IOS 6 Causing problems

After upgrading to IOS 6 apps shut down, system is slow, apps open when I dont want them to.  How can I rectify this.

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

  • IOS 6 causing problems to my 4th gen iPod touch?

    Are there any others like me out there? Okay I've updated my iPod touch approximately two days ago and now it's like the biggest regret of doing so. 1) when it was upgrading the software, my iPod touch went on froze for almost two hours and the upgrade wasn't loading. It only continued after a long while. 2) some of my apps suddenly "disappeared" 3) some of my apps crash when I try to open them (example: App Store, groupon, Facebook and even safari itself even though I only had one page loading) 4) everything became so laggy, my apps take almost forever to load, and whenever I type, it takes quite a while to show up especially in google search 5) sometimes my iPod just "crash" randomly and shows me a black screen for like 5 - 10 seconds and I can't do anything about it but wait until it recover.
    iOS 5.1.1 was MUCH better compared to this. This is really a huge disappointment as it has greatly affected the productivity of my iPod touch. I hope your support team is able to recover and repair this damage caused by the upgrade. I look forward to a MUCH NEEDED IMPROVEMENT upgrade to counter this problem.

    Have you tried doing a DFU restore in iTunes? To do a DFU restore, you will need to put the iPod into DFU mode by following this tutorial: http://www.iclarified.com/entry/index.php?enid=1034
    Then, select restore in iTunes.

  • I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

    I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
    I would like to set up a new Apple Id for one of the phones and remove it from the old account.
    If I do that, can I move all of the purchased apps and songs to the new Apple account?
    Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

    Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address).  While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
    Rather than do all that, don't fight it -- use separate IDs for iCloud.  You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

  • Does any one know about the small Hardrive that "The Power Company" is producing, sponsored by Indiegogo, for small Apple mobile devices (iPhones, iPods, etc,).  Do they work or cause problems for the device or iCloud storage?

    Does any one about the small hard drive that "the Power Company" is bringing out as a crowdsourced project by Indiegogo?  Does it work, does it cause problems for IOS, iPOD Touch or iCloud?

    I have not heard that mentioned here before. What does the Indiegogo page say?

  • I have installed the new OS X Yosemite and now my FaceTime is causing problems. I can make and receive calls, the recipient can hear me, but I can't hear them. All I can hear is a crackling noise. The speakers work fine for everything else.

    I have installed the new OS X Yosemite on my macbook pro and now my FaceTime is causing problems. I can make and receive calls, the recipient can hear me, but I can't hear them. All I can hear is a crackling noise. The speakers work fine for everything else.

    Got the same problem – even after the upgrade to OSX 10.10.1. A restart usally helps. Even though the calls sometimes drop I got no crackling noise problem on iOS, though.

  • I have installed the new OS X Yosemite and now my FaceTime is causing problems. I can make and receive calls, the recipient can hear me, but I can't hear them. All I can hear is a crackling noise.

    I have installed the new OS X Yosemite on my macbook pro and now my FaceTime is causing problems. I can make and receive calls, the recipient can hear me, but I can't hear them. All I can hear is a crackling noise. The speakers work fine for everything else. Help, I need this functionality to speak to family.

    Got the same problem – even after the upgrade to OSX 10.10.1. A restart usally helps. Even though the calls sometimes drop I got no crackling noise problem on iOS, though.

  • Null values from DB2 cause problems

    Hi,
    I have another problem with database link to DB2 using IBM iSeries Access for Linux on 64 bit OEL5 with Oracle Database gateway and unixODBC 2.2.14.
    DB link works. However, null values from DB2 cause problems. Date columns that are null on db2 return a date '30.11.0002', and character columns that are null return an error ORA-28528: Heterogeneous Services datatype conversion error.
    isql returns correct results.
    How can i fix this? Perhaps set some parameters for data conversion on the gateway?
    Thank you.

    If the driver is not fully ODBC level 3 compliant and misses functions, we're lost. But sometimes the drivers are ODBC level 3 compliant but miss the correct 64bit implementation. In those cases we can tell the gateway to use the 32bit ODBC level 3 standard by setting in the gateway init file:
    HS_FDS_SQLLEN_INTERPRETATION=32

  • I want to uninstall ReloadEvery as I think it is causing problems however it is not in my list of Extensions or Plugins yet it is clearly installed, I tried reinstalling FF but it was still there! How can I get rid of it?

    I installed ReloadEvery a while ago and it seemed to be working fine however I am now having problems with FF crashing and weird things like pages not reloading and not being able to use the back button etc
    I have already tried uninstalling and reinstalling FF and upgrading to FF 4.
    When I upgraded to FF 4 I was still having problems even though I didn't have any Extensions installed at all, or so I thought. I noticed that ReloadEvery was still installed. I was rather puzzled as I had done a clean install of FF 4. I want to remove ReloadEvery to see if it will solve my problems.
    I have also tried following the help on the FF Troubleshooting about manually uninstalling Extensions but again ReloadEvery not listed there yet I am still able to use it in FF!
    I want to get rid of it!! I really need some help please.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    If clearing cookies doesn't work then it is possible that the <i>cookies.sqlite</i> file that stores the cookies is corrupted.
    Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete other present cookie files like <b>cookies.sqlite-journal</b> in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
    *http://kb.mozillazine.org/Cookies

  • FF 3.6 AND 5 on same Mac, 1 profile - can I uninstall 5 without causing problems running 3.6 or with the profile?

    I upgraded from 3.6.16 to 5, but don't like how 5 handles tabs (auto reloading 'problem loading' tabs when internet connection is reestablished). So I installed 3.6 in a separate folder, e.g. both versions are on this computer. I went back to using 3.6, and let it upgrade to either 3.6.18 or 19 (don't recall which & it's not open right now). I'm having problems with it using too much CPU & Memory, and not sure if that's a difference between 3.6.16 & 3.6.18/19, or if having 5 on the same computer even if closed could be causing the problem.
    Can I uninstall 5 without causing problems with the 3.6 version and the single profile?

    If you haven't tried this, give it a try. It worked for me, hopefully it will work for you. In your version 3 firefox, disable all extensions, I had two plugins (doubletwist and joost, disable those if you have them). Then install firefox 5 by overwriting your version 3 firefox. It should work fine after that. I tried everything before, I gave that a last ditch shot. Oh yeah, before you install firefox 5, clear your cache of everything just to be sure.
    Hopefully that helps.

  • I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

    i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
    Is this possible and how do i do that?
    Anyone who responds thanks for that!
    Juko
    I am running
    Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro1,1
      Processor Name:          Dual-Core Intel Xeon
      Processor Speed:          2,66 GHz
      Number of Processors:          2
      Total Number of Cores:          4
      L2 Cache (per Processor):          4 MB
      Memory:          6 GB
      Bus Speed:          1,33 GHz
      Boot ROM Version:          MP11.005D.B00
      SMC Version (system):          1.7f10
      Serial Number (system):          CK7XXXXXXGP
      Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
    System Software Overview:
      System Version:          Mac OS X 10.7.5 (11G63)
      Kernel Version:          Darwin 11.4.2
      Boot Volume:          Macintosh HD(2)
      Boot Mode:          Normal
      Computer Name:          Mac Pro van Juko de Vries
      User Name:          Juko de Vries (jukodevries)
      Secure Virtual Memory:          Enabled
      64-bit Kernel and Extensions:          No
      Time since boot:          11 days 20:39
    Message was edited by Host

    Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
    Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

  • TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data.  I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

    I found this  (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data.  I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder. 

    It sounds like there are a couple things going on here.  First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
    Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance.  Once you find this, make sure the service is started. 
    If not started, try to start it and see if it throws an error.  If you get an error, post the error message your hitting.  If the service starts, you can then launch SSMS and try to connect.  If you have a default instance, you can use the machine
    name in the connection dialog.  Ex:  "COWBOYS" where Cowboys is the machine name.  However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format.  Ex:  COWBOYS\Romo (where Romo
    is the instance name you set during install).
    You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install.  Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
    recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
    Thanks,
    Sam Lester (MSFT)
    http://blogs.msdn.com/b/samlester
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and
    "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

  • I replaced my hard drive and used time machine to boot from but it installedthe unrepaired disk permissions of the faulty previous drive would this cause problems on my new drive?

    I replaced my hard drive on macbook pro and used time machine to boot from but it also installed the unrepaired disk permmissions of the other drive, would this cause problems to my new drive?

    Can you remember what the permissions problem was that you had before? You may need to reinstall OS X from scratch and not reinstall anything from your Time Machine backups. To be on the safe side you should reinstall all third-party applications from scratch, as well. Then only restore from your backup your document/data files.

  • I deleted the 4oD app from my iPad but it still appears in the list in Settings. How do I get rid of that? It is causing problems when they issue updates as it apparently thinks I still have it when I don't.

    Can any one help me get rid of a deleted app 4oD that still appears in the Settings list. I deleted it from the home screen and Spotlight search confirms it has gone. It is causing problems because I get notified of updates and I cannot get rid of them either. I have tried re-downloading via my MacBook because there isn't a download option from the iPad (App Store clearly think I still have it when I don't) then deleting again but the listing in Settings remains.
    It is really irritating me.
    Thanks.

    Have you tried deleting the App within the Settings menu (rather than from the Home Screen)?
    Settings>General>Usage>
    From the Apps list, find the App (press "Show all Apps" if the app is not in the immediately shown list), tap on the app you wish to delete, then tap "Delete App"

  • If I install the update to Adobe Reader 10, will that cause problems with Acrobat Pro 9?

    Firefox (version 15.0.1) is telling me I need to install an update to Adobe Acrobat 9.4 in order to view pdf files in my browser. I use Acrobat Pro 9. The update is actually Adobe Reader 10, and I am wondering if I install this, will it cause problems with my version of Acrobat Pro?
    Because I am not sure if this is so, I have temporarily disabled the plug-in and now pdf files download automatically rather than display in my browser. I would prefer they open in my browser but do not want to upgrade to Acrobat X.
    My OS is Windows Vista. I did not include the "troubleshooting information" file because I'm not sure what specific info is being requested.
    Thanks for any help.

    Hi WMdotcom
    did you try to view pdf with your acrobat pro 9 ?
    see
    [https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file Change what Firefox does when you click on or download a file]
    [https://support.mozilla.org/en-US/kb/set-how-firefox-handles-different-file-types
    Set how Firefox handles different types of files]
    thank you

  • Reduce folders in Windows 7 for pictures without causeing problems with PSE11

    I want to simplify  my Windows 7 folders and reduce the number of the folders. Can you please advise me on the best way to do this so as not to cause problems with PSE11 finding the pictures? Thank you.

    19441965 wrote:
    I want to simplify  my Windows 7 folders and reduce the number of the folders. Can you please advise me on the best way to do this so as not to cause problems with PSE11 finding the pictures? Thank you.
    The only way to move files or folders/subfolders without causing problems, that is not creating 'missing files' is to do this from within the Organizer, not the OS (Win/Mac).
    You can create folders and move pictures from the Organizer.
    Note that if you are moving the files of several subfolders into a single one, you run the risk of wanting to move files with the same filename into the same folder ; your OS won't allow that. So the Organizer will rename pictures if needed.
    If you want to do such a big reorganizing task, absolutely do a full backup before. There is no advantage  for such a reorganizing from an Organizer point of view, but if you need it for some reason, it has to be done from within the organizer.

Maybe you are looking for

  • Can't use my phone as hotspot anymore!(after updating the iOS)

    So I just updated my very new iPhone; from iOS 5.0.1 to iOS 5.1.1. The problem is that I used to use my phone as a hotspot for my laptop(HP Pavillion), but now it isn't working! I had some trouble with my former iphone 4S but then I got a completely

  • Import video from DVD (VOB files)?

    What is the recommended way to import DVD (non-commercial/non-encrypted) footage into Final Cut Pro X? I have some clips on a DVD that I need to include in my project. I don't want to transcode and I've read using streamclip is the way to go but requ

  • Updated and now all of my podcasts are gone!!!

    I updated the app and now everything is gone!!! Do I have to start completely over again???

  • How find which method-class will be selected?

    Hello sap gurus, I have another question: There are 2 the same methods: customer_exit_event_save, BUT in different classes. One for the class CL_EX_BCA_PO_CUSTOMER_EXIT, another from the class ZCL_IM_BCA_PO_CUSTOMER_EXI Not fully clear how the system

  • CLI0108E Communication link failure. After clone machine

    AIX 5.3 SAP R / 3 4.7 Enterprise 110 DB2 9.5 fix pack 2 We did a clone machine that already had SAP and DB2 9.5 installed and changed the host and ip. After adjustments sidadm user profiles, user db2prd and adjust db2conf password file, database and