IOS 6 causing problems to my 4th gen iPod touch?

Are there any others like me out there? Okay I've updated my iPod touch approximately two days ago and now it's like the biggest regret of doing so. 1) when it was upgrading the software, my iPod touch went on froze for almost two hours and the upgrade wasn't loading. It only continued after a long while. 2) some of my apps suddenly "disappeared" 3) some of my apps crash when I try to open them (example: App Store, groupon, Facebook and even safari itself even though I only had one page loading) 4) everything became so laggy, my apps take almost forever to load, and whenever I type, it takes quite a while to show up especially in google search 5) sometimes my iPod just "crash" randomly and shows me a black screen for like 5 - 10 seconds and I can't do anything about it but wait until it recover.
iOS 5.1.1 was MUCH better compared to this. This is really a huge disappointment as it has greatly affected the productivity of my iPod touch. I hope your support team is able to recover and repair this damage caused by the upgrade. I look forward to a MUCH NEEDED IMPROVEMENT upgrade to counter this problem.

Have you tried doing a DFU restore in iTunes? To do a DFU restore, you will need to put the iPod into DFU mode by following this tutorial: http://www.iclarified.com/entry/index.php?enid=1034
Then, select restore in iTunes.

Similar Messages

  • IOS won't update on 4th gen iPod touch??

    This message appears: The iPod software could not be contacted. Make sure your network setting are correct and your network connection is active, or try again later.
    I have a 4th generation iPod touch. I updated my iTunes. And honestly the only thing in the above message that makes sense is to try again later. Well I tried that several times.
    I have iOS 4.2.1 and I know that the fourth generation can get ios 6 right?
    I am not a very techy person. Please if you have hints let me know.
    Thank you!

    Try:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    Ciould be just an Apple glitch

  • White Lock Screen Problem On 4th Gen. iPod Touch.

    I'm having an EXTREMELY fustrating problem with my 4th gen iPod touch (32gb). I have owned my iPod Touch for almost a year and a half now and I haven't had any problems with it until now. I updated to the new iOS 6 and didn't have any problems with it for about two weeks. But after the two week mark, I started having a white screen on my lock screen. I would press the sleep/wake button to make it lock again and pressed it to turn the screen back on and it would go away, (so that's when I thought, "eh, minor glitch, they'll fix it...). But it has been a month now and it has gotten SO much worse it's not even funny... I will have to compromise with pushing the sleep/wake button about 30 times before it will show my lock screen. But after I got it unlocked everything worked absolutley flawless. Now ever since last night I can't get the white screen to go away!!! keep in mind, I have restored it TWICE and still have the same problem. I know I am buying the new iPod Touch but I still think, even though I am out of the yearly warranty, that I should get either an apple 'fixer' to fix it for me for free or an exchange for either the same exact model iPod or the new 5th gen. I never have had such a problem with Apple until now and would expect paying $300 for a brand-new iPod Touch should last me atleast more than a lowsey year and a half...

    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Since updating to iOS 6, my 4th gen iPod touch, and my 3rd gen iPad has sound in and out. Sometimes it's on, and then all of a sudden, no sound. I've tried everything from restarting to fully resetting each one starting fresh, but nothing. Please help.

    Since updating to iOS 6, my 4th gen iPod touch, and my 3rd gen iPad has sound in and out. Sometimes it's on, and then all of a sudden, no sound. I've tried everything from restarting to fully resetting each one starting fresh, but nothing. Please help.

    I have exactly the same problem. I have tried almost everything and I am nowhere near an Apple shop as I am working in Africa.
    Did you manage to find a solution? Help please if possible. Regards Az

  • Have Macbook Pro & 4th gen iPod Touch. Downloaded & installed iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says "iTunes" Data too new to be used with this version of iTunes.

    Have a Macbook Pro and a 4th gen iPod Touch. Downloaded and install iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says --The file "iTunes Library" cannot be read because it was created by a newer version of iTunes--. I am running iTunes 10.1.  I searched for Updates to my MacBook Pro (running 10.6.7), but comes back saying no updates available. WHAT IS GOING ON??

    Is your computer still authorized in the Store menu in iTunes?
    iTunes Store: About authorization and deauthorization
    When I changed to my new MacBookPro I had to authorize it although I used TimeMachine to transfer my settings and data.
    Did you try to deselect Wi-Fi syncing and enable it again after that?
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
    Did you already transfer your purchases and manually started a backup?

  • I have a 4th gen. ipod touch.  It has software 4.2.1 and itunes always tells me I need to update to ios 6.  I always click download and install.  After the download is complete, nothing happens.  It doesn't install on its own.  Thanks,

    I have a 4th gen. ipod touch.  It has software 4.2.1 and itunes always tells me I need to update to ios 6.  I always click download and install.  After the download is complete, nothing happens.  It doesn't install on its own and there is no option to install manually..  Thanks.

    Are you sure it is a 4G iPod?  Does it have a camera?

  • TS1363 i just updated my 4th gen ipod touch with ios 6.0.1 and cant get my email to work

    i just updated my 4th gen ipod touch with ios 6.0.1 and can't get my email to work anymore

    See:
    iOS: Unable to send or receive email

  • I am upgrading from a 2nd gen ipod touch to a 4th gen ipod touch. Will I have problems syncing my new ipod to my existing itunes library/account?

    I am upgrading from a 2nd gen ipod touch to a 4th gen ipod touch. Will I have problems syncing my new ipod to my existing itunes library/account?

    Don't know why you would.
    You can sync as many ipods/iphones/ipads as you like.

  • HT4759 Will iCloud work if have 4th gen. iPod touch (iOS 6) but an iMac running OS X v.10.6.8 (1.83GHz Intel Core Duo processor prevents Lion upgrade-according to Apple)?

    Will iCloud work when iMac (1.83 GHz. Intel Core Duo) is running Mac OS X 10.6.8 with 4th gen. iPod touch (iOS 6) because unable to upgrade to Lion due to processor's inablit to meet Apple's specifications for Lion? My family had three iPod touch (iSO 6) devices and currently use iClou, but set it up with a Macbook Air using Lion- but yesterday it died. Is there any way to retain the use of oPod touh devices, iTunes purchases, and iCloud services (and the huge amount of money spent on the) if not able to use the Macbook Air? I know the iMac is "old" but do not have thousands of dollars to purchase new computer at this time.

    10.7.2 or later is required to use iCloud on the computer. Your iPod Touch, however, would have full use of iCloud.

  • My 4th gen Ipod touch won't power up but is recognized by itunes and is in recovery mode! What can I do/

    I can't get my 4th gen ipod touch to turn on but itunes see's it and is in recovery mode. I can hear the beep beep when I plug it in to the usb port. I have also charged it for 3 hrs so far but won't fire up. I tried the customery hold the home and power button routine but don't know what else to do. I tried recovery mode but the itunes say's"waiting for the ipod" and I guess cause it's not on it won't recover. Any help would be appreciated! Thanks in advance to all who reply!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My 4th gen ipod touch will not work in a philips or Sony docking station

    I bought a philips(DC320) clock radio and my ipod touch would not work in it.  Thinking it was a problem with the connector on the radio I returned it and bought a Sony ICF-CS15ip because the store was out of the philips radio.  When I plugged my 4th gen ipod touch into that again my Ipod touch would not play through the radio but the radio would recognize and charge the ipod.  I tried my daughter's 2nd gen ipod touch in the Sony and it worked great.  So It looks like there is a problem with the my ipod.  Sony claims that the ICF-CS15ip is compatible with the 4th gen ipod touch and I have the latest IOS 5.1.1 on my ipod.  Any suggestions before I go to the Apple store?  The Ipod is only 6 months old.

    You can try the standard fixes:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPOd.
    That has worked for some users.
    However, sometimes an iOS update will break compatibility. In that case yo have to wait for either Apple or the dock manufacturer to issue a firmware update.

  • My 4th Gen iPod Touch has my location wrong

    My 4th Gen iPod Touch that runs iOS 5, has my location way wrong.
    On the weather app, maps app, other apps, and icloud it shows my location is some house in Columbia, SC.
    The problem is, is I don't live anywhere near Columbia,SC! I live in Jacksonville,FL! So my question is, is why is my iPod doing this, and how can I fix it?

    The iPod get its location from where the Apple database thinks your router is located.  (Was your router ever in Columbia SC?).  In any case, sometimes Apple 's database is incorrect.  There is nothing you can do about it.  Apple should eventually correct it.

  • My 4th gen Ipod Touch won't turn on/charge?

    I have the 4th Gen Ipod touch. I was using it after it had been saying 20% battery remaining for awhile. I locked the screen, then I tryed to press the power button again to unlock it but it wouldn't work. I automatically assumed it had died completely so I tried plugging it in to charge. Even after letting it sit for a while it will not charge or turn on. I tried plugging it into a computer to charge as well, but my computer still wouldn't pick up on it. I tried the usual "hold down power button and home button at the same time for a few seconds" thing, but that was useless because my home button barely works. I cannot plug the ipod into a computer to restore it anyway, because my stuff isn't backed up and I am on iOS 4.something (as the original computer i had my iTunes on stopped working, so I havent been able to update it) so I will lose all my photos and music (I didn't purchase all my music from the itunes store). Does anybody have any suggestions? I tried calling Apple but Im out of warranty so they wouldn't help me, and theres only one Apple store in my state (and its nearly 4 hours away) so I'm basically screwed, right?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Windows 7 will not recignize my 4th gen ipod touch 32gb

    On my laptop I have windows 7.  windows will not recognize my 32gb, 4th gen ipod touch.  When i plug in my ipod all i get is a message that says "USB device not recognized" I have uninstalled and re installed ALL windows programs on my laptop.  Please help.  I have had this same ipod working on my desktop that runs win 7 with no problem. my Ipod software is up to date running iOS 6.1.6

    Hello gedd,
    I'm sorry to hear you are having this issue with your iPod and Windows laptop. If your iPod isn't being recognized in iTunes, especially if you are getting a USB error, you may find the information and troubleshooting steps outlined in the following article helpful:
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
    Sincerely,
    - Brenden

  • 4th Gen iPod Touch music app is going haywire.

    Recently my 4th Gen iPod Touch (version 6.1.6 recently updated) refused to sync any music. I have had it synced to my computer for more than a year and have been adding new music with the 'Autofill' option. However, last night it refused to sync music. The songs are visible on my iPod but greyed out. This has happened before. Usually it will sync eventually but this time is different. Around the same time my iPod was claiming to be overcapacity. I looked up solutions but none seemed to be particularly helpful. I did delete some music and videos off my iPod to no avail.
    Eventually the problem seemed to fix itself with the overcapacity claim disappearing however the data then began to inflate and adjust itself out of nowhere. It would claim my music was taking up 30gig before saying 4gig. Everything seemed to be going haywire with the data reading. When I checked the music app the artists tab claimed I had no music. I selected a song and discovered that it wouldn't play but rather start shuffling in the playlist. I can't do anything to stop this. I have turned the iPod off and on and soft reset it (I think, I held the Power and Home button for several seconds) but the actions have done nothing. it is incredibly confusing as the iPod is only 2 years old and I would like to avoid buying a new one. I'm not sure how helpful a restore or reset would be but I will try it if there is no other option. I've searched the net for an hour trying to find out if anyone has encountered the same problem. Everything else works fine except for Notes which stopped opening months ago. Incredibly confused and would appreciate any help or advice.

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

Maybe you are looking for

  • Upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy

    Hi All, upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy button. This is the issue which I am facing while working with SharePoint 2010. In a s

  • How to implement a Query iView based on user's parameter?

    Hello, I've created a Query iView which depends on a Costumize parameter that the user enters. My question is, after creating this iView, how Do I implement it at the Portal so the user will have a place to enter his parameter and receive the result?

  • Retry "Bulk Load Post Process" batch

    Hi, First question, what is the actual use of the scheduled task "Bulk Load Post Process"? If I am not sending out email notification, nor LDAP syncing nor generating the password do I still need to run this task after performing a bulk load through

  • Copy application fails

    Hi, I have three apps in my appset, legal (for consolidation), rate and ownership. I now want to add 2 user defined dimensions to my consolidation. Step 1: define the two dimensions Step 2: add members to the new dimensions Step 3: add new app (as a

  • XML Customization

    HI all; am getting the XML Out put as below, when I run abap Program... I want to display the Table name <kna1> insted of getting the <Item> in below program is it Possible to display like that or any user Customization is need . can any one have the