IOS-6 contact "Groups" not working

After I installed iOS-6 on my IPhone-4, my "Groups" do not open on my contact list. Syncing doesn't help. What to do?

Was all of your contacts saved directly on your phone? I notice that now in the 'groups' there is no longer a way to display all your contacts - it only shows your existing groups. For Example, I have a lot of contacts on icloud and about 20 that I saved directly on to the phone (ios5) - now it only displays the icloud contacts and there is no way to display the contacts saved directly on to your iphone. I can however see the contacts exist, since when I try to send them a mms, it shows up in the messages app- it is just weird. Try and see if you can see your contacts in your 'Messages' app.

Similar Messages

ICloud Contact Groups Not Working on iPad

I made a contact list on iCloud.com via my Mac Book (OS X Yosemite). The groups I created there do not work with iPad Air 2 mail. They show up on the iPad, but I cannot send emails to my groups. What do I need to do to make groups work?

Maybe the backup is corrupted.
Turn off iCloud backup and try deleting the iCloud backup for the iPad.
iCloud: Remove an iOS device backup from iCloud - Support - Apple
Then turn it back on and try to backup.
You can also try removing your iCloud account from the device and then re-add it.
Note: This will cause you to lose everything but the last 30 days of photos in your My Photo Stream so take precautions.

Contacts Group not working in Mail

Prior to upgrading to Mavericks, if I wanted to send an email to a Group (created in Contacts), I would type the name of that Group into the "To:" bar, press enter, and it would populate with the corresponding email addresses. This is no longer working. When I type in the name of the Group and press enter, the text disappears and no email addresses populate. I have confirmed that the Groups still exist in Contacts.
Any suggestions?

in fact its work like before, its just doesnt "show" and the text you enter just look like text and not like an blue bubble as before, so type your group in the to" field like before and send like before without seeing the individual name of the group member. clear ?!
J

After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

Hi,
the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

Response Groups not working

Hi there
My environment is a single Lync 2013 Front End Server installed on Server 2012.
It works since a year and now we want to use some response groups. I created 2 of them and everything seems fine but i cant call these groups. Not from internal and also not from external.
The clients shows an 500 internal server error with ID 26017.
So i traced the whole thing on the Front End Server. It seems the Response Group Service cant work with the local SQL Server. I see three error messages.
1. TL_ERROR(TF_COMPONENT) [2]0B90.37A8::07/23/2014-06:38:39.119.000002fb (RgsClientsLib,MatchMakingLocator.GetActiveInstanceFromDB:683.idx(479))
(0000000000150BA8)No instance registered as the active instance!
2. TL_ERROR(TF_COMPONENT) [1]1E08.2910::07/23/2014-06:38:42.462.00000a34 (RgsHostingFramework,CallControlManager.HandleAudioVideoCall:2049.idx(619))
(000000000362D054)Call is declined because Call Control is not started.
3. TL_WARN(TF_COMPONENT) [1]0B90.0B7C::07/23/2014-06:38:48.053.00000f2d (RgsClientsLib,MatchMakingLocator.GetActiveMatchMakingInstance:683.idx(301))
(0000000000150BA8)There is currently no active MatchMaking instance in the pool.
The Lync Server Event Log shows this error when the Response Group Service starts:
LS Response Group Service ID 31067
Lync Server 2013, Response Group Service Match Making could not find the Contact object used for subscribing to agents' presence.
Cause: The application has not been properly activated or the Contact object was deleted.
Resolution:
Deactivate and then activate the application for this pool.
Is there a way to reinstall / reconfigure the whole response group service incl. the active directory objects?
I hope somebody could help
Regards
Andreas

Have you seen this thread:
http://social.technet.microsoft.com/Forums/lync/en-US/cd25ddec-6e1e-4d58-9a9a-a530abfa82e3/response-groups-not-working?forum=ocsclients ?
He ran Get-CsApplicationEndpoint and received a warning that let him to a resolution.
Short of that, I'd rerun step 2 in the deployment wizard and restart services when you can to see if I could jog anything loose.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

I had somebody work on my OS 10.9.2 to speed it up. He failed and now Preview, Textedit, App Store, Mail and Contacts do not work anymore. I can still use Safari, Firefox and iPhoto etc. How do I get it fix I can still use Safari, Firefox and ed again?

I had somebody work on my OS 10.9.2 to speed it up. He failed and now Preview, Textedit, App Store, Mail (crashes) and Contacts do not work anymore. I can still use Safari, Firefox, Word, Photoshop and iPhoto etc. How do I get the Apple programs fixed again?

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

Ios 6.1 does not work anymore. Video sites

some videos on sites that previously ran with quicktime, now after upgrading to ios 6.1 does not work anymore.

Examles, please.

IOS 6 Notification sound not working!!

Hi everyone, when I updated my iphone 4s to the latest version of OS meaning IOS6, I noticed that the sound in notification is not working. Only displaying the notification. Anyone anyone else have this problem and if so how to solve it please ?

NattyNoodle
Re: IOS 6 Notification sound not working!! Sep 28, 2012 11:25 AM (in response to keith-gauci)
I've had exactly the same problem! Also the silent button on the side isnt working either. Calls seem to be ok, but emails sms facebook, none of those sounds work. Have you found a solution?
No I haven't. The difference is that my silent button is working and even sound when receving and email or an sms's. My issue is the sound of the notification of the applications. For example facebook, F1Live24 ..

Ios 8 restrictions password not working

Ios 8 restrictions password not working .... But 'am sure i didnt forget it !! ....what shall i do ?!!

Howdy Kanfoud,
If the iPhone isn't accepting the Restrictions passcode (which can differ from the normal access passcode), you'll need to restore the device.
If you lose or forget your Restrictions passcode, you'll need to perform a factory restore to remove it.
About Restrictions (parental controls) on iPhone, iPad, and iPod touch
https://support.apple.com/en-us/HT201304
Sincerely,
Allen

Ok so I use an hdmi connector on my iPhone 4S to watch netflix. But after I updated to iOS 7 it will not work my tv doesn't receive a signal. Does anyone have any insure to this please help .!.!.

Ok so I use an hdmi connector on my iPhone 4S to watch netflix. But after I updated to iOS 7 it will not work my tv doesn't receive a signal. Does anyone have any insure to this please help .!.!.

The 8 pin Lightning connector can only output 720p and lacks all iPod Out functionality unlike the full iPod Out functionality and 1080p that the 30 pin connector has and I suspect that they are coding iOS 7 specifically for the new devices which have severely reduced abilities and perhaps skipping adding the code needed for 30 pin devices to use their functionality with HDMI, etc.

Group contacts did not work correctly since IOS 6

Hi Guys,
since update from IOS 5.1.1 to IOS 6.0 it isn't possible to show groups in Contact seperatly.
Neither on my IPHONE 4 and now on my IPHONE 5.
In IOS 5.x.x it was possible to list seperate groups.
I tried this with my ICLOUD Account and also with my GMAIL Account.
I need to have different group lists for my work - e.g "Private", "Work", ...
In IOS 5.x.x it was possible to list the contact folder, than click on "groups" and there it was possible to select the group i wanted.
Than I've only seen the contacts from the selected group.
Now since update to IOS 6 it doesen't work like this. There is only the opportunity to mark or unmark a contact group to list it seperately.
Can You explain how this is going to work on IOS6 ??
Or do You know an application to group contacts seperatly.
I set up my GMAIL Account as "Exchange Account" to see the contact groups.
It's nessecary that it syncronises correctly with my GMAIL Account, because I also use an IPAD.
I've over 250 contacts, so it has to work correctly.
I can't understand, why apple removed this feature in IOS 6.
I hope you know what I mean.
Very nice greetings
Roland

Do you really have them all? I created a group I wanted and synced the phone. Now my phone contacts has 2 groups, all contacts and phone contacts. However, when I scroll to the bottom of the contacts list, both show the same 164 contacts, not all the 470 contacts in my address book. I have just the contacts I wanted, but it is confusing by having the "all contacts" list on the phone. They are really just the same lists.

Create target group for contacts does not work

Hi Experts,
I am working on a Markting solution for a University with CRM 5.0.
We need to contact certain Teachers in Schools (they have an orientation function for pupils that might study in the University in the future).
I can segment for schools in Segmentbuilder. Now, I need to generate "new target group from contact". In my case the contact person of the school is the Teacher (function type is contact person). This does not work.
Am I missing some parametrization, or is there a relation to sales area (wich we do not have).
Hoping for your help. I will regard points generously.
cristina

Hi Cristina,
I understand Schools are crated as Org and Teacher as Persons. There exist a Relationship between these similar to Contact Person (BUR001).
Now, Follow the process
1) Create a Data Source in CRMD_MKTDS.
2) Assign an Infoset Query, as per your scenario.
3) Assign Function Module "CRM_MKTTG_PF_BP_TAB_TO_CP" to data source
4) Save, and then create an Attribute List.
Go to Segment Builder and create target group based on above Attribute List.
You'll get a list of all the contact persons. For your case, Teachers.
Hope this helps......
Regards,
Vikas
PS: This will only work if Schools - Org, Teacher = Person and Relationship = BUR001. If you have other criterias please copy Function Module "CRM_MKTTG_PF_BP_TAB_TO_CP" and edit it as per your business case. Then assign this FM in Data Source.

Iphone 4 not working with iOS 6, Iphone 4 not working with iOS 6

iOS 6 is not working on my iPhone 4. When the update/restore finishes it gives me the (-1) error and cannot finish the update. Please help.

Hey.. I have had this issue since yesterday afternoon.. Some people are saying to keep restoring again and again until it finally goes through.. I have done so like 10 times on my MAC and then I used my husband's PC and tried it 4 times.. No success.. I called apple support, but no help came from there at the end, and the only thing they were able to suggest to me is to sell me a new phone just like mine for a discounted price.. **** NO
Anyways after about 18h of search and stress I came across this link:
http://techglobex.blogspot.com/2012/06/downgrade-from-ios-6-beta-firmware-to.htm l
That will only make it possibe to go backward.. You will end up back with the IOS 5, but at least you will have a working phone and it will bring back all your contacts and everything else that you ever had backed up on icloud and on your computer. There might be descripencies with the Applications but again this is an issue easily solved, you can always download them back.
Two more things: One, you do not have to download the old version of the itunes, the newest version worked for me without any issues
When choosing to download the older IOS 5.1.1, you will need to figure out whether your carrier is GSM or CDMA but you can easily google this info online..
Well hope that will work for you like it did for me

Outlook contact groups not appearing in iTunes Sync

I was having trouble getting contact groups to appear in iTunes froma outlook. For awhile I got 1 group to appear and no others. I expermentally deleted that group and it remained while nothing else showed up. Apple support had no idea what to do and I stumbled upon a solution eventually. Since other people seem to have had a similar problem judging from the forums I thought I'd post my fix if nothing else is working for you.
When you create a new group in MSoutlook (by right clicking and selecting new folder) in order to keep your contacts orginized it makes that folder in a subfolder of whichever folder you clicked on. This doesn't display in MSoffice at all, all folders simply appear in a straight line with no way for you to tell where they are. The issue is that if you have these groups in any other directory besides Contacts they will not appear in iTunes. In my case everything was a subfolder under Suggested Contacts. In order to fix/check this simply click on your groups 1 at a time and select the "move folder" option, select Contacts, then hit OK. Rinse and repeat until all your folders are filed under contacts.
Once you've completed that open iTunes, go into the info tab of your device, and sync contacts with outlook. Just select sync all if nothing appears. After the sync all your groups should appear below for you to pick and choose which groups you'd like to upload. I hope this helps.
This fix was using Office 2010 on Windows 7 (64-bit) with iTunes 10.5.2.11

Hi,
I would like to create two folders - one for me and one for my wife. So under 'My Contacts' in Outlook 2010 it looks like this:
Suggested contacts
Contacts
Suggested contacts (email address)
Simon's contacts
Julie's contacts
iTunes has picked up these sub-folders - THANKS!
However, I would like to keep the 'Contacts' folder with all the contacts in and only copy selected contacts from there and place them into my wife's folder and mine. The 'copy' function does not seem to work.
Obviously my contacts are different to my wife's and she does not want hundreds of names on her contact list.
So, basically how do I copy contacts without moving them out of the contacts folder and manually typing them all back in my wife's folder (some contacts we both need)?
Hope you can help on this one.
Many thanks,
Simon

HT2486 Smart Group not working for Multiple 'Not a Member of' Options

I am trying to go through my contacts and assign everyone to a group. I want to create a smart group whose criteria is "not in Group 1" AND 'Not in Group 2'.
This does not work. It simply gives me all the contacts.
Also, is there anyone to see a contact and know to which groups they belong. When I can't remember who someone is, it is helpful if I know what group.

I have a different conclusion : for me, it works since 10.9 where it has never worked before (and I just checked it still works with 10.9.1) !
I did not modified my groups, they simply started to work properly with 10.9.

IOS-6 contact "Groups" not working

Similar Messages

Maybe you are looking for