IOS 6 Maps and Power Save

Hi guys;
My screen keeps powering down and locking when using maps. Is there any way to prevent this from happening? It shoud be simple, since Waze has the feature built right into the app.
SInce Maps is supposed to be 'crowd sourced' it seems ridiculous that it locks out unless I want to disable power save mode on my phone. Is there a way to have Maps keep the phone awake, and if not, could that be built into the next update?

A lot of people are having problems with Passbook right now. Maps is a brand new service that has just been activated.
Be patient. Your operating system isn't even a day old. I can't believe that right after downloading the new update, you're already looking for ways to get rid of it. People can never be satisfied.

Similar Messages

  • Error when installing Toshiba Tools and Power Saver

    Hi,
    I have a Satellite A100-771 and installed Windows XP Professional with SP2.
    Afterwards I installed all drivers. After that I wanted to install the Toshiba Utilities and have got an error message : "Toshiba common Module not found! This setup will terminate."
    Furthermore I tried to install the Power Saver Tool, which is more important as the uilities I think. And here I have got the error message: "A fatal error has occurred. This program will be terminated. Code:0x7E"
    I am not sure what I can do else. I also installed the hotfixes for Windows which are on the ToolCD from Toshiba. But the problem is still there.
    The difference between both errors is that the installation of the utilities setup stop before finishing installation. On the Power Safer installation, it finished on 100% and terminate the setup or the program after the installation.
    May somebody can help me.
    Eathen

    There is a specific order that the Toshiba utilities and drivers have to be loaded in. This list is on the Toshiba download page, and the common modules is one the first utilities that has to be loaded for the others to work

  • Satellite A60-122: Cooling regimes and Power Saver bug

    There are two cooling methods available for my laptop: 'Max Performance' and 'Battery Optimized'. Well, I have read what the manual says about these regimes, but my observations are a little bit different. I found out that under the 'Battery Optimized' regime only the primary fan is working (the one with the processor), while under the 'Max performance' regime the secondary fan is operated.
    The trouble is in switching between the regimes: once 'Max performance' is turned on, and then the computer is switched back to 'Battery Optimized', the secondary fan will never stop. It is very disturbing, since the secondary fan is sort of noisy. Any ideas how to fix this problem?
    I have got the latest BIOS version (1.90) as well as the latest Power Saver program.

    Hello
    Sorry but I dont believe you are hardware engineer, hardware designer or maybe software developer to define some behavior as bug. Or I am wrong about it? ;)
    How old is your A60? Have you ever cleaned the unit and remove the dust? Can the unit be cooled properly? Please clean it properly and unit will be able to take a breath. That means the cooling fans will run slowly and definitely not so often. After cleaning my old Satellite P20 (three cooling grills) notebook was much quieter.
    Power saver is created for battery optimization and allow user to define how the notebook should work with battery or AC power supply. This optimization means lower power consumption and longer work with battery power supply.
    > The trouble is in switching between the regimes: once
    > 'Max performance' is turned on, and then the computer
    > is switched back to 'Battery Optimized', the
    > secondary fan will never stop. It is very disturbing,
    > since the secondary fan is sort of noisy. Any ideas
    > how to fix this problem?
    This is very interesting issue and I have tested it on my notebook and it works well. I have switched few times between profiles and the result is always the same: the fun runs under max performance but every time when I switch to battery optimized the cooling fan stops immediately. Try please to create own profile with minimum level of CPU activity and cooling method. Connect it to AC power supply and with FN+F2 switch between the profiles.
    At the end, if there is some bug I believe in last two years (the unit should be about two and half years old) it should be fixed long time ago.

  • Z77a-g43 and power save mode

    All parts are new.
    ASUS gf gtx 560 ti dcII top, corsair 8 gb memory, intel core i5-3570K, 3,4GHZ soc 1155, corsair 600w, msi Z77A-G43 Intel Z77 1155 ATX
    Everything was running just fine for one hour. Loaded windows 7 /64 and some servicepack. Then suddenly I got the "power save mode". I´ve tried a different graphic-card with the same result. Took out the bios battery but that didnt hlp. Then tried another corsair 600w but no... The comp. starts, but with a black screen. No usb is working. Tried the blue vga on the motherboard but still a black screen. No beep.
    So, what to do? Buy a nother mb?

    Here are some other ideas:
    1.) repeat the process with a single stick of ram try each stick / try different dimms to see 1 stick is fault or a dimm is faulty.
    2.) Remove and re-seat the cpu, while the cpu is out, check the pins for damage.
    3.) Remove the mobo from the case and check for foreign objects shorting it out, while it is out, build the computer on a non-conductive surface with 1 stick of ram, cpu, cooler and psu and test.
    Pay careful attention to extra stand offs under the motherboard.

  • Early 2013 15" rMBP (LG) Screen and Power Save Problems

    OK, so the first frustration is that I have this new 15" rMBP set to never sleep while on power.  I routinely come back to it, only to find that I am logged out and all of my apps have been closed.  Very annoying.  But now also this:
    Only way to solve is to close lid and re-open or reboot.  Do you bright folks think this is firmware/software related or is it because I lost the lottery and got an LG screen?

    When you say NEW what do you mean by that? If it is older then a couple of weeks it really isn't NEW, at least the way I think (New is I bought it yesterday to several days ago). If it is less then 14 days old take it back and return it for a full refund. Apple has a 14 day No Questions Ask Return Policy for Full Refund. Then buy another that may work correctly.
    If older then 2 weeks then the only thing you can do it take it to Apple and have them fix it, if possible, or replace it with one that works correctly.

  • Power saver Utility does not run on new OS

    Hello there,
    I have reinstalled win XP pro Hun SP2 ED.4 codename:Simplicity on my freshly bought toshiba laptop A110-253. My question is the following:
    How can I install the Power Saver Utility on it?
    I have downloaded the utility from the official Toshiba EU website: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    There were 2 subcategories in the Stellite A110 series: (PSAB0) and (PSAB6)
    It confused me a little bit, though i did not worry too much about it, I tried to install both, with no success
    At the time when I aim at running the install file the following error alert pops up:
    16-bit programme cannot be run Under Windows / It should be something similar to this one in the English version /
    All the other utilies were installed properly and they run properly. I would not like to install the Windows with the help of the Recovery CD, I prefer the one that I use now.
    Having my laptop without the Power Saver Utility is rather embarrasing as I am constantly on the move and do not have the possibility to refill batteries all the time.
    I hope someone can help me.
    Thank you in advance!
    Message was edited by: beigli69

    Hello
    If you check notebook model label at the bottom side you will find right model number. I presume it must be satellite A110-253 (PSAB6E). Am I right?
    So now choose the right notebook model and download Power Saver Driver V2.42.0.4C and Power Saver Utility V7.03.07C. I presume you know that installations order is very important and if you check Installations instructions you will see that Power saver Driver is listed at first and also must be preinstalled at first.
    By the way: it is always useful to create Tools & Utilities CD before you install own OS. Doing this you must not download anything just use this CD and install all necessary stuff in listed order.
    Bye

  • Power Saver 7 on Tecra 9000

    Hi everybody,
    I realized that newer versions of Toshibas Power Saver are
    available for newer Tecra Notebooks. I am using Power Saver 4 on my Tecra 9000. I just tried to install the latest version of PowerSaver on my Tecra 9000. The installation seemed to work, but after finishing the procedure, a error sound accured and power saver did not start correctly, but I have got no error massage. If I try to start the power saver manually I only get an error massage, that I have no permission to start the process!
    Is it possible to install and use a newer version of power saver on the Tecra 9000? What is the highest version I can use on the Tecra 9000? Hopefully not version 4?!
    best regards
    Matty

    Hi Matty
    Can you please tell me did you have any problems with Power saver? For every notebook series and for every notebook model there are aligned versions for each model and you can use just Power saver that is made for your 9000 model.
    Believe me the best version for your Tecra is version that you can find on Tools & Utilities CD. If there is no problem with Power saver it is not necessary to make any update.

  • Portege R700 - Installed Power Saver on Windows 7 64bit

    Hi,
    I was looking for a way to reduse fan noise on a Win7 Portege R700-174 and read to install "Power Saver" from the Toshiba support site.
    Installation was OK, but I cannot use ist because Common Module is not installed. I get an error "Code: 0x2". I already understand that "Power Saver" and "Common Module" is not intended for windows 7. Why have I been able to install it anyway?
    Now when I try to remove "Power Saver" i get yet another error and uninstall fails.
    What can I do? Any help is appreciated!
    Regards
    Michael

    Hey,
    Toshiba Common Modules and Power Saver are designed for Windows XP only! This software isnt compatible to Vista and Windows 7. In this case you have to install Value Added Package.
    Anyway, not its too late and you must remove the installed software. If you get an error while uninstalling I would recommend using CCleaner to remove the programs. CCleaner can also uninstall all software that you have installed and its freeware tool. Do a Google search to download it and try uninstalling the Toshiba tools again.
    Check this!!!

  • Sattelite A110-178 - Toshiba Power Saver for Vista?

    Doest Toshiba Power Saver exists for vista? I liked it when working under XP, but now i switched to Vista Ultimate, and the XP-version doesn't work under Vist...
    Thanks in advance!

    Hi
    Toshiba has also developed and Power Saver for Vista and if will be installed with the Vista Added Package.
    But the Toshiba power saver for Vista doesnt look like the Power Saver for Win XP.
    Toshiba Power Saver for Vista is a part of the Vista power options and you can find some additional entries in the Vista Power Options.
    But you will not find a stand alone Toshiba Power Saver like for Win XP.
    Bye

  • Toshiba Satellite Pro M30 & Power Saver shutdown error

    hello!
    i am fighting with this problem for months now.. the latest version of power saver on my toshiba sat pro m30 running windows xp with service pack 1 installed gives a message box with an error message on shutdown and i am unable to eliminate this error. unfortunately, i cannot consider re-installing the system from scratch, because there are many other applications installed and i cannot lose settings for them. i've read the forums and realised i am not the first one having problems with toshiba power saver. i am even lucky to have it started successfully at the start-up! yet, it crashes at the shutdown. it's quite annoying. also, i have downloaded all latest updates from this site for my laptop, including even bios update.
    i would love to have the opportunity to be able to download the bug-free version of toshiba power saver from this site, and i am sure many other people would appreciate the fixes too!
    any feedback on that?
    andrew.

    hello Quad,
    > If your Notebook is properly installed it should work
    > well. All delivered software was tested. The only
    > reason for your problem can be some additional
    > software that you installed later.
    my notebook was properly installed and power saver indeed had not been crashing from the very beginning. it started to crash at shutdown after a month of work with my laptop. how can it be that no other application is crashing elsewhere, and only the power saver application does? do you not find it slightly irrelevant to point me again to recovery CD? especially, when i mention that re-installing everything from scratch is not an option for me? moreover, i didn't install anything ultra-specific that loads at startup. in fact, i try to keep my system as clean as possible. no Antivirus, no SP2, no weird background processes.
    > It is also possible that it can be caused by some
    > Antivirus application. Maybe is some application
    > running in background? There are lots of reasons who
    > can be responsible for this issue.
    there is logic in your words, but as i said, there are no specific applications installed to be running in the background, except ASIO drivers for the external sound interface, but they were working fine from the beginning with power saver. no antivirus installed either.
    and please do not refer to your particular configuration as a standard. all configurations become different as time passes from the original installation. :>
    regards,
    andrew

  • Save maps and AP's on WCS

    I am just testing WCS (4.0 I think), but when I shut the server down all AP's and maps are gone!
    In the test environment it is no BIG problem, but what happens when the power fails in the production env.?
    Is there a way to save?
    Thanks
    Michael

    Thanks, I found the solution!
    When you backup the configuration (Admistration -> Scheduled Tasks) , maps and APs are saved. Only I turned the WCS off before the scheduled backup, but you can check 'Configuration Backup' and than 'Execute Now' from the drop down list.
    Michael

  • I am looking for a map app that will allow me to place pins where my clients offices are on a map and keep them save every time I open the app. Does anyone out there know of an app that will do this?

    I am looking for a map app that will allow me to place pins where my clients offices are on a map and keep them save every time I open the app. Does anyone out there know of an app that will do this?

    "Motion 5" is your friend.
    Michael Wohl has a nice 15 video series (free) about Motion 5 at http://www.macprovideo.com/tutorial/motion5101-overview-and-workflow-guide (right side)
    This is a "teaser" series to sell his tutorials but it is really good. Just saw it yesterday for the first time.
    While all you want is just to place pins, realize that Motion has so much more. All kinds of effects and they can be really customized. Maybe put their street address, contact name, and phone number by the pin?
    Motion 5: cheap at $49.99 (just got my download two days ago)
    Motion 5: Support Community athttps://discussions.apple.com/community/professional_applications/motion_5
    If you're using the map for, say, deliveries, and use an iPad, what you could do is have a general map of the area imported into Motion, create the pins and whatever, then save (share?) it to the iPad.
    Disclaimer: I have virtually no relationship with anything connected with this tutorial product, developer, or anything.

  • Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black.  Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in, any ideas?

    Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black.  Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything.  Looks like the screen is on it's just unresponsive and black obviously.  Has anyone had this problem?  I was updating via wifi right in front of my router and my computer.

    Spoke to a "senior advisor" in the Apple TV department.  Her suggestions:  change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers.  So she confirms that the problem is one of connection to router suddenly dropping out.
    My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue.  It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more.  Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
    My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department.  Make them aware of this problem!

  • Installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug.  is this corect? I am unable to use the phone now.  What should i do next? I plug in to itune in my computer and ask me to restore my phone?

    installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug. 
    I am unable to use the phone now.  What should i do next? I plug in to itune in my computer and ask me to restore my phone? I will loose all my date?

    I hooked up itune and restore.  after finished restores, it said my phone is in recovery mode and needs to be finish before using itune, my screen still show the itunes icon and power plug

  • I installed iOS 7 and it deleted some of my contacts, as expected, so I just resaved them all. There's one particular number that will save but in my messages, it shows up as the number instead of the name saved. How do I fix it? And why is it doing that?

    I installed iOS 7 and it deleted some of my contacts, as expected, so I just resaved them all. There's one particular number that will save but in my messages, it shows up as the number instead of the name saved. How do I fix it? And why is it doing that?

    I had this problem too, I fixed it by going to my settings and under general at the bottom there is a reset option, go there. One of the options should be reset network settings, select that one. I’m not sure why it happens but that worked for me; hope you have the same luck!

Maybe you are looking for