IOS 6 Maps - Modify Route?

Is there any way to modify a route that Apple Maps is giving me? I get 3 choices of routes but none of them is the route I need. I want to grab that route and drag it to the next road over! Like I can do with maps.google.com

A hard reset sorted it out for me (press and hold Home & Sleep/Wake button until you see the Apple logo)

Similar Messages

Auto reroute on iOS Maps on iPhone 4?

Trying out the new Apple Maps app on iOS6 on my iPhone 4.
While driving down the road, if I accidentally go off course, maps doesn't do anything to recalculate my route and get me back on track?
How do I get it to reroute if I go off course?

Extremely disappointing. I was expecting that the upgrade to Apple Maps was going to at least offer some sort of improvement over the Google Maps based app we previously had.
This makes iOS Maps an utterly lose/lose situation.
Gotta say, as a former Apple employee, an iPhone owner since the 3GS, the owner of a new iPad and the owner of numerous iPods over the years, even my faith is crumbling and I'm starting to think about ditching Apple for Android.
They aren't making it easy for us loyalists to keep evangelizing the products...

Why doesn't IOS Maps show a map any more?

So, when I was stuck in New York city for five days last week, I wound up using the new IOS maps app for the first time, on my iphone 4.
It worked fine for a day or two... then, for some reason, it stopped loading maps.
It would show a blue dot where I'm at, and little traffic warnings would appear, but no streets, no nothing.
If I tell it to load satellite views, that works fine, but regualr maps doesn't.
Now that I'm finally back home in LA, it's still doing the same thing.
I've manually closed the app, and done a hard reboot on the phone, and it still does the same thing.
Seriously, having a map app that stops working when you're stranded in a strange city with a hurricane barrelling down on you and you're trying to walk from your power-out old hotel to a new one was no fun...

Sorry I thought you meant that you just closed (suspended) the app. Unfortunately I haven't heard of this problem before and haven't seen and KB articles on troubleshooting maps. If closing Maps, then restarting the phone didn't fix it, guess I would make an appointment with the genius bar at a nearby Apple store and have them take a look at it.

Show more than 10 points in iOS Maps Api?

Does someone know how i can show more than 10 points in the iOS Maps Api?
I am searching for some shop´s in the user´s location. 10 points are not enough.
Has somebody an idea?

Does this have anything to do with Adobe Air?

IOS Maps Upgrade?

How do I update the "Maps" app with street new construction and changes to areas areas near me.. Google Maps shows a new road near my house constructed last year. But iOS Maps does not show it.
Thanks, Tony

Click the small "i" in the circle in the lower right of Maps. Then choose "Report a Problem", and report the map discrepancy.

Class-map || High Router utilization

Hi Team ,
Good day!!!
I have one very basic question regarding the class- map.
We have implemented QOS by defining some set of classes with the percentage of bandwidth in each class.
now a days i could see lot of routers in the organization i work for having issues with the high utilization .
we heard that the ISP has changed their configuration of QOS.
is it like both the customer and ISP should have the same kind of configuration to have my router work properly ?
if one class is being highly utilized, will it affect the entire router performance ?
Thanks
Praveen

Hi parveen,
It's a common problem after implementing QOS, plz share the details of hardware and software.as well as At the beginning you can start your troubleshoot with these documents:
http://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/ios-software-releases-121-mainline/12809-tuning.html?referring_site=bodynav
http://www.cisco.com/c/en/us/support/docs/routers/10000-series-routers/15095-highcpu.html?referring_site=bodynav
HTH
Kazim Abbas

IPad 2 wi-fi with iOS maps turn by turn?

I have iPad 2 wi-fi. If I buy a gps receiver such as the Dual XGPS150a, will I be able to use turn by turn navigation with Apple iOS 6 maps, or will i need to buy an app such as Navigon with preloaded maps?
I guess my 2 questions are:
1) Do I need data access as well as GPS to use Apple Maps in iOS 6, or do I just need GPS?
2) Is the Maps software different for wi-fi only iPads vs. those with cellular capability? i.e. if I was connected to wifi and had a bluetooth GPS receiver, could I even then use the Maps software on iPad 2 wi-fi?
I guess I could use my phone as a wireless hotspot and buy a gps receiver to use my iPad for GPS, but if that's the case, I could just use my phone....
I'm just curious of the capability. Thanks!

I have a dual GPS receiver that I frequently use with my iOS devices. Unfortunately, the Maps application on my WiFi iPad doesn't have any of the GPS functionality, even when the Dual GPS is paired. It seems that Apple chose not to include the functionality, as I am able to use my external GPS with the maps turn-by-turn navigation on my iPhone without issue.
This is very disappointing

5800 OVI map not routing

Hi All,
The sat nav on the 5800 is really good but I'm getting a slight issue with routing.
I searched an address by road and house number and county. It was found by the software but when I came to drive to it today I got a message "Route not found".
I then manually entered the postcode in the search bar and the route was then calculated correctly.
It isn't the first instance of this problem.
Any ideas as to why this has happened please?
Many thanks.

Did you download the new maps through maps updater .
It normally asks to delete old maps before installing new maps .
jje

Query Skill Group - Translation Route mapping from Routing Script

Hi,
Is there a way we can query against the individual routing scripts and extract the PSG-TR mapping?
In ICM we can map any particular Peripheral Skill Group (PSG) to a specific Translation Route (TR) defined on the same Peripheral Gateway through ICM routing scripts.
The PSG and TR are both configured through ICM configuration manager and the details are stored in the ICM DB which can be queried against.
However the mapping between the PSG and TR is done through a routing script using Script Editor.
We would like to make an SQL query where we can see PSGs associated to a Translation route on Routing Scripts.
Product: Unified Contact Center Enterprise (UCCE)
Version: 8.5(4)

Hi Gergely - how would you then query this data if you required it? Is there a way to map the PSGs to the Translation routes they are associated to?
Thanks!

IOS IPS 3845 router

The IOS IPS keeps failing. For some reason it sends the alerts to MARS and then all of a sudden the IPS is disabled on the interface. This config. was down through SDM.

CS-MARS also integrates tightly with Cisco's premier security management suite, Cisco Security Manager (CSM). This tight integration maps traffic-related syslog messages to the firewall policies defined in CSM that triggered the event. Policy lookup enables rapid, round-trip analysis for troubleshooting firewall configuration-related network problems, policy configuration errors, and fine-tuning defined policies.
http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/prod_tech_notes_list.html

Issue when update ios for 7206 router

hi all ,
the ios on router was 12.4
i put the ios
c7200p-adventerprisek9-mz.152-4.M5.bin
in disk2 , of router
and added
boot system flash disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin
after that ,
i restarted the router
i have the followign logs :
7200Gateway#reload
Proceed with reload? [confirm]
*Jan 11 15:24:11.469: %SYS-5-RELOAD: Reload requested by m0ulngateway on console. Reload Reason: Reload Command.
*Jan 11 15:24:11.681: %BGP-5-ADJCHANGE: neighbor 213.244.66.77 Down Peer closed the session
System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Socket jumper: not present Failsafe jumper: present = normal
FPGA revision 0x00000026
C7200 platform with 2095104 Kbytes of main memory
Readonly ROMMON initialized
Self decompressing the image : ################################################################################################################################# [OK]
%SYS-6-CLOCKUPDATE: System clock has been updated from 15:26:31 UTC Sat Jan 11 2014 to 17:26:31 Israel Sat Jan 11 2014, configured from console by console.
% No interface specified for interface_command
X121 address and queued type can not be configured on the same rotary group 1
%SYS-3-IMAGE_TOO_BIG: 'disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin' is too large for available memory (46143512 bytes).
%SYS-6-READ_BOOTFILE_FAIL: disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin File read failed -- Not enough space.
%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
boot of "cisco2-C7200" using boot helper "bootflash:c7200p-kboot-mz.124-4.XD5.bin" failed
error returned: File read failed -- Not enough space
loadprog: error - on file open
boot: cannot load "cisco2-C7200"
System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Socket jumper: not present Failsafe jumper: present = normal
FPGA revision 0x00000026
C7200 platform with 2095104 Kbytes of main memory
Readonly ROMMON initialized
Self decompressing the image : ########################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################### [OK]
*** No sreloc section
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version 15.2(4)M5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 13-Sep-13 19:12 by prod_rel_team
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Installed image archive
Cisco 7206VXR (NPE-G2) processor (revision A) with 1966080K/65536K bytes of memory.
Processor board ID 13252317
MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2
6 slot VXR midplane, Version 2.0
Last reset from power-on
PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb1 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.
1 FastEthernet interface
3 Gigabit Ethernet interfaces
2045K bytes of NVRAM.
250880K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
65536K bytes of Flash internal SIMM (Sector size 512K).
Warning: The CLI will be deprecated soon
'enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Please move to 'enable secret <password>' CLI
max-reserved-bandwidth 95
   ^
% Invalid input detected at '^' marker.
Press RETURN to get started!
============================
focusing on the red lines above .
is there ANY THING WRONG ?????
AFTER THat i have sh ver :
7200Gateway#sh version
Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version 15.2(4)M5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 13-Sep-13 19:12 by prod_rel_team
ROM: System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
7200Gateway uptime is 10 minutes
System returned to ROM by reload at 17:24:07 Israel Sat Jan 11 2014
System image file is "disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 7206VXR (NPE-G2) processor (revision A) with 1966080K/65536K bytes of memory.
Processor board ID 13252317
MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2
6 slot VXR midplane, Version 2.0
Last reset from power-on
PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb1 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.
1 FastEthernet interface
3 Gigabit Ethernet interfaces
2045K bytes of NVRAM.
250880K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
=====================
focus on bold line ,
did the router get the new iso without problems ????
wish to clarify
regards

You are right, whenever Cisco device boots, the IOS files gets loaded on the DRAM.
But in this process, some temporary files are also generated which gets saved in the flash/Disk, that’s the only reason you got these error messages. It’s not recommended at all to have less space in the Flash than what is recommended on Cisco.com. I would say please remove some files from Disk and have minimum 256 MB flash otherwise your router may drop into rommon mode at the time of next reload.
Well, it’s good to upgrade the bootstarp image too. Currently you are running 15.X IOS code, I would say run 15.X bootstarp image on the box.
You may download bootstarp image for 7206VRX NPEG2 from the link below:-
http://software.cisco.com/download/release.html?mdfid=282188585&flowid=1380&softwareid=280805685&release=15.2.4S4&relind=AVAILABLE&rellifecycle=ED&reltype=latest
If you want to know the procedure of the upgrade, click the link mentioned below:-
http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf010.html#wp1017654
-Amant

Error compiling for IOS "map failed"

Since i have installed Flash Builder 4.6 I allways get an error when I compile for Device "Map Failed".
Compiling for Desktop works fine. When I used Flash Builder 4.5.1 I had sometimes the same problem,
but sometimes compiling worked.
here is the logfile:
!ENTRY com.adobe.flexbuilder.project 4 43 2011-12-07 12:16:06.832
!MESSAGE Map failed
!STACK 0
java.lang.Exception
    at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1019)
    at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
    at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
    at com.adobe.flexide.multiplatform.ios.packaging.IPAPackager.create(IPAPackager.java:276)
    at com.adobe.flexide.multiplatform.ios.launching.IOSOnDeviceLaunchHandler.doPackage(IOSOnDev iceLaunchHandler.java:314)
    at com.adobe.flexide.multiplatform.ios.launching.IOSOnDeviceLaunchHandler.launch(IOSOnDevice LaunchHandler.java:185)
    at com.adobe.flexide.launching.multiplatform.MultiPlatformLaunchDelegate.launch(MultiPlatfor mLaunchDelegate.java:191)
    at com.adobe.flexide.launching.AbstractFlexLaunchDelegate.launch(AbstractFlexLaunchDelegate. java:244)
    at com.adobe.flexide.launching.AbstractFlexLaunchDelegate.launch(AbstractFlexLaunchDelegate. java:134)
    at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:854)
    at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:703)
    at org.eclipse.debug.internal.ui.DebugUIPlugin.buildAndLaunch(DebugUIPlugin.java:928)
    at org.eclipse.debug.internal.ui.DebugUIPlugin$8.run(DebugUIPlugin.java:1132)
    at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
!ENTRY com.adobe.flexbuilder.project 4 43 2011-12-07 12:16:07.520
!MESSAGE Fehler beim Verpacken der Anwendung:
Map failed
What can I do ?

I am getting a similar error when exporting a release build for ios.
It seems to be caused by the number of assets I include in the project. If I remove all of the video assets from the package it builds a working release. When the video assets are included, it fails to export the release build with the error "map failed".
So it seems to be the number of assets included or the total size of the included assets that causes the error for me. But I can't find a way around it so can't currently export a release build with all the required assets.
I'm starting to wonder wether I'm going to have to write some kind of "updater" to download all the required assts to the iOS device when the app is first run, which isn't ideal.

HT5429 What can I do about the fact that IOS maps no longer shows my home street correctly on the map?

It showed correctly under Google maps but whole sections of the street are missing under IOS 6.
I have tried reporting the problem via the recommended method and received no response. I know that this is also a problem in Tom Tom because I discovered after paying a significant amount for their iPhone app only to find my address missing on their maps. I tried reporting it to them months ago and they made no change in their app or maps. I do not live in a remote area but a within the city limits of metropolitan area and the house has been here since 1929, giving Apple and Tom Tom ample time to get it right!
I am very disappointed that neither Apple or Tom Tom have not even responded to my request despite my investment in their products.

lkrupp wrote:
RCGlass wrote:
to our iDevices.
I personally am waiting for Google to release a new map app for IOS. Unfortunately it won't be nicely integrated into other apps unless other developers realize, like they have with DropBox or Box, that there are sometimes better alternatives to meeting individual needs than what Apple chooses to foist on us
If the maps issue is so important and debilitating to you then get rid of your Apple devices and buy Android. You claim that Apple "foists" things on its users. Leave the platform. Problem solved. Is it really that hard to understand? Why stay with a company or product you despise or are unhappy with? What is it with people ike you anyway?
What exactly do you mean by "people ike[sic] me?" You presume to know me from a few words I have written here?! I am not enough of a true believer to suit you?! I dare to question decisions that others have made that affect me?!
Well I will share one thing about me. I am a long time Apple user and supporter (Mac Plus) but I am also a firm believer in the maxim, "If it aint broke, don't fix it!" It seems to me the only thing Apple sought to fix in their switch to Tom Tom's mapping data was their link to a growing competitor, Google. The many complaints from those with a signifcant investment in affected Apple products like me (2 iPads, 2 iPhones, 2 iPods) are well founded and deserving of a voice. There have been many problems with the new map data reported and not a lot of bravos. I have read on a similar thread to this one the Apple has said it may be 2-3 years to get the maps up to speed.
I don't know about you, but the Google maps data was working fine for me including all the other apps it integrated with. So why should I have to go out and spend my hard earned money on another platform? Why should I not expect that Apple will be responsive to its users if we raise our voices in protest of an uneeded change that has produced bad results.
Maybe my choice of the word "foist" (to introduce or insert surreptitiously or without warrant) was a little strong but who here feels they were consulted by Apple before they made this major switch that affects so much of the functionality of their portable devices?

Route-map, vlan routing

I have a 6509 that I've setup with route-maps in order to route VLANs in different ways. For example, if we wanted some vlans to get out to the internet we would route them to a certain address. Then there is another vlan that we route to another internet gateway. It was all working pretty good until we swapped out another switch gateway in the network and every since things have been wonky. It seems as though the switch is routing packets that would normally stay on that switch out of the switch then back in, even though my access-list are set to deny the traffic. Here are the access-list and route-maps:
access-list 10 permit 192.168.24.101
access-list 10 permit 192.168.24.102
access-list 100 permit tcp any 172.16.0.0 0.0.255.255 established
access-list 100 permit tcp 192.168.4.0 0.0.3.255 host 172.16.1.10 eq www
access-list 100 permit tcp 192.168.4.0 0.0.3.255 host 172.16.1.11 eq www
access-list 104 permit ip host 172.16.4.11 host 65.54.150.19
access-list 104 permit tcp host 172.16.4.20 any eq www
ip access-list extended BITCENTRAL_INTERNET
deny ip 172.16.0.0 0.0.255.255 172.16.0.0 0.0.255.255
deny ip 172.16.0.0 0.0.255.255 192.168.4.0 0.0.3.255
deny ip 192.168.4.0 0.0.3.255 172.16.0.0 0.0.255.255
permit ip host 172.16.1.170 any
permit ip host 172.16.1.150 any
ip access-list extended EDIT_BAYS
deny ip any 172.16.0.0 0.0.255.255
deny ip 172.16.0.0 0.0.255.255 any
deny ip 192.168.4.0 0.0.3.255 172.16.0.0 0.0.255.255
permit ip host 192.168.25.2 any
permit ip host 192.168.26.80 any
permit ip host 192.168.25.104 any
permit ip host 192.168.25.3 any
permit ip host 192.168.26.69 any
permit ip host 192.168.26.71 any
permit ip host 192.168.27.33 any
ip access-list extended ENPS
deny ip 172.16.0.0 0.0.255.255 172.16.0.0 0.0.255.255
deny ip 172.16.0.0 0.0.255.255 192.168.4.0 0.0.3.255
deny ip 192.168.4.0 0.0.3.255 172.16.0.0 0.0.255.255
permit ip host 192.168.24.101 any
permit ip host 192.168.24.102 any
permit ip host 192.168.24.103 any
ip access-list extended ENTRIQ
deny ip 172.16.0.0 0.0.255.255 172.16.0.0 0.0.255.255
deny ip 172.16.0.0 0.0.255.255 192.168.4.0 0.0.3.255
deny ip 172.16.0.0 0.0.255.255 192.168.24.0 0.0.3.255
deny ip 192.168.24.0 0.0.3.255 172.16.0.0 0.0.255.255
deny ip 192.168.4.0 0.0.3.255 172.16.0.0 0.0.255.255
permit ip 172.16.8.0 0.0.0.255 any
ip access-list extended MISC
deny ip 172.16.0.0 0.0.255.255 172.16.0.0 0.0.255.255
deny ip 172.16.0.0 0.0.255.255 192.168.4.0 0.0.3.255
deny ip 172.16.0.0 0.0.255.255 192.168.24.0 0.0.3.255
deny ip 192.168.24.0 0.0.3.255 172.16.0.0 0.0.255.255
deny ip 192.168.4.0 0.0.3.255 172.16.0.0 0.0.255.255
permit ip 172.16.11.0 0.0.0.255 any
ip access-list extended Omneon
deny ip 192.168.4.0 0.0.3.255 172.16.0.0 0.0.255.255
deny ip 172.16.0.0 0.0.255.255 192.168.4.0 0.0.3.255
deny ip 172.16.0.0 0.0.255.255 172.16.0.0 0.0.255.255
permit ip host 172.16.2.11 any
permit ip host 172.16.2.2 any
ip access-list extended ROSS-VLAN
deny ip 172.16.0.0 0.0.255.255 172.16.0.0 0.0.255.255
deny ip 172.16.0.0 0.0.255.255 192.168.4.0 0.0.3.255
deny ip 192.168.4.0 0.0.3.255 172.16.0.0 0.0.255.255
permit ip host 172.16.4.20 any
permit ip host 172.16.4.32 any
permit ip host 172.16.4.31 any
permit ip host 172.16.4.29 any
permit ip host 172.16.4.30 any
permit ip host 172.16.4.28 any
vlan internal allocation policy ascending
vlan access-log ratelimit 2000
interface Vlan1
no ip address
shutdown
interface Vlan10
ip address 172.16.1.1 255.255.255.0
ip policy route-map BITCENTRAL
interface Vlan20
ip address 172.16.2.1 255.255.255.0
ip policy route-map OMNEON
interface Vlan30
ip address 172.16.3.1 255.255.255.0
interface Vlan40
ip address 172.16.4.1 255.255.255.0
ip policy route-map ROSS-VLAN
interface Vlan50
ip address 172.16.5.1 255.255.255.0
interface Vlan60
ip address 172.16.6.1 255.255.255.0
interface Vlan70
ip address 172.16.7.1 255.255.255.0
interface Vlan80
ip address 172.16.8.1 255.255.255.0
ip policy route-map ENTRIQ
interface Vlan100
ip address 192.168.27.1 255.255.252.0
ip helper-address 192.168.7.255
ip policy route-map OMNIBUS-VLAN
interface Vlan110
ip address 172.16.11.1 255.255.255.0
ip helper-address 192.168.27.200
ip policy route-map MISC
interface Vlan120
ip address 172.16.10.1 255.255.255.240
ip policy route-map EDIT_BAYS
interface Vlan140
ip address 192.168.4.15 255.255.255.0
ip directed-broadcast 10
interface Vlan500
ip address 192.168.1.19 255.255.255.224
ip classless
ip route 172.22.0.0 255.255.255.248 192.168.4.1
ip route 192.168.0.0 255.255.255.224 192.168.4.254
ip route 192.168.5.0 255.255.255.0 192.168.4.1
route-map BITCENTRAL permit 60
match ip address BITCENTRAL_INTERNET
set ip next-hop 192.168.4.1
route-map EDIT_BAYS permit 50
match ip address EDIT_BAYS
set ip next-hop 192.168.4.1
route-map ENTRIQ permit 80
match ip address ENTRIQ
set ip next-hop 172.16.8.254
route-map MISC permit 40
match ip address MISC
set ip next-hop 192.168.4.1
route-map MSN permit 10
match ip address 104
set ip next-hop 192.168.4.1
route-map OMNEON permit 20
match ip address Omneon
set ip next-hop 192.168.4.1
route-map OMNIBUS-VLAN permit 30
match ip address EDIT_BAYS
set ip next-hop 192.168.4.1
route-map OMNIBUS-VLAN permit 40
match ip address ENPS
set ip next-hop 192.168.4.1
route-map ROSS-VLAN permit 70
match ip address ROSS-VLAN
set ip next-hop 192.168.4.1
route-map SEC-VLAN permit 30
match ip address SEC-VLAN
set ip next-hop 192.168.4.1
Here is how we tested the system and found the error. We cut the connection to 192.168.4.1 router, and when we try to ping a host on the 100 VLAN with the ip address of 192.168.24.101 from the MISC vlan with a ip address of 172.168.11.9 the ping just fails. When we enable the connection to the 192.168.4.1 router the pings go through again. What in my route-map is causing this, I thought I setup the deny rules pretty good?

Hi Mike,
Between you and me, this is a lengthy config you have there.
Next don't forget that a route-map doesn't apply to traffic originated or destined to the self-device, unless you use ip local policy in which might work, but there I have seen some nasty bugs.
So if you can shorten your config to one example, then do the tests :
- sourced from device A (it can be the SVI of another switch)
- through your 6509
- destined to device B (it also can be the SVI of another switch, or even simpler some loopback inteface).

Nokia Maps wont route to certain places !!

Hiya
Can someone please try this for me ?
Can you please try and route from GPS and Route to Loftus
See if you can get a route because mine gets stuck at Calculating route and I am wondering if I have an issue with my version
I dont know how many other places mine wont goto but this is a regular one.
Loftus should come up as Redcar or Saltburn when it finds it and is in the UK
Thx
Paul

I won't beat about the bush here, nokia maps is *bleep*
If I open the maps application and let it find a GPS signal as im driving along, the map on the handset is upside down ie if im travelling south the cursor on the map is travelling north it is following the route im going but the map is upside down, the GPS should recognise which way im going and turn the map correctly. Only when I plan a route does it correct itself and show the map the correct way up
Also, I have maps for Latvia installed on my mem card and if i zoom into street level and copy one of the major street names in Riga exactly as its spelt on the map then go back to search to search for that street it finds no results, it doesnt matter how many different ways i spell it it can't find it, many addresses I have searched for in Riga and it cant find them, yet when i zoom into the map and find it manually it is there, I'm off to Germany in December for the xmas markets (bah humbug) I have not yet installed the maps for Germany but I wonder if i will have the same problem
Moderator note: Please do not try to get around the bad language filter.Message Edited by michaels on 02-Oct-2007 12:28 PM

IOS 6 Maps - Modify Route?

Similar Messages

Maybe you are looking for