote_vpn_policy internal
group-policy remote_vpn_policy attributes
vpn-tunnel-protocol ikev1 l2tp-ipsec
username artem password 8xs7XK3To4s5WfTvtKAutA== nt-encrypted
username admin password rqiFSVJFung3fvFZ encrypted privilege 15
tunnel-group DefaultRAGroup general-attributes
address-pool vpn_pool
default-group-policy remote_vpn_policy
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group S1.S1.S1.S1 type ipsec-l2l
tunnel-group S1.S1.S1.S1 general-attributes
default-group-policy GroupPolicy_S1.S1.S1.S1
tunnel-group S1.S1.S1.S1 ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f55f10c19a0848edd2466d08744556eb
: end

Thanks for helping me again. I really appreciate.
I don't hve any NAT-exemptions in Cisco IOS Router. Transform-set I will change soon, but I've tried with tunnel mode and it didn't work.
Maybe NAT-exemptions is the issue. Can you advice me which exemptions should be in Cisco IOS Router?
Because on Cisco ASA I guess I have everything.
Here is show crypto session detail
router(config)#do show crypto session detail
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, T - cTCP encapsulation
X - IKE Extended Authentication, F - IKE Fragmentation
Interface: GigabitEthernet0/0
Session status: DOWN
Peer: 198.0.183.225 port 500 fvrf: (none) ivrf: (none)
      Desc: (none)
      Phase1_id: (none)
IPSEC FLOW: permit ip 192.168.17.0/255.255.255.0 192.168.83.0/255.255.255.0
        Active SAs: 0, origin: crypto map
        Inbound: #pkts dec'ed 0 drop 0 life (KB/Sec) 0/0
        Outbound: #pkts enc'ed 0 drop 0 life (KB/Sec) 0/0
Should I see something in crypto isakmp sa?
pp-border#sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst             src             state          conn-id status
IPv6 Crypto ISAKMP SA
Thanks again for your help.

I updated an iPod touch, an iPad 2, and an iPhone 4 to iOS 6, and all of them now will not connect to WiFi. They all give this wierd 404 error page from Apple and insist that I need to login to the network. Bad job testing the software Apple.

I updated an iPod touch, an iPad 2, and an iPhone 4 to iOS 6, and all of them now will not connect to WiFi. They all give this wierd 404 error page from Apple and insist that I need to login to the network. What's the fix? None of the recommended fixes work in any of these devices. Reset device, reset network, renew lease, etc. None of them work.

Does the iPod work OK?
Does it charge when connect to the computer?
Does it appear in My Computer?
Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
http://support.apple.com/kb/HT1353#iPod_touch_late2009
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

IOS 8.2 on iPhone 4S - (major) Safari issue?

Hi everyone,
after getting pretty excited while watching the Keynote earlier today, I think I made a big mistake updating my iPhone 4S to iOS 8.2 immediately after release as I have a major issue with Safari now - I will try to explain:
It will take Safari several minutes to load even the most simple website (google) on the first try. If not interrupted during this time, the website will eventually load and after that Safari is as fast as it should be when opening other websites, tabs or using the address bar to search. After closing Safari - and re opening it will again, load any given site (tried NYTimes, WSJ, google, Highsnobiety, Selectism, gmail) painfully slow and after that, again work as fast as it should be.
If Safari is interrupted during this first opening of a site, it will freeze and finally shut down.
What it also kinda funny: If a site like nytimes.com has a re-deriction, to mobile.nytimes.com in this instance - Safari will notice that immediately/as fast as it should, but then takes minutes to load the site.
Internet connection via W-Lan or mobile works at the desired speed, as do apps like Mail, NYTimes, WSJ i.e.
What I tried so far:
Shut down phone and restarted - didn't help.
Reseted phone - didn't help.
What I could do:
Make a clean iOS 8.2 install ("new iPhone")
Recover from Backup.
Since it is Tuesday (10.03.2015) at 02:20 AM where I am located, I'm not really in the mood to completely restore my phone (that I need) anew right now. I will see if there will be a 8.2.1 to fix this rather soon and keep Safari opened in background, or if I will have to put up with configuring my iPhone anew in the coming week...
Greetings and thank you very much for any input you might have.
Oliver

Thank you very much for bringing that up jakefsf!
Although I didn't mess with the DNS servers in my settings in first place, I figured it couldn't hurt to try to change it - and I was right, Safari works (for) now - as it should - every-time.
What I did: I changed the DNS Server's address from my original address to 8.8.8.8 (google's DNS server) - after that Safari worked like a charm. I changed back to the original address, Safari still works like a charm. So I guess something got clogged/*whatever* - and that "playing" with the addresses removed it.
(I forgot to mention in my original post, that I too tried to delete the cache and stuff - but that didn't do the trick.)
So I guess either the Update caused the "clogging" or my Router/ISP (Which I doubt, because everything was fine on my MacBook Air - using the same Router/W-Lan) - thankfully I'm fine now with a fully operational phone.
Thank you very much for bringing this very helpful solution jakefsf!!
@jimdouglas, It can't hurt if you try to do the same. Settings -> WiFi -> tap on the circled i behind the WiFi you're using, and change the DNS Server's address to 8.8.8.8 - see if Safari works. If it does, you can go back to the settings, remove 8.8.8.8 (leave it blank) it will automatically get the address back from your router - if it still works, it did the trick.
Greetings,
Oliver

System Preferences and Safari issues

Hi I have a very concerning issue with system preferences and a smaller issue with Safari (7.0). When I open system preferences and navigate to the "internet accounts" page and try to remove an account or click the "Advanced" button, nothing happens. I see a faint flicker of the system prefs window but nothing changes. Another example is when I click on the "networks" page and try and open the "Advanced" window, nothing happens. I also can't sign out of iCloud or view my iCloud account information the buttons seem to do nothing. I've already tried installing mavericks again, deleting appropriate plists, resetting PRAM/NVRAM, repairing the disk and repairing disk permissions to no avail and I really need to find a solution. If this helps, the guest account does not have any issues described above. The safari issue is minor but when Safari opens, there is a gray box around the page title in the top bar of safari no matter what webpage im on. I have tried resetting safari, deleting caches and extensions but nothing works. I really appreciate any help with these issues.
Here is an example of the Safari issue.

Do you have the installer DVD? If you do:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the OS X Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.

IOS 8 - pictures not uploading in safari for facebook and other websites?

IOS 8 - pictures not uploading in safari for facebook and other websites? I just upgraded to IOS 8 on my iPad 3 retina display and when I try to upload pictures in safari for facebook, the picture upload just stalls and never completes. This happens in other sites as well. How can I fix this? Is anyone also experiencing this issue???

Hi Hindhaughlee, Thanks for the post.
This may not be the best place to post such a solution but maybe some users will find it. If it turns out to be a major problem with a simple solution maybe we will manage to document it somewhere.
Are you able to provide more details please:
* exactly what software and software versions is the problem with ? You appear to be a Windows 8 user, but presumably the Kaspersky software may be applicable to other Windows versions, which Kaspersky software is this tested with ?
* What is he exact error message or warning that Kaspersky generates in this situation ?
* is the problem documented elsewhere, preferably in a public open site, if so maybe you could provide a link
* can you detail simple but exact detailed Steps To Reproduce that will enable others to test out this problem and solution.
Cheers
John One of the forum moderators J99
P.S. 
Anyone with this problem finding that the solution works may wish to vote for this thread and solution. Or if someone else can produce links to examples of this or you are able to give precise Steps To Reproduce please add a post of your own.

Restoring iOS devices and app login credentials

Mostly curious here: I have about 50 apps on my iPhone. About 20 of these apps require login credentials (e.g., Twitter).
I have to restore my iPhone periodically due to syncing issues with iTunes (that's another story). When I do the restore, I am restoring from an iCloud backup. My backups are encrypted.
When the restore is complete, I've noticed that I can use some of the apps without having to re-enter the app-specific login credentials. I guess iCloud was able to back up the credentials and restore them for these apps. But for most apps, I find that I have to re-enter the login credentials in order to use the app. For these apps, it seems that iCloud did not back up the credentials.
It's tedious re-entering login credentials for a number of apps, so I'd like to understand how iCloud is supposed to work. Why does iCloud restore some app login credentials and not others? Is there a setting somewhere that tells iCloud whether to backup (and restore) app-specific credentials? Thx
FYI that I do not use iOS Keychain, I have it turned off.

mfewings,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Cisco ISE Guest Login without provisioning

Hi,
I have setup the ise based on https://supportforums.cisco.com/docs/DOC-26442 whereby I have an authorization rule for CWA and an authorization rule for guestflow with provisioning. All is working great, however I was wondering if it may be possible to setup the ise with the following scenarios with dual ssid:
1. user login to guest ssid and redirects to guest web portal and input guest credential created by sponsor (this is working well)
2. user login to guest ssid and redirects to guest web portal and input credential from AD goes to provisioning (this is working well)
3. user login to guest ssid and redirects to guest web portal and input credential from specified AD group and get internet/network access without provisioning.
For point 3, I was wondering if it may be possible and if so on how it may be accomplished? I have attached the present Authz rule for reference as well as the rule I have tried which does not seems to be working.
Any help is appreciated!
Thanks.

No it doesn't, you can test the same , while editing the wireless SSID profile, opting authentication method as smart card other than PEAP/EAP.

IOS 6 and Cisco guest login safari issues

Similar Messages

Maybe you are looking for