Ios 6 does not recognise my mobile data connection
Updated my 3GS to IO(S 6 and, although the mobile data is unchanged and shown in settings, the 3GS now says I don't have a mobile data connection. Ridiculous! Why don't Apple get these things right?
Any ideas for a solution folks?
can people contact you? If so, then there is no specific issue.
I don't have the answer, but maybe you will get an answer by asking directly on the WhatsApp forums.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:
Similar Messages
-
Whatsapp does not recognise my mobile number
Hey there. In the group chat on the above part where the group name is, it would show which contacts are in the group chat. I can see all my friends name but it shows my number. is this normal or should my number be shown as "you"? It is as though whatsapp does not recognise my number.
I have already went into setting, security & privacy and put in the same number in the sim card as in the whatsapp. Any solution to this or is q10 just made to be that way? Thanks.can people contact you? If so, then there is no specific issue.
I don't have the answer, but maybe you will get an answer by asking directly on the WhatsApp forums.
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
Automatic Updates in iOS 7 not happening on mobile data
In iOS 7 I have tunded on Automatic Updates on the iTunes & App Store.
The Updates is Showing as On. Also i would like the app updates automatically updating over my mobile data and so that setting is ON too.
Still the apps only download over wifi and not over Mobile data. Yes the aps are all way below th 100 Mb Limit
Thanks !
Cyrus DubashI'm having the same problem but I can't get the apps to automatically update on any data connection-WiFi or cellular. Anyone owe having g this problem? Is there a fix?
-
Windows 7 Pro x64 does not detect HP Mobile Data Protection Sensor (accelerometer)
Hello there.
I installed win7pro x64 yesterday and already came across a serious problem that makes my way of using the notebook a bit dangerous for my precious data.
When I was working on HP-branded Vista 32bit (from recovery partition etc), there was a device called HP Mobile Data Protection Sensor together with HP ProtectSmart (or Protect Smart) software. In other words, the HDD accelerometer that parks HDD's heads when it "feels" it's falling or something, and software for it. It worked brilliantly.
Until I decided to install Win7... Then, surprisingly after a driver-install failure and taking a look at the Device Manager I noticed that there's no such device! I checked it three times, looked at every device's property, even reinstalled Vista 32bit back - it showed again - and installed Win7 - not detected again. There's nothing that has Device ID's HPQ004! I remember people saying that after fresh Windows install, there were 6 unknown devices or more. I had only 5. [Fingerprint device, 3x MemCard reader and IR receiver]. There was no accelerometer... Also, when I try to install the drivers/software, the windows pops up:
ProtectSmart Hard Drive Protection: with text Property.AccelerometerNotPresent
and then another one saying something like Features were not installed because of installation error or unsupported feature.
So now I'm stuck with a notebook that is unsafe to travel with, because the disk is no longer protected
I already installed all the drivers available from HP page, even downloaded newest ones from Intel (chipset) etc.
Is there a solution to this? Has anyone else encountered this problem?
Windows 7 is officially out and available as RTM version, not beta, so I think HP should open support for it and release new drivers for win7! And most importantly, fix this issue ...
This question was solved.
View Solution.Well, thanks to myself, I fixed it. After some thinking I remembered that ACPI = BIOS-related. It appears that there is a problem with the newest (F16) BIOS.
F.16 changelog is below:
Version: F.16 A (26 May 2009) Fixes
Updates the Intel MRC Code to version 2.7.
Updates the Intel AHCI OP ROM to version iSrc 1.20_E.0012 11252008.
Updates the BIOS to support Microsoft Windows Vista Operating Systems with Service Pack 2 (SP2).
I went back to version F.14 and... boom! New (unknown) device found And guess what, it's ACPI/HPQ0004... So now my HDD is protected again ^^ yay!
I don't know which of these changes cause that, but it looks that that can be fixed.
I'll go back to F.16 again to see if the device will disappear and then contact HP support on that case.
EDIT: Well, F.16 breaks things again, so it's definetely a BIOS problem. Thanks for... umm... well... at least spread the word, guys I hope this helps if someone has the same problem.
Message Edited by dark_skeleton on 08-22-2009 07:08 AM
Message Edited by dark_skeleton on 08-22-2009 07:11 AM -
Connecting c309a to a wireless network, the printer does not find my mobile hotspot connection.
I switched to a mobile hotspot w/verizon. I had set up my computers (2) just fine the first time. I had to exchange the hotspot. I was told by my computer to insert a flashdrive and transfer my network settings to the printer and other computer. After inserting the flashdrive into my photosmart c309a printer, it flashed "turn off and on" I did, then the printer had lost the network settings menu altogether! I took it to bestbuy to be looked over and was told they were able to get my network menu back but it was still unable to register a wireless connection?? I'm not sure what to do now?
Sometimes DSL providers have more control over the router than the printer likes. There is what I believe to be a similar situation here in the states with ATT 2Wire routers. This is a cut and paste from instructions on how to fix that. Try it and see if it works.
- Unplug the telephone line from the router
- Turn the power off on the router, wait 30 seconds, then turn the power back on.
- Go through the normal process of connecting the printer to the device.
- Now find the IP address of the printer (it should be on the self-test printout), type it into a browser.
- In screen you will find a Networking Tab, then on the left Wireless, then the IPv4 Tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 255 (the last number in the address).
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Use the router's IP address for the gateway and the first DNS (leave the second blank).
- Finally, plug in the phone line and test.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Itunes does not recognise ipod touch 3rd gen
Computer suddenly does not recognise the ipod when connected... downloaded the latest version of itunes on computer but does not help, no clue how to solve this... any suggestions? Tried another mac, but same problem.
See my response to your other post.
-
Use Mobile Data For: Settings - Why does Settings need a cellular data connection?
iPhone 5 iOS 8.1
Settings > Mobile > Use Mobile Data For: Settings
Just curious, why does the iPhone need this turned on? Why does the settings app need a cellular mobile data connection?
If you turn it off, you're pestered to turn it on every time you go into settings?Because, that's the way Siri works...it needs an Internet connection...requests are sent to Apple's servers. No Internet, no Siri.
-
Facetime on my ipad does not recognise my apple id password after i have upgraded to iOS 6.1
After upgrading my ipad to iOS 6.1, Facetime does not recognise my Apple ID password. The password works fine on the app store, I have even tried changing the password, but Facetime refuses to recognise the password, and therefore unable to activate. Has anyone else faced such an issue?
The Connect to iTunes screen appears when something went wrong on your iPad or the update requires connecting your device to your computer running iTunes. Start iTunes on your computer and connect your iPad. Usually you will be guided through the process of getting your iPad running again. If not come back here for assistance.
-
Hi, i have received an iphone 4s from japan! whwn i connect it to my pc, itunes does not recognise it. what can i do?
For this issue you might try a couple things.
First, try to restart the Apple Mobile Device service by clicking Start and searching for Services. Stop the service, then restart the service.
If that doesn't work, you can remove and reinstall iTunes.
http://support.apple.com/kb/HT1923
This article will help with that process. Follow it exactly. -
I have iPhone 6, 8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank you.
See iPhone BT profile on what can be connected/paired:
iOS: Supported Bluetooth profiles - Apple Support
And BT troubleshooting:
iOS: Troubleshooting Bluetooth connections - Apple Support -
my wifi is not connected on my iphone and when i try to connect it does not recognise my password
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
my i pad shows connect to itunes but my computer does not recognise the devise -- it was ok until i tried to do a software update
Try and force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
HT1923 itunes does not recognise CD's uploaded , can't connect to server it states ,
itunes does not recognise CD's uploaded
can't connect to server it states
although PC is connected to the internet itunes can't find the connection
have an ipod nano
this is complicating things as I can't change what's on the ipod eitherTry a hard reset by pressing the Home button and Wake / Sleep button at the same time, keep them both pressed until the Apple Logo appears on the screen.
This does not lose any data on your iPad. -
I-tunes does not recognise ipad to restore after failed update to ios 5
i-tunes does not recognise ipad to restore after failed update to ios 5. Connected i-pad to update to new ios 5. Back-upp went fine but update failed and now i-tunes does not recognise the devise and i-pad will not work so I have no known way to restore.
Copied from that article.....
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
Are you releasing the home button when you see the connect to iTunes screen? Does iTunes start on its own? If it doesn't - start iTunes yourself.
Also copied from the article.....
5. If necessary, open iTunes. You should see the following "recovery mode" alert: -
My ipod will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Maybe you are looking for
-
Windows 7 doesn't recognize my iPod Touch 4th generation after I upgraded the device to iOS 5.
Has anyone had any success with syncing a 4th generation iPod Touch in Windows 7 64-bit after upgrading the iPod Touch to iOS 5? Up until I upgraded the device's OS I couldn't for the life of me stop iTunes from popping up and trying to sync anytime
-
Trying to delete pages 21-24 on iPhoto book but "remove pages" option grayed out and pressing delete button not doing anything. These extra pages resulted from using Autoflow and now we can't seem to get rid of them. Help!
-
It seems from a number of archived posts that Master Objects dont work when in page layout mode. The help menu says its possible but doesnt say how. I think this should be considered a bug as Page layout needs master as much as word processing. Any t
-
GRC-AC CUP 5.3 SP11 UAR Admin Review
Hi All, We are on GRC-AC v5.3 SP11 and we are implementing UARs. My question is on the Admin Review functionality. The only "pushbutton" options are "Change" and "Cancel Request(s)". However, we have noticed in our testing that the only ones that get
-
LG Lucid, overheats, won't stay charged, 2nd one I've owned.
I had the first one for a little over a year when one day it decided to overheat, so I took out the battery. Let it cool down, turned it back on, noticed the battery was nearly dead. So I plug it in, it won't charge, and discharges in under in owner.